What’s better than a super-accurate 6BR rifle? Well, two super-accurate 6BRs. This week we feature a pair of tack-drivers owned Forum member Mark Schronce. These “Brothers in Arms” share similar stocks, but otherwise the components are different. Mark’s 17-lb gray laminate Light Gun features a Hall action, HV taper barrel, and muzzle brake. The 21-lb Heavy Gun, in “Desert Camo” laminate, boasts a trick dual-port BAT action, and full-contour 30″ barrel without brake. Both guns shoot tiny groups, track like they’re on rails, and give Mark a serious hardware advantage in club competition.
Mark provides this report: “The Light Gun started as my 22-250 AI varmint gun, with a Hall action and McMillan Hunter Benchrest stock. I wanted to build a proper Egg Shoot gun, so I had Richard Franklin (Richard’s Custom Rifles) chamber a Lilja 12-twist in 6mm BR Norma, with a .262″ neck. Using Fowler 80gr FB bullets, the gun shot great right out of the gate. (See my report, Egg Shoots and 600-yard 6 BR). I was curious about the heavier 6mm bullets, so I had Richard chamber and fit a 1:8″ Krieger in 6BR. But this time we went with a .271″ no-turn neck. The Krieger holds quarter-MOA with the heavy bullets, and, to my surprise, it shot the 80s as well as the 12-twist Lilja did. For the 2005 season, I ordered one of Richard’s latest 008 F-Class stocks. This new design is very comfortable to shoot and it’s much more stable in the bags than my old Hunter stock. That added stability will be a big plus for 600- and 1000-yard benchrest matches.
A Heavy Gun for 1000-yard BR and “Belly Benchrest” (F-Class)
I’ve been active in 1000-yard Benchrest for a few years, shooting my 6mm BS and 6mm BR Light gun in both Light and Heavy classes. I wanted to build a rifle for the Heavy Gun Class yet stay within the 22-lb F-Class limit. And I wanted it to have the best hardware I could buy. On a BAT ‘MB’ action (with Jewell trigger) we fitted a 30″ 8-twist 3-groove Lilja, 1.250″ diameter, no muzzle brake. Richard cut the chamber for 6mm BR Lapua Brass, .271″ no-turn neck, throated for Sierra 107gr MKs, matching my current Light Gun. The stock is a pillar-bedded Richard’s 008 1000-yd/F-Class model, with 10 coats of auto clearcoat, all work by Richard. Burris Zee rings hold a Leupold 8.5-25×50 LRT mounted on a BAT one-piece Weaver base. The Heavy Gun weighs in at 21 lbs, much lighter than most Heavy Guns (50 to 100 lbs). But with the 6BR’s light recoil, it’ll do just fine for long range, yet still make weight for F-Class.
Why a 6mm BR Chambering in a Heavy Gun?
I toyed with the idea of going with a 6BR Improved for Heavy Gun, but I’m not convinced the Improveds are worth the extra hassle of fire-forming, not to mention the added cost of custom dies. By way of background, I used to have a Rem-actioned rifle chambered in 6BR BS (Bill Shehane), which is very similar to the 6BR Dasher. I found the 6BR BS was only about 100 fps faster than a standard 6BR. For the shooting I do, that extra 100 fps is not critical. If, in the future, I feel I need more speed, I will go to a .243 AI or a 6.5-284. To be honest, I love the 6BR cartridge. Barrels last forever, and the accuracy can’t be beat. Yes a 6BR is a little light for everyday 1000-yard shooting, but on good days it can set world records. I may move up to a 6.5-284 some day, but for now I will stay with the standard 6mm BR. If I ever do want to go to a bigger caliber, the 8.5-inch BAT Machine MB action gives me this option.
Hall vs. BAT Light vs. Heavy
Comparing the two actions’ bolt lift, lock-up, fit, and finish, I feel they are equally good. However, the BAT can run stout loads with Federal 205 primers — loads that cratered Fed 205s with the Hall. I don’t know if this is a function of the actions’ engineering, or the barrels. I’ve got a Lilja on the BAT, while the Hall wears a Krieger. I do know the BAT has a tight-fitting firing pin, and that might make a difference.
Both my actions have a built-in recoil lug — a really nice feature when you are changing barrels, and one of the main reasons I favor custom actions over a Remington. I think anyone would be pleased with either the BAT or the Hall.
There is a big difference in shooting a Light Gun vs. a Heavy Gun, as you might expect. The Heavy Gun is more stable and recoils straight back. However, even at 21 pounds, the Heavy Gun actually recoils harder into your shoulder than the muzzle brake-equipped Light Gun. But if you take the Light Gun’s brake off, and put the action back in the old Hunter bench stock, the gun would jump, torque and roll. It’s much better with the 008 stock now, but still not as rock solid as the Heavy Gun. On recoil the 21-pounder just tracks straight back, no jumping, no yaw, no rolling–very impressive.
Load Development and Accuracy Results
Developed last year, my favorite Light Gun load is 30.5 grains Varget, CCI BR4 primers, and 106gr Clinch River VLDs, running 2825 fps. The Light Gun shoots other bullets very well, but the Clinch Rivers performed best, with groups in the 0.1s to the low 0.2s at 100 yds. I use Lapua brass of course.
I began my load development for the Heavy Gun with components I had from last year: Varget, N140, and N540 powders, plus Fed 205, CCI BR4, and CCI 450 primers. I also had a good selection of bullets: 95gr and 105gr Bergers, 105gr Lapua Scenars, 106gr Clinch Rivers, and 107gr Sierra MKs.
The Heavy Gun liked the Bergers right from the start. During break-in and fire-forming (with 95gr Bergers 0.20” into the lands, 30.0gr Varget and CCI 450s), the rifle shot in the low 0.2s at 100 yds, 0.3s at 200 yds, with a 0.182″ small group at 200 yards (see photo). I then moved up to the heavier bullets and again the Bergers stole the show. Best load for the Berger 105s (seated 0.15″ into the lands) was 30.5 grains Varget and Fed 205s at 2850 fps. At 100 yards, this recipe shot in the 0.1s to the low 0.2s with a small group of 0.089″. (By the way, this same load in my Hall Light Gun would crater the Fed 205 primers. I may have to change to CCI BR4 primers for the hot summer days.) After working with the 105s I wanted to see how the Heavy Gun performed with lighter bullets. I tried my favorite Egg Shoot and 600-yard load–80gr Fowlers pushed by 31.5 grains of Vihtavuori N135 with Fed 205 primers. The results were fantastic. The big BAT produced a 100-yard aggregate (five, 5-shot groups) in the 0.2s with an 0.129″ small group. Overall, at 200 yards, both guns could agg five 5-shot groups in the 0.3s and 0.4s. Eggs Beware!
Big, Strong, and Versatile ‘MB’ Action by BAT Machine
I looked at all the custom actions, and decided on a BAT model ‘MB’, configured Right Bolt, Left Port, Right Eject. The ‘MB’ action has some pretty unique features, including an integral recoil lug on the underside, and a recessed tenon (i.e. the threads start 1″ from the front of the receiver). The action is 8.5″ long, but with a 7.5″ bolt. The extra inch is added to the front. That provides extra bedding surface and room for a third pillar. The 8.5″ action length gives me the option to go up to a 6.5-284, while the dual ports should help give me the speed I need for the 10-round strings in Heavy Class. Also I can load from either side for F-Class.
Why did I choose a BAT? First, BAT quality is second to none. Moreover, BAT will custom-configure your port(s) and bolt for the same price, no added fees. Other action-makers charge extra for anything other than your basic Right Bolt, Right Port. This makes the BAT about the same price as a Stolle or Nesika, if you want a set-up like mine. The right-side ejection port is slightly smaller than the left feed port, but I can still feed 6BR cases from either side if I wish. The MB action is so big, the little BR case runs out of ejector as soon as the case leaves the chamber, so I push the case out to the right as I load the next round from the left. The BAT will eject a loaded 6BR round just fine, but a fired case only ejects sometimes. This action would work great with a longer round, such as a .243 AI or 6.5-284. If you want completely reliable 6BR ejection, you’ll need a smaller BAT action. But then, like my Hall standard action, the port would be too small for a 6.5-284.
Richard’s #008 Stock — How it Handles
The 008 stock is the best design I’ve ever shot off the bench. I like to hold my guns, and the 008’s grip profile gives me the control I like. The trigger is close enough for my short fingers. The underside of the buttstock is flat and completely straight (parallel to the barrel), so the gun tracks straight back. During recoil, the scope stays on target, making for quicker recovery time. In the picture at left, you can see that the underside of the fore-arm is relieved in the middle with raised strips on the left and right. These “rails” make for less surface area contacting the bags, less friction, and more consistent recoil. The high comb on the stock allows better prone shooting. For now, the stock is fine for what prone shooting I do. But if I do get seriously into into F-class I may want to add an adjustable comb or cheekpad. We’ll see.
Plans for Competition — The Lure of Hickory Groundhog Shoot Dollars
Some years ago, after building this pair of accurate 6mmBR rifles, Mark Schronce told us: “I can’t wait to see how this pair perform at long range. I will also take the Light Gun to the big Hickory GroundHog match in April, but I may put the barreled action back in the Hunter stock. This year you have to use bipods or sand bags, no front rest. [Editor: that is no longer the rule.] I don’t know if want to drill into my pretty new 008 stock for a bipod mount. I’ll let you know how it goes, and hopefully I’ll come back with some loot from the Shoot.” NOTE — that year Hickory offered about $8000 worth of prizes.
Erich Mietenkorte has won the 2023 Iron Man Regional Silhouette Championship for the third consecutive year — a remarkable “Three-Peat” in sihouette shooting. Scoring 280/320 points, Mietenkorte won three out of the four championships during the two-day event, and was the 4-Gun Aggregate Winner.
The 2023 Iron Man Regional Silhouette Championship was held June 3-4 and hosted by the Deep Creek Shooting Range in Missoula, MT. It brought shooters from Washington, Montana, South Dakota, Missouri, and Canada. Each morning, competitors fire 40-shot relays in both Smallbore Hunter and Smallbore Standard Rifle course of fire. Rounds are shot from the offhand position (standing) at targets 40, 60, 77 and 100 meters. In the afternoon, competitors transition to centerfire and again shoot a 40-shot relay in High Power Hunting and High Powder Standard Rifle, with targets at 200, 300, 385, and 500 meters.
“In the past I’ve been asked why I shoot silhouette and not a different discipline and the first thing that comes to mind is, when I’m at a silhouette match, I just feel at home. The people are incredible, the shooting is challenging, and it’s just plain fun! Silhouette competitors are a big part of my second family and I’m happy to be able to shoot and support a sport that brings families together to make great memories,” commented Mietenkorte.
Erich explains his aiming method: “Pick a spot on the target and shoot for that. Try not to hesitate, if you’re on target, take the shot. It’s easy to get locked up by trying to make a great shot better. Make sure to follow through, keep that trigger pulled back. Don’t forget to have fun!”
Mietenkorte trains with SK Ammunition and competes with Lapua Midas+ and X-ACT matched to his rifle at Lapua’s Rimfire Performance Center. For High Power Rifle, Mietenkorte runs a 6mmBR using Lapua cases, and Vihtavuori N140 powder behind Berger 95gr and 115gr VLD Target bullets.
“Training with SK Ammunition, specifically Rifle Match, allows me to hone my abilities. There is no other ammunition I trust going into a big match like this. Training with rimfire ammunition allows me to reinforce offhand shooting fundamentals, which really sets me up for success on the high-power range as well,” stated Mietenkorte.
Share the post "Mietenkorte 3-Peats in Iron Man Silhouette Championship"
Summer Solstice is just four days away. That means shooters nationwide will soon be dealing with peak summer ambient temperatures. When it’s hot outside your barrels will heat up even faster during use — and that’s not good for barrel longevity or consistency during long strings of fire. If you want a barrel to have maximum useful life you need to keep it from getting very hot. That’s why you should have a barrel cooler. There are many variations, but the most popular models blow cooling air through the bore. This can reduce barrel temps significantly in a relatively short period of time.
For this Saturday Movies feature, we’ve found 7 videos that review commercial barrel coolers or show how to build your own cooler with a hose, small electric fan, and modified case. There are a variety of barrel coolers on the market currently. Three of the most popular coolers are the yellow BarrelCool, $39.99 at MidwayUSA, the red Magnetospeed RifleKuhl, $56.89 on Amazon ($59.99 MSRP), and the black/yellow Chamber Chiller BA PRO, $80.40 on Amazon.
Barrel Coolers — Why You Should Use Them
This video explains why it’s vitally important to keep your barrel cool, particularly when running a suppressor. The host, a long-range shooting instructor, explains: “The best way to extend your barrel life [is using] barrel coolers. We have learned through decades of shooting that keeping the barrel cool and cooling it as fast as possible between relays and strings of fire will return meaningful results in the longevity of your rifle barrel. If you shoot suppressed like we do, this brings the level of importance up to a whole new level. Keeping it cool will keep it running at its best longer than you ever thought possible.” The barrel cooler featured in this video is $65.00 on the Wolf Precision website.
Barrel Cooler Comparison Tests — Four Options
Barrel coolers are vital accessories that let you get more shots downrange with less time waiting. In this excellent, comparison test video LongRangeOnly’s Ryan Furman shows which barrel coolers will remove the most heat with the rate of air flow comparison. Ryan also covers some basic differences and attributes of each unit tested and tests the units with temp gauges. Units tested are the BarrelCool, Magnetospeed RifleKuhl, the blue-bodied Original Barrel Cooler (6:48 time-mark), and a large Coleman rechargeable Quick-Pump (8:12 time-mark). The latter two units provided the most airflow when fitted with an appropriate hose.
Build Your Own Barrel Cooler — New and Improved
Popular YouTube host F-Class John was one of the pioneers in building very affordable, yet very effective do-it-yourself barrel coolers. John initially used a hose fitted to a battery-powered black Rechargeable Mini Air Pump. John then tapered a hose to fit a cartridge case for a perfect fit in the chamber. The case-head was cut off to better fit the hose for maximum airflow.
F-Class John later created an upgraded barrel cooling system using smaller, more compact pumps. He would charge these with a high-capacity battery pack (see above) and a USB charging cord. As shown in the video above, this Gen 2 system proved to be very effective. John notes: “Make sure you watch how long you the pump runs and don’t let it overheat”. One of these USB-port Mini Air Pumps is currently available on Amazon for $29.98, and there are similar compact pumps for a bit less.
Chamber Chiller BA Pro vs. Magnetospeed RifleKuhl
This video compares two compact barrel coolers, the red Magnetospeed RifleKuhl, $56.89 on Amazon and the yellow Chamber Chiller BA PRO, $80.40 on Amazon. Hear the tester’s conclusions starting at the 2:40 time-mark. The tester reports that both the RifleKuhl and the Chamber Chiller fit well in the chambers. The two units cooled down barrels pretty much identically in the field. Measured with a Kestrel, the RifleKuhl had a 12 mph flow vs. 11 mph flow for the Chamber Chiller (3:03 time-mark). The deciding factors for the tester (1:32 time-mark) were the superior battery life of the Chamber Chiller (with an extra USB battery attached) and the quietness of the Chamber Chiller.
Riflekühl Barrel Cooler by MagnetoSpeed
The MagnetoSpeed Riflekühl barrel cooler is designed to get barrel temperatures down to intended operating levels quickly. The turbocharger-inspired impeller is engineered to produce great airflow in a small package. Powered by a single CR123A Lithium battery (included), ambient air is forced through the extendable nozzle down the bore of the rifle. This is pretty efficient and can typically cool a barrel in under 8 minutes. The Riflekühl doubles as a chamber flag and features an exclusive built-in air filter to prevent dust and dirt from being blown into your rifle.
DIY Barrel Cooler Made with Mattress Inflator and Hose
An average gun-owner can build a good barrel cooler relatively easily with low-cost components. In this GunMart.TV video from the UK, the host showcases a very effective barrel cooler he crafted with an electric mattress inflator and a hose. The unit has good flow and can cool a barrel in a couple of minutes (3:10 time-mark). These components can be purchased for under $30.00. The tester purchased his cooler fan for $14.99 on Amazon (3:40 time-mark).
Thanks to Boyd Allen for help finding these videos.
Share the post "Saturday at the Movies — Barrel Coolers in Review"
Hornady sponsored shooter Jerry Miculek — Yamil Sued Photo.
If you are considering acquiring a revolver for fun shooting, self-defense, or competition, you should definitely watch this YouTube video. In this 23-minute presentation, legendary shooter Jerry Miculek puts three .357/.38 SPL wheelguns through their paces. Jerry, one of the greatest revolver shooters in history, hosts a “Revolver Showdown” with three popular wheelguns: 1) S&W L frame (3″ bbl); 2) Colt Python (6″ bbl); and 3) Ruger Speed Six (2.75″ bbl).
Smith & Wesson Model 686 Plus, L-Frame, 7-rd .357 Magnum/38 SPL, 3″ Barrel.
Testing at 10 Yards and 50 Yards
In the video, Jerry shoots all three revolvers rapid-fire, double-action at 10 yards. Then he shoots the three guns single-action, slow-fire at 50 yards (starting at time mark 7:19).
After his range session, Jerry examines nine medium frame revolvers, comparing and contrasting design features. Jerry considers these factors:
1. Accuracy
2. Balance and Handling
3. Speed and Sureness of Trigger Return (watch video at 3:45″ re Colt.)
4. Reliability
5. Barrel Twist Rate
6. Strength of Construction/Durability
Share the post "Wheelgun Ace Miculek Compares S&W, Colt, & Ruger Revolvers"
Talented shooter Mitchell Fitzpatrick of Applied Ballistics topped a field of over 280 competitors to win the 2023 Nightforce Extreme Long Range (ELR) Steel Challenge in Wyoming last week. The prestigious Nightforce ELR match was held June 9-11 in Glenrock, Wyoming, at the Tillard 55 Ranch. During the three-day match competitors shot 20 different stages with targets placed from 725 yards to 2125 yards. Awards were given for both individuals and teams.
Finishing third overall was Team Vihtavuori member Francis Colon who stated: “Not all challenges are created equal — in this case it was a last minute need for some extra help to run the Applied Ballistics LLC Mobile Lab at the Nightforce ELR Steel Challenge in Wyoming. Normally, I have months of advance notice to prep a rifle, barrels, and ammo for matches. However, in this case, I had less than a week and half to get a new rifle built, broken in, and begin learning to shoot a Barrett MRAD in .300 Norma Magnum[.] ”
Colon explained: “With an average target distance of 1200+ yards and 10-25 mph winds, I was definitely out of my element. But the AB solver on my Kestrel 5700 continued to help me make solid solutions at all ranges. The resulting success — finishing 3rd of more than 280 shooters — [with] my friend Mitchell Fitzpatrick (below) taking first place overall, is truly incredible and humbling.”
Colon observed: “The nerve-racking uncertainty of maintaining first round impacts on 1.5-2MOA targets at distances from 800 to 2200+ yards cannot be captured in words. It was exhilarating and gratifying. Thank you to Nightforce Optics, Barrett… and thank you to SIG SAUER for the Sig Kilo 10K with Applied Ballistics Rangefinding Binos!”
Following the match, Colon commented, “I had less than a week and half to get a new rifle, break it in, and learn to shoot the heavy-recoiling .300 Norma Magnum. I used Lapua .300 NM brass and Berger .30 Cal 215gr Hybrids powered byVihtavuori N565 to create a consistent, high-performance load and it worked exactly as expected. With an average target distance of 1200+ yards and 10-25 mph winds, it was imperative that my powder and projectile be as consistent as possible to make wind calls more successful.”
“This was my first ELR match and the first time shooting this rifle beyond 100 yards. To achieve that level of performance with those hurdles to overcome is testament to the quality of the Vihtavuori, Lapua, and Berger products working together to create an incredible system,” stated Colon, who is a top ranked Precision Rifle Series (PRS) shooter.
Share the post "Mitchell Fitzpatrick Wins Nightforce ELR Steel Challenge in WY"
The National Shooting Sports Foundation (NSSF) is challenging California’s firearm industry liability law, AB 1594, passed in 2022 and signed into law by Gov. Gavin Newsom. The law, which goes into effect on July 23, 2023, encourages civil suits against the firearm industry for the illegal actions of criminals with guns. This law is an affront to the U.S. Constitution and is an attempt to circumvent the will of the U.S. Congress when it passed the Protection of Lawful Commerce in Arms Act (PLCAA).
The litigation, NSSF v. Bonta, was filed in the U.S. District Court for the Southern District of California. The NSSF now seeks a preliminary injunction to halt enforcement of AB 1594 as challenges to the unconstitutional law progress through the courts.
NSSF Files Motion to Enjoin Unconstitutional California Firearm Industry Liability Law
The NSSF filed a motion for a preliminary injunction in its legal challenge, NSSF v. Bonta, seeking to enjoin California’s firearm industry liability law, AB 1594. The unconstitutional law permits and encourages civil suits against members of the firearm industry for the damages/injuries caused by the actions of criminals. The law goes into effect next month on 7/23/23.
NSSF’s motion argues that California’s firearm industry liability law is preempted by the Federal Protection of Lawful Commerce in Arms Act (PLCAA) which was passed with bipartisan support in Congress and subsequently signed into law by President George W. Bush in 2005. The PLCAA was specifically enacted to stamp out frivolous lawsuits sought by activist politicians, gun control lawyers and greedy trial lawyers seeking to bankrupt the lawful firearm industry by blaming them and their lawfully-sold and non-defective products for the violence and harm caused by criminals who misuse firearms to commit their crimes.
“It’s no surprise California’s rabidly antigun General Assembly would pass and Governor Gavin Newsom would sign into law a blatantly unconstitutional attack on the lawful firearm industry instead of looking in the mirror to see how their own policies are leading to historic levels of criminal violence and endangering law-abiding and innocent Californians every day,” said NSSF Senior Vice President and General Counsel Lawrence G. Keane. “NSSF will not stand by and allow the Second Amendment rights of law-abiding Americans … to be trampled upon while criminals committing acts of violence are handled with kid gloves by soft-on-crime prosecutors. California’s industry liability law is in blatant defiance of the U.S. Supreme Court’s decision in Bruen and is preempted by the PLCAA.”
In addition to the firearm industry liability provision, California’s AB 1594 bans the manufacture, sale, and marketing of firearms the state deems “abnormally dangerous” regardless of if they are commonly-owned. It allows civil lawsuits against a firearm industry member to be filed by a person who has suffered harm in California, the Attorney General, or even city or county attorneys for the harm caused by the criminal misuse of a firearm by a remote third party. The law unconstitutionally invades the sovereignty of sister states by directly regulating lawful commerce occurring entirely and wholly outside the state of California in violation of the Commerce Clause and the United States system of federalism.
NSSF’s challenge explains that AB 1594 is a law that was drafted prior to the Bruen decision and signed just weeks AFTER the Supreme Court published the landmark ruling. Rather than re-examining the legislation to ensure AB 1594 complied with Supreme Court precedent, California legislators ignored the Supreme Court’s decision and pushed AB 1594 through defiantly.
The NSSF argues that AB 1594 not only infringes on Second Amendment rights but chills First Amendment rights by restricting advertising of Constitutionally-protected products that are lawfully made and sold — even when that advertising takes place outside of California’s borders.
Share the post "NSSF Seeks Injunction Against Radical California AB 1594 Law"
A new Vortex video series, Cartridge Talks Comparisons, looks at multiple variables along with ballistics gel tests to determine the comparative performance of popular cartridge types. Each Month, Cartridge Talks will examine and test two popular cartridges, comparing their head to head performance. In Episode 1, Vortex Nation™ hosts Mark Boardman and Ryan Muckenhirn pit the 6.5 Creedmoor and .308 Winchester cartridges against each other, examining projectile performance. Mark and Ryan then make conclusions about the applications best suited to each cartridge type.
Cartridge Comparison 14-minute video, Highlighting Ballistic Gel Testing
This first Cartridge Talks Episode pits the 6.5 Creedmoor against the .308 Winchester in a head-to-head, ballistics gel-induced bullet battle. Ballistics (drop/drift), penetration ability, terminal performance and other variables are tested with a variety of tools and tests. Viewers are invited to check out Episode 1, and suggest future cartridge battles in the comments section.
Here is the full 67-minute 6.5 Creedmoor vs. .308 Win Cartridge comparison video:
“With the myriad of cartridges available to the big game hunter, picking which chambering is best for you and your application can be a daunting task,” says Muckenhirn. “In Cartridges Talks, we put our biases on the shelf and put as much scientific process to this as possible. From ‘shootability’ and accessibility, to terminal performance as observed in ballistics gel, Cartridge Talks wades through the numbers and figures with you, loads you up with the pertinent information, and helps you select the ideal cartridge for your next hunt!”
Upcoming Cartridge Talks Shows include:
2023 July, Episode 2 — .308 Winchester vs. .30-06 Springfield
2023 August, Episode 3 — .270 Winchester vs. .30-06 Springfield
2023 September, Episode 4 — .308 Winchester vs. .300 Winchester Magnum
Share the post "6.5 Creedmoor versus .308 Win — Cartridge Comparison Testing"
In recognition of June as National Safety Month, the NSSF reminds guns owners that their most important responsibility is to store their firearms securely when not in use. New and long-time gun owners sometimes underestimate the danger of leaving firearms unsecured, which can potentially lead to such risks as: A child getting into a bedside table or closet and finding a loaded gun; A criminal stealing an unsecured firearm from one’s home or vehicle; or a teen at risk for suicide obtaining an adult’s firearm.
With schools closing soon for the summer and kids spending more time at home, firearms safety is more important than ever. Given that fact, the NSSF reminds gun owners to keep their guns locked up so they cannot be accessed by children. The NSSF urges gun owners to keep firearms safety a top priority. All gun owners must remember that it is vital to use gun locks and secure storage at all times.
We also know that stolen firearms contribute to violent crime in the U.S. Gun thefts from cars, in particular, are a persistent source of stolen guns. This means that gun owners—if they fail to secure their firearms in their vehicles—could have their gun stolen and potentially used in a crime—and no one wants their gun used by a criminal.
That’s why it’s so important, as a responsible gun owner, to make sure you’re practicing secure firearm storage and to encourage fellow gun owners to do the same. You have many choices of safety devices to fit your needs and lifestyle — from free Project ChildSafe® cable gun locks available at local law enforcement agencies to lockable gun cases, lock boxes, and full-size safes.
Firearms Security and Safety in Vehicles
“More parents are assuming the role of educators in their homes, so it’s a good to time have a talk with your kids about gun safety, even if you don’t own a gun”, states Joe Bartozzi, NSSF President and CEO. “If you do own a firearm, be sure your family understands the safety rules regarding firearms in your home, and always store guns responsibly when not in use.”
Rimfire Varmint Adventure
Can you shoot prairie dogs with a .22 LR Rifle? The answer is yes, if you have an accurate rifle, know your drops, and keep your targets within a reasonable distance (inside 240 yards). While the .17 HMR and .17 WSM are much more potent, flat-shooting, and effective P-dog slayers, a talented marksman CAN get good results with a .22 LR rimfire rifle, as ace PRS shooter and gunsmith Jim See recently proved.
Posting on his Facebook Page on 7/9/2020, Jim wrote: “Took out the .22 LR for some LR prairie poodles, there were not many in this town, but it gave me a chance to get some impressive hits. Norma TAC-22 ammo put the smack down on a first-round hit, called head shots at 189 yards. The body-shot dog was a first-round kill at 240 yards. I had one more head shot with a second round hit at 163. The nice part about using the .22 Long Rifle ammo is the [critters] don’t spook too bad, so a follow-up shot with a correction is usually available to get a better wind hold.” Even unsuppressed, a .22 LR rimfire shot makes much less noise than a centerfire round.
NOTE: The Norma TAC-22 .22 LR ammo used by Jim See offers great bang for the buck. It is quite affordable — a 50rd box is just $4.99 at MidwayUSA. Some lots have show outstanding accuracy. These target photos (below) come from Champion Shooters Supply which may have gotten an exceptional lot. This vendor tells us: “We have found this to run very well in Ruger rifles, handguns, and target pistols. These are 5-shot groups at 50 yards with an Anschutz 1913 rifle. This is an incredible value.” Jim says the TAC-22 ammo delivers 1″ groups at 100 yards in his rifle.
Sierra Bullets has introduced a new line of loaded centerfire varmint ammunition, the Prairie Enemy series of cartridges. Sierra currently offers Prairie Enemy ammo for six cartridge types: .204 Ruger, .223 Rem, .224 Valkyrie, .22-250 Rem, .243 Win, and 6.5 Creedmoor. To celebrate this new ammo line, Sierra created a colorful Prairie Enemy P-Dog target. Click the image below to download the PDF target.
Much of the Northeast USA recently suffered from smoke drifting south from massive forest fires in Canada. This underscores the importance of helping to prevent wildfires. There were 68,988 wildfires in 2022 that burned more than 7.5 million acres of land throughout the country, according to the National Interagency Fire Center. These conflagrations — an increase from 2021 of over 10,000 more wildfires — caused billions of dollars in damage plus hardship for both people and wildlife.
NSSF reminds target shooters and hunters to take precautions so they don’t accidently ignite a wildfire. Some 90 percent of wildland fires in the United States are caused by human actions.
KEY PRECAUTIONS:
1. Be aware of any/all restrictions on shooting and other activities in fire-prone areas.
2. Do NOT use tracer rounds, exploding targets or ammunition that is steel-jacketed or contains steel-core components.
3. Be aware that a car, truck, or ATV’s hot exhaust system can ignite dry vegetation — so stay on roads whenever possible. Park only in designated areas and don’t leave the motor running in wilderness areas.
4. Make sure all campfires and smoking materials are properly extinguished.
NSSF’s Help Prevent Wildfires public service campaign helps remind recreational shooters and outdoor enthusiasts to be mindful of their surroundings and to follow the key precautions outlined above. Wildfires are tragic in many ways. Remember that most wildfires can be prevented if people pay attention to their surroundings and follow safe practices.
Share the post "Be Careful This Summer — Help Prevent Wildfires"
Shooting USA TV has a very good show released today. Shooting USA’s Wednesday Night episode features an interesting tactical-style airgun competition, and then there’s a sequence from Julie Golob on how to use video recordings to improve your pistol handling and marksmanship. For fans of military firearms, this week’s episode also features a notable WWII German rifle — the Gewehr 43.
Shooting USA SHOW TIMES: This Shooting USA Episode airs Wednesday, June 14, 2023 at 9:00 PM Eastern and Pacific; 8:00 PM Central. If you miss the regular broadcast, you can stream the show online at any time on Vimeo for $0.99 per episode.
The Rocky Mountain Airgun Challenge
The 2022 Rocky Mountain Airgun Challenge in Provo, Utah attracted top shooters with over $100,000 worth of prizes. The stages look like what you’d see at PRS/NRL events, but the targets are smaller, the range is shorter, and the power behind each shot is air. Practical Air-Gun competition has a well-established community that spans the globe, and recently competitors from other shooting disciplines, the powder burners, beginning to take notice. Air-Gun practical competition is fun and inexpensive — you are paying pennies a round vs. a $1.25 or more for premium centerfire ammo. The Rocky Mountain Airgun Challenge is leading the way in this interesting air-powered shooting discipline. This multi-day event featured a variety of events on multiple stages.
Germany’s Answer to the M1 Garand — the Gewehr 43
The Gewehr 43 is featured this week on Shooting USA. This semi-auto battle rifle was developed in response to the legendary M1 Garand — the US standard issue rifle in WWII. The effectiveness of the self-loading Garand was not lost on the German military, armed with bolt-action Mausers that dated back to the first world war. For Nazi Germany the pressure was on to develop a semi-automatic battle rifle that could match the repeating firepower of the M1. The result was the Gewehr 43.
Using Video to Improve Your Shooting — S&W Pro Tip
The talented Julie Golob has another Smith & Wesson Pro Tip on using video to improve your shooting. Julie states: “Did you know that one of the best tools for self-diagnosing technique is your smart phone? You can set up your smartphone to record your shooting and coach yourself through valuable skills. In this Pro Tip I am going to walk you through three different ways to use your [smartphone’s video camera] to become a better shot. READ FULL STORY with More TIPs and 14 Photos.
Share the post "Rocky Mountain Airgun Challenge on ShootingUSA TV"
AIM SMALL, MISS SMALL: At 25 yards, this is a fun rimfire plinking target. At longer distances it can be a great training target for precision centerfire shooters.
NRL22 and PRS rimfire competition is hugely popular. And we’re seeing great interest in .22 LR rimfire tactical cross-training. With a rimfire rig, you can practice regularly for a fraction of the cost of centerfire shooting. That way you can build your skill set without breaking the bank. Decent rimfire ammo can be had for 10 to 20 cents a round. Compare that to $1.00 (or more) for centerfire handloads and as much as $2.00 per round for factory ammo such as Hornady 6.5 Creedmoor.
To help with rimfire cross-training, here are some of our favorite rimfire tactical targets, all in easy-to-print PDF format. Click each target image to download the FREE target. You’ll find more free targets for load development, precision practice, and fun shooting on our AccurateShooter FREE Targets Page.
Modern Rimfire Tactical Rifle with MPA BA Comp Chassis and Vudoo V-22 action.
Targets for Rimfire Training and Fun Matches
Here’s a rimfire training target with “big to small” target circles. Start with the largest circles, then move to the smaller ones in sequence. This systematic drill provides increasing challenge shot-by-shot. Novices often are quite surprised to see their accuracy improve as they move from bigger to smaller aiming points. That provides positive feedback — always a good thing.
Right Click and “Save as” to download printable PDF versions of target.
This Vortex Nation video features an 80-minute interview with Travis Ishida, one of the original founders of the NRL22 and NRL22-X disciplines. Travis told us that the NRL now runs 7-8 times as many rimfire matches as centerfire matches.
Rimfire Practice Targets
SPECIAL BONUS–Rimfire Tactical Precision Targets
These FREE targets by DesertFrog are offered in Adobe Acrobat format for easy printing. CLICK HERE to download all six targets as a .ZIP archive.
From Popping Paper to Slamming Steel…
After you’ve trained with these printable paper targets you might want to switch to steel. Shooting steel reactive targets is fun as you get instant gratification when you hear the clang and see the steel plate move. This video reviews a NRL22 steel target kit produced by JC Steel targets from strong AR500 steel.
Share the post "FREE Targets for NRL22 and Tactical Rimfire Cross-Training"
Hall vs. BAT
Load Development and Accuracy Results
Big, Strong, and Versatile 
Testing at 10 Yards and 50 Yards
In recognition of June as National Safety Month, the NSSF reminds guns owners that their most important responsibility is to store their firearms securely when not in use. New and long-time gun owners sometimes underestimate the danger of leaving firearms unsecured, which can potentially lead to such risks as: A child getting into a bedside table or closet and finding a loaded gun; A criminal stealing an unsecured firearm from one’s home or vehicle; or a teen at risk for suicide obtaining an adult’s firearm.
Rimfire Varmint Adventure
