Along with its main search engine, Google Inc. operates the Google Shopping web portal (www.google.com/shopping), where visitors can search for products offered by tens of thousands of online merchants. Google Shopping works great, unless you happen to be looking for gun stuff. You see, Google recently instituted a new policy blocking Google Shopping search results for many firearms-related products and accessories.
For example, searches for “ammunition”, “.308″, and “rifle” yield no results. This subject-matter-based filtering also stymies searches for prominent gun-makers, component suppliers, and gun accessory vendors. Google Shopping searches for “Beretta”, “Brownells”, “Glock”, “Nosler”, and “Winchester” all yielded this “fail” message: “Your search [term here] did not match any shopping results”. Google Shopping is even blocking results for “Leupold” — yet Leupold only makes optics. Whether you call this “filtering” or “black-balling”, the fact remains that Google Shopping is making judgments about what products (and vendors) shoppers will be allowed to view.
IMPORTANT: The firearm-related filtering ONLY is in place (for now) on the Google Shopping portal. The main Google search engine (www.google.com) still allows you to search for any keyword or search phrase. That means you can search for “rifle”, or “Glock”, or “Winchester” on the main Google search engine and you WILL get results.
Google Shopping Site Search Term Test
We did a quick sample of search terms on the Google Shopping site, testing a few dozen common terms for guns and firearms accessories. There were some surprising results, and many logical inconsistencies. “Rifle Shooting” was blocked, but “Shooting” returned results. “Reload” was blocked, but “Reloading” was allowed. Some filtering seems arbitrary. “Winchester” was blocked, but “Remington” worked. “Hornady” is blocked, but “RCBS” can be used. “Brownells” was blocked, but “Sinclair International” yielded results. “Nosler” is blocked, but “Sierra” was allowed. “Leupold” and “Weaver” are both blocked, but “Bushnell” and “Zeiss” are unrestricted. And spelling makes a difference. “Anschütz” is blocked, but “Anschutz” can be used. “Hollow Point” is blocked, yet “Hollowpoint” (as one word) is OK. You figure that out….
It’s hard to guess which search terms will work and which won’t, except you can be sure that most keyword phrases which include the terms “ammo”, “rifle”, or “firearm” will be censored. Likewise, most search terms based on cartridge types (Rimfire, 45 ACP etc.) or bullet diameters (5.56, 30 Caliber, 7mm etc.) are blocked. But you can still search for “gun”, oddly enough. And this editor can’t fathom why I can search for Bushnell, Zeiss, Swarovski, and Nikon, but not “Leupold”.
IMPORTANT: Keep in mind that this was NOT an exhaustive test of search terms, and Google could change or alter its “block list” at any time.
To explain its content-filtering system, Google Shopping recently sent an email to vendors around the country. As received by Hamlund Tactical and then posted on the web, that email declared:
Dear Merchant,
We’re writing to let you know about some upcoming changes to the product listings you submit to Google. As we recently announced, we are starting to transition our shopping experience to a commercial model that builds on Product Listing Ads. This new shopping experience is called Google Shopping. As part of this transition, we’ll begin to enforce a set of new policies for Google Shopping in the coming weeks. A new list of the allowed, restricted, and prohibited products on Google Shopping is available on our new policy page: http://www.google.com/appserve/mkt/ApI7UWRj6OCZpd.
Based on a review of the products you’re currently submitting, it appears that some of the content in your Merchant Center account, [Vendor Name], will be affected by these policy changes. In particular we found that your products may violate the following policies:
Weapons
When we make this change, Google will disapprove all of the products identified as being in violation of policies. We ask that you make any necessary changes to your feeds and/or site to comply, so that your products can continue to appear on Google Shopping.
To help you through this new set of policies and how to comply with them, we would like to give you some specific suggestions regarding the changes needed to keep your offers running on Google Shopping.
Weapons
As highlighted on our new policy page http://www.google.com/appserve/mkt/ApI7UWRj6OCZpd, in order to comply with the Google Shopping policies you need to comply first with the AdWords policies http://www.google.com/appserve/mkt/StQ08jAzM4fVtG. We do not allow the promotion or sale of weapons and any related products such as ammunitions or accessory kits on Google Shopping. In order to comply with our new policies, please remove any weapon-related products from your data feed and then re-submit your feed in the Merchant Center. For more information on this policy please visit http://www.google.com/appserve/mkt/GbBNIGHOribLzf.
In a masterful piece of Madison Avenue magic, BMW portrays its M5 “super-sedan” as the four-wheeled equivalent of a speeding bullet. In this clever, CGI-enhanced marketing video, an M5 is “shot” from a giant barrel. It then speeds across the Bonneville Salt Flats towards a giant bullseye — just like a bullet heading toward a target. Along its path, the M5 shatters a giant apple, and then slices through three giant water balloons. Far-fetched? Yes. But the illusion is superbly-crafted, making for two very compelling minutes of movie-making.
Watch BMW Video
Measuring the BMW M5 in Bullet Terms
How does the M5 measure up compared to real bullets shot from real rifles? With a 66.9″ body width, the BMW M5 is a 1700mm projectile. When we convert the M5’s rather porky 4350-pound curb weight* to grains, we find the M5 weighs an astonishing 30,450,000 grains. (Yes that’s 30.45 MILLION). The M5’s electronically-governed top speed is 155 mph. That equates to 277.33 fps — pretty slow by ballistics standards. A typical hunting projectile flies ten times as fast. And even a 9mm handgun bullet travels four times as fast.
M5 ‘Knock-Down’ Power More Than Adequate for Big Game
When it comes to knock-down power, a speeding M5 beats even a 50 BMG bullet hands down. At 500 yards, a 750gr A-Max fired from a 50 BMG has about 8625 foot/lbs of retained energy (this assumes 2700 fps MV).
By contrast, with a terminal velocity of 277.33 fps, the 4350-lb BMW delivers 5.199 Million foot/lbs of retained energy. We think that’s more that enough “hitting power” to cope with any size North American game. But there are certainly some “Zombie” Hunters who might still wish for more power.
How about trajectory? Well we can’t answer that one for you. Last time we checked, Bryan Litz had not calculated the G1 or G7 BC for a BMW M5, so we can’t figure the car’s come-ups using JBM Ballistics. Still, we’re sure that, if BMW gave Bryan an M5 to play with, he’d be happy to spend a few months gathering “data”. But we do suspect it might be a bit challenging to get a 4350-lb sport sedan to fly through the sky-screens of Bryan’s chronographs.
*BMW M5 curb weight based on Car & Driver Report and 7000 grains per pound conversion.
Eurenco (European Energetics Corporation) is a French company owned by the SNPE Group. Eurenco specializes in production of propellants and explosives. Eurenco currently owns and operates five modern production plants in Belgium (Clermont), Finland (Vihtavuori), France (Bergerac, Sorgues) and Sweden (Bofors AB, Karlskoga). Readers are doubtless familiar with Vihtavuori powders, which are marketed and distributed by the Nammo Lapua group based in Finland. Though Nammo Lapua distributes Vihtavuori powder, Eurenco actually owns the Vihtavuori factory located in Vihtavuori, Finland.
Eurenco Looks for Buyer for Vihtavuori Plant
On June 18, Eurenco stated that it is “considering” selling the Vihtavuori Ltd. production facility to a third party. This factory currently employs 100 workers, and has annual revenues of $15 million Euros.
Eurenco hopes to sell the plant to a Finnish company, and we are informed that at least one investment group from Finland is interested. Eurenco revealed no immediate plans to shut the facility or to curtail production while Eurenco seeks a buyer. However, Eurenco said that the primary reason for selling the plant was reduced military demand for Vihtavuori products in recent years.
No Change in Vihtavuori Powder Distribution in USA
We discussed the potential Vihtavuori factory sale with Adam Braverman, U.S. representative for Nammo Lapua. Adam first noted that Nammo Lapua is NOT a potential buyer for the plant: “That’s not on the table.” But Adam emphasized that he forsees no changes to the current Vihtavuori distribution scheme: “Vihtavuori powder buyers should expect ‘business as usual’. We do not forsee any price or product availablity changes in the short term. There is plenty of powder inventory available, so we can fill all existing demands through the end of 2012.” While Eurenco looks for a new owner of the Vihtavuori plant, there will be no changes to the current system of distribution of Vihtavuori powders in the USA. Adam said: “There is plenty of powder in the European warehouses, and Nammo Lapua will continue to export Vihtavuori propellants to the USA importers (Hodgdon and Kaltron) who will distribute them to our retailers. We do not anticipate any supply shortages.”
MidwayUSA is offering blemished bullets at very significant discounts — up to 51% off normal pricing. These are quality bullets from major manufacturers. However, they may have a variety of superficial external flaws, such as waterspots, discoloration, or tarnished jackets. If you need bullets for plinking, varminting, or game hunting, you can save big bucks with these “blems”. For example, .224-caliber 55gr Soft-Point bullets (stock #324450) are now just $9.79 per hundred! And you can save on large-caliber bullets as well. One of our researchers just ordered some .338 blems for fire-forming purposes.
Sale Find by EdLongrange. We welcome reader submissions.
Lapua has a very cool video — “eye candy” for any precision shooter. Definitely WATCH THIS VIDEO. This 12-minute video contains a surprising amount of “hard” info on Lapua products. As well, there are some amazing segments showing Lapua brass and rimfire ammo being produced. Watch carefully and you’ll see most of the processes used for forming and loading brass. Another short segment shows a Lapua technician inspecting a case for run-out. Neat.
The video spotlights some of the important American and international records set with Lapua ammo. You’ll see top 300m and Olympic rifle shooters in action, and there are also short comments from many champions, including American Benchrest legend Tony Boyer.
NOTE: This is long video — you may need to let it buffer (pre-load) for 10 seconds before playback. If that doesn’t work, let the entire video load, then hit the replay button. Please enable Javascript and Flash to view this VideoPress video.
Yes, this video is first and foremost a marketing tool, but that doesn’t lessen that fact that it is fascinating to watch. Lapua’s video also does a great job making our sport seem important and exciting — NRA take note! We suspect many of you will want to save the video to your computer for future viewing. That’s easy to do. Just click on the link below. (Note: After downloading, we suggest that PC users play it back through Windows Media Player. You can then drag the Media Player corners to expand the video viewing size.)
The anti-hunting Center for Biological Diversity (CBD) and six other groups last week filed a lawsuit designed to pressure the Environmental Protection Agency (EPA) into banning traditional ammunition containing lead components. EPA has twice denied petitions filed by CBD to ban traditional ammunition, citing correctly that it does not have the authority to regulate ammunition under the Toxic Substances Control Act. If bullets with lead components are restricted, this would affect target shooters as well as hunters because nearly all match bullets employ a lead core.
“This is a frivolous lawsuit clear and simple,” said Lawrence G. Keane, senior vice president and general counsel for NSSF. “There is no sound science that shows the use of traditional ammunition has harmed wildlife populations or that it presents a health risk to humans who consume game taken with such ammunition.” NSSF called on industry members, hunters and shooters to support an amendment to the Farm Bill that contains legislation that would clarify the exemption.
It’s vitally important to keep your ammo at “normal” temps during the hot summer months. Even if you use “temp-insensitive” powders, studies suggest that pressures can still rise dramatically when the entire cartridge gets hot, possibly because of primer heating. It’s smart to keep your loaded ammo in an insulated storage unit, possibly with a Blue Ice Cool Pak if you expect it to get quite hot. Don’t leave your ammo in the car or truck — temps can exceed 140° in a vehicle parked in the sun.
Insulated Case Does Double-Duty
Standard plastic coolers work fine, but if you don’t want to borrow the family’s food carriers, consider this Norchill insulated Cooler Bag. When not used to keep your ammo cool, the 7″ wide x 12″ high x 14″ long small Norchill Bag doubles as a gear carrier. Norchill bags feature dual-temp insulation and a waterproof inner liner. With side-zip compartments, Norchill Cooler Bags are more versatile than typical plastic coolers. These Norchill cooler bags are soft, collapsible and can be rolled up to fit into your carry on luggage. When not in use for ammo, they can be used to as a suitcase, or carry bag for cameras, optics, and electronic gear.
Norchill Bags come in three sizes and a variety of colors. Price starts at $39.99 for the small bag (12-can capacity) is $39.99. The 10″x12″x18″ medium bag has double the capacity (24 cans) and costs $49.99. There is also a jumbo 48-can capacity bag, 13″x13″x21″. But this is probably more capacity than you’d ever need.
To learn more about how ambient temperature (and primer choice) affect pressures (and hence velocities) you should read the article Pressure Factors: How Temperature, Powder, and Primer Affect Pressure by Denton Bramwell. In that article, the author uses a pressure trace instrument to analyze how temperature affects ammo performance. Bramwell’s tests yielded some fascinating results.
For example, barrel temperature was a key factor: “Both barrel temperature and powder temperature are important variables, and they are not the same variable. If you fail to take barrel temperature into account while doing pressure testing, your test results will be very significantly affected. The effect of barrel temperature is around 204 PSI per F° for the Varget load. If you’re not controlling barrel temperature, you about as well might not bother controlling powder temperature, either. In the cases investigated, barrel temperature is a much stronger variable than powder temperature.”
Stan Ware of SGR Custom Rifles, is one of the finest gunsmiths with whom we’ve worked. He’s also a talented shooter and an innovative wildcatter who’s not afraid to think “outside the box”. Stan competes in both Hunter Benchrest (HBR) and Varmint for Score (VFS) disciplines. In his quest to build the ultimate Hunter Benchrest cartridge, Stan created the radical “Wolfpup” wildcat, based on a 6mmBR parent case. Noting the dominance of 30 BRs in VFS matches, Stan wondered if a stretched 30 BR could work in HBR competition. The challenge was case capacity. Under HBR rules the cartridge must hold at least 45.0 grains of water, equal to the capacity of the classic 30/30 case.
To get the requisite HBR case capacity, Stan figured he needed to boost the volume of a 30 BR case significantly, so he would have to move the shoulder forward — a lot. He did this by running a 30 BR reamer deeper and deeper, test-firing brass along the way. After three reamer passes, he ended up with the capacity he needed (the Wolfpup holds 45.3 grains of water). But then he looked at the finished product — a case with almost no neck, and he wondered “how could this possibly work?”.
From Trashbin to Winner’s Circle
Ware’s prototype Wolfpup ended up so short-necked, so unlike any “normal” cartridge, that Stan figured it was “dead on arrival”. Stan told us: “I said ‘this ain’t going to work’ and I threw the brass in the trash can. Honest. But later I thought I better shoot it and see what it does.” There was one problem — Stan didn’t have a seating die. He noticed the short neck provided a bit of tension after fire-forming, so he literally seated some bullets, BIB 118s and 125s, with his fingers. For powder he used H4198 and started with 35 grains, one grain more than a 30 BR load. Stan then did a pressure work-up: “I actually went up to 41.0 grains and didn’t have a sticky bolt. I ended up at 37.9 grains of Hodgdon 4198 — that gave 3150 fps, where the sweet spot is.” (Later testing revealed a second accuracy node at about 3020 fps, using 36.4 grains of H4198).
Stan’s radical short-necked Wolfpup shot great from the get-go. Once he found the right velocity node, the gun shot in the ones and zeros with both 7-ogive and 10-ogive bullets, both 118s and 125s. The Wolfpup proved easy to tune — it’s not finicky at all. And it’s a winner. Stan began shooting the Wolfpup in 2006 in both VFS and HBR matches and the ‘Pup’ started winning matches right away. In 2007, Stan won the Wisconsin State VFS Championship shooting the Wolfpup. Most recently, in June 2010 at a Webster City, Iowa VFS match, Stan won the Grand Agg and posted high X-Count for the match, while placing first at 100 yards and second at 200 yards. How’s that for a cartridge that almost ended up in the trash bin?
Does Stan deserve an award for “most innovative benchrest cartridge design”? Stan chuckles at that notion: “I’m not a hero, not a genius. I really didn’t do anything. The fun part is thinking outside the box — for me anyway. Shooting is an age-old process of experimentation. You never learn it all.”
Why Does It Work?
How can such a radical case design perform so well? “That’s a good question,” Stan admitted. He then explained: “The 30 BR is inherently accurate, so I figured something based on the 30 BR should be accurate too. My personal belief is that the short neck doesn’t hurt you. Plus if the throat in the barrel is straight, the bullet can self-align. If the chamber is good, the bullet will self-center in the throat. In a regular case there’s not much room to do that, so a bullet can start off-center, and you don’t get the same results every time. A bullet in a conventional case is stopped from self-centering by the stiffer neck, particularly in a tight-clearance BR gun.”
Reloading the .30 Wolfpup
Stan’s Wolfpup chamber has a neck dimension of 0.330″. He turns his necks for a 0.327″ loaded round. Bullets are jammed .020″ forward of first contact with the lands. When he closes the bolt it pushes the bullet back in the case — almost a soft seat. Stan notes: “To start with I normally bump the shoulder .0005-.001″ so they go in easy. Just by doing that I get a little neck tension. I also use a bushing. Right now I’m running a .322, but it’s not particularly sensitive. I’ve tried one-thousandths increments up to a .325 bushing and couldn’t tell a lot of difference.”
Currently there are no production sizing dies for the Wolfpup. Stan uses two dies to size his fired brass: “I use a 30 BR bushing full-length die after each firing, but that doesn’t size the bottom half of the case. But I can shoot the brass four or five times with no problems.” After four to five firings Stan hits the bottom of the brass with a modified 6mmBR body die. Stan hogged out the top half of the body die so it doesn’t contact the top of the brass. For bullet seating, Stan uses a Wilson 30 BR seater die into which he ran the chamber reamer. This gives perfect case fit during seating operations.
If You Want a Wolfpup Rifle
Stan has received a number of requests to chamber Wolfpups for Hunter Benchrest shooters, and he will be building some for next season. Stan charges $300.00 for chambering, crowning, and headspacing a barrel. He also sells Wilson micrometer-top seater dies, customized for the Wolfpup, for about $110.00. If there is sufficient demand, he may start producing “one-pass” full-length sizing dies for the cartridge. Stan can also build complete benchrest, hunting, and long-range rifles in your choice of calibers. Visit SGRCustomRifles.com, or call (507) 274-5649.
About the Illustrated Gunstock
You’ll notice Stan’s stock contains scenes from Vietnam and a quotation. Here’s the story. A Vietnam combat veteran, Stan served “in-country” with the Army’s 509th Non-Divisional Combat Unit (out of Fort Riley) from 1965-1966. Shortly before he left Vietnam, Stan went to a shop to have a souvenir lighter engraved. He asked the vendor for an appropriate inscription. The shop’s metal-worker engraved: “War is a tragedy. It takes mans’ best to do mans’ worst.” That message, along with the combat scenes, were hand-painted on Stan’s rifle by his wife Susan, a talented artist. She spent more than 20 hours painting the rifle stock.
Here’s good news for AR shooters looking for a 6mm option. 6mm HAGAR brass is now available from Hornady, and it looks like this brass is quite good. Those of you who follow the National Matches at Camp Perry know that Carl Bernosky won multiple National High Power Championships shooting the 6mm HAGAR cartridge from an AR Platform rifle. The 6mm HAGAR was derived from the 30 Remington cartridge, and it has the same case head diameter as the 6.8 SPC, also a 30 Remington derivative.
The 30°-shoulder 6mm HAGAR is just about the longest 6mm cartridge that can be loaded in a two-column AR15 magazine and still feed reliably. The advantage of the 6mm HAGAR is that it offers enough “boiler room” to drive 6mm bullets to impressive velocities, yet it can still fit and function well in AR mags. But note, if you are restrained to a mag-length COAL, you can pretty much rule out using 95-108 grain bullets, because they would have to be seated too deep in the HAGAR case. That actually means that the “advantage” of the 6mm HAGAR’s case capacity is lost to some degree — at least when using long, heavy bullets. On the other hand, when loaded with shorter varmint and hunting bullets, such as Hornady’s 75gr V-Max, you can load to 2.260″ mag length and use nearly all of the HAGAR’s case capacity.
For this reason, we think the 6mm HAGAR may ultimately prove more popular with varminters than with the High Power crowd (at least those who do not want to modify their mags to allow heavy 6mm bullets to be seated longer.) If you’re using shorter bullets, you can fill up the HAGAR case and drive 60-75 grain projectiles at serious velocities.
6mm HAGAR Basics
The 6mm HAGAR uses a 6.8 SPC AR-15 bolt and 6.8 SPC magazines and a conventional upper receiver, barrel extension, and bolt carrier assembly. Typically this cartridge has been used for varminting, hunting, and High Power competition. We think the 6mm HAGAR should be a kick-ass cartridge for varminters shooting ARs with shorter varmint bullets.
On the other hand, because the 1.775″-long HAGAR case takes up so much space in an AR magazine, the 100-108gr bullets aren’t well-suited for mag-fed 6mm HAGAR applications (unless the mags are modified). These same 100-108 grainers DO work well in single-load situations provided the chamber is properly throated for such bullets.
NOTE: Some High Power shooters have slotted AR mags to allow loading of long bullets up to 2.340″ max, i.e. beyond normal mag length. See modified magazine at right.
Hornady’s 6mm HAGAR Brass Is Shipping Now
Until recently, 6mm HAGAR brass was hard to obtain. Cases could be formed from 30 Rem brass, but this was a tedious, time-consuming process. Now, however, quality 6mm HAGAR brass is available from Hornady. An initial run of 150,000 pieces of 6mm HAGAR brass was produced. Vendors who got some of the first run of HAGAR brass include AR-X Enterprises LLC (Robert Whitley) and Creedmoor Sports.
Robert Whitley reports: “We’ve received our first shipment of factory 6mm HAGAR brass from Hornady. This Hornady 6mm HAGAR brass is hard at the base but well annealed at the neck. The brass has a small primer pocket and a small flash hole. All of these features enable the brass to hold pressures well and to remain serviceable and usable for multiple re-loadings. Internal H20 capacity of the brass case is right around 37.0 – 37.5 grains of water weight. With its larger case capacity the 6mm HAGAR can accurately push the bigger 105gr to 108gr bullets in the range of 2800 fps (when these bullets are seated long and single-loaded, not mag-fed). However, because of its rather long case length (1.775″) relative to max mag-fed cartridge OAL of 2.260″, the 6mm HAGAR may work best with the smaller and lighter 6mm bullets (75gr and under).” [Editor: Do the math … 2.260″ minus 1.775″ leaves only 0.485″ clearance for a bullet to extend beyond the case mouth.]
Loading Long Bullets to Mag-Limited 2.260″ COAL Is Neither Practical Nor Wise:*
6mm HAGAR Brass, Dies, Mags and Complete Uppers Offered
Along with 6mm HAGAR brass (at $84.00 per hundred), ARX Enterprises has 6mm HAGAR dies, and magazines. ARX Enterprises is also building complete match and varmint AR-platform uppers chambered for the 6mm HAGAR. You can find out about all these products on Robert Whitley’s 6mm HAGAR web page. To order 6mm HAGAR uppers, die sets, brass, magazines and related products contact:
AR-X Enterprises, LLC (Attn: Robert Whitley)
199 North Broad Street
Doylestown, PA 18901
(215) 348-8789
e-mail: rcw3 [at] erols.com
*Left = 75gr Hornady V-Max at 2.260″ OAL (bullet diameter at mouth of case is .243″.)
Left Center = Berger 100gr BT at 2.260″ OAL (bullet diameter at mouth of case is only .225″.)
Right Center = Sierra 107gr MatchKing at 2.260″ OAL (bullet diameter at mouth of case is only .222″.)
Right = Hornady 105gr A-Max at 2.260″ OAL (bullet diameter at mouth of case is only .225″.)
After “exhaustive testing” with a variety of barrel lengths and twist rates, Savage has deep-sixed its plans to market a Model 10-based repeater rifle chambered for the 300 AAC Blackout cartridge. The reason? The Blackout cartridge simply shot poorly when loaded with heavy bullets for subsonic applications. Since Savage could not achieve good accuracy with subsonic loads, the Savage 300 AAC project has been cancelled. Savage issued the following explanation:
Some time ago, Savage announced it would be chambering the Model 10 Precision Carbine in 300 AAC Blackout. Since that time, we have tested many variants of this cartridge in various barrel lengths and rates of twist. This exhaustive testing left us quite unsatisfied with the accuracy we were able to get from the subsonic loads in this chambering. Accuracy with the lighter, faster loads in this caliber was actually quite good. But we believe the real value in this cartridge lies in the use of subsonic loads for suppressed rifles. Therefore we have decided to scrap the project.
It is our understanding that pushing these heavy, slow bullets presents challenges not found in typical loadings and that our experience is not unique. Subsequently, many in the industry have simply adopted a lower standard for accuracy for these subsonic loads. While this does seem reasonable and we don’t criticize any in our industry that have taken this approach, it just won’t work for Savage.
Our brand was built on accuracy and we are too protective of our reputation for building the most accurate factory rifles available. We would rather walk away from this opportunity than sell a product that requires an explanation.
M5 ‘Knock-Down’ Power More Than Adequate for Big Game
Eurenco hopes to sell the plant to a Finnish company, and we are informed that at least one investment group from Finland is interested. Eurenco revealed no immediate plans to shut the facility or to curtail production while Eurenco seeks a buyer. However, Eurenco said that the primary reason for selling the plant was reduced military demand for Vihtavuori products in recent years.
The anti-hunting Center for Biological Diversity (CBD) and six other groups last week filed a lawsuit designed to pressure the Environmental Protection Agency (EPA) into banning traditional ammunition containing lead components. EPA has twice denied petitions filed by CBD to ban traditional ammunition, citing correctly that it does not have the authority to regulate ammunition under the Toxic Substances Control Act. If bullets with lead components are restricted, this would affect target shooters as well as hunters because nearly all match bullets employ a lead core.
Insulated Case Does Double-Duty
To learn more about how ambient temperature (and primer choice) affect pressures (and hence velocities) you should read the article 
Stan Ware of 
From Trashbin to Winner’s Circle
Why Does It Work?
Here’s good news for AR shooters looking for a 6mm option. 6mm HAGAR brass is now available from Hornady, and it looks like this brass is quite good. Those of you who follow the National Matches at Camp Perry know that Carl Bernosky won multiple National High Power Championships shooting the 6mm HAGAR cartridge from an AR Platform rifle. The 6mm HAGAR was derived from the 30 Remington cartridge, and it has the same case head diameter as the 6.8 SPC, also a 30 Remington derivative.
6mm HAGAR Basics
