Dry Lube Inside Case Necks for Smoother Bullet seating

If you want smoother bullet seating, inside neck lube can help. Forum member Ackleyman II likes to add a little Mica powder inside his case necks before seating bullets. This is easily done with the Forster three-brush neck lube kit. Ackleyman tells us: “Many loads that I have will not shoot well with a dry neck compared to a neck that is cleaned and lubed with this [Forster Dry Lubricator] — the best $15 you have ever spent.”

The Forster Case Neck Lubricator features three brushes attached to a tough, impact-resistant case with holes for bench mounting. The brushes accommodate all calibers from 22 to 35 caliber. The kit includes enough “motor mica” to process 2000 to 3000 cases and has a cover to keep dust and grit from contaminating the mica. By moving the case neck up and down on the correct mica-covered brush, the neck can be cleaned and lubricated at the same time.

Function: Lubricate case necks for easier resizing
Contents: Kit with base, lid, and three nylon brushes
Lubricant: Includes 1/10 oz. of Motor Mica, enough to process 2000-3000 cases

Neck Lubrication After Ultrasonic Cleaning or Wet Tumbling with Pins
If you wet-tumble your cases with stainless media and solvents or ultrasonically clean your brass, you may find that the inside of the case necks get too “squeaky clean”. The inside surface of the neck looses lubricity. In this situation, applying a dry lube can definitely be beneficial. CLICK HERE to see story about ultrasonic cleaning.

Similar Posts:

• Case Neck Dry Lubrication Can Help Bullet Seating
• For Smoother Bullet Seating — The Dry Lube Option
• For Smoother Bullet Seating — Try Dry Lube Inside Case Necks
• TECH TIP: Dry-Lube for Ultrasonically-Cleaned Case Necks
• Ultrasonic Cleaning, Case-Neck Friction and Bullet Seating

Tags: Bullet Lube, Case Neck Dry Lube, Dry Lube, Forster Case Neck Lubricator, Mica Dry Lube, Ultrasonic Cleaning