OK guys, you probably want to keep this page confidential. Your spouse probably doesn’t want to be reminded about all the times you ignored the “Honey Do” list and headed off to the range instead. And she certainly doesn’t want to know how much you spend every year on your gun hobby.
Answer these two polls to see how dedicated (or should we say “obsessed”) a gun guy you really are. Once you vote you can see how your shooting (and spending) habits compare to other readers. Full results display after you select an answer and click the “Vote” button.
Click to vote in our current Readers’ polls.
Click “View Results” to see what other readers have selected.
The rifle cartridge money clip was a real product from ReleaseMeCreations.com (now sold out). You can, of course, make your own cartridge money clip with a Dremel tool for free.
At the request of our readers, we provide select “Deals of the Week”. Every Sunday afternoon or Monday morning we offer our Best Bargain selections. Here are some of the best deals on firearms, hardware, reloading components, optics, and shooting accessories. Be aware that sale prices are subject to change, and once clearance inventory is sold, it’s gone for good. You snooze you lose.
NOTE: All listed products are for sale to persons 18 years of age or older. No products are intended for use by minors.
1. Creedmoor Sports — American Bullet Company Sale
⏺ Great deals on .224 and .308 bullets for training
Creedmoor Sports offers American Bullet Company bullets, made in the USA by major manufacturers. The “practice” bullets are factory seconds, sold at very attractive prices– up to 50% compared to first-run offerings. You may want to sort these practice bullets by weight and/or base-to ogive measurement. We think these are a good choice for M1 Garand, M1A, and 1903 Springfield shooters running .30-06 or .308 Win chamberings. And the .224 Cal 77gr Practice bullets are excellent for service rifle shooters. NOTE: There are also first-run (non-blem) 155gr and 175gr .308 Caliber “Match” Bullets on sale.
⏺ Excellent, rugged rifle case at a very good price
When flying or driving it’s vital to protect your rifles. A good hard case option (at a great price) is the APACHE 9800 Weatherproof Protective Rifle Case. On sale for $149.99, this 53″-long case is $190.00 less than an equivalent-size Pelican case. Constructed from durable polypropylene, this quality hard case can protect long guns from from impact, moisture, and dust. The built-in purge valve equalizes pressure so you can open the case after changing elevations. NOTE: Case interior dimensions are 50⅜” by 13⅝”.
3. Grafs.com — Frankford Arsenal F-1 Press, $103.99
⏺ Versatile press, good primer exit, plus built-in light
Here’s a handy, single-stage press with some cool features. The Frankford Arsenal F-1 press has an open front for easy case placement, plus a built-in LED lamp at the top. And after decapping, spent primers go straight down a tube into a handy, clear, twist-off catch cylinder (as on a Forster Co-Ax). We think this would be an excellent secondary press used for decapping or bullet seating. Priced at just $103.99 at Graf & Sons — this press is a GREAT deal, but act quick, supplies are limited. NOTE: This press does NOT have primer seating capability — you must prime cases with a separate tool. Also, the power cord for the LED light is NOT included. CLICK HERE for full Frankford Arsenal F-1 Press Review.
4. CDNN Sports — Winchester .22 LR Wildcat, $193.67
⏺ Fun rimfire rifle complete with optic — good owner reviews
Here’s a fun semi-auto .22 LR rifle at a crazy low price — $193.67 complete with a mounted Red Dot Reflex optic. That’s a steal for a reliable rimfire rig for plinking and NRL22 matches. The Winchester Wildcat takes Ruger 10/22 mags, and has some great features, such as field-removable lower receiver, ambidextrous controls, integral Picatinny rail, and rear barrel access. It has a good trigger and shoots well. In many respects the Wildcat beats the Ruger 10/22 while costing a lot less. If you don’t need the optic, you can get a basic Wildcat for $179.99 with Strata camo stock or $157.66 with OD Green stock.
5. Natchez — Norma TAC-22 .22LR Ammo, 50 rounds, $3.49
⏺ Very good .22 LR ammo at extremely low price — GREAT VALUE
If you love .22 LR rimfires and want quality ammo at an ultra-low price, grab some Norma TAC-22. At $3.49 for 50 rounds, this is a true bargain, yet the TAC-22 is good enough for NRL22 matches as well as fun target shooting. We’ve shot this Norma ammo and been very satisfied. You’ll be hard-pressed to find better .22 LR ammo at anywhere near this price. Don’t delay ordering — at this price, we expect this TAC-22 ammo will sell out soon. NOTE: On the Natchez website there is a reference to $0.17 per round. That is a TYPO. You get 50 rounds for $3.49, which works out to SEVEN cents per round ($0.0698 to be exact).
6. Amazon — Midland-EX37VP Radio Kit (Set of 2), $49.99
⏺ Quality Walkie-Talkies with good range and special Emergency functions
Having a good 2-way communication system is vital when hunting or wilderness hiking. And a pair of walkie-talkies really helps during shooting practices when a buddy goes downrange to set targets. A very good 2-Way radio system is the Midland-EX37VP E+Ready Emergency Two-Way Radio Kit (#ad). These walkie-talkies have a 26 mile range and feature 22 FRS (Family Radio Service) channels, along with channel scan. With this kit you get vital E+Ready Emergency functionality, plus NOAA weather alerts — important in the event of a natural disaster.
7. Amazon — Caldwell AR-500 Steel Targets, starting at $14.92
⏺ Great deals on durable AR500 steel targets — watch video below right
Caldwell’s bright, easy-to-see steel targets come in multiple shapes and sizes for competition, training, and recreational use. Made of AR-500 grade hardened steel, these bright yellow targets can withstand thousands of rounds. Rated up to a 3000 fps impact velocity and a 3500 ft-lb impact energy, these targets come in seven styles and sizes with three hanging solutions. These bright yellow Caldwell AR500 Steel Targets (#ad) are on sale now on Amazon, starting at just $14.92 for the 5″ Gong Target.
8. Amazon — Deyace Extra Large Shooting Mat, $37.99
⏺ Nice, relatively big shooting mat with good padding
When shooting prone, you need a good shooting mat. The Deyace Extra Large padded shooting mat (#ad) is a great value for just $37.99. Measuring a generous 78″x28.5″, this XL mat has nice padding for elbows and knees, and the mat folds up nicely for transport. This mat is offered in four colors: Green, Tan, Tan Camo, and Black. For transport, we like this mat’s integral straps and carry handle.
How many times have you grabbed your electronic earmuffs only to find the batteries are dead. To avoid the hassles (and cost) of battery replacement, consider Walker’s Rechargeable Razor Ear Muffs (#ad). These rechargeable muffs have an estimated 80 hours of run time. That’s enough to get through several DAYS at the range. Then you can recharge the muffs conveniently at home or in your vehicle. To hear range commands clearly, the muffs have HD speakers. Plus there’s a handy audio jack. These muffs are comfortable and boast a 21 dB Noise Reduction Rating (NRR).
10. Amazon — 6 Inch Calipers w/ Extra Large Screen, $29.98
⏺ Big screen is a big plus with these Digital Calipers
Every handloader can use a good set of digital calipers (#ad). With an extra large, high-contrast LCD display, these Jiavarry digital calipers show bigger numbers that are easier to read. That help ensure you don’t make mistakes. These calipers have a good Lithium battery and offer ample 0-6 inch (0-150mm) measuring range with ±0.02 mm/0.001″ resolution.
As an Amazon affiliate, this site can earn revenues through sales commissions.
Here’a useful article by Sierra Bullets Media Relations Manager Carroll Pilant. This story, which originally appeared in the Sierra Bullets Blog, covers some of the more common ammo problems that afflict hand-loaders. Some of those issues are: excessive OAL, high primers, and improperly-sized cases. Here Mr. Pilant explains how to avoid these common problems that lead to “headaches at the range.
I had some gentlemen at my house last fall getting rifle zeros for an upcoming elk hunt. One was using one of the .300 short mags and every 3rd or 4th round would not chamber. Examination of the case showed a bulge right at the body/shoulder junction. These were new cases he had loaded for this trip. The seating die had been screwed down until it just touched the shoulder and then backed up just slightly. Some of the cases were apparently slightly longer from the base to the datum line and the shoulder was hitting inside the seating die and putting the bulge on the shoulder. I got to thinking about all the gun malfunctions that I see each week at matches and the biggest percentage stem from improper handloading techniques.
One: Check Your Cases with a Chamber Gage
Since I shoot a lot of 3-gun matches, I see a lot of AR problems which result in the shooter banging the butt stock on the ground or nearest solid object while pulling on the charging handle at the same time. I like my rifles too well to treat them that way (I cringe every time I see someone doing that). When I ask them if they ran the ammo through a chamber gage, I usually get the answer, “No, but I need to get one” or “I didn’t have time to do it” or other excuses. The few minutes it takes to check your ammo can mean the difference between a nightmare and a smooth running firearm.
A Chamber Gauge Quickly Reveals Long or Short Cases
Size Your Cases Properly
Another problem is caused sizing the case itself. If you will lube the inside of the neck, the expander ball will come out a lot easier. If you hear a squeak as the expander ball comes out of a case neck, that expander ball is trying to pull the case neck/shoulder up (sometimes several thousandths). That is enough that if you don’t put a bulge on the shoulder when seating the bullet … it can still jam into the chamber like a big cork. If the rifle is set up correctly, the gun will not go into battery and won’t fire but the round is jammed into the chamber where it won’t extract and they are back to banging it on the ground again (with a loaded round stuck in the chamber). A chamber gage would have caught this also.
Oversizing cases also causes problems because the firing pin doesn’t have the length to reach the primer solid enough to ignite it 100% of the time. When you have one that is oversized, you usually have a bunch, since you usually do several cases at a time on that die setting. If the die isn’t readjusted, the problem will continue on the next batch of cases also. They will either not fire at all or you will have a lot of misfires. In a bolt action, a lot of time the extractor will hold the case against the face of the breech enough that it will fire. The case gets driven forward and the thinner part of the brass expands, holding to the chamber wall and the thicker part of the case doesn’t expand as much and stretches back to the bolt face. If it doesn’t separate that time, it will the next time. When it does separate, it leaves the front portion of the case in the chamber and pulls the case head off. Then when it tries to chamber the next round, you have a nasty jam. Quite often range brass is the culprit of this because you never know how many times it has been fired/sized and in what firearm. Back to beating it on the ground again till you figure out that you have to get the forward part of the case out.
Just a quick tip — To extract the partial case, an oversized brush on a cleaning rod [inserted] and then pulled backward will often remove the case. The bristles when pushed forward and then pulled back act like barbs inside the case. If you have a bunch of oversized case that have been fired, I would dispose of them to keep from having future problems. There are a few tricks you can use to salvage them if they haven’t been fired though. Once again, a case gage would have helped.
Two: Double Check Your Primers
Another thing I see fairly often is a high primer, backwards primer, or no primer at all. The high primers are bad because you can have either a slam fire or a misfire from the firing pin seating the primer but using up its energy doing so. So, as a precaution to make sure my rifle ammo will work 100% of the time, I check it in a case gage, then put it in an ammo box with the primer up and when the box is full, I run my finger across all the primers to make sure they are all seated to the correct depth and you can visually check to make sure none are in backwards or missing.
Three: Check Your Overall Cartridge Length
Trying to load the ammo as long as possible can cause problems also. Be sure to leave yourself enough clearance between the tip of the bullet and the front of the magazine where the rounds will feed up 100%. Several times over the years, I have heard of hunters getting their rifle ready for a hunt. When they would go to the range to sight in, they loaded each round single shot without putting any ammo in the magazine. On getting to elk or deer camp, they find out the ammo is to long to fit in the magazine. At least they have a single shot, it could be worse. I have had hunters that their buddies loaded the ammo for them and then met them in hunting camp only to find out the ammo wouldn’t chamber from either the bullet seated to long or the case sized improperly, then they just have a club.
Four: Confirm All Cases Contain Powder
No powder in the case doesn’t seem to happen as much in rifle cartridges as in handgun cartridges. This is probably due to more handgun ammo being loaded on progressive presses and usually in larger quantities. There are probably more rifle cartridges that don’t have powder in them than you realize though. Since the pistol case is so much smaller internal capacity, when you try to fire it without powder, it usually dislodges the bullet just enough to stick in the barrel. On a rifle, you have more internal capacity and usually a better grip on the bullet, since it is smaller diameter and longer bearing surface. Like on a .223, often a case without powder won’t dislodge the bullet out of the case and just gets ejected from the rifle, thinking it was a bad primer or some little quirk.
For rifle cases loaded on a single stage press, I put them in a reloading block and always dump my powder in a certain order. Then I do a visual inspection and any case that the powder doesn’t look the same level as the rest, I pull it and the one I charged before and the one I charged after it. I inspect the one case to see if there is anything visual inside. Then I recharge all 3 cases. That way if a case had powder hang up and dump in the next case, you have corrected the problem.
On progressive presses, I try to use a powder that fills the case up to about the base of the bullet. That way you can usually see the powder as the shell rotates and if you might have dumped a partial or double charge, you will notice as you start to seat the bullet if not before. On a progressive, if I don’t load a cartridge in one smooth stroke (say a bullet tipped over sideways and I raised the ram slightly to reset it) Some presses actually back the charge back adding more powder if it has already dumped some so you have a full charge plus a partial charge. When I don’t complete the procedure with one stroke, I pull the case that just had powder dumped into it and check the powder charge or just dump the powder back into the measure and run the case through later.
Want to learn more about Long Range Shooting? Check out the NSFF “Elements of Long Range Shooting” videos hosted by ballistics guru Bryan Litz of Applied Ballistics. In this multi-part series, Bryan covers a variety of topics of interest to precision shooters. For today’s Saturday at the Movies special, we feature seven of Bryan’s videos. Watch other informative Long Range Shooting and Ballistics videos with Bryan Litz on the NSSF YouTube Channel.
Atmospherics and Density Altitude
Bryan Litz explains: “An important element in calculating an accurate firing solution for long-range shooting is understanding the effects of atmospherics on a projectile.” Atmospherics include air pressure, air temperature, and humidity. Bryan notes: “Temperature, pressure, and humidity all affect the air density… that the bullet is flying through. You can combine all those factors into one variable called ‘Density Altitude’.” Density Altitude is used by the ballistic solver to account for variables that affect bullet flight.
Bullet Ballistic Coefficients
A bullet’s ballistic coefficient (BC) basically expresses how well the bullet flies through the air. Higher BC bullets have less aerodynamic drag than lower BC projectiles. You will see BCs listed as either G1 and G7 numbers. These correspond to different bullet shape models. Generally speaking, the G7 model works better for the long, boat-tail bullets used for long-range shooting. Notably, a bullet’s drag is NOT constant in flight. The true BC can vary over the course of the trajectory as the bullet velocity degrades. In other words, “BC is dynamic”. That said, you can make very accurate drop charts using the BCs provided by major bullet-makers, as plugged into solvers. However, long-range competitors may want to record “real world” drop numbers at various distances. For example, we’ve seen trajectories be higher than predicted at 500 yards, yet lower than predicted at 1000.
Transonic Range
When considering your rifle’s long-range performance, you need to understand the limit of your bullet’s supersonic range. As the bullet slows below the speed of sound, it enters the transonic zone. This can be accompanied by variations in stability as well as BC changes. Bryan explains “once your bullet slows done below supersonic and you get into transonic effects, there are a lot more considerations that come into play. The drag of the bullet becomes less certain, the stability of the bullet can be challenged, and things related to long times of flight, such as Coriolis and Spin Drift, come into play. So whenever you are shooting long range you need to where your bullet slows down to about 1340 fps.”
Ballistics Solvers — Many Options
Bryan Litz observes: “When we talk about the elements of long range shooting, obviously a very important element is a getting a fire solution, using a ballistic solver. There are a lot of ballistic solvers out there… Applied Ballistics has smartphone Apps. Applied Ballistics has integrated the ballistic solver directly into a Kestral, and the same solver runs (manually) on the Accuracy Solutions Wiz-Wheel. The point is, if it is an Applied Ballistics device it is running the same solutions across the board.”
Bullet Stability and Twist Rates
In this video, Bryan Litz talks about bullet in-flight stability and how to calculate barrel twist-rate requirements for long-range bullets. Bryan explains that bullet stability (for conventional projectiles) is basically provided by the spinning of the bullet. But this spin rate is a function of BOTH the nominal twist rate of the barrel AND the velocity of the projectile. Thus, when shooting the same bullet, a very high-speed cartridge may work with a slower barrel twist rate than is required for a lower-speed (less powerful) cartridge. For match bullets, shot at ranges to 1000 yards and beyond, Bryan recommends a twist rate that offers good stability.
Scope Tracking — Tall Target Test
Have you recently purchased a new scope? Then you should verify the actual click value of the turrets before you use the optic in competition. While a scope may have listed click values of 1/4-MOA, 1/8-MOA or 0.1 Mils, the reality may be slightly different. Many scopes have actual click values that are slightly higher or lower than the value claimed by the manufacturer. The small variance adds up when you click through a wide range of elevation. In this video, Bryan Litz shows how to verify your true click values using a “Tall Target Test”. The idea is to start at the bottom end of a vertical line, and then click up 30 MOA or so. Multiply the number of clicked MOA by 1.047 to get the claimed value in inches. For example, at 100 yards, 30 MOA is exactly 31.41 inches. Then measure the difference in your actual point of impact.
Coriolis Effect
The Coriolis Effect comes into play with extreme long-range shots. The rotation of the earth actually moves the target a small distance (in space) during the long duration of the bullet’s flight. Bryan Litz notes that, in most common shooting situations inside 1K, Coriolis is not significant. At 1000 yards, the Effect represents less than one click (for most cartridge types). Even well past 1000 yards, in windy conditions, the Coriolis Effect may well be “lost in the noise”. But in very calm conditions, when shooting at extreme ranges, Bryan says you can benefit from adjusting your ballistics solution for Coriolis: “The Coriolis Effect… has to do with the spin of the earth. The consequence of that is that, if the flight time of the bullet gets significantly long, the bullet can have an apparent drift from its intended target. The amount [of apparent drift] is very small — it depends on your latitude and azimuth of fire on the planet.”
About Bryan Litz
Bryan began his career as a rocket scientist, quite literally. He then started Applied Ballistics, the leading company focusing on ballistics science for rifle shooting. A past F-TR Long-Range National Champion and Chief Ballistician for Berger Bullets, knows his stuff. His Applied Ballistics squad was the winning team at the 2017 King of 2 Miles event, and Applied Ballistics has earned major U.S. defense contracts.
The U.S. Army Marksmanship Unit (USAMU) published a series of reloading articles on its Facebook Page. In this article, the second in a 3-part series, the USAMU covers the process of loading competition pistol ammunition. The authors focus on two key elements — the taper crimp and the quality/uniformity of the original brass. If you shoot pistol competitively, or just want to maximize the accuracy of your handguns, read this article. The taper crimp tips are very important.
Loading Accurate Competition Pistol Ammunition — Part 2 of 3
Today, we resume our series on factors affecting accuracy in pistol handloads. Readers who missed Part One can visit our USAMU Facebook Page. [To read the first article in the series, search for March 28, 2018 to find that first installment, which is definitely worth reading.]
One often-overlooked aspect of handloading highly-accurate pistol ammunition is the amount of taper crimp used, and its effect on accuracy. (NOTE: this article pertains to loading for semi-autos – revolver crimp techniques involve some quite different issues.) Briefly, different amounts of taper crimp are used with various handloads to obtain best accuracy. The amount is based on bullet weight, powder burn rate and charge, plus other factors such as case neck tension. During machine-rest testing of experimental Service Pistol ammunition, many variables are examined. Among these, our Shop often varies a load’s crimp in degrees of 0.001″ when re-testing for finest accuracy.
How to Measure Taper Crimp on Pistol Cartridges
One question that often arises is, “How do I measure the taper crimp I’m putting on my cartridges?” Using the narrow part of one’s dial caliper jaws, carefully measure the case diameter at the exact edge of the case mouth on a loaded cartridge. It’s important to take several measurements to ensure consistency. Also, be sure to measure at several places around the case mouth, as case wall thickness can vary. After measuring 2-3 cartridges with a given crimp setting, one can be confident of the true dimension and that it can be repeated later, if needed.
However, for good results, one must use brass from one maker due to variances in case wall thickness. For example, the same degree of crimp that imparts a measurement of 0.471″ with Brand X brass may result in 0.469″ with Brand Y. Thus, for best accuracy, using brass from the same manufacturer is important — particularly for 50-yard Slow Fire. In a perfect world, it is better still to use brass from one lot number if possible. With the popularity of progressive presses using interchangeable tool heads, keeping separate tool heads adjusted for each load helps maximize uniformity between ammunition lots.
Brass Uniformity and Accuracy
Brass is important to pistol accuracy. While accurate ammunition can be loaded using brass of mixed parentage, that is not conducive to finest results, particularly at 50 yards. It is important for the serious competitor to pay attention to his brass – even if only for the 50-yard “Slow Fire” portions of “Bullseye” matches and practice. By segregating brass as described above, and additionally keeping track of the number of times a given batch of cases has been fired, one can ensure case neck tension and case length are at their most uniform.
Given the large volumes of ammunition consumed by active pistol competitors, using inexpensive, mixed surplus brass for practice, particularly at the “short line” (25 yards), is understandable. In NRA Outdoor Pistol (“Bullseye”), the 10-ring is relatively generous — especially for a well-trained shooter with an accurate pistol and load. However, for the “long line” (50 yards), purchasing and segregating a lot of high-quality brass to be used strictly for slow-fire is a wise idea. To keep track of your brass on the line, use a unique headstamp marking with 1 or 2 colors of marking pen ink.
Uniform Cartridge Overall Length is Important
Cartridge case Overall Length (OAL) uniformity as it comes from the factory is important to achieving utmost accuracy. More uniform case lengths (best measured after sizing) contribute to greater consistency of crimp, neck tension, ignition/burn of powder charge, headspace (rimless cartridges), etc. Cartridge case-length consistency varies noticeably by maker and, with lesser manufacturers, also from lot to lot. Some manufacturers are more consistent in their dimensions than others, and also in the hardness/ductility of their brass. Similarly, pay attention to primer brands, powder lot numbers, etc.
Consider Using a Lock-Out Die with Progressive Presses
When reloading pistol ammo with a Progressive press, we strongly recommend the use of a lock-out die, or other system that can detect double charges or low charges. If your progressive is manually advanced, the possibility of a double charge is very real — and that can have disastrous consequences.
On UltimateReloader.com website you’ll find an excellent two-part series on the function and set-up of the RCBS Lock-Out Die. This die prevents loading if a high or low powder charge is detected. The video above shows setup of the RCBS Lock-Out Die on the Dillon XL-650 progressive press.
Have inflation (and supply chain shortages) affected the price of powder? You bet. Probably WAY more than you could imagine. Forum member “Two Time HM LR” posted this interesting photo (above) showing Hodgdon powder prices from 1978, as sold by O.K. Weber in Oregon.
Now the prices — $20 to $44 — may not get your attention at first. But take note that these numbers are for EIGHT pound jugs. Yep eight-pounders were all under $45! For example, H4895 was $44 for 8 pounds back in 1978, 45 years ago. And H335 was $20 for eight pounds — that’s just $2.50 per pound!
These days a single pound of a desirable powder such as H4831 might cost $65 at some stores IF you can find it at all. On Hodgdon’s web site, H4831 powder is priced at $58.99 per pound in October 2023. Using that current $58.99/lb figure, H4831 is now nearly ELEVEN times higher than it was in 1978, when H4831 cost $44 for 8 pounds, i.e. $5.50 per pound.
Here are some comments from our Forum Members:
“Heck those prices are just about the same as current ones, just a little smaller container now.” — Joe
“I’ve got some H4831 in a can marked ‘WWII Surplus Powder’ with a price tag of $2.75. We’ll never see that again either.” Rick in Oregon
“1978 prices and [2024] income would be nice. Unfortunately that doesn’t work. If you compare prices and income, powder cost about the same. You also have to discount the temporary gouging that we are seeing.” — Tmwinds
“So I used to buy gas for 10 cents per gallon and they’d pump it, check the oil, and clean the windshield.” — Pirate Ammo
One comment suggests that the powder price hike actually tracks general U.S. currency inflation over the last four decades. So perhaps powder price increases are not as bad as they seem, when compared to how all prices have risen since 1978:
“Using H4895 [8 lbs.] as a comparison basis at $58.50 (list price) in 1978 calculates it to $276 in today’s money. Looking at … prices it looks like around [$380] for the same item in today’s money, so it really hasn’t gone up [that much as corrected for inflation]. Availability is another issue though and if someone is really needing powder they may well have to pay above suggested retail.” — Drover
With good factory rifle ammo costing $1.30 per round or more — a Laser BoreSighter could pay for itself in just a couple range sessions.
Laser BoreSighters — fitted to your chamber — help you get on target more quickly, particularly with factory firearms. Just activate the unit, slip it into the chamber and look for the red dot on the target. The laser dot is about 2″ in diameter at 100 yards, and is visible even in full sunlight. Right now you can get HQ Issue Sight-Rite BoreSighters starting at $19.99 at Sportsman’s Guide (member price is $17.99). These units have a durable brass metal body and the battery will run an hour.
Rifle and Shotgun Cartridge Types:
Sight-Rite Boresighters are offered for popular rifle and shotgun cartridge types including: .17 HMR, .22 LR, .223 Rem, .204 Ruger, .22-250, 6.5 Creedmoor, 7mm WSM, .30-30, 20 Gauge shotshell, 12 Gauge Shotshell. Sportsman’s Guide also offers Sightmark Pistol Laser BoreSighters for $26.99: .38 SPL/.357 Mag, 9mm, .40 SW, .44 Magnum, .45 ACP.
Amazon offers MidTen Laser Boresighters complete with 6 batteries (two sets). This runs $17.99 for the .223 Rem cartridge while a larger boresighter for .25-06/.270 Win/.30-06 Boresighter is $19.89.
In-chamber BoreSighters are much safer than the kind that you insert in the end of the barrel (or attach to muzzle). If you forget your laser bore-sight placed in the end of the barrel, and then fire a round, you can blow up your barrel and/or suffer serious injury — it HAS happened.
This video shows how to use in-chamber Sightmark laser boresighters. The HQ Issue Sight-Rite XSI boresighters work the same way:
Here is a clever DIY tool we learned about from Frank Shuster, a Forum member, who, sadly, passed away in 2015. Frank was a very knowledgeable shooter who was always willing to help others. Here is one of Frank’s smart inventions. He devised a way to measure the length of a rifle’s chamber using a fired cartridge case. Frank’s system works by cutting a “collar” from part of the case neck. This then slips over a bullet seated in a case loaded without powder or primer. As you chamber the dummy round, the collar will move back to indicate the full length of the chamber. (Make sure the bullet is seated well off the lands so the dummy round can chamber fully.)
The pictured gauge can be home made (for free) with components you already have on hand. Frank explained: “I used a Dremel cut-off wheel to cut the front half of the case neck off. A jewelers needle file to de-burr both rough-cut edges. The cut-off surface does not need to be perfectly square, because you are using the original straight mouth to make contact at the front of the chamber. Seat any old bullet to the approximate normal seating length. Next apply a tiny drop of oil on the ogive of the bullet, and slide the ‘collar’ over the bullet. Then chamber the dummy round and close the bolt. Extract the round slowly and carefully and take the measurement with calipers (see top photo).”
Frank’s DIY chamber length gauge works well. In a related Shooters’ Forum thread, Frank posted: “I’ve compared length dimensions doing it this way and with the chamber length shown on my chambering reamer drawings, and the Sinclair gauge, and they are all within .001″ or so.”
Commercial Chamber Length Gauges May Not Work with Custom Chambers
Frank did use Sinclair chamber-length gauges for some applications. These bullet-shaped gauges slip into a cartridge, but “it’s inconvenient to order that little gauge only… without spending $6 shipping for a $7 item.” Moreover, the Sinclair gauges may not fit a custom chamber with a tighter neck dimension because the diameter of the ring at the end is too large.
As an alternative to commercial gauges, the collar-type, homemade gauge will function properly in a custom chamber. The homemade gauge will work with smaller-than-standard chamber neck dimensions, as long as you use a piece of appropriately-turned fired brass that fits your chamber.
If you hand-load pistol ammunition, you should definitely have a case gauge (aka “gage”) for each cartridge type you reload. Caliber-specific, precision-machined cylindrical gauges perform many important functions. They will instantly reveal if your rounds are too long or have excessive headspace. They will also show if your case is bulged or otherwise too fat to chamber easily. You can use the gauge with sized brass as well as loaded rounds.
Case gauges are a “must-have” for anyone loading handgun ammunition, particularly if you crank out large quantities of pistol ammo with a progressive press. An oversize round can cause a misfeed, jam, or other problem. That can ruin your day if you are in the middle of a shooting match. If you are relying on your handgun for self-defense, the last thing you want is a malfunction of any kind. This Editor personally runs every pistol round through a gauge before it goes into the ammo box.
UltimateReloader.com Video Shows How to Use Pistol Case Gauges:
Our friend Gavin Gear of UltimateReloader.com has prepared an excellent video that explains the benefits of pistol case gauges and shows how to use them. Gavin uses the quality gages produced by L.E. Wilson. These are available for the most popular handgun cartridges, both autoloader cartridges, and rimmed revolver cartridges. Gavin demonstrates gage use with .40 SW and .44 magnum cases.
Gavin states: “Using a case gage is very simple, and I would recommend that you add one of these gages to your reloader’s tool chest for each of the pistol cartridge types you reload. It may just save you a lot of time and hassle. Peace of mind is hard to put a price on!”
At the request of our readers, we provide select “Deals of the Week”. Every Sunday afternoon or Monday morning we offer our Best Bargain selections. Here are some of the best deals on firearms, hardware, reloading components, optics, and shooting accessories. Be aware that sale prices are subject to change, and once clearance inventory is sold, it’s gone for good. You snooze you lose.
NOTE: All listed products are for sale to persons 18 years of age or older. No products are intended for use by minors.
1. Powder Valley — Sale on Popular Powders
⏺ High demand powders are IN STOCK now at very competitive prices
Powder Valley is a great vendor for reloading supplies. And right now Powder Valley has popular Hodgdon, Accurate, Alliant, and Vihtavuori powders in stock, plus other brands. Need Varget, H4350, H4831sc, Reloder 16, or Vihtavuori N133 or N550? Then head over to PowderValley.com to get savings up to 20%.
2. Palmetto SA — AR-15 Lower with Magpul Stock, $119.99
⏺ Great price on complete AR lower with trigger and adjustable stock
This is the lowest price we’ve seen for a name-brand AR-15 platform complete lower with a quality MagPul adjustable stock. If you are building an AR for varminting, 3-Gun, or home defense, check out this Palmetto sale. Get the Flat Dark Earth (FDE) Magpul MOE lower for just $119.99, a whopping $280 off the $399.99 list price. Or for the same $119.99 price get the Olive Drab Green (ODG) version or the Dark Grey version. All these lowers have quality Magpul stocks and grips and include full trigger groups. Use the money you save with these bargain lowers to buy a top-grade barrel.
3. Midsouth — RCBS Reloading Gear Sale, Save up to $110
⏺ Major sale on RCBS tools, presses, powder scales and more
Midsouth is running a huge SALE on RCBS products — Presses, Reloading Tools, Powder Dispensers, Tumblers, Dies, Priming Sets, Casting Accessories and more. Save up to $110 on Reloading Kits, up to $50 on powder scale/dispensers, and save $50 on case prep kits. Go to Midsouth’s RCBS Sale Page to see all 17 items on sale.
4. Midsouth — Starline Rifle and Pistol Brass Sale, Save 10-12%
⏺ Good selection of Starline cartridge brass on sale
Midsouth is currently running a major sale on Starline brand Rifle Brass and Pistol Brass. Prices are discounted 10-12% on popular cartridge types including 9mm, .44 Magnum, .45 ACP, .223 Rem, 6mm Creedmoor, .308 Win and more.
5. Natchez — SIG Sauer Scope and Rangefinder Combo, $399.99
⏺ Great “intelligent combo” — LRF data works with scope
Here’s a solid combo kit for hunters. For under $400 you can get the SIG Sauer BDX rangefinder and riflescope system — a 3.5-10x42mm scope and laser rangefinder. With the SIG BDX smartphone App you can pair the KILO BDX rangefinder and the BDX-enabled scope. Once you’ve created your basic ballistic profile, the system’s brain tells you the needed hold-over. After ranging your target, the KILO BDX rangefinder employs advanced Applied Ballistics software and then sends the elevation solution to the scope via Bluetooth.
6. EuroOptic — Swarovski 75th Anniversary Sale, Save up to $500
⏺ Save hundreds on top of the line optics
If you are looking for a superb riflescope, spotting scope, binculars, or rangefinder binoculars, check out the Swarovski 75th Anniversary Sale at EuroOptic.com. We’ve tested Swarovske RangeFinder Binoculars and they are superb, as is the Swarovski modular spotting scope system.
Here’s a great deal on good electronic muffs. Right now you can get black Walker’s Razor Slim Electronic Muffs (#ad) for just $33.28, a 58% discount. Other colors of Razor Slim muffs are offered starting at $37.00 for plain black (#ad). These Razor muffs have a good noise reduction rating (NRR) of 23 dB. (For best protection run plugs under the muffs.) The Razor series also feature Walker’s comfort fit headband for all day shooting. NOTE: These are Amazon’s #1 Best Seller in Hunting & Shooting Earmuffs.
8. Amazon — KUBEI USB Rechargeable Digital Scale, $24.99
⏺ Compact scale with USB-rechargeable battery at great price
Everyone can use an inexpensive, compact scale for loading at the range or sorting bullets or maybe even primers. One very affordable option KUBEI USB Rechargeable Digital Scale (#ad). Unlike most other inexpensive digital scales, this comes with a large dust cover with a “window” for your powder pan. Notably, this scale can be conveniently recharged with a standard USB cable — no batteries to replace ever! We have heard positive reports from Forum members about this $24.99 portable scale, which offers 9 types of weight units, calibration weight, and fold-down protective lid.
9. MidwayUSA — Frankford Arsenal Tumbler Kit, $59.99
⏺ Good, reliable tumbler complete with media separator
You want your cartridge brass to be clean before resizing and bullet seating. A tumbler can clean large quantities of brass quickly and efficiently. One of the best tumblers for the price is the Frankford Arsenal Quick-N-EZ Vibratory Case Tumbler. This reliable tumbler holds up to 600 9mm or 350 .223 Rem cases. The included separator fits most buckets, allowing efficient collection of media after tumbling. Bonus: If you order at least $99 of products from MidwayUSA, this Tumbler Kit ships free.
10. Amazon — Splatterburst Target 50 pack, $35.99
⏺ Good target with hi-viz bright yellow shot displays
Splatter targets make it easy to see your shot locations, even at significant ranges (300 yards and beyond). By contrast, bullet holes on regular paper targets can be hard to see past 200 yards. With these Splatterburst 12″x12″ Targets (#ad) you can instantly see your shots upon impact and spend less time checking your target. These targets feature five diamonds in a high-viz grid pattern for precise aiming. Chose a 10-pack for $12.99, a 25-pack for $22.99, or a 50-pack for $35.99.
As an Amazon affiliate, this site can earn revenues through sales commissions.
Oversizing cases also causes problems because the firing pin doesn’t have the length to reach the primer solid enough to ignite it 100% of the time. When you have one that is oversized, you usually have a bunch, since you usually do several cases at a time on that die setting. If the die isn’t readjusted, the problem will continue on the next batch of cases also. They will either not fire at all or you will have a lot of misfires. In a bolt action, a lot of time the extractor will hold the case against the face of the breech enough that it will fire. The case gets driven forward and the thinner part of the brass expands, holding to the chamber wall and the thicker part of the case doesn’t expand as much and stretches back to the bolt face. If it doesn’t separate that time, it will the next time. When it does separate, it leaves the front portion of the case in the chamber and pulls the case head off. Then when it tries to chamber the next round, you have a nasty jam. Quite often range brass is the culprit of this because you never know how many times it has been fired/sized and in what firearm. Back to beating it on the ground again till you figure out that you have to get the forward part of the case out.
Commercial Chamber Length Gauges May Not Work with Custom Chambers
