BC Variance from Bullet Jacket Damage Can Increase Vertical
Here’s a smart tip from Bryan Litz, explaining how damage to a bullet jacket can harm the projectile’s Ballistic Coefficient (BC). This tip is posted on Bryan’s new Bryan Litz Ballistics Facebook page. We recommend you subscribe to that page to access Bryan’s latest informative posts.
Bryan notes: “If the case mouth scratches the bullet when you seat it, the damage can cause the BC to be inconsistent, which shows up as vertical dispersion at long range.
We see this sometimes when running Doppler Radar for competitors at Applied Ballistics Mobile Lab events. If someone is shooting a bullet that typically has a very consistent BC (1% or less) but they’re seeing a higher BC variation, it can be due to the bullets being damaged in the loading process.”
The lead photo above shows the badly-scratched jacket of a bullet seated in a rough-mouthed case. To prevent such jacket damage, one should chamfer, deburr, and smooth case mouths after trimming.
Below is a recorded Doppler radar result showing excessive BC variation. Such variation can increase vertical disperson at long range. This can result in larger group sizes and lower scores.
Similar Posts:
- Bullet Jacket Scratches Can Affect BC and Long Range Accuracy
- Scratches on Bullet Jackets Affect BC and Long Range Accuracy
- Get Personal Drag Models with Applied Ballistics Mobile Lab
- Applied Ballistics Mobile Lab Maiden Voyage to Texas
- Crosswind Weighting Factor Explained by Bryan Litz
Share the post "BC Variance from Bullet Jacket Damage Can Increase Vertical"
Tags: Applied Ballistics, Ballistic Coefficient, BC variance, Bryan Litz, Bullet Jacket, Case Prep
