|
|
January 21st, 2015
Bullets.com has contracted with Norma to produce 1,000,000 pieces of .284 Winchester and 6mm Dasher brass (500,000 of each type). This is big news for competitive shooters. The .284 Win cartridge is a proven winner in F-Class competition and the 6 Dasher is a record-setting mid-range benchrest cartridge. It’s tough to beat the Dasher at 300-600 yards, and the .284 Win is probably the most successful cartridge for F-Open shooters.
Bullets.com President Shiraz Balolia (left) and Norma Managing Director Paul-Erik Toivo “ink the deal”.
Shooters should be excited about these new offerings. Bullets.com’s contract with Norma calls for advanced production methods to make sure the new brass is truly “match-grade” and long-lasting. To ensure that primer pockets stay tight for many firings, the caseheads on the new brass will be double-stamped for improved hardness and strength. Additionally the new brass will go through an additional draw stage to ensure ultra-uniform casewall thickness. With these extra manufacturing steps, this new 6mm Dasher and .284 Win brass should be the best brass Norma has ever produced, as Bullets.com President Shiraz Balolia explains in the video below:
Shiraz Balolia Explains the Qualities of the New Brass
Shiraz reports: “Normally, Norma has about 25 steps of quality control (QC) during the production process of brass. They told us that our first shipments will have almost 30 steps to make sure that the brass is absolutely flawless when it leaves the factory.”
| For illustration only — actual specifications may be slightly different. |
6mm Dasher
|
.284 Winchester
|
 6mm Dasher without Fire-Forming Hassles
Until now, if you wanted to shoot a Dasher, you had to go through the time-consuming and laborious process of forming brass from the parent 6mmBR Norma case. You had to blow the shoulder forward, either through fire-forming or hydro-forming. Now that’s all changed — you will soon be able to take perfect 6mm Dasher brass out of the box, and “load and shoot”.
The Deal is done. New Norma .284 Win brass will start arriving in the USA in March, 2015, while the new Dasher brass is expected in late summer 2015.
IMPORTANT — The above diagrams were made 4 years ago with QuickDESIGN. They are for illustration purposes ONLY. These are NOT reamer prints, and there may be small differences compared to the Norma .284 Win and 6mm Dasher brass ordered by Bullets.com. Do NOT spec reamers based on the above illustrations. Wait ’til we have the actual Norma brass to measure.
January 21st, 2015
The Kelbly clan had an impressive new action on display at SHOT Show. This new Kelbly Atlas Tactical action features a super-hard, durable black nitride external coating. This is a not a spray-on or bake-on finish. It is actually a surface layer treatment of the metal that increases the toughness of the finish to 84 Rockwell while making it super-smooth. This allows the action to work well with minimal lubrication.
Ian Kelbly says this action was designed with input from tactical gunsmiths and PRS competitors. The action comes standard with a fluted bolt, APA oversized bolt-knob, and a +20 MOA Picatinny rail on top. The fluted bolt helps keep channel dirt and dust out of the contact surfaces. Ian says this black nitride finish should provide superior function in sandy, dusty, or dirty environments because it can run with almost no lube/grease that attracts and retains grit. Visit Kelbly.com for action specifications and current pricing.
January 20th, 2015
 Meeting old friends, and shooting new guns. That’s what Monday was all about at the annual Industry Day at the Range, a “hands-on” preview the day before SHOT Show opens in Las Vegas. Your editor met with old buddy Jason Baney at the crack of dawn and headed out to the Boulder City (NV) range.
We were not disappointed — there was plenty to see this year. On display were a bunch of new precision rifles, a slew of new handguns, and some very exotic optics. But Jason and I both felt that the star of this 2015 Industry Range Day was a modestly-priced little Savage — the new A17 in 17 HMR. Both of us wanted to own one of these compact new rifles. With a strong steel action, the A17 is accurate, fun, and ultra-reliable.
There were big rifles on display. Here’s the new Barrett 98B Fieldcraft, a lighter-weight version of the 98B. The Fieldcraft weighs just over 9 pounds. This is definitely an accurate rifle — shooting a 7mm magnum version from bench with bipod support, Jason managed 5 straight hits at 960 yards.
Among the many new precision rifles, there was one particularly patriotic model. Dolled up in Stars and Stripes livery is Ashbury Precision Ordnance’s new competition rifle. This is designed for F-TR and PRS competition.
We saw small pistols, big pistols, and pretty pistols. Here’s a fashionable pair of 1911-style semi-autos from Kimber. Jason said he’s bought one of these for Mrs. Baney.
This editor is a fan of big, accurate revolvers, and you won’t find many that are bigger, or more accurate, than the new Korth competition revolver. This prototype features a 4-position quick-adjusting rear sight, plus a slick system that allows the cylinder to be completely removed from the gun in seconds. (Note the little lever to the right of the hammer). The production version of this wheelgun is guaranteed to shoot 1.5″ or better at 50 yards.
Kimber displayed an impressive tactical rifle featuring a folding Manners Composite stock. This was a nice piece of kit. The Kimber action is a Mauser style with controlled feed. The rifle is offered in three chamberings: 6.5 Creedmoor, .308 Winchester, and .300 Win Mag.
Last but certainly not least, we got a look at the final production version of the Leupold VX-6, 7-42x56mm scope. This is a winner folks. It has a nice, clear reticle with MOA-type hash marks on both cross-hairs. We zoomed it up to full 42X power and it was bright and sharp (all the way out to the edges). The main tube is 34mm allowing plenty of elevation adjustment. All controls worked smoothly. We think, once the word gets out about this scope (now at dealers), it will be very popular with F-Class shooters and long-range benchrest competitors. Street price is around $1900.00.
January 20th, 2015
Semi-auto 17 HMR — could this be the perfect light-recoiling fun gun and squirrel slayer? With its new A17, Savage has created a gun that should be hugely popular. If you like the Ruger 10/22, you’ll love the A17. It shoots a more powerful cartridge, and has a stronger action and a better trigger. With a beefy steel action that looks like it belongs on a centerfire, this gun is strong. With quality barrels (fitted, as you’d expect, with a barrel nut), the A17 is accurate. And with the capability to launch 17 HMR rounds as fast as you can pull the trigger this gun is a hoot to shoot. The ability to get a quick second shot (without disturbing the rifle by working the bolt) will be a game-changer in the varmint fields.
Watch Us Shoot the New A17 (Rapid-Fire at 1:50):
Star of the Show
Jason and I both felt that the star of this 2015 Industry Range Day was this modestly-priced little Savage A17 in 17 HMR. MSRP is $469.00 we were told. No one knows the “street price” yet but we expect that to be about $370.00. Both of us wanted to own one of these compact new rifles (Jason tried to buy one on the spot) — what does that tell you? With a strong steel action, the A17 is accurate, fun, and ultra-reliable.
Jason put the gun through three rapid fire drills — firing as fast as he could pull the trigger. We could not get the A17 to malfunction in any way. It just ripped through magazines like a sewing machine. Flawless operation. Bill Dermody of ATK says “this is one of the most thoroughly tested Savage rifles ever. We put over half a million test rounds through the rifle during development. That’s why it’s so reliable.”
The Magic Chicklet
Look below at the A17 bolt. The little black hardened metal piece (called a “chicklet” by the Savage engineers) is the secret ingredient. It works like a retracting lug, allowing the A17 to operate in delayed blow-back mode. That permits the A17 to function flawlessly with the energetic 17 HMR cartridge.
Optimized 17 HMR Ammo That’s 100 FPS Faster
CCI has developed new, higher-velocity 17 HMR ammo for the A17. Because Savage is now part of the ATK conglomerate, CCI is now Savage’s sister company. So, CCI and Savage cooperated during the development of the A17. CCI found a way to get more speed from the 17 HMR and Savage engineered an action and bolt that are strong enough to handle the new 17 HMR ammo, which runs 100 fps faster than other 17 HMR ammo on the market.
January 19th, 2015
SHOT Show kicks off tomorrow, January 20th. As a sneak preview, here are some new (or newly marketed) products that will be on display in Las Vegas. We’ve reviewed nearly 500 featured products and here are some cool items that caught our eye. The AMP annealing machine is a break-through technology, and we’d love to have one of those AG Composites Carbon stocks for an M1A. The Bix’N Andy trigger isn’t really new, though most American’s haven’t seen one yet. It really is a gem. Enjoy these product snapshots. We’ll provide more “hands-on” reporting over the coming week.
AMP Induction Annealing Machine
Source: Bullet Proof Samples LLC, AmpAnnealing.com
Annealing Made Perfect (“AMP”) is a pre-programmed, fully-calibrated induction annealer. Extensive metallurgy testing has laboratory verified the temperature/time program settings, allowing precise and repeatable neck hardness every time. The AMP can handle cases from .17 to .338 caliber. Change from one cartridge size to another in seconds. The sophisticated calibration eliminates guesswork, so you don’t have to just “burn-off” lacquers and a stop-watch. Just select the correct program, set the pilot, and start annealing. Proper annealing provides more consistent neck tension and that translates to lower ES/SD and better accuracy, particularly at long range.
X-15 Side Charged Upper (SCU)
Source: X Products
The standard AR rear-pull charging handle is annoying, particularly when shooting prone. The folks as X-Products have a smart solution, an upper with a side-charging handle. We’ve seen side-charge uppers before, but these were custom mods. The $299.00 X-15 Side Charged Upper is a turnkey solution that works with a standard AR-15 bolt and carrier. No machining or modification is needed. The elevated charging position allows the bolt carrier to be operated with a proprietary cam pin that is included with the upper. The manufacture claims its X-15 upper offers “Increased performance with a gas slide that covers the charging port preventing gas and debris from hitting the operator when suppressed”.
Bargain-Priced Composite Stock with Bedding Block
Source: Stocky’s Stocks
This $199.00 stock combines the latest glass-filled nylon composite technology with Stocky’s proven AccuBlock aluminum bedding technology for Remington 700 barreled actions. These stocks are offered in varmint, target, tactical, and hunting rifle models. All variants offer a “drop-in” solution for Rem 700 actions. The $199.00 price is makes this a bargain solution for hunters and varminters who want to upgrade from a flexy “tupperware” stock.
Bix’N Andy Match-Grade Triggers
Source: BulletCentral.com
Bix’n Andy is an Austrian company that crafts some of the best triggers on the planet. Gunsmith Andy Atzl uses a unique ball bearing mechanism that allows for incredibly precise trigger pull weight adjustments. BulletCentral’s owners says: “Andy’s work is consistently top quality and we are lucky to be the exclusive North American importer and distributor for his products.”
Peterson Cartridge Brass
Source: Peterson Cartridge Co.
We welcome any company that’s jumping into the brass marketplace. Competition among brass-makers is always a good thing. For 2015, Pennsylvania-based Peterson Cartridge Co. will offer “match-grade” rifle brass for four (4) cartridge types: .308 Winchester, 7mm Remington Magnum, 300 Winchester Magnum, and 338 Lapua Magnum. On Peterson’s website, you’ll find a page that illustrates each stage in the brass-making process, from cupping to final trim and annealing. If you’ve ever been curious about how brass is made, check out Peterson’s Cartridge Manufacturing Process Page.
AG Composites Carbon Fiber Components
Source: AG Composites LLC
AG Composites specializes in the design, development and production of high performance composite components. AG makes carbon fiber rifle stocks, handguards and buttstocks, and AG can also provide carbon fiber OEM components for manufacturers. Check this handsome AG carbon fiber stock on an M1A. That brings an old Battle Rifle design into the 21st Century.
Bulletproof Safari Vest
Source: Miguel Caballero
This “discrete” bulletproof Safari Vest was originally created for celebrities, VIP clients, and business executives. However, this product could also benefit those involved in firearms training or range operations. (It only takes one Accidental Discharge by a newbie to spoil your whole day.) This vest features light, flexible, yet strong ballistic materials that meet NIJ 0101.06 standards. The Safari Vest features a front overlap that functions as an anti-trauma plate protecting the thorax. For increased comfort, the vest is engineered to distribute the weight evenly front to back.
Smith & Wesson Ported M&P Pistols
Source: Smith & Wesson
New from the Smith & Wesson Performance Center are four new Ported M&P pistols. What makes these pistols unique is the fact that they have ported barrels for reduced muzzle flip, as well as an adjustable trigger stop. Stop by S&W SHOT Show Booth #13729 to have closer look at all the features.
Swab-Its 17-Caliber and 22-Caliber Bore-Whips
Source: Super Brush
The Swab-its folks have just made it even easier to clean .177 air rifles, .17 caliber rimfire or centerfire rifles, and .22 caliber lever action and semi-auto rifles. Bore-Whips feature a 45″ polypropylene cord tipped with a durable, reusable swab. This handy, pull-through design allows for cleaning the proper way, from breech to muzzle. The bright-colored Neon Orange (.17 cal) and Neon Green (.22 Cal) plastic cords do double-duty, acting as Empty Chamber Indicators (ECI) at the range. Swab-its Bore-whips are available in 3-packs for both .17 and .22 calibers. Check out samples at SHOT Show Booth #1241.
Thanks to Forum member M500 for Product Tips.
January 18th, 2015
Can you fill a 30-round AR15 magazine in the blink of an eye — less than half a second? Well watch this video to see how it’s done, using the Israeli-designed Maglula Range BenchLoader™. In fairness, it takes about 20 seconds to fill the cleverly-designed device with thirty 5.56x45mm cartridges, but once they’re in place, a quick swipe of the hand is all it takes. Thirty rounds are zipped into the mag in 0.3 seconds (by our stopwatch). Don’t believe us? Watch the video. The magic happens at 0:42 and again at 1:17. Don’t blink — you’ll miss it.
CLICK HERE to Download Product Spec Sheet.
Maglula Benchloaders are rugged CNC-machined tools designed to load 5.56/.223 Rem magazines in a single hand stroke. In the video below, a manufacturer’s rep demonstrates the speedloader, along with the “Lula” lever-action plastic loader/unloader.
Frankly, we prefer using the original straight 10-round and 20-round magazines in our ARs since they extract easier and feed flawlessly. But, if you use 30-round mags for 3-Gun matches or other tactical disciplines, these Benchloaders look like they can really speed up the loading process.
January 17th, 2015
Gear Report by Kip Staton
Magpul jumped feet-first into the bolt-action precision rifle market by dropping a teaser video of their Hunter 700 chassis/stock system. Feast your eyes on this video that shows Magpul’s new chassis system in action:
The Hunter 700 (MSRP $259.95) is built around a ruggedly anodized aluminum bedding block, and utilizes a standard Magpul SGA cheek riser and spacers (from the shotgun line). It also features forward M-LOK slots, as well as multiple points to mount swivel studs and QD sockets. Weight is a svelte 2.9 pounds, and the system is compatible with factory Remington 700 bottom metal. And that’s not all.
By removing a spacer in the stock, end-users can convert the rifle to feed from the company’s new steel/polymer Bolt Action Magazine Well, which accepts standard AICS pattern magazines. MSRP for the conversion is an impressive $69.95, and that price even includes a mag. But — hold on — it gets even better (look at the photo carefully).
Yup. It feeds from PMAGs. New, AICS-compatible PMAGs. The PMAG-5 7.62 AC is a fully-featured polymer magazine, with an anti-tilt follower and MSRP of $34.95. Interestingly, the magazine holds five (5) rounds to comply with hunting regulations, but the follower features a trimmable, pre-scored stop that allows users to increase capacity by a single round for other purposes.
Magpul promises that this is just the beginning for their precision rifle accessory line, hinting at a larger-capacity PMAG-10 7.62 AC in the future, as well as other calibers. Anybody running AICS pattern mags (and that’s quite a few serious precision rifle guys) should be stoked about these new products.
 About the Writer
Kip Staton is a freelance gun writer based in North Texas, and loves to blog about news within the firearms industry and his perceptions on marksmanship at KipStaton.com. He served as the weekend range manager of the North Texas Shooter’s Association from 2010-2012, at which point he began performing sales consultations for a major online firearms retailer. Currently, Kip is a content marketer, copywriter and digital strategist for an award-winning Dallas marketing agency.
To read more gear reviews by Kip, visit KipStaton.com.
January 16th, 2015
Magnified Optic + Laser RF + Ballistics Computer. What if you could combine all that in a single, compact package. Impressive eh? Well Steiner-Optik (a Beretta-owned company), has done that. Steiner just announced its new “Intelligent” Combat Sight (ICS). The 6x40mm ICS, a true electro-optical aiming device, provides trajectory compensation by automatically calculating the point of aim based on ammunition ballistics, measured distance, and angle to the target out to 800 meters. The ICS combines a 6X optic with a laser rangefinder and a microprocessor-controlled ballistics solver.
Function Similar to Burris Eliminator
Steiner’s ICS is not the first integrated scope/LRF/ballistics calculator. The Burris Eliminator has been around for a few seasons, and it works much the same way. A laser senses the distance to the target, the required hold-over is calculated, and a red dot appears in the scope view. Put the dot on your target and pull the trigger. So Steiner isn’t bringing us something really new, it is just providing this technology in a smaller, ruggedized, waterproof package. (Steiner claims the ICS is waterproof down to 1 ATM – 10 m, which is actually pretty impressive.)
Ballistics Profiles for 7.62x51mm, 5.56x45mm, .300 BLK, .300 WinMag
While the magnification is optimized for the 7.62X51mm (.308 Win), the ICS’s internal ballistic calculator offers settings for other popular chamberings: 5.56x45mm, 300 Blackout, and .300 Win Mag.
The new ICS is easy to use according to Steiner VP Tom Frane: “Just feed the ICS your cartridge’s ballistic info and the scope’s computer and inclinometer instantly calculate perfect hold-over at your exact distance and gives you a bright red dot in seconds — all at the push of a button.” The 6x40mm ICS offers 120 MOA of total elevation. The illuminated reticle adjusts from dim to bright for daylight conditions. A Picatinny base on top of the ICS allows for the addition of a CQB sight, and there is a back-up iron sight on the right side of the unit.
January 14th, 2015
Handgun owners have debated the comparative merits of the 9mm, .40 S&W, and .45 ACP cartridges for decades, ad nauseum. If one focuses on downrange energy, there IS an answer to the age-old 9mm/40SW/45ACP debate, namely “none of the above”. Bottom line, if you really want the most powerful, widely available semi-auto handgun cartridge, the 10mm Auto beats the other three contenders. Don’t just take our word for it — check out the ballistics comparisons on GunData.org:
9mm vs. .40 S&W Summary and Ballistics | .40 S&W vs. 10mm Auto Summary and Ballistics
The .40 S&W has more energy than the older 9mm Parabellum cartridge, but the .40 S&W is trumped by the larger 10mm Auto. In fact, the .40 S&W is actually just a “detuned”, shortened 10mm. The .40 S&W was developed when the original 10mm Auto proved a bit too snappy for FBI agents.
Fans of the original hard-hitting 10mm Auto, have reason to celebrate. Now one of the great semi-auto handguns, the Sig P220, is available in 10mm Auto. “A 10mm version of the legendary P220 is at the top of the list of ‘most requested products’ from fans of our products,” said Jeff Creamer, Executive Director and General Merchandise Manager for SIG SAUER, Inc. “We heard the demand, and created a P220 that will make full use of the cartridge’s potential.”
Four different 10mm P220 models will be offered, all with 5˝ barrels. There will be one DA/SA model and three single-action-only (SAO) models. The Match Elite Reverse Two-Tone P220 is the one DA/SA model. It features match sights, G-10 grips, an Elite Beavertail, and a stainless finish with front cocking serrations
The Stainless Elite P220 and Stainless Elite Nitron® P220 are single-action only pistols featuring the Elite Beavertail, Siglite night sights, and front cocking serrations. Last but not least, the SAO “Hunt Ready” P220 comes with Sig Sauer Romeo1 mini red-dot sight installed, black G-10 Piranha grips and a Kryptek® Highlander camo pattern finish.
Sig Sauer Introduces 10mm Auto Pistol Ammo
To feed its new 10mm P220s, Sig Sauer will offer two new types of 10mm pistol ammo: 1) 180gr Elite Performance Full Metal Jacket (FMJ) target load; and 2) 180gr Elite Performance V-Crown™ Jacketed Hollow Point (JHP) and for self-defense and hunting. “We are pleased to add this accurate, powerful round to our Elite Performance Ammunition line,” said Bud Fini, Sig Sauer Marketing VP.
January 11th, 2015
Georgia-based PolyCase Ammunition has developed innovative polymer-based composite cartridge cases and injection-molded bullets. With a patent-pending design, the polymer cartridge cases are lighter than brass or steel cases, yet are heat-tolerant, and relatively easy to manufacture. These cases will be initially produced for .223 Remington, plus a variety of pistol cartridge types (.380 ACP, .38 SPL, 9mm Luger). PolyCase cartridge cases blend patented heat-resistent polymers with metal elements in the case base. According to the manufacturer, “the net effects are greatly reduced weight (compared to comparable loaded ammunition), durability… and competitive pricing.” Other companies have experimented with polymer cartridge cases in the past — none have successfully perfected the technology in a commercially successful product. Could PolyCase be the first?
PolyCase Ammunition — Material Characteristics
– PolyCase Pistol Cartridge Cases are 11.5 to 20% lighter than brass-cased ammunition.
– PolyCase Rifle Cartridge Cases are 23 to 60% lighter than brass-cased ammunition.
– PolyCase Cartridge Cases are self-lubricating — a positive factor compared to brass or steel cases.
PolyCase Bullets — Injection-Molded Blend of Copper and Plastic
PolyCase has developed its own unique bullets for use in pistol ammunition. PolyCase Cu/P™ bullets are precision injection-molded from a cutting-edge copper-polymer compound. These molded bullets will be offered in both polymer cases and conventional brass cases. (Early in the design process, PolyCase determined that molded bullets work well in both brass and plastic cases). PolyCase co-owner Paul Lemke (Lt. Col. U.S. Army, Ret.) says: “We are able to use essentially the same molds to produce bullets for brass casings and bullets for our polymer casings”.
PolyCase Pioneers Injection-Molded Bullet Technology
Powdered metal has been around for decades, but blending powdered metal with polymers and injection molding precise parts is a fairly modern process. While processes like sintered metal bullets and pressure-formed shotgun pellets have become commonplace, PolyCase is the first American company to produce and sell a completely injection-molded bullet.
For over a century most bullets have been mass-produced with a process called cold-forming. Lead and copper were shaped with brute force in punches and dies to create projectiles. While this is still a viable and effective way to produce bullets, other manufacturing methods are now available. By applying injection-molding technology, Polycase has developed a new type of bullet that has many advantages, as least for handgun applications. Bullets weigh approximately 70% as much as lead bullets with similar profiles. Lighter weight means higher velocities and less recoil. In addition, PolyCase bullets are lead-free, and low ricochet — two qualities important for indoor and close-range training. The injection-molding process also reduces weight variations (compared to cast lead bullets), and ensures excellent concentricity. Molding also allows unique shapes that are impossible to produce with conventional bullet-making methods (see photo).
|
