Emil Kovan is one of the top F-Class shooters in the world. He won the 2014 United States F-Open Championship. Earlier this month Emil finished second in F-Open Division at the 2016 Canadian National F-Class Championship in Ontario. Emil actually tied Open-class winner Shiraz Balolia for overall score AND “V”-count, but Emil was awarded second on the tie-breaker.
“What are the best components for an F-Open class rifle, and why?” That’s a question that I get asked all the time and will try to answer in this article. Two months ago, I was contacted by Duane, a gentleman I met at the 2015 F-Class Nationals. He was interested in building a rifle with the new Master Class Low Profile F-Open Stock, created by Carl Bernosky and Alex Sitman of Master Class Stocks.
I have known Alex Sitman for many years, and use his stocks exclusively, but was not very familiar with his new Low Profile F-Open stock. After a brief conversation with Alex, I placed an order, and had the stock inletted and bedded at my shop in a month. My first impression was “Wow that’s a long stock” — the forearm is significantly longer than on the original Master Class F-Class prone stock. I bolted the barreled action in, and squeezed the end of the forearm and barrel together, the stock flexed a little bit, but not as much as other designs that I have tested. I think that’s due to having “more meat” in the receiver area. The full stock depth continues farther forward that on some other “low profile” designs. That makes the stock stiffer in the vertical plane, reducing the hinging effect forward of the action. The stock was finished in gloss black per the customer’s request. Interestingly, I found that the multiple layers of paint and clearcoat stiffened the stock up quite a bit.
CLICK IMAGE below for full-screen version
Low Center of Gravity Tames Torque
Compared to the original Master Class F-Open stock, the barrel sits about an inch lower. Lower center of gravity equals less torque, and that is very important when shooting heavy bullets in fast twist barrels. Another significant improvement is that the toe of the stock is flat and parallel to the forearm. I added a 3/4″ track rail in the rear, and milled the underside of the fore-end to create two parallel “rails” in the front to help the stock track better.
One of the biggest reasons why I like Master Class stocks, is the pistol grip. I don’t shoot “free recoil” and a comfortable pistol grip is super important to me when selecting a stock. The new Master Class Low Profile stock shares the same grip as the old model. This allows the stock to accommodate either a “hard hold” style or a more free-recoil style of shooting — whatever the rifle’s owner prefers. This design versatility is one reason I recommend Master Class stocks. Shooters may experiment with either shooting style to find what suits them best.
Cartridge Choice — A 40° .284 Win Improved
Duane decided to have the barrel chambered for my 284 KMR IMP (Improved) wildcat. What is .284 KMR IMP and why choose it over the straight .284 Winchester? Improved by definition means “made better”, I took a great cartridge, and modified it to increase capacity, reduce pressure, and increase brass life.
There are many “improved” variants of the original .284 Winchester: 7mm Walker, .284 Shehane, .284 Ackley and so on. My version, the 284 KMR IMP, shares the .010″ blown-out sidewalls of the .284 Shehane, but I have further increased the case capacity by changing the shoulder angle from 35 to 40 degrees. The 284 KMR IMP allows you to almost match magnum cartridge velocity in a standard-bolt-face action. If you want to run 180gr-class 7mm bullets over 2900 FPS, it is cheaper and more convenient to have a barrel chambered in 284 KMR IMP than to spend $650 for a magnum bolt.
Tuning Loads for the .284 Win Improved Cartridges
The 284 KMR IMP seems to have two nodes, one around 2820 fps and other at 2940 fps. My match load clocks at 2935 fps with single-digit ES. Note –I selected that load based on accuracy, NOT raw speed. A lot of novice (or hard-headed) shooters make the mistake to push their cartridges to the max, and disregard more accurate loads at lower velocity.
The sport of F-Class is rapidly growing, and the equipment used is improving constantly. I remember that only few years ago, an F-Open rifle that could shoot sub-one-inch of vertical at 300 yards was considered competitive. Now, we are pursuing sub-one-inch vertical at 600 yards! It takes a great rifle to approach that goal, but it is also up to the shooter to learn and experiment as much as possible in order to achieve success.
Dies for an Improved .284 Win Cartridge
One of the biggest challenges in campaigning a wildcat cartridge has been obtaining great dies. When searching for custom dies, it almost seems like that the odds are stacked against us. The most common problem is wait-time — custom die orders can take months to be completed. Also, most custom die makers want you to send them two or three cases, each fire-formed three times. I find that funny because if could somehow properly size the cases for three fire-forming cycles, I would not need a sizing die.
Custom-made dies should size the case just right, but sometimes the die’s internal dimensions are slightly off, and this leads to problem number two: dies sizing too much (or even worse) too little. I had a one “custom” die that would not size the bottom of the case enough. This made the extraction of fired cases very difficult. I feel that the best option (if available) for shooters interested in wildcat chambers is to have their gunsmiths make the dies. I offer that die-making service in addition to barrel chambering.
BAT Machine “M” Action
Duane decided to use a BAT M action for this rifle, and I think that he could not have made a better choice. We are blessed with many good match-quality receivers: Barnard, BAT, Borden, Kelbly, Nesika, and Stiller just to mention a few. These are all very well-made and suitable for F-Class. Among BAT Machine Co.actions, I like BAT models M, MB, and 3LL best. I prefer these because because of their size (large bedding footprint) smoothness, timing, options available, and last but not least visual appearance.
Trigger: I recommend and use Jewell triggers. Other good options are: Kelbly, CG Jackson (good 2-Stage) Anschutz (best 2-Stage for Bat and Kelbly actions), Bix’N Andy, and David Tubb.
Barrel: Duane made another good choice here. He decided to go with a Brux 1:8.5″-twist, 4-groove cut-rifled barrel. If you look at the F-Class and Long Range benchrest equipment lists, you will see that cut-rifled barrels are currently dominating. Many records have been shot with both button-rifled, and cut-rifled barrels. I have shot both, and prefer cut-rifled barrels. I am not saying that button-rifled barrels are not capable of shooting as well as cut-rifled barrels, but on average, in my experience, four out of five cut-rifled barrels (from top makers) will shoot well, vs. three out of five buttoned barrels. YMMV, but this is what I’ve observed.
Scope: Duane’s rifle was fitted with a Nightforce 15-55x52mm Competition scope with DDR-2 reticle. This optic is ultra clear, reasonably lightweight (28 oz.), super reliable, and has 1/8 MOA clicks — what you want for long range F-Class competition. In this 15-55X NF model, I like the DDR-2 reticle best, because fine cross hairs (FCH) are hard to see in heavy mirage. The DDR-2 has a heavier horizontal line, with a center dot. March scopes are also very popular and very well-made.
Thanks for reading, and keep ‘em in the middle…
Emil Kovan Competition History:
– 2014 F-Class Open National Champion
– 2016 F-Class Open Canadian Championship, Silver Medal (tied for first on score)
– 2015 F-Class Open National Championship, Silver Medal
– F-Class Open National Championship Teams, 2015, 2014, 2013, Shooting Team Member
– Over 15 wins in Regional and State Championships in Palma, F-TR, F-Open
At the request of our readers, we provide select “Deals of the Week”. Every Monday morning we offer our Bargain selections. Here are some of the best deals on firearms, hardware, reloading components, and shooting accessories. Be aware that sale prices are subject to change, and once clearance inventory is sold, it’s gone for good. You snooze you lose.
1. Natchez — Special 5 Reloading Press Kit, $199.99
This is an excellent entry-level reloading kit, which is on sale for $199.99 at Natchez Shooters Supplies. We like the relatively compact Special 5 press for most reloading duties. Eventually you may want to add an additional, large heavy press, but this will get the job done. This kit includes an RCBS Powder Measure, Digital Scale, Powder Trickler, Hand Priming Tool, Load Manual, Loading Tray, and more. It’s hard to beat this combination of tools for under $200.00.
Walker’s new Razor-X and Razor-XV operate like electronic muffs — allowing you to hear commands and conversations while still blocking loud noises. The Razor-X combines a collar unit (containing the electronics) with retractable, foam-tipped ear buds. Unlike conventional earmuffs, the Razor-X system doesn’t interfere with your cheek weld. The patent-pending earbuds provide an impressive 31dB of noise reduction, with the ability to hear commands. To ensure a good fit (for best noise reduction), the Razor-X and Razor-VX come with two styles of noise-reducing foam tips. An AC wall adapter with USB port and a one-meter micro USB cord is provided. READ Razor-X User Reviews.
We like reactive targets. It’s fun to “ring steel” and see a target move instantly when hit. For just twenty bucks (including shipping), it’s hard to go wrong with this 8″ AR500 Steel Gong. The 8″-diameter size is big enough for zeroing at 200 yards, yet offers a nice challenge at 500 yards and beyond. There is also a 6″-diameter model for $16.00.
4. Cabelas — Big Ammo Sale Plus FREE Shipping
Right now, Cabela’s is running a big sale on all types of ammunition from major manufacturers. Save as much as 20% off regular pricing. For example, Winchester 9mm pistol ammo is marked down from $13.99 to $11.99 for 50 rounds. And PMC X-Tac 5.56×45 ammo is reduced from $9.99 to $8.49 for 20 rounds. Plus, you can get FREE SHIPPING on all orders of $99.00 or more. Use Code 86BUY during checkout (code valid through 8/31/2016).
5. Kelbly.com — 15% Off Discount on All Products
Looking for a Panda or Atlas Action, or a complete match rifle? Here’s a great promotion from our friends at Kelbly’s. Now through Tuesday, August 23, 2016 you can get 15% of ANYthing on the Kelblys.com website. That includes rifles, actions, stocks, barrels, scope rings, muzzle brakes, Berger bullets, accessories and more. To save big, use code 15ALL at checkout. Don’t delay — this offer expires at 11:59 pm on September 1, 2016.
6. Midsouth — Complete Case Tumbling Kit, $73.70
This brass tumbling system contains everything you need to clean your cartridge brass: Vibratory Case Tumbler, Rotary Media Separator, 6 lbs. of Corn Cob Media, and 8 oz. of Brass Polish. Right now this whole system is on sale at Midsouth for just $73.70. The case tumbler, which holds 450 .223 Rem cases or 1000 9mm cases, has a three-year motor warranty. This is a good deal for the package. You could pay $65.00 for a good vibratory Tumbler by itself.
7. Natchez Shooters Supply — 325 Rounds .22 LR Ammo, $22.99
This Federal .22 LR ammo is just 7 cents per round — the kind of pricing on bulk rimfire ammo we used to see in the “good old days”. Act quickly, this $22.99 Federal .22 LR Ammo deal won’t last long. Each box contains 325 rounds — enough ammo for many sessions at the range. The bullets are 40 grains, solid lead.
8. CDNN — Browning A-Bolt with Nikon Scope, $639.99 w/Rebate
Right now you can get a nice, wood-stocked Browning A-Bolt III Hunting rifle in .308 Winchester for just $689.99. And, to sweeten that deal, the current “Browning Benjamins” Rebate program knocks $50.00 off, so the price (with rebate) is just $639.99. This package includes a Nikon Buckmaster II 4-12x40mm BDC scope. This same Browning/Nikon special is available in many other chamberings for the same price: .243 Win, .270 Win, .270 WSM, 7mm-08, .30-06 Spr, .300 Win Mag.
9. Browning — Save Up to $100 on Browning Firearms (Rebates)
Now through the end of September, 2016, Browning is offering substantial cash rebates on rifles, pistols, and shotguns. Save $100.00 on a shotgun, $50.00 on a rifle, or $25.00 with this rebate offer, good on firearms purchases made by September 30th. Browning makes some pretty darn good firearms. This Editor owns a Browning Citori Shotgun and it’s a gem. CLICK HERE for details and Rebate Form.
If you ever shoot factory ammo, you should consider getting Ammo & Ballistics 5. This resource book lists over 2,600 different loads for 190 cartridge types from 17 Mach 2 up to .700 Nitro Express, including the most popular centerfire and rimfire cartridges (both rifle and handgun). There are over 1,400 tables with ballistics data for nearly all commercially-loaded hunting ammunition sold in the United States (as of 2013, the publication date). Tables include velocity, energy, wind drift, bullet drop, and ballistic coefficient.
This book can be helpful when choosing ammo for a hunt. You can quickly compare the velocity and knock-down power of various types of commercial ammo. In addition, this book can help you choose a caliber/chambering for your next hunting rig, as you can compare factory load options.
Book Purchaser Reviews
“The data contained in this book is invaluable. If you don’t understand momentum vs. energy, MER and MEPBR, this book will help you gain an understanding. If you don’t know what the Taylor Knock Out (KO) Index is, this book will enlighten and inform.” — Daryl ID
“Great heaps of data! This volume has pages and pages of new data for .22LR like the hot Velocitor, and also on the .22 WMR from 30 grains up into the 50s. Most importantly there is lots of range data, drop, windage, kinetic energy, etc. — Terrific reference guide….” — E. Svanoe
In this .308 Win test, 70° F ammo shot 96 FPS slower than ammo heated to 130.5° F. And the 130.5° ammo was 145 fps faster than ammo right out of the freezer (at 25.5° F). That’s a huge difference…
EDITOR’s NOTE: The Sierra tester does not reveal the brand of powder tested here. Some powders are much more temp sensitive than others. Accordingly, you cannot extrapolate test results from one propellant to another. Nonetheless, it is interesting to see the actual recorded velocity shift with ammo temperature variations in a .308 Win.
Written by Sierra Chief Ballistician Tommy Todd This story originally appeared in theSierra Bullets Blog
A few weeks ago I was attending the Missouri State F-Class Match. This was a two-day event during the summer and temperatures were hot one day and hotter the next. I shot next to a gentleman who was relatively new to the sport. He was shooting a basically factory rifle and was enjoying himself with the exception that his scores were not as good as he hoped they would be and he was experiencing pressure issues with his ammunition. I noticed that he was having to force the bolt open on a couple of rounds. During a break, I visited with him and offered a couple of suggestions which helped his situation somewhat and he was able to finish the match without major issues.
He was shooting factory ammunition, which is normally loaded to upper levels of allowable pressures. While this ammunition showed no problems during “normal” testing, it was definitely showing issues during a 20-round string of fire in the temperatures we were competing in. My first suggestion was that he keep his ammunition out of the direct sun and shade it as much as possible. My second suggestion was to not close the bolt on a cartridge until he was ready to fire. He had his ammo in the direct sunlight and was chambering a round while waiting on the target to be pulled and scored which can take from a few seconds to almost a minute sometimes.
This time frame allowed the bullet and powder to absorb chamber [heat] and build pressure/velocity above normal conditions. Making my recommended changes lowered the pressures enough for the rifle and cartridge to function normally.
Testing Effects of Ammunition Temperature on Velocity and POI
After thinking about this situation, I decided to perform a test in the Sierra Bullets underground range to see what temperature changes will do to a rifle/cartridge combination. I acquired thirty consecutive .30 caliber 175 grain MatchKing bullets #2275 right off one of our bullet assembly presses and loaded them into .308 Winchester ammunition. I utilized an unnamed powder manufacturer’s product that is appropriate for the .308 Winchester cartridge. This load is not at the maximum for this cartridge, but it gives consistent velocities and accuracy for testing.
I took ten of the cartridges and placed them in a freezer to condition.
I set ten of them on my loading bench, and since it was cool and cloudy the day I performed this test I utilized a floodlight and stand to simulate ammunition being heated in the sun.
I kept track of the temperatures of the three ammunition samples with a non-contact laser thermometer.
The rifle was fired at room temperature (70 degrees) with all three sets of ammunition. I fired this test at 200 yards out of a return-to-battery machine rest. The aiming point was a leveled line drawn on a sheet of paper. I fired one group with the scope aimed at the line and then moved the aiming point across the paper from left to right for the subsequent groups.
NOTE that the velocity increased as the temperature of the ammunition did.
The ammunition from the freezer shot at 2451 fps.
The room temperature ammunition shot at 2500 fps.
The heated ammunition shot at 2596 fps.
The tune window of the particular rifle is fairly wide as is shown by the accuracy of the three pressure/velocity levels and good accuracy was achieved across the board. However, notice the point of impact shift with the third group? There is enough shift at 200 yards to cause a miss if you were shooting a target or animal at longer ranges. While the pressure and velocities changed this load was far enough from maximum that perceived over pressure issues such as flattened primer, ejector marks on the case head, or sticky extraction did not appear. If you load to maximum and then subject your ammunition to this test your results will probably be magnified in comparison.
This test showed that pressures, velocities, and point-of-impact can be affected by temperatures of your ammunition at the time of firing. It’s really not a bad idea to test in the conditions that you plan on utilizing the ammo/firearm in if at all possible. It wouldn’t be a bad idea to also test to see what condition changes do to your particular gun and ammunition combination so that you can make allowances as needed. Any personal testing along these lines should be done with caution as some powder and cartridge combination could become unsafe with relatively small changes in conditions.
Long Range Success with Lapua Scenars
With the interest in ultra-long-range shooting in the USA, we thought you might like to see how they shoot out past 2000 meters in Scandinavia. Recently, a new Norwegian long range record was shot in Sokndal in Norway, at the Bøstøl shooting range, using Lapua 300 grain Scenar bullets.
With the target at 2165 meters (1.345 miles), the shooters managed 2/10 hits on steel. The cartridge (as you might expect) was the powerful .338 Lapua Magnum. The load was 89 grains of Vihtavuori N570 pushing the 300gr Scenars at 815 ms (2674 fps). The firearm used was Accuracy International .338 LM AXMC rifle with 27″ barrel and suppressor. Before the record hits at 2165 meters, the team also engaged targets at 1639m, 1710m, and 1850m scoring 4/10 hits on 95 x 100 cm steel target (that’s roughly one meter square, just over 3 feet per side).
About the Location — Sokndal, Norway
Sokndal is the southernmost municipality in Rogaland county, Norway. It is located in the traditional district of Dalane. The administrative center of the municipality is the village of Hauge. Other villages in Sokndal include Li, Rekefjord, Sogndalsstranda, and Åna-Sira.
Here’s a significant new addition to our knowledge base for Long-Range shooting. Hornady has released a new Ballistics Calculator that employs bullet profiles derived from Doppler radar testing and 3D projectile modeling. Hornady’s Patent Pending 4DOF™ Ballistic Calculator provides trajectory solutions based on projectile Drag Coefficient (not static G1/G7 ballistic coefficients) along with the exact physical modeling of projectiles and their mass and aerodynamic properties. This new 4DOF (Four Degrees of Freedom) calculator also accounts for spin drift and the subtle VERTICAL effects of crosswinds.
We strongly recommend you watch this video from start to finish. In greater detail than is possible here, this video explains how the 4DOF System works, and why it is more sophisticated than other commercially-offered Ballistics calculators. There’s a LOT going on here…
Aerodynamic Jump from Crosswind Calculated
According to Hornady, the 4DOF Ballistics Calculator “is the first publicly-available program that will correctly calculate the vertical shift a bullet experiences as it encounters a crosswind.” This effect is called aerodynamic jump. The use of radar-derived drag profiles, correct projectile dynamics, aerodynamic jump, and spin drift enable the Hornady® 4DOF™ ballistic calculator to provide very sophisticated solutions. Hornady says its 4DOF solver is “the most accurate commercially available trajectory program … even at extreme ranges.”
“Current ballistic calculators provide three degrees of freedom in their approach — windage, elevation, and range — but treat the projectile as an inanimate lump flying through the air,” said Dave Emary, Hornady Chief Ballistician. “This program incorporates the projectile’s movement in the standard three degrees but also adds its movement about its center of gravity and subsequent angle relative to its line of flight, which is the fourth degree of freedom.”
Using Doppler radar, Hornady engineers have calculated exact drag versus velocity curves for each bullet in the 4DOF™ calculator library. This means the 4DOF™ calculator should provicde more precise long range solutions than calulators that rely on simple BC numbers or drag curves based with limited data collection points. Emary adds: “The Hornady 4DOF also accurately calculates angled shots by accounting for important conditions that [other ballistic] programs overlook.”
“This calculator doesn’t utilize BCs (Ballistic Coefficients) like other calculators,” added Jayden Quinlan, Hornady Ballistics Engineer. “Why compare the flight of your bullet to a standard G1 or G7 projectile when you can use your own projectile as the standard?” That makes sense, but users must remember that Hornady’s 4DOF projectile “library” includes mostly Hornady-made bullets. However, in addition to Hornady bullets, the 4DOF Calculator currently does list seven Berger projectiles, six Sierra projectiles, and one Lapua bullet type. For example, Sierra’s new 183gr 7mm MatchKing is listed, as is Berger’s 105gr 6mm Hybrid.
This Video Explains How to Use Hornady’s New 4DOF Ballistics Calculator
Using the 4DOF™ Ballistic Calculator:
The Hornady 4DOF Ballistic Calculator provides trajectory solutions based on projectile Drag Coefficient (not ballistic coefficients) along with exact physical modeling of the projectile and its mass and aerodynamic properties. Additionally, it calculates the vertical shift a bullet experiences as it encounters a crosswind, i.e. “aerodynamic jump”. The use of drag coefficients, projectile dynamics, aerodynamic jump, and spin drift enable the 4DOF Ballistic Calculator to accurately measure trajectories even at extreme ranges. It is ideal for both long range and moderate distances and is available for the low-drag precision bullets listed in the drop down menu of the calculator. For calculating trajectories of traditional hunting and varmint bullets using BCs (ballistic coefficients), you can use Hornady’s Standard Ballistics Calculator.
Here’s a tip we feature every year or so, because it is something that costs nothing, yet can be very useful in the reloading process. With a simple, easy modification to a fired case, you can determine the length to lands in your rifle barrel. As long as you set the tension right, the measurements should be repeatable, and you’ve just saved yourself $31 — the price of a commercial OAL gauge.
To achieve best accuracy with a rifle, you must control bullet seating depth very precisely, so all bullets end up in the same place relative to the entrance of the lands, every time. There may be multiple cartridge OALs which prove accurate. However, with each, you first need to determine a “zero” point — a reliable, and repeatable OAL where the bullet is “just touching” the lands.
There are tools, such as the Hornady (formerly Stoney Point) OAL Gauge, that will help you find a seating OAL just touching the lands. However, the tool requires that you use a special modified case for each cartridge you shoot. And, while we find that the Hornady OAL Gauge is repeatable, it does take some practice to get in right.
Make Your Own Length-to-Lands Gauge with a Dremel
Here’s an inexpensive alternative to the Hornady OAL tool — a slotted case. Forum member Andris Silins explains how to create a slotted case to measure length to the lands in your rifle:
“Here’s what I did to find length to lands for seating my bullets. I made four cuts into the neck of fire-formed brass. Then I pressed the bullet in lightly and chambered the entire gauge. As the cartridge chambers, the bullet slides back into the case to give you length to lands. It took less than five minutes to get it cut and working. A little light oil in the barrel just past the chamber helps ensure the bullet does not get stuck in the lands. It works great and is very accurate.
I made the cuts using a Dremel with a cut-off wheel. You can adjust tension two ways. First, you can make the cuts longer or shorter. Longer cuts = less tension. If you used only three cuts insted of four you would get more tension. The trick is to be gentle when you open and close the bolt. If you ram the bolt closed you may wedge the bullet into the lands. When you open the bolt it helps to keep a finger or two near by to guide the case out straight because the ejector wants to push it sideways.”
Craters may look interesting on the moon, but you don’t want to see them on your primers. Certain mechanical issues that cause primer craters can also cause primer piercing — a serious safety problem that needs to be addressed. If you have a gun that is cratering primers (even at moderate pressure levels), there is a solution that works with many rifles — send your bolt to Greg Tannel to have the firing pin hole bushed.
Shooters who convert factory actions to run 6BRs, 6PPCs or other high-pressure cartridges should consider having the firing pin bushed. These modern cartridges like to run at high pressures. When running stout loads, you can get cratering caused by primer flow around the firing pin hole in the bolt face. The reason is a little complicated, but basically the larger the hole, the less hydraulic pressure is required to crater the primer.
A limited amount of cratering is normally not a big issue, but you can reduce the problem significantly by having a smith fit a bushing in the firing pin hole. In addition to reduced cratering, bushing the firing pin often produces more consistent ignition.
This is a highly recommended procedure that our editors have had done to their own rifles. Greg Tannel (Gre-Tan Rifles) is an expert at this procedure, and he does excellent work on a wide variety of bolts. Current price for a bushing job, which includes turning the firing pin to .062″, is $92.00, or $100.00 with USPS Priority Mail return shipping.
If you have a factory rifle, a bushed firing pin is the way to go if you are shooting the high-pressure cartridges such as 6PPC, 6BR, 6-6.5×47 and 6.5×47. This is one of the most cost-effective and beneficial upgrades you can do to your factory rifle. For more info on the Firing Pin Bushing process, visit GreTanRifles.com, or email greg [at] gretanrifles.com. After clicking the link for GreTanRifles.com, Click on “Services” > “Shop Services” and you’ll see a listing for “Bush Firing Pin Hole & Turn Pin”. CLICK that Box.
Firing Pin Hole Bushing by Greg Tannel
Work Done: Bush firing pin hole and turn pin
Functions: Fixes your cratering and piercing problems
Price: $92.00 + $8.00 return shipping Total Price: $100.00
Actions for which Bushing is Offered: Remington, Winchester, Savage multi-piece pin, Sako, Kimber, Nesika, Stiller, BAT Machine, Kelbly, Lawton, Surgeon, Borden, Wichita, Hall, Ruger, Howa, Weatherby, Dakota, Pacific Tool, Phoenix, and Defiant bolt action rifle or pistol.
Actions for which Bushing is NOT Available: Case hardened receivers, ARs, Accuracy International (AI), Barnard, Big Horn, Cooper, Desert Tactical Arms, Kimber, Rosenthal, New Savage single piece pin, Rim fires, Falling block, Break open, Lever, Pump rifles, 1903-A3, CZ, Mauser.
How to send your bolt in to be bushed:
Send your bolt and firing pin assembly via snail mail, priority mail, or UPS. Please do not use FEDEX as it sometimes has delivery delays.Include your name, phone number, and return shipping address, and a note as to what you want done. Pack your bolt carefully and ship to: Gre’-Tan Rifles, 24005 Hwy. 13, Rifle CO 81650.
Due to the high volume of work, turn-around time for bolt bushing jobs can be 12 weeks (though it usually is faster). Customers can pay by check, money order, or credit card. For more information visit GretanRifles.com.
At the request of our readers, we provide select “Deals of the Week”. Every Monday morning we offer our Bargain selections. Here are some of the best deals on firearms, hardware, reloading components, and shooting accessories. Be aware that sale prices are subject to change, and once clearance inventory is sold, it’s gone for good. You snooze you lose.
1. Amazon — Caldwell Long Range Target Camera System, $349.49
Forum members have purchased this Caldwell Target Cam System and they’ve found that it works reliably, providing a clear signal to any WiFi-enabled mobile device (smartphone, iPad, Laptop). One member specifically tested the unit at 1000 yards and it functioned fine. NOTE: This system does NOT have a zoom camera lens, so you need to position the camera within 10 yards or so of the target. But if you place it to the side a bit, this shouldn’t be a problem. This system comes with a nice, fitted carrying case that holds camera, transceivers, antennas, and stands. You get a very capable system for under $350.00 (Amazon price includes free shipping for Prime members). You can also get this system from Midsouth for $357.02 (shipping extra).
2. Amazon — Tipton Gun Vise, $33.13 (free Prime Shipping)
This is an awesome deal on a durable, well-designed polymer Gun Vise that every rifle owner can use. Your Editor has one of these units which has served well for more than a decade. The base has compartments for solvents, patches, and tools. The cradles and pads contacting your gunstock are a soft, rubber-like material that is gentle on fine finishes. This vise is relatively light in weight, but sturdy enough to support big, heavy rifles. NOTE: This is currently back-ordered, but due in stock August 17, 2016.
3. Midsouth — Burris Eliminator LaserScope with $100.00 Rebate
The Burris Eliminator III is an impressive piece of electro-optical technology. The built-in laser rangefinder senses the distance to your target and the scope’s “brain” calculates the required hold-over. The calculated aiming point is then displayed with an illuminated red dot on the vertical cross-hair. Just put the bright red dot on the target and make the shot. We’ve used this scope out to 600 yards on small steel targets and it worked flawlessly. Right now you can get a $100 Factory REBATE plus attractive sale pricing from Midsouth. After rebate, the 3-12x44mm Eliminator III costs $1199.00.
Here’s a rifle with a smooth three-lug action and good trigger that can take any game in North America. The Browning A-Bolt is justifiably respected as a solid hunting rifle. The 300 Winchester Magnum chambering offers serious hitting power, even at long range. This rifle, with a blued barreled action, normally retails for $600.00+. Now it’s on sale for under $500.00. To sweeten the deal even more, right now Browning is offering $50 CASH BACK on Browning centerfire rifles purchased between August 1, 2016, and September 30, 2016. CLICK HERE for $50.00 REBATE FORM.
5. Grafs.com — Hornady Z-Max Poly-Tip Bullets, $64/500 and Up
It seems like the Zombie craze has run its course (thank goodness), so Hornady’s Zombie bullets are being sold off at very low prices. Graf & Sons acquired a truckload of the green-tipped Z-Max bullets. These are the same as the popular red-tip V-Max bullets, just with a different color for the tips. Choose .204, .224, or .308 calibers in a variety of bullet weights. Prices start at $63.99 for 500, 32 grain .204 caliber varmint bullets. That’s just $12.79 per hundred.
6. Grafs.com — Forster Co-Ax Reloading Press on SALE
The Forster Co-Ax is a unique press that loads very straight ammo. If you’ve been patiently waiting to acquire a Forster Co-Ax® reloading press, now’s the time to strike. Grafs.com has Co-Ax presses on sale at $289.99. That includes shipping charges (with one flat $7.95 handling charge per order).
7. Glen’s Army Navy — CCI 17 HMR Ammo, $10.99 for 50 Rounds
Here’s a good deal on 17 HMR ammo, our favorite cartridge type for small varmints. This quality CCI ammo is loaded with 20 grain jacketed SP bullets. Muzzle velocity is 2375 FPS. If you need 17 HMR ammo, you might want to act quickly. At this price this 17 HMR ammo will sell out.
8. Amazon — Two Rolls of 3″ Neon Target Stickers, $14.95
We like these bright Neon 3″ target stickers. They are big enough to see easily at 600 yards, giving you a 1/2 MOA target center at that distance. For $14.95 at Amazon.com, you get 250 3″-diameter self-adhesive centers (125 targets per roll) that stick to almost any surface The high-contrast fluorescent red/orange color provides an excellent HI-VIZ aiming point, along with good contrast for bullet holes that fall within the 3″ circle. To help line up your reticle cross-hairs, the target centers feature black markers at 3, 6, 9, and 12 O’clock.
David Tubb has come out with a new, improved version of his heavyweight 6mm match bullet. David’s new DTAC 115gr 6mm projectile is very slippery — the tested G1 1000-yard BC is 0.620. The DTAC 115 features a Rebated Boat Tail (RBT) design and a factory-pointed tip (what David calls a “closed nose”). This bullet is in production now, priced at $145.00 for 500 bullets. David tell us “the new DTAC 115 has arrived” and his company is currently filling backorders. New orders will be taken at DavidTubb.com starting Monday, August 15th. You can also call 806-323-9488 (8:30 am-4:30 pm CT) to order.
David explained the two main reasons why the Rebated Boat Tail (RBT) design was chosen for the new DTAC 115 bullet:
1. It is easier to precisely hold tolerances when manufacturing the 7 degree boat tail angle. Most conventional boat tails have 9 degree angles (or greater).
2. The RBT more efficiently obturates to the bore of the rifle barrel when fired. (It mimics a flat base bullet design). This will allow the RBT design to extend your accurate barrel life by reducing gas leakage around the bullet when fired in a worn 6mm throat.
NOTE: David does NOT claim the RBT offers a higher BC compared to a conventional boattail design.
DESIGN FEATURES: DTAC 115 Bullet with Rebated Boat Tail
Commentary by David Tubb
In the 1980s we shot 107 grain weight-range 6mm bullets for Silhouette and High Power competitions. Lower recoil and good wind drift were paramount in coming to the 6mm bullet diameter.
After I developed the 6XC case around 2003 I approached Sierra about making me a 6mm bullet in the 115 grain range. Sierra ran prototypes in 112, 115, and 120 grain configurations. I thoroughly tested these and decided on the 115 grain. In 2004 I used these at Camp Perry and the result was a Long Range National Championship Aggregate with a perfect 1450×101 score. Enough said….
In 2007 Sierra had just introduced its plastic-tipped bullets. I had them run a test batch of plastic-tipped 117 grain weights. These didn’t pass my criteria.
We then ran another test batch of 111 grain plastic tip 6mm bullets and they looked great in the Sierra tunnel tests. However when shot them over an Oehler 43 at 1000 yards the results indicated the plastic tips were deformed or nonexistent at the target. These didn’t pass my criteria.
FYI — that plastic tip deformation testing information preceded the Hornady “Plastic tips Are Bad” advertising campaign by more than seven years.
When using a .308 early in my High Power rifle career we shot 190 grain Sierras at the 600-yard stage. When 600-yard accuracy began to fall off a switch to a 185gr Lapua rebated boat tail brought the accuracy back. I remember shooting some very high X-Count scores with 185gr Lapuas. The reason the Lapua worked in a worn barrel is because the rebated boat tail allows the bullet to obturate to fit the worn throat and prevent less gas leakage around the bullet when fired.
I had a bullet-maker friend reform some 6mm 115s with a rebated boat tail (RBT) in 2015 and had excellent results. So it was a natural move to redesign the current DTAC 115 6mm with a RBT and a 7 degree boat tail.
Ballistic Coefficent and Stabilization
High BC Confirmed
David says, “The new DTAC 115 RBT testing is complete and [we] can claim a G1 1000-yard BC of 0.620″.
Required Twist Rate for Stability
David reports: “This bullet stabilized out of true 1:8″ twist or faster barrel at velocities approaching 3000 fps at sea level”.
Emil Kovan Competition History:
Craters may look interesting on the moon, but you don’t want to see them on your primers. Certain mechanical issues that cause primer craters can also cause primer piercing — a serious safety problem that needs to be addressed. If you have a gun that is cratering primers (even at moderate pressure levels), there is a solution that works with many rifles — send your bolt to 
Firing Pin Hole Bushing by Greg Tannel
After I developed the 6XC case around 2003 I approached Sierra about making me a 6mm bullet in the 115 grain range. Sierra ran prototypes in 112, 115, and 120 grain configurations. I thoroughly tested these and decided on the 115 grain. In 2004 I used these at Camp Perry and the result was a Long Range National Championship Aggregate with a perfect 1450×101 score. Enough said….
