Fans of PRS/NRL competition should check out this Armageddon Cup show. Shooting USA offers a special hour-long edition devoted to the second Armageddon Gear AG Cup Invitational. The show airs today, Wednesday 6/9/21 at 9:00 PM Eastern/Pacific (8:00 PM Central) on the Outdoor Channel. You can also stream the show anytime on Vimeo.
The 2020 AG Cup showcased an all-star line-up of tactical talent. 42 of the nation’s top PRS/NRL marksmen were invited to the three-day match at the Arena Training Facility in Georgia. $90,000 was up for grabs at this event — the highest cash payout in the history of rifle competition. There’s $1,000 for the winner of each stage and $50,000 for the overall winner of the Cup.
Watch Video for Highlights of Armageddon Gear Cup Tactical Match:
This full, 48-minute AG CUP episode can be streamed on Vimeo for $0.99. Or you can watch an unlimited number of Shooting USA shows for a $3.99 per month subscription. Click the video above to preview the broadcast.
2020 was the second year of the Armageddon Gear Cup match. With $90,000 in total prizes (and $50K for the Cup Winner) there couldn’t be more excitement or more pressure as the field of 42 competitors is cut down to 12 finalists. Those dozen finalists started Day Three with a clean record in their quest for the Cup title and huge pay-out.
Armageddon Gear Founder Tom Fuller competes in PRS and supervised the 2020 AG Cup.
In this hour-long Shooting USA special, John Scoutten and Armageddon Gear’s Tom Fuller report the action and interview top competitors. The winner of each of the 20 stages received a $1000 cash prize. During the show, you can watch the competitors adapt to challenging stage set-ups and weather conditions. With $1000 at stake for each stage, a single miss can cost serious money!
Arena Training Facility — 2300 Acres
The 2300-acre Arena Training Facility is a premier shooting facility with multiple shooting ranges from 50m to 2100m. Arena’s 1000-yard covered Known Distance range offers multiple benches, steel and paper targets out to 1000 yards. On Arena’s UKD (unknown distance) range shooters can engage steel out to 2300 yards. This 2100m UKD range boasts a 3-Story Shooting Tower, Air-Conditioned Shoot House, and multiple Positional Challenges.
Armageddon Gear — Tactical Accessories Armageddon Gear, founded by former U.S. Army Ranger Tom Fuller, sells support bags, gun cases, slings, suppressor covers, scope covers, and other accessories popular with the PRS/NRL crowd. Armageddon Gear now provides products to the U.S. Military, Law Enforcement, as well as PRS/NRL competitors.
Armageddon Gear Game-Changer Bag
Shooting USA is available On Demand via Vimeo.com. Watch a single episode for $0.99, or get a full-month subscription for $3.99 and watch as many shows as you like with limited commercial interruptions.
It’s great to see normalcy return to our shooting facilities, including Camp Perry. COVID is still a concern, but the ranges are opening up at long last. On May 22, 2021, the CMP hosted a Garand/Springfield/Vintage and Modern Military Rifle (GSMM) Match on the electronic targets of Petrarca Range at Camp Perry.
The CMP’s recreational-style events, like the GSMM Match, are designed to ease interested individuals into the sport. On the firing line are a mix of seasoned competitors and those getting started in marksmanship. They all come together to share a common interest. The match allows shooters to meet old friends and enjoy the company of fellow shooters. And of course there is the fun and challenge of the course of fire.
GSMM matches attract new shooters as well as older competitors. You don’t need to make a huge investment in rifles or optics. We have friends who have done well with a “box stock” 1903 A3 Springfield they acquired from the CMP decades ago
During Petrarca GSMM matches, CMP staff members are always on hand to ensure safety on the firing line and answer questions. This match is fun and efficient. The electronic targets, with monitors at each station, show shot location/score instantly. And there is no pit duty. Competitors never have to venture downrange to change or retrieve targets.
Twenty-five competitors participated in Camp Perry’s May GSMM Rifle event. Similar GSSM matches will be held at the Petrarca Range on June 26 and September 25, 2021. Here are the May Match “Top Guns” by class, with their scores:
M1 Garand: Jeffrey Beierke, Blissfield, Michigan – 277-3X
Springfield: Andy Welter, Westerville, Ohio – 262-6X
Modern Military: Scott Whiteman, Fort Wayne, Indiana – 280-5X
CLICK HERE to learn about the Petrarca Range electronic target system at Camp Perry, Ohio.
The 600-yard target has an X-Ring 6 inches (1 MOA) across, while the 10-Ring spans 12 inches (2 MOA).
The following article is about reloading for NRA/CMP Highpower Rifle competition and is geared toward competitors shooting the AR15 Service Rifle. In Highpower Rifle competition, shooters fire in four stages: Standing slow-fire at 200 yards, Sitting rapid-fire at 200 yards, Prone rapid-fire at 300 yards, and Prone slow-fire at 600 yards. Competitors use a sling for support in all positions but standing. A typical AR15 Service Rifle sports a 20″ free-floated barrel and a 4.5-pound trigger. Service Rifle scopes are limited to maximum power of 4.5X.
Thoughts on Loading for Service Rifles, Particularly for 600 Yards
by Danny Arnold, Team CMP Article originally published in CMP Shooting News
Before we get started, I want to stress that all of the information that follows is geared toward the .223/5.56 Service Rifle. That doesn’t mean that there’s nothing here for anyone else, but the .223/5.56 Service Rifle platform is where I’ve spent the majority of my time, so here we go.
There is only one “Perfect” 600–yard load for my rifle, True or False? This example is more anecdotal than scientific, but it provides some food for thought….
Team CMP spent the early part of March competing in the Orange Blossom Regional. As soon as we got on the range, Sara Rozanski (Team CMP member) started having problems with her 600-yard ammunition. Nearly 1/3 of her cases were exiting the chamber minus the primers. I offered to swap my ammunition for hers, suspecting that my Wylde chamber would be more forgiving than her CLE chamber — a solution that seemed to solve the problem. At least neither of us was blowing primers!
Sara’s ammunition was a factory load using a well-known 80+ grain bullet with an unknown primer and powder, using brass from a respected manufacturer. My load was a different brand of 80-grain bullet, with my choice of powder and primer, all in brass made by someone else. Given the color of the primers, the only thing that our ammunition could possibly have had in common was the brand of powder… maybe. So, how did we shoot?
Sara and I shot the two-person team together and the entire 2,400 Aggregate, although on different relays. Sara’s combined 600-yard score was 780-28X (97.5%). Mine was a 783-24X (97.87%). Our scores were never more than two points apart on any of the four days. Keep in mind that we were using each other’s ammunition the entire time.
So, we had different barrels, chambers and ammunition, but similar results. That goes back to the idea that a good load will perform similarly if fired in a good barrel.
Are We Too Focused on Ballistic Coefficients (BCs)?
The revailing wisdom has always trended toward loading the highest-BC bullet we could find and pushing it as fast as possible. Back in the early ’90s when I got started with the AR15, the 80-grain Sierra was state of the art. Actually, I picked up all of my Leg points with it, although today it looks a bit dated — kinda like me.
So, the question I’ll pose is this: Would you rather shoot a high-BC bullet that groups 3/4-MOA (minute of angle) or a lower-BC bullet that groups into one-half-MOA traveling 50 feet-per-second faster? The reason that I posed this question is a situation I found myself in a decade ago. Our coach decided that he wanted us to pair-fire some 600-yard for practice. Unfortunately, I hadn’t gotten the memo and all that I had available was my normal short-line ammunition, loaded with a 77-grain bullet. The shooter I was paired with was using a higher-BC bullet than I was, but in the end, we both shot 198s.
Admittedly, using 77-grainers meant that coach had to work a little harder to keep us together on target, but it was a teaching moment for me. I knew that my upper shot 77s better than the available bullets in the 80-grain range, so I cranked out a windage table for the 77-grain bullet at 600 yards and shot those for the rest of the season. After all, the wind blows ALL bullets around. It’s just a matter of knowing what YOUR bullet is doing.
With the shortages that we’re experiencing right now, a lighter bullet may be all that you have available for the 2021 season. That doesn’t mean that you’re disadvantaged though.
Danny Arnold teaching Highpower Clinic at 2021 CMP Eastern Games
Loading High-BC Bullets
In the past decade, several bullets have appeared that weigh 80-grains or more. One thing that many of them have in common is a very sharp nose profile, whether metal or polymer. The question is: Are you using the right seating stem?
The jacket material in the bullet’s nose is very thin. If you section a bullet, you’ll find that there is a surprising amount of air space in the nose. If you’re using older seating dies, your seating stem may be contacting the bullet nose too close to the tip, where the jacket is the both thinnest and is unsupported by the lead core. This can manifest itself either as a deformation at the very tip of the bullet or as a circular dent around the bullet nose that you can see and feel with your thumbnail. I think we can all agree that denting a bullet is usually considered a bad thing.
One company goes so far as to recommend their proprietary seating stem for use with their high-BC bullets. Other companies leave it up to you to find a seating stem that will allow the bullet nose to go deeper into the seating stem, moving the contact point further down the bullet where the jacket is thicker and supported by the core material.
Seating Depth and Bullet Preferences
Some bullets don’t mind some “jump” into the lands, but some really do. Unfortunately, manufacturers don’t tell you much about that. Your chamber configuration (Wylde, CLE, or some hybrid of the two) and the bullet that you choose will determine your optimal seating depth. Long and short of it, a quality measuring tool to determine seating depth is a necessity these days. Keep in mind that if you’re doing this with a brand new barrel, the throat is likely going to change slightly in the first 200 rounds and may need to be re-measured. Actually, since all of your short range ammunition has to be loaded to magazine length, you’re probably better off developing your short range loads before starting on long range load development. That gives the throat a chance to wear in a bit on a new barrel.
Brass Prep — Why It Is Important
When match-grade AR15s first arrived on the scene, it was amazing how little it took to get them to shoot well. Other than making sure that I had brass from the same lot and running it through a set of match-grade dies, I did nothing. Of course, we were also using a post front sight. Was the occasional bad shot me, the rifle, the load or just an archaic sighting system?
Transitioning to optics has caused me to reconsider how and what I do in my reloading process: That, and having some extra time on my hands to experiment.
A little (or a lot) of time spent with a neck turning tool, a primer-pocket uniformer and a flash-hole reamer will quickly show you how consistent brass is by manufacturer and even by individual lot. That exercise also makes the prices charged for high-quality brass seem ridiculously cheap. That doesn’t mean that I advocate neck-turning or other uniforming practices, nor do I advocate spending scandalous amounts of money on long-range brass. However, our sport is about consistency. The consistency of your brass is a matter of choice, whether you choose to simply segregate cases by weight (cheap option), neck turn (labor intensive) or open your wallet a little wider for premium brass.
Weighing Charges vs. Throwing with Powder Measure
To measure or weigh? For a long time, I used a powder measure to throw all of my 600-yard loads. The powder I was using metered well, and the results downrange didn’t justify the extra time spent with a scale. That was in the day of iron sights though. Nowadays, I’m throwing my charges and trickling up to the desired weight as measured on a scale that weighs to a 100th of a grain.
To quantify the difference between individually weighing each charge versus throwing charges with a powder measure, I weighed six kernels of powder that I trickled into the pan and then dumped them into the hopper. Going through that process 10 times, I came up with an average weight of .08 grains for six kernels. Next, I threw 50 charges for weighing using my powder measure. If I felt the measure hanging up as it cut kernels, I put the charge back into the hopper without weighing it.
That’s six kernels of powder sitting in the pan — average weight .08 grains.
Those 50 smoothly-thrown charges varied .26 grains from lowest to highest, with the majority varying no more than .16 grains from highest to lowest. If the desired weight was exactly in the middle, at worst you’d be .13 grains (9-10 kernels) low or high, with the majority being off no more than .08 grains (6 kernels) above or below the desired charge weight. Is that enough to send a shot outside the 2-MOA 10-Ring? Probably not.
Has more consistent brass and weighing charges to one-hundredth (0.01) of a grain added up to higher scores? Honestly, this question is hard to answer. Looking at the results on paper at 200 yards, using a powder that meters well combined with a consistent touch on the loading lever doesn’t appear measurably different than meticulously weighing each and every powder charge. Looking back over my 600-yard plots however, I can see a trend toward a group that is closer to X-Ring height.
Since the bullseye is widest at the center, shooting groups that are the height of the X-ring gives you more room for error when the wind is blowing. That can translate into higher 600-yard scores.
How You Load Your Ammunition vs. How You Load Your Rifle
The loading/chambering cycle of the AR-15 is, in a word, violent. You have a relatively heavy bolt and carrier assembly under power of a stout buffer spring slamming forward to chamber each round of ammunition. By design, those rounds were supposed to be held securely by the magazine feed lips until the bolt stripped them off the follower. Obviously, due to their overall length, 600-yard loads can’t be chambered that way. Although the barrel extension is funnel-shaped, it’s also got a lot of “teeth” ringing the inside of it (see below).
Whether you’re using a standard magazine or a single-round loading device (SLED), dropping a round in the loading port and releasing the bolt is an act of faith in that you’re trusting the bullet to arrive in the chamber undamaged.
Ask yourself, how many times have you seen someone drop a round on the follower, press the bolt release and watch as the bolt jammed on a cockeyed round? If that happens once every 100 tries, how many times did the bolt close on a scratched, dented, or misaligned bullet? Could that be the cause of the occasional errant shot?
My technique is to drop each round on top of the SLED and then push it slightly forward with my finger, partially chambering it before releasing the bolt. Admittedly, some people may be unable to do this due to body configuration or left-handedness, but why go to all the trouble of loading “perfect” ammunition and then damage it on the way into the chamber?
Now that we’ve covered bullets, brass, and assorted errata we can move on to discussing loads for 600 Yards…
The NRA Highpower 600-yard target has a 6-inch (1 MOA) X-Ring, and a 12-inch (2 MOA) 10-Ring.
Load Development for 600 Yards
Finding a load for 600 yards is a lot like finding a load for short range. Once I decide on a bullet, powder, primer, velocity range and a measured guesstimate of seating depth, I load 10 rounds of each test load, increasing in 0.2 (2/10) grain increments. I test them from the prone position at 200 yards. Ideally, I want to see two loads that are 0.2 (2/10) of a grain apart that shoot almost identical groups. The load that I choose will fall in between the two best shooting loads that I tested. If the first load is XX.2 grains and the second is XX.4 grains, my chosen load will be XX.3 grains.
Why develop loads in 0.2-grain (tenths) increments if I have a scale that measures in 0.01-grain (hundredths) increments? Or, why not test in 0.1-grain increments?
For me, working in 0.2-grain increments gets me to the results quicker. Also, there is a difference between accuracy and consistency in this scenario. Developing loads in 0.2-grain increments gets me to an accurate load. Producing that load using a scale that accurately measures to .01-grain insures a consistent load, assuming that I do my part.
Once I’ve settled on a load, it’s time to play with seating depth, if I choose to. If I’m lucky and the groups are acceptable as-is, I won’t do anything. If I think there’s room for improvement, I’ll experiment a little. Depending on the bullet, changing the seating depth by a couple of thousandths one way or the other may change the group size. During this phase of testing, it’s a good idea to chamber a round and see if the entire round will then extract. If you leave a bullet stuck in the throat, your rounds are too long. Finding that out at a match can ruin an otherwise good day.
Danny Arnold shooting his AR15 Service Rifle, standing position at 2021 CMP Eastern Games.
Another thing to keep in mind is that your barrel is not static. Every round fired has an effect on the throat, vaporizing and scouring away metal until the distance the bullet travels before meeting the rifling measurably increases. If you have chosen a bullet that shoots best when close to the lands, you’ll need to periodically re-measure and possibly change your bullet seating depth to maintain that optimal relationship.
The Elephant in the Room — User Skill Level
There’s really not a delicate way to put this, so I won’t try. There’s little point in spending time and effort developing a load that shoots into half-MOA off the bench if you’re only capable of shooting 2 MOA using a sling right now.
That doesn’t mean that there’s no hope. On the contrary, it just means that your time and effort is better spent practicing with some good short-range ammunition on reduced targets at a 100 or 200-yard range. At that distance, wind is not a factor and your technique can be improved more quickly so you’re in a position to benefit from that ½ MOA ammunition.
About Team CMP
CMP has created a Highpower Team with top competitors. Team CMP competes at several events throughout the year and most importantly, helps to teach Highpower Clinics at CMP Competition Events. Learn from Team CMP at Camp Perry during the Advanced Highpower Clinic, scheduled this year for July 30 through August 1, 2021. Visit the Highpower Clinic Web Page for more information.
The Civilian Marksmanship Program is a federally-chartered 501(c)(3) non-profit corporation. It is dedicated to firearm safety and marksmanship training and to the promotion of marksmanship competition for citizens of the United States. For more information about the CMP and its programs, visit www.TheCMP.org.
Want to instantly measure your shot groups with precision, just by using your smartphone? You can do this with the excellent, proven Ballistic-X program, which has versions for both Android and Apple (iOS) devices. Ballistic-X is handy, relatively precise, and easy to use. But it does cost $7.99.
If you want to try a group measuring App that is completely FREE, there is a good new Android App called My Shooting from Bokili Production software. This new My Shooting App was created by a match shooter in Europe. It actually offers some cool features not available with most other group-measuring Apps. For example you can measure and display MULTIPLE group sizes on the same screen and keep them all in one file so you can quickly compare group size. There is a radius value in addition to group size (center to center of farthest shots). The App also includes an INFO box where you can display rifle type, sights/optics, ammo caliber, target distance, date, and even wind values and temperature. That’s handy.
FREE APP — You can download My Shooting App from the Google Play Store for FREE. Sorry there is NO Apple iOS/iPhone version at this time.
My Shooting lets you take images and perform all measurements internally within the application. To use the My Shooting App, simply take a photo of the target(s) with your smartphone. Then enter a known dimension on the target (such as the diameter of 10 Ring). Next click a circle on each shot-hole, and then mark the aiming point on the target. The App then does all the calculations, listing the group size in inches or mm (as you prefer). The App also list the Radius of the group, and the group’s Point of Impact (POI) separation from the Point of Aim.*
NOTE: If you enter bullet caliber and target distance, My Shooting App will display the angular measurement in MOA or Milliradians. That can be VERY handy when shooting at long ranges. The “smart” App shows the group’s actual dimension PLUS the equivalent MOA or Mils at your shooting distance. The App lets you choose either imperial (inches/yards) or metric measurements (millimeters/meters).
Bojan Radović, the creator of My Shooting App, is a shooter himself and an AccurateShooter.com visitor. He told us: “I am a shooter and a programmer from Europe. I recently created an Android App that works very precisely to measure a group of hits. The application is free!” NOTE, however, like most free Apps, the My Shooting App does contain small advertisements.
* POI (indicated with “X”) is precisely calculated as the mean value of all hits in relation to the center of the target — i.e. the mean distance from Point of Aim. The POI location reference (e.g. “down-left”) states a directional angle for which you can make a correction on your optical sight. POI displays with an actual distance (mm or inches) and the equivalent MOA or MRAD.
Koenig Triumphs for 19th Time
Team Ruger Captain Doug Koenig has just won the Bianchi Cup (NRA Action Pistol Championship) for the 19th time in his career. That is a remarkable accomplishment, as the the Bianchi Cup is considered by many to be the most unforgiving and difficult pistol competition on the planet. This legendary competition draws the top pistoleros from around the world. The Bianchi is Tough — for a chance to win overall, you basically have to “shoot clean”, with perfect stages.
Koenig won the Open Division and finished First Overall, capturing the title with a final 1920-182 Aggregate — truly impressive. Koenig took the win shooting a Ruger Custom Shop SR1911 Competition pistol. This championship was held at the Green Valley Rifle & Pistol Club in Hallsville, MO.
Koenig nailed perfect scores of 480 on all four Bianchi Cup events: Practical, Barricade, Moving Target and Falling Plates. That quadruple perfect performance earned Koenig an Aggregate score of 1920. In addition he completed the match with 182 total X-Ring hits, six more than the nearest competitor. By the way, Koenig (aka König) means “King” in the German language. There is no question that Koenig is King of the Bianchi Cup.
“Winning the Bianchi Cup title for the 19th time in my career is very special on its own,” said Koenig. “But to do so after the difficult year we’ve all faced, and to do so wearing a Team Ruger jersey, has made this win that much more meaningful for me.”
What skills does it take to win a Bianchi Cup? You need speed, accuracy, control, and discipline. Koenig explains some of these techniques in these two videos below. You’ll find 30 more Doug Koenig Videos on the NSSF YouTube Channel:
In Memoriam: Kelly McMillan, 1954-2021
Kelly McMillan has left the range. He passed away on June 1, 2021 from rapid, unexpected medical issues. This is a great loss for the shooting community. Kelly was a major figure in the shooting sports world, one of the greatest supporters of competitive shooting and rifle Team USA. Kelly was the son of Gale McMillan, founder of McMillan Fiberglass Stocks. Kelly was the driving force behind McMillan Stocks for decades, but had sold the company earlier this year.
Kelly’s successors at McMillan Fiberglass Stocks posted: “It is with great sadness that we announce the passing of Kelly McMillan. Kelly spent most of his life putting his unique mark on the firearms industry. His influence and efforts expanded beyond the famed McMillan Stocks…. We are forever grateful to Kelly for what he built. We are grateful that he poured his heart into his many interests. We will celebrate his legacy and see that his lifelong pursuits will continue to grow. Our thoughts and prayers are with his family during this difficult time.”
Anyone who ever interacted with Kelly knew him as a strong, forthright, ethical, and generous man. He gave so much back to the shooting community — through sponsorships, by providing stocks to shooters, and by helping shooting teams.
This Editor can also say that AccurateShooter.com owes a debt of gratitude to Kelly. His company was one of the very first sponsors of this site when we started as 6mmBR.com 17 years ago. As he supported us, he also helped many notable shooters such as Derek Rodgers (F-Class World Champion, 2017 K02M Champion), and Paul Phillips, the 2019 K02M Champion. On learning of Kelly’s death, Paul Phillips posted:
“I have no words to express how saddened I am today. We lost an icon in the shooting industry. Kelly McMillan was not only a great friend but the most generous and giving man I knew in the industry. There is not enough space to write about everything he did for competitive shooters, military snipers, hunters, and shooting enthusiasts.
You were one-of-a-kind Kelly and I will forever remember your friendship and how big an advocate you were for shooting sports. RIP my friend. Prayers go out to Kelly’s family for this tragic loss.”
Kelly’s Wall of Honor in Phoenix proudly displayed McMillan-stocked rifles used by U.S. Military marksmen.
Kelly was also an avid hunter. Here he is with Derek Rodgers (left) and Paul Phillips (center).
Derek Rodgers wrote of his friend and hunting partner: “It is difficult to tell you how deeply saddened I feel about the loss of Kelly. What started as a shooting relationship quickly became a close friendship so many years ago. It was a privilege to know Kelly on a personal level and I will never forget his generous, caring nature and the never-ending kindness he had for others. My heart goes out to his family and he will forever be missed.”
Members of the Shooting Sports Industry Remember Kelly
“We mourn the passing of an icon in the precision rifle community. Rest in Peace Kelly.” — G.A. Precision
“Every man’s heart one day beats its final beat…. The shooting industry lost a legend today. You were a critical piece to the Marine Corps Sniper Program and the shooting community. Kelly McMillan, you will be greatly missed and your legacy will continue.” — Bravo Delta
“Kelly did a lot of things in the sport that were not profit driven. He was a real force in where we are today. He will be missed.” — Wheeler Accuracy
“Dad, Grandpa, Husband, Businessman. Pioneer in the firearms industry for over 30 years. Advancing and pushing the limits of composite rifle stocks. Avid supporter of the NRA, NSSF, and Youth Shooting Sports. The industry has lost a Titan. You will be missed.” — Grayboe
“We lost a great man in the shooting industry. Thank you Kelly McMillan for imparting your leadership, friendship and knowledge to the shooting community.” — Sheila Miles
Kelly (left) with 2016 K02M Winner Mitchell Fitzpatrick, and team-mates Paul Phillips and Bryan Litz
Kelly (far left) with F-Class Team USA.
Remembering Kelly McMillan — How He Helped Shooters by David Joe, Texas
Kelly McMillan often proudly referred to his father Gale McMillan’s early pioneering work in fiberglass stock production. He assumed that family mantle and moved it forward, for very much of his life, with an energy and dedication few sons match. Kelly was part of a real American family business success story…
He was especially proud of the military’s adoption and deployment of several McMillan stock models. He described to me once how he, himself, was the one who mixed the green camo colors for those early military stocks. I could tell that Kelly really loved stock building for competitions. I think those were his proving grounds for new ideas, but more importantly, his people — the competitors he supported.
Kelly with F-TR World and past USA Champion Derek Rodgers and Nightforce’s Sean Murphy.
Kelly enthusiastically and generously helped a large number of F-Class teams, ELR teams, and individuals. I recall dinner in 2018 in Raton with Kelly and some 40 grateful members of teams, including the team my young daughter was on. Kelly was the honoree, but he picked up dinner and then defrayed costs for the teams — what a gentleman. Kelly treated people really well, and that leaves such a lasting impression.
Kelly was an original sponsor of the first All-Women F-class Team, X-It Strategy. That was just one example of the many teams he sponsored.
Don’t Be “That Guy” (The Bad Apple on the Firing Line)
By SFC Norman Anderson, USAMU Service Rifle Team Member
You know the guy, he’s still talking at the coffee jug when his preparation period begins, then his magazines aren’t loaded when the command “STAND” is given, and finally, he doesn’t know the rules when he argues with the block officer as his target comes up marked “9 and No”. Although this guy might be the highlight of the “after match” activities, he is the proverbial bad apple on the firing line. With this example fresh in your mind, let’s go over how not to be “that guy”.
While the sport of High Power shooting is a hobby for most, all are passionate about performance throughout the day. In order to achieve your maximum performance each and every day, it is essential that you conduct yourself as a professional competitor. As a competitor, you have a personal responsibility to know the course of fire as well as the rules and procedures that apply to it and to be prepared to follow them. Knowing this will not only make you a better competitor, but it will enable you to resolve situations with other targets besides your own. So what does all this mean? I’ll explain…
Know the Course of Fire
Know the course of fire. It sounds easy enough, as we all shoot plenty of matches, but it’s more than that. If you think about it, how many people in the pits, for example, do not really know what is happening on the firing line? This leads to targets being pulled early during a rapid fire string or missing a shot during a slow fire string. In cases like this, the result is the same, delays in the match and upset competitors. To avoid being “that guy,” it is imperative that you stay tuned to the events as the day progresses. When you are at the range shooting a match, be at the range shooting the match.
At any firearms competition — be sure you know (and understand) the course of fire.
Know the Rules
Now, let’s discuss rules. As you have probably heard more than once, the rulebook is your best friend. Here is why. I can virtually guarantee that most competitors know some of the rules based only on the old “this is how we do it at home” adage. The funny part of that is, the same green NRA rulebook and orange CMP rulebooks are used to govern High Power matches all over the country.*
It is vital that all shooters be familiar with the rules as they are written, not with “how they are applied at home”. This creates consistency and continuity in how matches are conducted, from local club matches to state tournaments to National Championships. Knowledge is power when it comes to scoring targets under contention, what to do in the case of a malfunction, or even how to file a protest correctly. These rules are in place for a reason and it benefits everyone to both know and operate by these rules.
Maintain Composure and Humility — Exhibit Good Sportsmanship
One aspect of competing that cannot be forgotten is bearing. As I mentioned earlier, you must be prepared for both good and bad to happen. All too often we all see “that guy” (or that “that guy’s” gear) flying off of the firing line in disgust. Remember that we all must maintain our composure and humility in all conditions, not matter what happens. After all, it’s just a game. To put it into perspective, if it were easy, attendance would be a lot higher. Sportsmanship must be displayed in an effort to keep from ruining the day for all those around you. It doesn’t cost anything to smile, and smiling never killed anyone. So turn that frown upside down and keep on marching, better days will come.
Like a Boy Scout — Always Be Prepared
Lastly, I would like to cover preparedness. Being prepared goes beyond simply having your magazines loaded and a zero on your rifle. It means approaching the firing line, knowing what you are about to do, being ready for what is going to happen (good or bad), and being ready for the results. If you approach the firing line to merely shoot 10 shots standing in your next LEG match, you are not going to be pleased with the result. You must be prepared mentally and physically, not only for the next stage, but also the next shot. By being prepared physically (equipment ready), you give yourself peace of mind which is an essential part of being prepared mentally, and by being prepared mentally, you are less likely to become distracted and are more likely to maintain focus for each and every shot.
Conclusion — Informed Competitors Make for Better Matches
The culmination of these efforts results in a shooter that knows how to be ready for success on the range, but also and perhaps more importantly, a shooter who knows what it means to be a competitor. When you have a range full of competitors who know and follow the rules and proper match procedures, the match runs smoothly, everyone shoots well, and a good time is had by all. In the end, isn’t that what it’s all about?
* After this article was originally written, the CMP separated its rules into multiple Rulebooks:
The 2020-21 24th Edition CMP Highpower Competition Rules for CMP-sponsored and sanctioned matches for Highpower Rifle events in National Trophy Matches, Excellence-In-Competition (EIC) Matches, CMP Cup Matches and other CMP-sanctioned competitions.
The 2020-21 24th Edition CMP Pistol Competition Rules for CMP-sponsored and sanctioned Pistol Matches in the National Matches, National Trophy Matches, Excellence-In-Competition (EIC) Matches, and other CMP-sanctioned competitions.
The fastest speed shooters in the nation showcased their skills at the Steel Challenge World Speed Shooting Championship this past April. Competing at the Talladega Marksmanship Complex in Alabama, dozens of top handgun and rifle shooters took on the Steel Challenge course. This consists of multiple 5-target close-range stages. Speed is king. The shooter with the lowest overall time wins. There are multiple pistol and revolver classes, both rimfire and centerfire. Increasing in popularity (and speed) are the rimfire rifle and pistol-caliber centerfire rifle classes. For both rifle and pistol there are iron sights as well as optics divisions. There are 13 gun classes in total, the most for any shooting championship.
The 2021 Steel Challenge will be featured June 2, 2021 on Shooting USA, broadcast on the Outdoor Channel. The Shooting USA video below covers the classes and course of fire for the Steel Challenge.
Shooting USA Video covers Course of Fire, Firearms Classes, and Target Layouts (1:20)
Definitely watch this 4-minute video produced by Shooting USA. It explains the classes, shows the stages, and illustrates ALL the different gun classes, pistol AND rifle. You can also see some of the world’s fastest shooters including Jessie Harrison (1:47, 3:44) and Max Michel (3:48). And if you want to be amazed by the speed of competitors shooting semi-auto rimfire rifles, watch the rifle run starting at (00:30) — five targets hit in under two seconds!
Here is Jessie Harrison, the fastest lady pistol shooter on the planet. At the 2021 World Speed Shooting Championship, Jessie won the Ladies Overall Open title for the 13th time with a total time of 93.03 seconds. Full Report on SSUSA.org.
Steel Challenge 2021 World Speed Shooting Championship
Practical shooting in all of its forms boils down to speed and accuracy and the one practical shooting sport that tests those two elements exclusively is steel shooting. Shooting USA calls it “drag racing with guns”. Draw and shoot five (5) steel targets with time as your score. With divisions expanded to rimfire rifles and pistol-caliber carbines, the times are now regularly setting new world records.
The Steel Challenge is a test of speed, accuracy and equipment that anyone and everyone can enjoy. By design, even someone who has never seen competitive steel shooting before, can tell a good run from a bad run. The unmistakable sound of five shots and five hits is an instant marker of success. There are eight standardized 5-plate stages, including the “Showdown” stage illustrated below.
Steel shooting has evolved over the years, but the courses of fire remain unchanged. The original concept for the Steel Challenge was designed around centerfire handguns drawn from a holster, starting with the shooter’s wrists above shoulders. Historically, 80 seconds was the time to beat and only a handful of competitors have done it. Since the inception of the low ready divisions, the time to beat has dropped to 60 seconds. That record was finally beaten in 2020. In the centerfire handgun match, the fastest times are posted by competitors using their enhanced open guns, with compensators and red-dot optics.
The competition was founded in 1981 by Mike Dalton and Mike Fichman, in Southern California. The two Mikes wanted an exciting alternative to paper targets and came up with the all-steel format. The Steel Challenge World Speed Shooting Championships have grown to one of the largest professional pistol competitions in America. In 2021, scores of competitors competed at the Talladega Marksmanship Park for glory and cash prizes. The Steel Challenge is governed by the Steel Challenge Shooting Association (SCSA) that consists of eight standardized stages with three types of steel targets: small circle, big circle, and square. Here is a steel challenge layout in Germany.
At the 2019 Alabama Steel Challenge State Championship, then 19-year-old Rimfire Rifle Optic Class shooter Chris Barrett set the fastest total time in the 35-year history of Steel Challenge: 59.82 seconds. SEE FULL Story at RangeStore.net.
Posting on the F-Class Competition Shooting Facebook Group Page, F-TR competitor Tony H. said he was very impressed with the new JoyPod-X coaxial bipod made by SEB Rests. The upgraded JoyPod-X features an enhanced head unit and new rapid height adjustment for the legs. The new JoyPod-X is also offered now in a variety of colors: Blue (as shown), Red, Green, Purple, Black, and Bronze.
Click to Zoom Photo CLICK HEREto view larger side-view image.
Tony H. stated: “First match today [shot] with the brand new JoyPod-X. What a GREAT bipod — thank you Sebastian Lambang for the outstanding product! Also want to thank Ernie Bishop for the awesome service he provides! Even getting used to the new setup made made that 597-38X even sweeter!”
Leg Height Adjustment System
on New 2021 JoyPod-X
JoyPod-X designer Sebastian Lambang tells us: “Now height adjustment of the JoyPod-X can be much easier quicker and more precise. With a simple, adjustable brake and improved ratchet system. Thanks to Bob Bock for the design suggestions”.
Watch the video to see how this works. You can adjust each leg individually in seconds. You can do individual clicks up and down, with ratcheted steps. Or slide the entire leg unit rapidly up and down for gross elevation changes. So you have the choice of small, precise increments or big movements — whichever you want. This is very slick.
JoyPod-X Is Shipping Now
in Six Bright Colors
The new 2021 JoyPod-X has started shipping with the first units arriving in the USA in late May 2021 (as you can see). The new JoyPod-X is available in blue, red, green, purple, black, and bronze colors.
The NRA has released information about the 2021 NRA National Rifle and Pistol Championships to be held July 6 – August 28, 2021. Registration for the 2021 NRA National Championships for Smallbore Rifle, High Power Rifle, F-Class, and Precision Pistol is now open. Competitors can REGISTER ONLINE for the 2021 NRA National Championships via the NRA Competitive Shooting Web Portal.
These 2021 NRA Championships will be held at Camp Atterbury, Indiana, from July 6, 2021 through August 28, 2021. Camp Atterbury has hosted the High Power Rifle Nationals since 2017. Here is the schedule:
Smallbore Rifle Championship: 6-18 July, 2021
Precision Pistol Championship: 20-25 July, 2021
F-Class Mid-Range Championship: 21-25 July, 2021
F-Class Long Range Championship: 27-30 July, 2021
Fullbore Championship: 1-7 August, 2021
High Power Mid-Range Championship: 9-13 August, 2021
High Power Long Range Championship: 14-19 August, 2021
ELR 1-Mile Championship: 20-21 August, 2021
Over-the-Course (OTC) Competition: 22-28 August, 2021
CLICK HERE to view the preliminary Match Program (PDF file). This includes aerial maps of ranges and housing locations. For the latest updates on Camp Atterbury and the 2021 NRA National Championship, subscribe to the free SSUSA Insider newsletter.
CLICK photo for Preliminary Match Program for 2021 National Championships
Lodging Options at Camp Atterbury — Summer 2021
Shooting Sports USA (SSUSA) recently released information on the NRA Championships at Camp Perry. The SSUSA article states: “As for lodging, there are several options. The most convenient are on-base, with Camp Atterbury offering hotel-style buildings with suites, along with standard rooms, and ‘open military squad bay’-style quarters available by reservation. Camp Atterbury also offers a limited number of RV spots, plus the MWR campground and cabins. Something to note: Lodging is controlled by the Camp Atterbury Lodging Office, not the NRA.
Click Photo for Large Map of Camp Atterbury, Indiana
Base Access for Summer 2021
Please note, Camp Atterbury’s main gate at Cyclone Street will be closed due to renovation. Follow the detour signs to the Schoolhouse Road Gate entrance. At base entry, each person will need to have a driver’s license or official government issued ID available for inspection. At base entry, each person will need to have a driver’s license or official government issued ID.
Health and Safety Protocols at NRA Championships
All participants at the NRA Championships should follow the Indiana National Guard Camp Atterbury COVID-19 policies. The NRA issued this statement regarding COVID-19:
“While the COVID-19 pandemic continues, competitor and staff safety is our primary concern. The NRA will follow federal, state and local regulations during this summer’s events. It is possible that due to COVID-19 the NRA and ISRPA events may become altered in order to promote better safety or remain compliant. It is possible that any or all of our events may become altered or at worse canceled due to the pandemic impact or significant changes. We do not anticipate canceling this summer’s events. We will continue to monitor the federal, state and local regulations and issue and issue further statements as needed.”
John Parker, Shooting Sports USA Editor, says this should be an exciting summer for rifle shooters: “As for High Power Rifle, the 2021 NRA Mid-Range, Long-Range, F-Class Long-Range, F-Class Mid-Range and International Fullbore Championships will also be fired at Camp Atterbury. The centerfire rifle matches will begin on July 22 and run through August 28.
Koenig Triumphs for 19th Time
Know the Rules
