Eurooptic vortex burris nightforce sale




teslong borescope digital camera barrel monitor


As an Amazon Associate, this site earns a commission from Amazon sales.









March 17th, 2024

Sunday GunDay: F-Open Beast from Ireland on St. Patrick’s Day

Enda Walsh F-Class Ireland

For this St. Patrick’s Day 2024, our Sunday GunDay story features a beautiful F-Open rifle from Ireland. This was crafted a decade ago, but it’s still one of our favorites. It has a handsome thumbhole custom stock, and it boasts an unusual chambering — the .300 Blaser Magnum. This impressive rig carries its barreled action in a massive barrel block — not often found in F-Class rigs.

.300 Blaser Magnum Cartridge F-ClassHere’s a very impressive F-Class project from Enda Walsh of Custom & Precision Rifles in Ireland. This rifle features a free-floated BAT Machines ‘M’ action with a Benchmark barrel chambered in .300 Blaser Magnum (300 BM). The barreled action is secured with a large barrel block. This handsome, long-wheelbase F-Class rig demonstrated some stunning accuracy at 1000 yards when it was brand new. Enda tells us: “I couldn’t wait until the rifle was fully polished before testing. I went to MNSCI (Midlands National Shooting Centre of Ireland) to shoot my new barrel block rifle. I came home with a huge smile on my face after shooting a five-shot group with 1.5″ vertical and 3″ horizontal at 1000 yards in an 8 mph wind.”

Click Photo for full-screen version
Enda Walsh F-Class Ireland

AUDIO FILE: Enda Walsh Talks about his New .300 BM Barrel Block F-Open Rifle.

Below you can see the barrel block in the handsome Padouk wood and carbon fiber stock. Enda uses high-spec epoxy layered between the barrel and the aluminum barrel block. Yes, those three “super-sized” cartridges are .300 Blaser Magnums loaded with with 230gr Berger Hybrids. The smaller cartridge is a .308 Win (with 150gr bullet), provided for comparison. This .300 BM drives the 230s at 3140 FPS.

Enda Walsh F-Class Ireland

CLICK HERE for Horizontal Version of above photo.

.300 Blaser Magnum Cartridge F-Class.300 BM Runs 230-grainers at 3140 FPS!
Enda tells us: “I wanted something to beat the 300 WSM. After studying the .300 Blaser Magnum, I decided this was the [chambering] that could deliver high accuracy consistently and be able to shoot the 230gr Bergers at 3140 FPS. Using H1000 powder, they do very well but the case life is short at these speeds. We have backed them off a little and retained the accuracy and extended case life considerably.”

Enda says the 230gr Hybrids at 3140 fps drift much less in the wind than do 7mm 180gr Hybrids launched from a 7mm WSM. A quick run through JBM Ballistics for a 10 mph, full-value crosswind at 1000 yards (sea-level) tells the tale. JBM predicts 4.2 MOA horizontal deflection for the .30-caliber 230s at 3140 fps vs. 5.0 MOA for the 7mm 180s at 3050 fps. That 0.8 MOA difference represents more than 8 inches at 1000 yards. When you consider the small size of the F-Open X-Ring, you can see how the enhanced ballistics could be a game-changer in the wind.

Note the metal bag-rider “keel” on the underside of the buttstock.
Enda Walsh F-Class Ireland

Barrel Block Acts as Heat Sink
Enda needed a way to beat the heat, with this big case. He explains: “Because of the large case volume (roughly 82 grains of usable capacity) there are two issues. Firstly, throat wear, and secondly heat. To combat this I have a new reamer on order with slight alterations which will help the throat wear. To combat the heat affecting a 34″ barrel I decided to build a barrel block rifle. It was previously mounted in a standard stock, and when the barrel got too hot accuracy was an issue. The barrel block acts as a heat sink and also shortens the overhanging barrel considerably, which has greatly improved accuracy over a complete string. The block is made from aircraft grade aluminium.” As a final note, Enda wanted to thank Pacific Tool & Gauge for the special-order reamers.

More .300 Blaser Magnum F-Classers from Enda Walsh in Ireland
Here are three more .300 Blaser Magnum F-Class rifles Enda built for the 2014 European Championships at the Bisley Range in the UK. The color scheme comes from the Irish Flag.

Enda Walsh F-Class Ireland

And here is Enda Walsh himself shooting of of these rifles in Ireland:

Enda Walsh F-Class Ireland

Permalink Competition, Gear Review, Gunsmithing 1 Comment »
March 17th, 2024

For St. Patrick’s Day — Shamrock and Pot of Gold FREE Targets

Free downloadable pot of gold Ireland St Patricks day shamrock target NRA

Today, March 17th, is St. Patrick’s Day. With the burden of rising prices, conflict in the Mideast, and the continuing decline of a corrupt, senile President, it may be hard to feel lucky in 2024, but at least you can print out some lucky targets and have fun at the range. Here are two free Irish-themed targets to provide some fun and a bit of challenge. Shoot these Shamrocks or the Pot of Gold and see if you have the “Luck of the Irish”.

To help celebrate this traditional day of Irish pride, the NRA has created two (2) fun targets you can download, print, and shoot. Try out these free targets. Click each Irish target photo below to open a high-rez PDF file you can download and print. NOTE: The PDFs should open up in your browser, then you can click the download icon. Save to your device and then print.

The first target features a large four-leaf clover in the middle, with 17 other smaller three-leaf shamrocks around the outside. With five black bulls-eyes in the center graphic, that gives you a total of 22 aiming points for shooting fun. For added challenge we suggest you set this Shamrock Target at 100 yards for rimfire rifle and 200 yards for a centerfire gun.

CLICK Below for Big Shamrock 4-Leaf Clover PDF Target

Free downloadable pot of gold Ireland St Patricks day shamrock target NRA

The second target offers the legendary Pot of Gold at the end of the rainbow. Along with a big bullseye on the pot, there are 15 shamrocks in gold circles, plus five small gold, diamond-shaped nuggets with tiny bullseyes. Those small red dots will be a challenge even at 100 yards. You’ll need a half-MOA (or better) rifle to “clean” this Pot of Gold Target, hitting the tiny red dots on the diamond nuggets.

CLICK Below for Big Pot of Gold PDF Target

Free downloadable pot of gold Ireland St Patricks day shamrock target NRA

Whether you’re Irish or not, these targets will hopefully bring you a bit of luck. Click each image above to open a high-rez PDF file that you can print out. Then, this St. Patty’s day, wear your green, grab your gear, and head to range for some fun shooting.

Permalink News, Shooting Skills No Comments »
March 17th, 2024

Stock Reborn: Second-Hand Anschutz Becomes F-Open Beauty

Anschutz 1411 stock gunsmithing project wood work palma rifle f-class F-Open stocking

Here is an interesting project by one of our Forum members. Martin C. (aka “Killick”) modified an Anschutz 1411 Match 54 rimfire prone stock to become a comfortable, great-tracking F-Class Open Division Stock. No Killick didn’t sacrifice a perfectly good rimfire rifle for this project — he bought the Anschutz stock by itself on eBay, then transformed it…

Killick explains: “This project started about seven years ago. I bought the Anschutz prone stock on eBay and whittled it a bit into a Palma rifle with a Barnard action and block and a Doan Trevor cheek piece and scope rail. Then about two years ago I decided to re-task the stock/action assembly into an F-Open rig. With more whittling, gluing, sanding, body fillering, sanding, filling, sanding, more sanding…and sanding, forming, priming, sanding, painting, waiting, painting, painting…painting and before you know it, Bob’s your uncle.”

Here is the eBay-sourced Anschutz 1411 stock, with new high-gloss blue finish, as initially modified for use in Killick’s centerfire Palma rifle. Looks nice!

Anschutz 1411 stock gunsmithing project wood work palma rifle f-class F-Open stocking

Next step was the addition of a 3″-wide wood fore-end for F-Open duties with front rest:

Anschutz 1411 stock gunsmithing project wood work palma rifle f-class F-Open stocking

Anschutz 1411 stock gunsmithing project wood work palma rifle f-class F-Open stocking

Almost done here… just needs priming and final painting:

Anschutz 1411 stock gunsmithing project wood work palma rifle f-class F-Open stocking

Here is Killick’s completed F-Open rifle with its much-modified Anschutz stock now finished in fire-engine red lacquer. This image shows the detail of the grip and customized cheekpiece.

Anschutz 1411 stock gunsmithing project wood work palma rifle f-class F-Open stocking

To learn more, visit Killick’s Anschutz Stock F-Class Project Thread on our Shooters’ Forum.

Permalink - Articles, Gunsmithing No Comments »