Do you have trouble seeing your bullet holes (on paper) when shooting past 400 yards? That’s a common issue even with premium ($2000+) high-magnification scopes. Here’s a target that solves that problem. A hit creates a larger black circle that’s much more visible than a plain bullet hole, making this target ideal for use at longer range (500 yards and beyond).
The 12″ square Birchwood Casey white background Sight-In Target displays a black “halo” around each hit (like the yellow circle on a conventional Shoot-N-C). Larger than bullet diameter, the “halos” can be easily seen with a high-magnification scope at long range (see video below). The self-adhesive target features four diamonds with contrasting red box centers. For precise aiming, you can position your cross-hairs to align with the corners of the boxes. Or, you can put a target dot sticker in the middle.
This video shows Black Shot Halos on white background:
While we envision using this target with optics at long range, Birchwood Casey says that open sights show up well against the white background, making these targets well-suited for indoor ranges or use in low light conditions.
This white background grid target has five aiming points and a 1-inch grid overlay for quick and easy sight adjustments. It comes with target pasters that allow shooters to cover up bullet holes and continue using the target for added value. The White/Black Shoot-N-C 12″ Sight-In Targets come in 5-packs with 75 target pasters for $8.99 from MidwayUSA or $8.09 on Amazon. If you prefer circle targets, there is a larger 17.5″ Shoot-N-C target with one large bull with red diamond center (photo right).
High-Viz Option — Yellow on Black Grid with Yellow Halos
If you prefer seeing ultra-high-contrast yellow/green “halos” for your hits, Birchwood Casey also makes adhesive grid targets with five yellow-edged diamonds. Red circles provide precise aiming points in the middle of each box. You can quickly estimate group size or dial-in your zero using the hi-viz yellow 1″ grid lines. These yellow-on-black targets are available in three sizes: 8″ square, 12″ square, and 17.25″ square. These yellow-on-black grid targets start at $4.99 for an 8″ six-pack.
Share the post "See Shots at 500+ Yards with White Background Splatter Targets"
At the request of our readers, we provide select “Deals of the Week”. Every Sunday afternoon or Monday morning we offer our Best Bargain selections. Here are some of the best deals on firearms, hardware, reloading components, optics, and shooting accessories. Be aware that sale prices are subject to change, and once clearance inventory is sold, it’s gone for good. You snooze you lose.
NOTE: All listed products are for sale to persons 18 years of age or older. No products are intended for use by minors.
1. Sportsman’s WH — Savage Axis w/ Scope Combo, $399.99
⏺ Great price on hunting rifle with scope
Need an affordable scoped rifle for a fall hunt? Check out the Savage Axis w/ Bushnell Combo. For just $399.99, you get the Savage Axis XP Rifle with mounted Bushnell 4-12x40mm scope. Chose from a variety of popular chamberings including: .223 Rem, .243 Rem, 6.5 Creedmoor, ,270 Win, .308 Win, 350 Legend, and .30-06 Springfield. Most feature a 22″ barrel, but some come with 18″ or 20″ barrels. The AXIS XP features a tough synthetic stock and detachable box magazine.
2. Amazon — Kestrel 1000 Wind Meter, $79.00
⏺ Excellent basic Kestrel at a great price
Sometimes all you want to know is the windspeed so you don’t need other fancy wind meter features. The Kestrel 1000 is a great no-frills wind meter. This unit measures and displays maximum, current and average wind speed in m/s, ft/min, km/h, mph, and knots on a large, clear LCD screen. Priced at just $79.00 on Amazon, this rugged unit floats, is waterproof (IP-67), and is drop-tested to military standards (MIL-STD-810G).
3. Precision Reloading — Ammo Sale Up To 37% Off
⏺ Major savings on big-name hunting and match ammo
If you need quality ammunition for that fall hunt, check out the October Ammo Sale at Precision Reloading. You’ll find a large range of cartridge types from Federal Hornady, Berger, Winchester and more with discounts up to 37%. This is a great opportunity to get quality ammo for that deer or varmint rifle. Precision Reloading also has Fall Hunter discount codes: CODE 1623 for $10 off $100 and CODE 2623 for $25 off $250.
4. Midway USA — Vortex Viper PST 5-25x50mm, $659.99
⏺ Save $440 on good scope for PRS/NRL matches and varminting
Looking for first focal plane (FFP) scope for PRS/NRL competition? Here’s a great deal on the Vortex Viper PST 5-25x50mm FFP scope. The sale price is just $659.99, marked down from $1099.99. That’s a whopping $440 savings — a full 40% off. This Viper PST scope features zero stop and illuminated reticle. The 5-25X magnification range is just about ideal for PRS/NRL competition. Vortex offers one of the best scope warranties around, so buy with confidence.
⏺ Very affordable option for a good, basic Black Rifle
AR15-platform rifles are great for self-defense, varminting, and service rifle competition. This week Palmetto State Armory, a leading AR vendor, is offering complete finished PSA PA-15 rifles for just $469.99. You could pay that much for an upper alone. Listed as “Blem” models, with slight finish imperfections, these PA-15 rifles are durable and function well. The forged 7075-T6 aluminum lower mounts an 6-position adjustable buttstock. The hard-coat anodized upper features a full-length upper rail and lightweight M-Lok free float handguard. The barrel is 1:7″ twist.
6. EuroOptic — U.S. Optics Scope Sale
⏺ Very high-quality scopes with huge savings
U.S. Optics makes some great optics but they usually come with a hefty price tag. But right now EuroOptic is running a sale U.S. Optics TS Scopes with some incredibly low prices. Select among three power ranges: 1-8X, 3-12X, and 5-25X. If you’re putting together a PRS/NRL competition rig we recommend the U.S. Optics TS 5-25x50mm FFP scope. The sale price is just $499.00, HALF the regular $995.00 price.
7. Amazon — ShootingTargets7 AR500 Steel Targets
⏺ Good selection of AR500 steel targets with durable zinc coating
Steel targets are great for fun shooting and tactical training. Right now Amazon offers a line of USA-made Zinc-plated, laser-cut AR500 Steel Targets starting at just $7.97 (for 3″ diameter gong). Choose from a variety of sizes ranging from 3″ to 16″ diameter and thicknesses 1/4″, 3/8″, or 1/2″. There’s also a 12″x23″ torso target. The Zinc plating on the steel prevents rust. The maker says the zinc “is far more durable than paint or powder coat.”
⏺ Popular hunter’s target with grid and deer image
Before you head out hunting, you should sight-in your rifle and do some practice. A good target option is the Pro-Shot Products 25″ x 25″ Whitetail Deer Sight-in Target. Priced at just $9.19 for a 5-pack, this is a good sight-in target with a grid background and four prominent sighting diamonds. This target shows key animal vitals and the deer image is very realistic — providing good preparation for your hunt.
9. Amazon — Lyman Universal Case Prep Set, $63.95
⏺ Handy kit with 8 useful tools with molded handles
Proper brass prep includes deburring, chamfering, cleaning primer pockets and more. The Lyman Universal Case Prep Tool Kit has all the key prep tools you’ll need. This kit includes both large and small primer pocket reamers, primer pocket cleaners, outside deburring tool, inside (VLD) chamfer tool and large and small primer pocket uniformer tools. All individual items have their own molded handle with rubber insert for sure grip. The kit includes a nice, zippered case for storage and/or transport. For $64.88 you can get all the same tools in a rugged Lyman Hard Case Prep Tool Kit.
10. Amazon — Hornady One Shot Lube, $22.99
⏺ Very effective case lube, popular with our Forum members
Sizing brass can be a chore without the right lube. One of our favorites is Hornady One Shot. This lube spreads evenly and works well with sizing dies. Many top shooters use this lube both with single stage and progressive presses.
Share the post "BargainFinder 420: AccurateShooter’s Deals of the Week"
Howa claims that its new Super Lite rifle is the “absolute lightest centerfire rifle on the market”. We can’t confirm that. But at a listed 4 pounds, 7 ounces (without optics), the carbon-fiber stock Super Lite model is certainly very low in weight and mass. That’s an important plus for hunters carrying their gear for long hours in the field.
The Howa Super Lite rifle is currently available at many stores in 6.5 Creedmoor and .308 Winchester, two of the most popular hunting chamberings. And Brownells has the Super Lite in stock in .243 Win, 6.5 Creedmoor, 7mm-08, and .308 Win, starting at $614.99.
The Howa Super Lite rifles were first introduced in Kryptek Altitude and Kryptek Obskura designs (see Kypteck Altitude camo in photo above). For 2023 the Howa Super Lite is offered in three new solid color designs — gray, tan, and green. All using the strong but light Stocky’s Carbon Fiber stock, these new Super Lite models feature a black webbing and soft touch for added texture and enhanced grip on the low-mass carbon stock. For 2023, Howa will also offer a walnut-stocked version of the Super Lite rifle. This weighs a bit more — 5 pounds, 9 ounces.
Howa Super Lite Rifle Features
Stock Options: Gray, Tan, Green, and Krypteck Carbon Fiber Stock 4 lbs. 7 oz. (Walnut Stock, 5 lbs. 9 oz.)
Chamberings: 6.5 Creedmoor, .308 Win (.243 Win and 7mm-08 in June 2023)
Stock: Stocky’s Carbon Fiber Stock with Accublock patented Lug Bed
Barrel: 20″ Blued barrel threaded (½”-28) and Suppressor Ready
Trigger: 2-Stage Match Trigger with 3-position Safety
Optics Mounting: Included one-piece Picatinny Rail
Stock Feature: Limbsaver Butt Pad
Warranty: Lifetime Howa Warranty
Accuracy Claim: Sub-MOA 3-shot group at 100 yards with premium factory ammo
The Howa Super Lite also has some interesting mechanical features, including machined receiver and gorged bolt, tool-less firing pin removal, and a reliable M-16 style extractor/ejector. CLICK HERE more information on HOWA Super Lite rifles and the rest of the Legacy Sport Int’ls full product line.
Share the post "For Hunting Season — Super-Lite Howa Rifles Under 5 Pounds"
The CMP Western Games “Fall Classic” event — featuring CMP Highpower Rifle and CMP Pistol Matches — takes place next week, October 10-15, 2023 at the Ben Avery Shooting Facility near Phoenix, Arizona. This year, the CMP decided to move the Western CMP Games back to its original October timeslot. Although the CMP’s most recent Western Games were held in March of 2023, there will also be a fall Western Games this year, as was the tradition in past years.
The decision to move Western Games back to October was reached after the CMP conducted a survey of competitors. Though the results (155 submissions) indicated spring was favorable (65%) versus fall (34%), the final decision was based on cost to host the event. Spring training for baseball causes inflated expenses for hotels, rental cars, and flights in the earlier months of the year. An October event allows more affordable travel/accommodations for Western Games participants. That should allow more competitors to enjoy the events at Ben Avery.
The 2023 October Western Games will have a condensed schedule of events:
Garand, Springfield, Vintage & Modern Military Matches
Carbine Match
Rimfire Sporter Match
Mid-Range 3X600
80 Shot Rifle
2-Man Rifle Team
EIC Service Rifle
CMP Match Pistol 2700
EIC Service Pistol
.22 Rimfire Pistol
EIC Service Revolver
Military & Police Service Pistol
and 1911 As-Issued Pistol Match
The Western CMP Games will feature three days of Garand/Springfield/Vintage & Modern Military Matches, a Carbine Match, a Rimfire Sporter Match, a Vintage Sniper Match, and a Rifle Basic Class. The CMP Highpower Rifle Matches include the CMP Team HP Clinic with Live Fire, a 4-Man Team Match, three days of CMP 800 Aggregate Matches and a CMP Service Rifle EIC Match. The Highpower Rifle portion of the Western Fall Classic will include a 2-Man Team Match, two days of CMP 800 Aggregate Matches, a CMP Service Rifle EIC Match and a Mid-Range 3×600 event. For educational purposes, a Rifle & Pistol Marksmanship 101 Classes with introductory EIC Matches are also part of the October lineup. There will also be a GSM New Shooter Clinic, a Highpower Rifle Clinic, and an M1 Maintenance Clinic.
Handgun shooters can compete in 4 days of Pistol Matches including CMP Match Pistol 2700, CMP .22 Rimfire Pistol EIC Match, CMP EIC Service Pistol Match, CMP 1911 As-Issued Pistol Match, Military & Police Service Pistol Match and the NEW CMP Service Revolver EIC Match.
M1 Garand
Line-up of M1 Garands at the CMP Sales tent.
This CMP Video Explains the Process for Ordering an M1 Garand from the CMP:
M1 Carbine
CMP M1 Carbine Matches — Growing in Popularity
The CMP M1 Carbine Match is part of the CMP Games program that already includes Garand, Springfield and Vintage Military Rifle Matches. “As-issued” U. S. Military M1 Carbines are fired over a 45-shot course of fire at 100 yards on either the old military “A” target or the “SR” target. The course includes 5 sighters and 10 shots for record prone slow fire in 15 minutes, a 10-shot rapid fire prone series in 60 seconds, a 10-shot rapid fire sitting series in 60 seconds and 10 shots slow fire standing in 10 minutes.
Modern Service Rifle (AR15 Family)
Vintage Sniper Match Rifles
All competitors firing on the Highpower range will be firing on Kongsberg Electronic Targets (KTS) (see above center). The KTS system registers each shot and relays the location and score value to a monitor beside each shooter.
A good riflescope is essential for many types of competition, and the vast majority of hunters have scoped rifles. Some F-Class and benchrest competitors are now using optics with up to 60X magnification. Over the past 30 years, scopes have continued to evolve with improved glass, more reticle types, vastly increased elevation travel, bigger main tubes, FFP and SFP options, and even built-in electronics.
When shopping for a riflescope, it’s useful to understand how scopes work — how the internal mechanisms control windage and elevation, how parallax controls work, and how magnification levels are controlled.
Basics of How Riflescopes Work
This Burris video (above) covers the key aspects of scope function: zoom magnification, windage control, elevation control, parallax control (front or side mount), and ocular lens focus. There are some tips on getting a new scope running smoothly — it’s wise to rotate the power control a few times as well as both windage and elevation knobs. The video below also explains how to set ocular focus controls optimally.
Scope Break-In Methods and Diagnosing Issues — Great Video
We recommend that all serious shooters watch this video start to finish. A very knowledgeable scope engineer, Leupold’s Mike Baccellieri, explains the fine details of scope operation — with very useful recommendations on how to ready a new scope for use (See 36:50 time-mark). With a new optic he advises to run the controls multiple times to full travel. Also, take your time to get the diopter control just right (See 26:40 time-mark).
The video also explains why, with a new scope or one that hasn’t been used much, it is sometimes effective to rotate the elevation PAST the desired setting then come back a click (See 35:40 time-mark). In addition, near the end of the video, the expert explains how you can use a mirror to determine if the scope mount (base and/or rings) is NOT aligned with the bore axis, forcing excess travel to get on target (See 42:00 time-mark). We have seen this caused by scope rails attached slightly off axis.
Large diameter turrets make windage and elevation markings easier to see, and the click “feel” may be more noticeable given the greater diametrical travel between clicks.
First Focal Plane (FFP) vs. Second Focal Plane (SFP)
The main visual difference between First Focal Plane (FFP) and Second Focal Plane (SFP) scopes is the appearance of the reticle (and its hash marks) at different magnification levels. With a FFP scope, the reticle increases in visible size (and line thickness) with increased magnification. This is so the angular hash marks remain constant (in Mils or MOA angular span) at all magnification levels. So, on a 10-30X FFP scope, a 0.1 Mil hash mark represents the SAME angular measurement at 10X, 20X, or 30X (or any magnification). The downside of the FFP system is that the reticle lines can appear very thick at high magnification. But for a PRS/NRL match, with targets at multiple distances, it is important that the hash marks represent the same angular measurement at all power settings.
On a Second Focal Plane (SFP) scope, by contrast, the reticle lines (and hash marks) appear visually (in thickness) the same at all magnification levels. This means the hash mark divisions will only be precise at one magnification level, as designed by the manufacturer. For example, you could have exact 1 MOA Hash marks at 10X. But zoom the scope to 20X and the same reticle hash mark would then cover 2 MOA. SFP scopes are popular with competition shooters who shoot at specific known distances. Not having thick reticle lines at 25X to 50X is an advantage when aiming at precise benchrest and F-Class targets.
ZEISS now makes excellent FFP Scopes with both MOA and Milrad options
Minute of Angle (MOA) vs. Milliradian (MILRAD or MIL)
This video also explains MOA vs. MRAD (Milliradian) controls. A Minute of Angle (MOA) is an angular measurement that represents 1.047″ at 100 yards. Modern MOA scopes are typically configured with 1/4 MOA or 1/8 MOA clicks. A Milliradian (MRAD) is another angular measurement defined as one-thousandth of a radian. Milrad scopes are commonly configured with 0.1 Milrad clicks. How much is a 0.1 mil at 100 yards? One mil equals 3.6 inches at 100 yards; therefore, 1/10th of that, 0.1 Mil, equals 0.36” – roughly a third of an inch – at 100 yards. That’s pretty close to the common quarter-inch (1/4 MOA) increment found on MOA riflescopes.
Sightron makes excellent high-magnification SFP zoom scopes favored by many competitors. These have proven quite reliable and offer very good performance for the price.
Scope Mounting Method and Alignment
When mounting a scope, you want to make sure the scope is aligned properly, so that vertical travel is precisely up and down, not offset. Begin by supporting the rifle with a good front and rear rest. Use a portable level to ensure the rifle is not tilting slightly left or right around the barrel bore axis. Then you want to align your scope’s vertical axis. For this, we recommend setting up a plumb bob — a weighted line that hangs straight down. This can be set up indoors or outdoors. Align your reticle’s vertical axis precisely with the plumb bob line, making sure not to move the rifle.
One caution — we have seen some riflescopes that are internally off-axis by up to 4 degrees. In this case, you can align the reticle’s vertical axis with the plumb bob line but then find that your turrets are slightly titled. That is a scope manufacturing fault that will result in some error when you input a large click value (e.g. 10+ MOA up or down).
When mounting your scope, another key factor to consider is the eye relief — the distance of the rear “ocular” lens to your eye. When mounting the scope, put your head in the position at which you normally shoot. NOTE: As your optimal head position may be quite a bit different when shooting prone vs. shooting from a bench, you may want to adjust the scope placement for different shooting positions. This Editor had to move his comp rifle scope about an inch rearward when local club matches changed from prone to bench.
Video collection suggested by Boyd Allen
Share the post "Saturday at the Movies: How Riflescopes Work"
This article originally appeared in the Sierra Bullets Blog.
Sierra Bullets asked a few hand-loaders to reveal their favorite reloading tool or accessory: “What is your favorite ‘don’t know how you ever lived without it’ piece of reloading equipment?” Some of the answers are listed below. We were interested to see some high-tech, micro-processor items mentioned, such as the AMP Annealer, and the AutoTrickler powder dispenser. Old standbys, such as the rugged RCBS Rockchucker and Dillon 650, also made the favorites list.
What Is Your Favorite Piece of Reloading Equipment?
Bill, Editor of Rifleshooter.com, answered: “I have so many favorite reloading tools, it’s hard to pick one. But if I had to, it would be my Forster Co-Ax press. I like the ease [with which] you can change dies and that it doesn’t require traditional shell holders. It’s a great tool to have!”
Sierra Bullets Ballistic Technician Philip Mahin answered: “A comparator gauge to measure from the base of a case to the ogive of the bullet. This bypasses the tip of the bullet, so I can repeat the same seating depth the next time I visit a specific combination.”
Ballistic Technician Carroll Pilant answered: “Dillon 550 and 650 presses.”
Ballistic Technician Rich Machholz answered: “My universal decapping die is as handy as a pocket on a shirt.”
Ballistic Technician Philip Mahin answered: “A comparator gauge to measure from the base of a case to the ogive of the bullet. This bypasses the tip of the bullet, so I can repeat the same seating depth the next time I visit a specific combination.”
Jon Addis answered: “Putting an A&D FX-120i scale with AutoTrickler and Auto-Throw on the bench has changed the way I reload. It’s kernel accurate in about 15 seconds. Saves time and reduces a variable. And of course, the system is made better by the Area 419 Billet Adjustable base for the trickler and Billet Powder Cup.”
This video shows the AutoTrickler V3 System
Ballistic Technician Paul Box answered: “The Lee hand priming tool.”
Former Ballistic Technician Robert Treece answered “My homemade dental pick. I use it to check incipient case-head separations. We all see the ‘bright ring’ down close to the case head, that’s natural, but after several firings could be starting to split apart. If the pick hooks into a crevice — DON’T TRY TO SIZE THE CASE. It will pull apart in your die.”
Dan Blake answered: “My Annealing Made Perfect (AMP) annealer. With consistent neck tension being one of the largest contributions to small Extreme Spread on muzzle velocities, I believe this induction annealer is truly the best on the market.”
This manufacturer-produced video shows how the AMP annealing machine operates:
Process Engineer David Palm answered: “Homemade case lube.”
Plant Engineer Darren Leskiw answered: “Beyond the normal equipment, I’d say my electronic scale. Using the beam balance for the past 9 years was ok, but nowhere as easy as using an electronic scale.”
There were many votes for the classic RCBS Rock Chucker single-stage press:
Ballistician Gary Prisendorf answered “RCBS Rockchucker Press, it’s built like a tank, and it will last me a lifetime.”
Production Manager Chris Hatfield answered: “RCBS single stage reloading press.”
Maintenance & Machine Shop Lead Craig Westermier answered: “RCBS Rock Chucker.”
Production Resource Manager Dan Mahnken answered “RCBS Rock Chucker! Buy one and it lasts a lifetime.”
Sierra Bullets Ballistic Technician Duane Siercks answered: “I don’t know that you would actually call this equipment, but the item that comes to mind would be my reloading room/shoot house. I had always had to squeeze everything into a corner or even an unheated shed. After we bought our current house, I built a garage and placed it so that I had a window looking down a 250-yard range. I built a dedicated room with heat and A/C. It contains my reloading bench and a shooting bench. The shooting bench lets me slide open the window and shoot down the range. It is very handy to not have to load everything up to go to the range. It also makes load development a lot simpler and efficient. I don’t know how I ever got along without it.
I also wonder what I did before I acquired the Lyman 1200 DPS Powder Dispenser. This has made the process so much simpler and much easier. I also have a Lee Precison Universal Decapping Die that I would gladly spend the money on again. This may be a small thing, but it certainly is handy. The Lee would accommodate some very large cases that some of the others were too small for.”
Share the post "What Is Your #1 Favorite Reloading Tool or Accessory?"
Close-up of the Tri-Way Trimmer with clear plastic chip guard removed.
Giraud Tool offers a case trimmer/chamferer device that works with a power drill (or other power source). Giraud’s patented Tri-Way Trimmer is a self-contained unit powered by your drill or motor. Using a sharp carbide blade it will trim your cases to length, deburr, and cut both inside and outside chamfers — all in one pass. That’s pretty impressive for a $110.00 tool that fits in the palm of your hand.
Product Features
1. Fully adjustable for cartridge length (and depth of chamfer).
2. Carbide blade cuts a 15° inside case mouth chamfer and 45° outside chamfer.
3. Case holder supported by sealed ball bearing raceway.
4. Tool includes removable, transparent plastic chip guard.
5. Tool can work in any orientation (vertical, horizontal, or any angle).
The Giraud Tri-Way Trimmer is designed to be powered by a portable hand drill, drill press, or other dedicated rotating power source. The tool indexes off the shoulder of your cases, but the blade adjusts so that cartridge overall length (COAL) can be controlled with precision. Constructed out of 6061-T6 aluminum and 303 stainless steel, the Tri Way tool should last a lifetime. Note: This tool is not universal. The Tri Way is dedicated to a single cartridge and “related” cartridges with similar body dimensions. Thus you need a specific tool for each cartridge family. For example, the .308 Win tool will also trim .243 Win, .260 Rem, and 7mm-08.
Cartridge Sizes Available for Giraud Tri Way Trimmer:
.223 Remington (Also trims .17 Remington, .204 Ruger, .222 Remington, .222 Remington Magnum)
7.62 x 39mm (Russian)
.300 Blackout (Also trims .17 Rem Fireball, .20 Vartarg, .221 Fireball)
.308 Winchester (Also trims .243 Winchester, .260 Remington, 7mm-08)
.30-06 Springfield (Also trims .25-06, .270 Winchester, .280 Remington)
.300 Winchester Mag (Also trims Also trims .264 Winchester Magnum, 7mm Remington Magnum, .308 Norma Magnum)
Product Tip from EdLongrange. We welcome reader submissions.
Share the post "Trim, Chamfer, and Deburr Brass Cases with Giraud Tri-Way Tool"
On October 7th, Smith & Wesson, a leading American gunmaker for over 169 years, celebrates the Grand Opening of its new Tennessee Headquarters and production center. The Grand Opening event will feature a shooting day, product demonstrations, and fun events.
Since 1852, Smith & Wesson had been based in Springfield, Massachusetts. Now a big change is taking place. The company announced in September 2021 that it would relocate its headquarters from Massachusetts to East Tennessee, along with distribution, assembly, and other major operations. The Smith & Wesson Headquarters Grand Opening and Fall Festival event takes place Saturday, October 7 from noon to 8 p.m. at 1852 Proffitt Springs Road in Maryville, TN.
The Shooting Wire reports that: “The new Maryville facilities will house the company’s headquarters, plastic injection molding, pistol and long gun assembly and distribution centers. The company’s longtime home, Springfield, Massachusetts, will remain operational with all forging, machining, metal finishing, and revolver assembly staying behind. More than 1,000 S&W employees will still be employed there, but it’s a decided diminishment for the facilities that have been home to the company since 1832. More than 750 jobs are relocating from Springfield, Massachusetts, Deep River, Connecticut and Columbia, Missouri, to Maryville.”
Smith & Wesson’s President and CEO Mark Smith cited several key factors in the decision to move S&W’s corporate HQ from Massachusetts to Tennessee:
Support for the 2nd Amendment
Business friendly environment
Quality of life for employees
Cost of living and affordability
Access to higher education institutions
Availability of qualified labor for operations
Favorable location for efficiency of distribution
GunTalk Media Will Stream Live from the Grand Opening Gun Talk Media will broadcast LIVE from the Grand Opening of Smith & Wesson’s new facility on October 7, 2023. Beginning at 1:00 pm EST Ryan Gresham and Kevin Jarnagin host a LIVE broadcast throughout the day, giving viewers who might not be able to attend an inside look at the grand opening.
This broadcast provides an exclusive look at the new premises, interviews with key personnel, and insights into the latest offerings from one of the most renowned firearms manufacturers in the world.
Gun Talk LIVE Schedule on Saturday, October 7, 2023:
1:00 pm: S&W – Mark Smith, President & CEO
1:30 pm: S&W/Mighty Oaks Foundation – Chad Robichaux, Founder of Mighty
2:00 pm: USCCA – Maria Julianna
3:00 pm: S&W – Jerry Miculek, S&W Brand Ambassador
3:30 pm: Gatorz Eyewear – Scott Melton, Product Manager
4:00 pm: C&G Holsters –Chris Burns, Founder & President
4:30 pm: Rugged Rare – Travis Ferguson, VP of Sales & Marketing
5:00 pm: Black Rifle Coffee Company – Michael Shea
Grand Opening Silent Auction To Support Local Tennessee Charities
There is a special auction connected with Smith & Wesson’s TN Grand Opening. The Smith & Wesson Grand Opening Silent Auction is auctioning off over $20,000 worth of Smith & Wesson and partner products to support local East Tennessee charities. This Silent Auction is open to the public, and concludes 10/7/203 at 7:00 pm EST. CLICK HERE to see All Auction items.
Share the post "Smith & Wesson Opens New Tennessee Headquarters October 7th"
Ever wondered what the air around a moving supersonic bullet really looks like? Check out this video from the Bryan Litz Ballistics Facebook page. This is a Schlieren video* of a 6mm 109gr Berger LRHT bullet at about 2800 fps as fired from Francis Colon’s PRS rifle at the Applied Ballistics Lab.
Bryan Litz notes: “You can clearly see the compression (shock) wave at the front of the bullet. A compression wave is formed when the air has to move faster than the speed of sound to get out of the way, which is certainly the case for this bullet which is moving about 2.5 times the speed of sound (Mach 2.5).
That shock wave is the ‘snap’ you hear when bullets fly past you if/when you’re downrange. Also, compressing the air into a shockwave takes energy, and that energy comes directly out of the forward velocity of your bullet and gets converted into heat and noise as the shock wave forms and dissipates.
The turbulent wake at the base of the bullet shows where/how base drag applies. The third and smallest component of drag for a supersonic bullet is skin friction drag, which is a viscous boundary layer effect, and is the least visible in this image. So as you head to the range or the hunting stand, think about the absolute violence your bullets are committing in the atmosphere, before they even reach the target!”
Sherri Jo Gallagher, the second woman in history to win the NRA High Power National Championship, sports Eye Protection at Camp Perry. The first lady High Power Champion was Sherri’s mother, Nancy Tompkins.
In response to a Bulletin article about Protective Eyewear, one of our Canadian readers posted a personal story. His account demonstrates the importance of wearing eye protection whenever you shoot — no matter what type of firearm you are using — even air rifles. We hope all our readers take this to heart. All too often at rifle matches we see shooters, even some top competitors, risking their vision by failing to wear eye protection.
Eye and Hearing Protection are now MANDATORY for Highpower Rifle competitors and Pistol shooters in all CMP-affiliated matches. The 2020 CMP Highpower Rifle, Pistol, and CMP Games Rulebooks all contain the following rule: “All competitors and competition officials are required to wear appropriate eye and hearing protection when on shooting range firing lines during highpower rifle or pistol firing. All competitors must comply with this requirement before they can participate in a CMP sponsored or sanctioned competition. Competitors are responsible for selecting their eyewear and hearing protection.”
Eye Protection — Lesson Learned by Nicholas from Canada
As a boy on a mixed farm on the plains the first shooting stick I owned was a Red Ryder BB gun. My Dad bought it for me as I showed a keen interest in the shooting and hunting sports. I was about 9 years old at the time.
We had literally thousands of sparrows in our large farm yard and they liked to roost on the steel railings in the barn loft. I took to slowly thinning out their ranks by flashlight at night as these little winged pests settled in the farm buildings.
One evening as I slayed sparrow after sparrow in the barn loft — with about a dozen farm cats following me to consume these easy meals, I fired at another bird centered in my flashlight beam.
However, my aim was a bit low — and the copper pellet hit the steel beam square on. Instantly I felt a sharp pain as the BB bounced back and hit me squarely between the eyes on the bridge of my nose – drawing blood from the partial penetration into the skin. A half inch either way and I’d have lost an eye!
Never, never, never shoot at any target with a steel background with any firearm, even a BB gun – is the hard lesson I learned, and wear the best shooting glasses that money can buy!
PLEASE REMEMBER THAT!!
Editor’s Comment: Among competitive pistol shooters, the use of safety eyewear is universal. You’ll never see Rob Leatham, Julie Golob, or Jerry Miculek competing without eye protection — for good reason. The handgun sports’ governing bodies effectively enforce mandatory eye protection policies. We wish the same could be said for competitive rifle shooting. We often see benchrest, High Power, and F-Class competitors shooting without eye protection. We’ve heard all the excuses, yet none of them trump the safety considerations involved.
We recommend that all shooters and hunters employ eye protection whenever they use firearms or are at a location where live fire is taking place. You only have two eyes. A tiny bullet fragment or ricochet is all it takes to cause permanent blindness in one or both eyes. As rifle shooters, we place our eyes a couple inches away from a combustion chamber operating at pressures up to 70,000 psi. I know quite a few guys who will religiously put on safety glasses when running a lathe or a drill press, yet the same guys won’t use eye protection when shooting their rifles — simply because it is “inconvenient”. That’s nuts. It doesn’t matter is you are a cub scout or a multi-time National Champion — you should wear eye protection.
I will give you a personal example. A year ago I was shooting a 9mm pistol. One of the cartridges had a primer burst outward blowing small particles, some brass, and a piece of the pistol’s extractor right back into my eyes. Thankfully I was wearing good wrap-around safety glasses. No injuries at all. But without those safety glasses, this could have been very serious. I always wear safety glasses with ALL firearms. Shown below is the same kind of primer blow-out I experienced, but with a .270 Win rifle cartridge.
Be wise — protect your eyes. To learn more about eyewear safety standards, and to learn about the latest options in ANSI Z87-certified protective eyewear, read our article on Eye Protection for Shooters.
Share the post "Always Wear Eye Protection — You Only Have One Set of Eyes"
Jerod’s Tactical Trio
Many guys are lucky to have just one accurate tactical rifle fitted with a custom barrel and high-end optics. Well forum member Jerod (aka Stinnett1981) has three!
Jerod calls his tactical trio the “Three Amigos”. All are built with Manners Composite stocks and Bartlein barrels. But there are three different chamberings. In order below (from top to bottom) are: .308 Win (Bartlein 5R, 1:10″ twist); .223 Rem (Bartlein 5R, 1:8″ twist);,and 6.5×47 Lapua (Bartlein 5R 1:8.5″ twist). Read on for a full description of each build.
The tan rifle is Jerod’s .308 Winchester. It has a Manners T4A stock, trued Rem 700 SA, Badger M5 DBM, and Bartlein 5R 10-twist HV contour finished at 23″. The optic is a Bushnell XRS 4.5-30X50mm FFP with G2 reticle scope.
The Green rifle is a .223 Remington. This has a Manners T4 stock, trued Rem 700 SA, Badger M5 DBM, and Bartlein 5R 8-twist HV contour finished at 23″. On top is a Nightforce NXS F1 3.5-15X50mm FFP with MLR 2.0 reticle scope. Jerod says: “This scope and reticle are awesome.”
The Black rifle is chambered for the 6.5-47 Lapua. Components are: Manners T4A stock, Stiller TAC 30, Badger M5 DBM, Bartlein 5R 8.5-twist bull barrel (1″ at muzzle) finished at 26″. The scope is a Nightforce NXS 8-32X56mm with NP2DD reticle.
What Comes Next — A Rimfire Maybe?
While Jarod’s Three Amigos make up a very impressive tactical troika, we’d like to see one more rifle added to the mix — a .22 LR rimfire rig, set up with a similar stock. That would be perfect for low-cost cross-training, or competition in Rimfire Tactical matches. Jerod could build the “fourth Amigo” using a rimfire action. Here is just such a rifle, built by Brian of GA Precision with a modified Rem 40X action in a Manners T4A stock (matching Jerod’s centerfire stocks). Pretty cool eh?
Could This Be the Fourth Amigo? 40X Rimfire in Manners Stock
Brian, a gunsmith at GA Precision, built this rimfire rig with GAP colleague Anthony Soukup.
Share the post "The Three Amigos Rifles — Los Tacticales!"
When your cases become hard to extract, or you feel a stiff bolt lift when removing a cartridge, it’s probably time to full-length size your cases, and “bump” the shoulder back. We generally recommend bumping shoulders each time you reload, after the initial fire-forming. Benchrest and F-Class benchrest shooters, running relatively high pressures, typically full-length size every load cycle, bumping the shoulder .001-.003″. High Power shooters with gas guns generally full-length size every time, and may need to bump the shoulders .003″ or more to ensure reliable feeding and extraction.
Use Shims for Precise Control of Shoulder Bump
Some shooters like to set the “default” position for their full-length die to have an “ample” .003″ or .004″ shoulder bump. When they need less bump, a simple way to reduce the amount of shoulder movement is to use precision shims in .001″ (one-thousandth) increments.
Here are reports from Forum members who use the shims:
“Great product. I have my die lock ring(s) adjusted for the shortest headspace length on my multiple chambers 6BRs and 6PPCs. When needing a longer headspace, I just refer to my notes and add the appropriate shim under the lock ring. Keep it simple.” — F.D. Shuster
Mats Johansson writes: “I’ve been using [shims] since Skip Otto (of BR fame) came out with them. I set up my dies with the .006″ shim, giving me the option of bumping the shoulder a bit more when the brass gets old and hardens while still having room to adjust up for zero headspace, should I have missed the original setup by a thou or two. Hunting rounds can easily be bumped an extra .002-.003″ for positive, no-crush feeding. Being a safety-oriented cheapskate, I couldn’t live without them — they let me reload my cases a gazillion times without dangerous web-stretching. Shims are a must-have, as simple as that.” — Mats Johansson
Sinclair Die Shim Kit — Seven Shims for $14.99
Sinclair Int’l (through Brownells) offers a seven-piece set of Sizing Die Shims that let you adjust the height of your die (and thereby the amount of bump and sizing) in precise .001″ increments. Sinclair explains: “Some handloaders will set their die up to achieve maximum sizing and then progressively use Sinclair Die Shims between the lock ring and the press head to move the die away from the shellholder. Doing this allows you to leave the lock ring in the same position. These shims are available in increments of .001″ and work very well.”
Seven Shims from .003″ to .010″
Sinclair’s $14.99 Die Shim Kit (item 22400) includes seven shims in thicknesses of .003, .004, .005, .006, .007, .008, and .010. For ease of use, shim thickness is indicated by the number of notches cut in the outer edge of each shim. Even without looking you can “count” the notches by feel.
Share the post "Die Shims for FL Sizing Dies Give Precise Control of Bump"
While we envision using this target with optics at long range, Birchwood Casey says that open sights show up well against the white background, making these targets well-suited for indoor ranges or use in low light conditions.
Plant Engineer Darren Leskiw answered: “Beyond the normal equipment, I’d say my electronic scale. Using the beam balance for the past 9 years was ok, but nowhere as easy as using an electronic scale.”
In response to a Bulletin article about 
Eye Protection — Lesson Learned
Editor’s Comment: Among competitive pistol shooters, the use of safety eyewear is universal. You’ll never see Rob Leatham, Julie Golob, or Jerry Miculek competing without eye protection — for good reason. The handgun sports’ governing bodies effectively enforce mandatory eye protection policies. We wish the same could be said for competitive rifle shooting. We often see benchrest, High Power, and F-Class competitors shooting without eye protection. We’ve heard all the excuses, yet none of them trump the safety considerations involved.
Jerod’s Tactical Trio
