Eric Stecker of Berger Bullets just revealed some details on Berger’s new 6mm 105gr Hybrid bullet. This projectile is now in the final stage of testing. Here are comparative ballistics for the new 6mm Hybrid vs. Berger’s popular 105gr VLD bullet:
6mm 105 gr Hybrid Target
Original 6mm 105 gr VLD (Now is Berger’s hunting version)
Averaged G1 BC = 0.547 G7 BC = 0.278
Averaged G1 BC = 0.532 G7 BC = 0.272
Longer Bullet Requires 1:8″ Twist
The new 105gr Hybrid Target is slightly longer than the original 105-grainer so a true 1:8″ is strongly recommended. The new bullet is made with the thicker Target jacket to withstand match shooting conditions. The Hybrid ogive is designed to be less sensitive to seating depth and has been working well in other calibers and sizes. This bullet can take all the 6mm cases can dish out and it has a BC equal to our own 6mm 115 gr VLD.
Eric Stecker tells us: “The moment we knew that we had to modify the 6mm 105gr VLD Target with a larger meplat, the need for this bullet was born. We’ve been working on it ever since. Bryan Litz has done an exceptional job with this design. I am very eager to see how they do in many rifles since I regard the 105gr class of bullets as key in Berger’s line. Between the 68gr, the 80gr and the 105gr (among other weights) we have been especially blessed with our 6mm offerings.” Eric is quite right — all those bullets shoot exceptionally well and the 105gr VLD holds many records. If the new 105gr Hybrid can come close to the accuracy of the 105gr VLD, it should be very successful.
Having completed successful field testing, Berger is releasing two new .30-caliber Hybrid bullets, the 185gr Hybrid (part #30424) and the new 200gr Hybrid (part # 30427). The Hybrid design, developed by Bryan Litz, combines both secant-ogive and tangent-ogive shapes. This keeps drag low while making the bullet easier to tune than typical VLD style bullets. Both these new Hybrid bullets have demonstrated excellent accuracy along with outstanding long-range ballistics. The BC on the 200-grainer is extremely high, with a G1 value of 0.624 and a G7 value of 0.320. The new 185gr and 200gr Hybrids should be arriving on store shelves very soon.
Berger 185gr and 200gr .308 Hybrid Specifications
Consumer Field Testing of new 6mm 105gr Hybrid, and Heavy 30s
Berger has commenced testing of its new 30 cal 215 and 230 gr Hybrid bullets, and Bergers new 6mm 105gr Hybrid. Berger tells us that: “If the tests results are positive, these bullets should be available to order in the middle of October, 2011.”
Berger is soliciting qualified AccurateShooter.com Forum members to help with the testing of the latest hybrids — the jumbo 30s and the new 6mm 105-grainer. You must have an appropriate rifle and be willing to report your results in a timely, coherent manner. In return, if selected, you’ll get a free bullets for testing — one 100-ct box per test. If you wish to participate in the testing process, click the links below to read Berger’s testing announcements in our Forum.
For its web customers, Creedmoor Sports is running a sale on Sierra Bullets and select Lapua cartridge brass. You can get 5% off a big 500-count box of Sierra Bullets, and save 10% on Lapua .260 Rem or .338 Lapua Magnum brass. Discounts are good through 11:59 pm, Sunday, August 28, 2011.
Sierra Bullets, 500-ct Box (Any Caliber)
Save 5% with Coupon Code BULLET 2011
Lapua Brass — Weekend Special through 8/28/2011
.260 Rem Brass, $87.95 — marked down from $96.95
.338 Lapua Mag Brass, $229.95 — marked down from $254.95
The National Shooting Sports Foundation (NSSF) reports that the USD value of U.S. quarterly imports of all sporting arms and ammunition declined 19% in the second quarter compared to the same period in 2010. From April to June, imports were $273 million, down from $337.1 million as reported in the same quarter last year. However, the decline was mostly due to a huge 42% drop in ammo imports. Imported long-gun sales (in USD value) have actually risen substantially. Sales of imported rifles rose 26.3%, from $27.1 million to $34.2 million.The shotgun category increased 23.4%, from $38.3 million to $47.2 million. The muzzleloader category posted a 7% increase, from $6 million to $6.5 million. Bucking the trend, handgun imports declined 13.1%, from $109.5 million to $95.1 million.
Imported Ammunition Sales Decline Dramatically
Over the past year, ammunition imports declined a whopping 42.2%, from $151.2 million (in Q2, 2010) to $87.4 million (in Q2, 2011). Moreover, the sales of imported shotgun shells fell 48.7%, from $5 million to $2.5 million. Apparently, now that there is a good supply of domestically-produced ammo, shooters are buying American again. Why has this occured? Currency fluctuations may be one reason. The declining value of the U.S. dollar, combined with rising shipping costs, have caused the price of imported ammo (and reloading components) to increase substantially in the past year. That has made domestic ammo more competitive price-wise. That is good news for U.S. ammo-makers. For additional research information and historical import data, visit nssf.org/research.
Now through the end of August, MidwayUSA is running an A-Max Bullet Sale, with 10% off Hornady’s popular A-Max polymer-tipped bullets. For example, 6mm (.243 Cal) 105gr BT A-Maxs are now just $19.79 per 100.
In addition, MidwayUSA is currently offering huge discounts on select “special buy” Speer hunting bullets. Here are some examples of the big savings (up to 60% off normal retail price) good through 9/4/2011:
Speer Hot-Cor Bullets 243 Caliber, 6mm 105gr Spitzer Box of 100, Product #312950 Sale Price: $10.99, Reg. $21.99 — Save $11.00
Speer Hot-Cor Bullets 264 Caliber, 6.5mm 140gr Spitzer Box of 100, Product #717893 Sale Price: $14.49, Reg. $28.99 — Save $14.50
Speer Hot-Cor Bullets 270 Caliber (277 Diameter) 150gr Spitzer Box of 100, Product #476459 Sale Price: $13.79, Reg. $22.99 — Save $9.20
Speer Hot-Cor Bullets 7mm (284 Diameter) 175gr Mag-Tip Box of 100, Product #621527 Sale Price: $19.79, Reg. $33.99 — Save $14.20
U.S. Senator Jim Inhofe (R, OK), successfully added an amendment to the committee-passed National Defense Authorization Act (NDAA) for Fiscal Year (FY) 2012, making military surplus previously-fired small arms cartridges available for commercial sale with certain restrictions. It also requires the U.S. Secretary of Defense to ensure compliance with managing commercial sale of spent ammunition.
Sen. Inhofe drafted this provision in response to the controversial destruction of once-fired military brass in recent years. Some military base commanders had arranged with ammunition manufacturers to have once-fired brass demilled and sold as scrap metal. However, the cartridges are worth far less as scrap metal than as reloadable ammo components. The U.S. Treasury was losing money since it was not recovering the full value of the cartridge brass in the surplus marketplace.
“My amendment provides a unique opportunity for the commercial sale of spent small arms cartridges,” said Inhofe. “This is beneficial from a cost saving standpoint. Having worked on this issue for some time, I am pleased to have made this progress. Those that care about Second Amendment Rights have put much effort into this as well.”
NRA-ILA Executive Director Chris W. Cox said, “It is common sense that serviceable and safe military spent brass cases are made available for commercial sale as military-sourced spent brass cases are of the calibers most widely used for marksmanship training and competition by civilians. In addition to being a revenue source for military bases, reloaded ammunition costs considerably less, and every gun owner and hunter can appreciate the savings during these tough economic times.”
Ultra-Long-Range Shooting by Bryan Litz
We recently did some extended long range shooting with several rifles at a “secret range” where we could shoot out to one mile. I teamed up with Paul Philips, a highly successful National and International F-TR shooter with several National records. We started out shooting a Sako TRG-42 at 1200 yards. This is the same rifle I shot in Wyoming last year at distances out to 2400 yards. This rifle shoots the new Berger 300gr Hybrids, at 2700 fps. We were pleased to find that the Nightforce NXS 5.5-22x56mm scope has plenty of elevation to get to 1200 yards with this bullet, especially when mounted on a Near Mfg. +45 MOA rail. The drop from a 100-yard zero to 1200 yards was predicted to be 34.75 MOA. The size of that 5-shot group was nothing to brag about (1.5 MOA), but what I found satisfying is that the group center was exactly centered for vertical on the target. That means the calculated .418 G7 BC and all of the other variables that went into this trajectory prediction were spot on.
New .30-Cal Tactical Bullets
Next, we shot the LaRue 7.62 OBR rifle at 1200 yards. This rifle produced a 5-shot group of 9.7″ (.85 MOA) with off-the-shelf Applied Ballistics Tactical ammo loaded with .30-cal 175gr Berger Tactical bullets. These bullets only have a muzzle velocity of 2572 fps from this short barrel, which means that in our conditions they were subsonic past 1000 yards, running 1080 fps at 1200 yard. Going subsonic didn’t prevent the 175gr bullets from shooting a sub-MOA group.
However, I was a little disappointed that the group center was 9″ high (0.8 MOA) compared to the predicted trajectory (657″ drop from a 100-yard zero). Note this 9″ error in predicted drop could be produced by small variances. The 9″ shift could be explained by a 14 fps error in muzzle velocity, or a 2% error in bullet BC, or a 5-yard error in range measurement.
For our final test, I shot Berger’s newest Tactical bullet; the .30-caliber 230gr OTM projectile. This bullet has a tested G7 BC of .368, and a G1 BC of .719. Now this isn’t my most accurate rifle and I haven’t had an opportunity to really work up a good load. As a result, I shot an unimpressive 20″ group (1.8 MOA). But the predicted drop was only off by 2″ (less than 1 click) based on the BC’s listed above.
Shooting .338 Lapua Magnums at One Mile
After shooting at 1200, we lobbed some bullets on an 8’x8′ target at 1760 yards (1 mile). At this range, the TRG-42 put the 300gr Bergers on target with four of five shots in 1/2 MOA with a flyer to make the total group 21″. At this range my group center was 18.5″ (1.1 MOA) higher than predicted. Paul Philips* shot his custom .338 Lapua Magnum rifle. This is a Dave Tooley-built Tac-338 with 30″ Brux barrel, Stiller action, McMillan A-5 stock, and Nightforce NXS 12-42×56. Paul shot at the same target and was able to hold between 1/2 and 1 MOA groups with the same 300gr Berger Hybrid bullets. Paul’s group centers were also about 1 MOA higher than predicted. This small error in prediction isn’t very troubling though, as we’re not entirely confident in the range measurement. As 1760 yards (one mile) is too far for a direct laser rangefinder measurement, the distance was determined with a combination of GPS and Google maps. At that distance, a range error of just 15 yards (out of 1760) could cause the percieved 1 MOA error in predicted drop. So, if the target were really at 1745 yards, instead of 1760 yards, it would explain why we were hitting 1 MOA high. Alternatively, if BC error were the reason for hitting high, it would suggest the G7 BC for the .338-cal 300gr Berger Hybrid is .427, as opposed to the currently advertised .418; a 2% difference.
The Joy of Ultra-Long-Range Shooting
For me, the thrill of shooting these extreme long ranges isn’t just about the group sizes, but the accuracy with which the trajectory can be predicted. The shooter who understands ballistics and inputs the right variables should be able to center a 1.5 MOA group well past 1000 yards. He can be more effective, on targets at extreme ranges, than someone who can shoot an 0.5 MOA group but can’t keep it centered. Of course the most impressive of all is the shooter who can combine precision with accuracy and center the 0.5 MOA group at extreme distances!
RCBS has launched a completely updated RCBS.com website. The new site features videos, a Step-by-Step Reloaders Guide, a Frequently Asked Questions (FAQ) section, a Glossary of Reloading Terms, a list of current Promotions and Rebates, a comprehensive parts inventory, plus all the RCBS product info you’d expect. Users can also download the 2011 RCBS Product Catalog. Along with its updated main site, RCBS has launched a companion reloading forum site, www.ReloaderHub.com. There you can post pictures and videos, share reloading recipes, and discuss reloading techniques.
Much good information is to be gleaned from the reloading videos available on RCBS.com. Hosted by RCBS Gen. Manager Allen Jernigan, these clips cover important reloading procedures, such as case prep, cartridge priming, and how to measure case run-out (eccentricity). Click the image below to go to the RCBS Video Archive.
MidwayUSA is running a major sale on blemished bullets right now. The sale price for some of these “blems” is HALF what the bullets normally cost. For most varieties, you’ll save at least 40% off regular retail. With blemished bullets, there are normally no functional defects that degrade accuracy or performance. However, the jackets may be tarnished or have water spots, or other appearance problems. Below are some of the varieties on sale. Match shooters should check these deals: 6mm 105gr BTs for $14.09/100, and 6.5mm 140gr tipped BTs, for $20.59/100.
.243 Caliber, 6mm (.243 Diam.) 105gr HPBT Match, Box of 100
Product #146046
Reg Price: $23.49
Sale Price: $14.09 — Save $9.40
.243 Caliber, 6mm (243 Diam.) 95gr Poly-Tip Spitzer BT, Box of 100
Product #468298
Reg Price: $28.49
Sale Price: $14.19 — Save $14.30
..264 Caliber, 6.5mm (.264 Diam.) 140gr Poly-Tipped BT Match, Box of 100
Product #174000
Reg Price: $29.49
Sale Price: $20.59 — Save $8.90
.284 Caliber, 7mm (.284 Diam.) 162gr Polymer Tip Spitzer BT, Box of 100
Product #850675
Reg Price: $30.99
Sales Price: $21.69 — Save $9.30
.284 Caliber, 7mm (.284 Diam.) 139gr Expanding BT, Lead-Free Box of 50
Product #181752
Reg Price: $31.99
Sale Price: $15.99 — Save $16.00
.270 Caliber (.277 Diam.) 130gr Bonded Spitzer BT with Cannelure, Box of 100
Product #850233
Reg Price: $46.49
Sale Price: $23.19 — Save $23.30
.30 Caliber (.308 Diam.) 180 Grain Bonded Spitzer Boat Tail, Box of 100
Product #515690
Reg Price: $50.99
Sale Price: $25.49 — Save $25.50
With top-quality cartridge brass approaching $1.00 per case, it’s more important than ever to get maximum life from your match brass. Annealing can extend the useful life of your brass, and ultrasonic cleaning allows you to eliminate carbon build-up inside cases that have been fired numerous times. You can certainly do annealing and ultrasonic cleaning yourself, but to get the best (and most consistent) results, you’ll need to invest in quality equipment and spend a good deal of time and effort learning how to use it properly. Likewise, turning case necks requires expensive tools, and it takes time and practice before you’ll get perfectly-turned necks.
DJs Brass Offers Annealing, Cleaning, and Neck-Turning
If you don’t have the resources to purchase annealing and ultrasonic cleaning machines, or if you don’t have the time to neck-turn hundreds of cases — don’t fret, there is an affordable option. DJsBrass.com, run by benchrest shooter Darrell Jones, offers annealing, ultrasonic cleaning, neck-turning, and complete brass prep services (including OAL trimming) at very reasonable rates. Darrell will anneal 100 cases for $15, and he’ll neck-turn your cases (any caliber), starting at $30.00 per hundred. Even if you’re a skilled neck-turner, if you just acquired a new caliber, it might make sense to send the work to Darrell, instead of purchasing new expander mandrels and turning arbors.
False-Shoulder Forming for Wildcats
Do you shoot an “improved” short-necked wildcat like the 6mm Dasher? Want your fire-forming to go without a hitch? Darrell can take your parent brass and create a false shoulder so you get a good crush fit in the chamber. If you’re running a tight-necked chamber he can create a false shoulder AND turn the top half of the neck to fit your chamber.
Video Shows Annealing Process
In the video below, Darrell explains the wide variety of brass restoration services he offers. Darrell says he can “bring your brass back to life” and we have found that to be true. We had some 6mmBR brass with no-turn necks that started to lose their “competitive edge” after just 7-8 loadings. The neck tension had become inconsistent from case to case, and bullet seating force (measured with a gauge-equipped K&M arbor press) varied widely. We were seeing unexplained flyers, and ES had nearly doubled compared to when the brass was fresh. Annealing the cases really made a difference. The neck tension was much more consistent and bullets seated more uniformly with less “spiking” of seating force. Paying $15 for annealing is a lot cheaper than buying a new box of brass for $80.00 or more!
Darrell offers a variety of services at affordable rates. To order work by Darrell, visit DJsBrass.com, or call (205) 461-4680:
Case Annealing Only
Cost: $15.00/100 for standard cases; $20.00/100 for magnum cases.*
Combination Service (Cleaning and Annealing)
Ultrasonic Cleaning, Check for split necks, Anneal case necks.
Cost: Starting at $20.00/100 standard and $25.00/100 for magnum cases.*
Full Service (Case Prep, Cleaning, Annealing)
Uniform primer pockets, Chamfer, Ultrasonic cleaning/polishing, Anneal case necks.
Cost: Starting at $30.00/100 and up.*
Neck Turning or Trim-to-Length Custom Order Service
Cost: Starting at $30.00/100 for standard cases.*
(Darrell can also resize necks or false shoulder your cases. Call for quotes.)
*Add USPS flat-rate return shipping. Call (205) 461-4680 for quotes on miscellaneous, military bulk brass or high volume discount. Note: Prices subject to change.