|
|
April 9th, 2014
Shooting USA’s annual one-hour SHOT Show Special first aired in February. If you missed the hour-long special the first time around, here’s your chance to catch it. The SHOT Show Special re-airs today, Wednesday, April 9th, starting at 2:00 PM Eastern Time.
 SHOT Show 2014.
Full 1-Hour Broadcast.
Tonight on the Outdoor Channel.
Lots and lots of new guns on display.
This is the episode of Shooting USA you don’t want to miss. Set your DVR for 2PM ET/1PM CT or watch the show at 9PM ET/8PM CT, on the Outdoor Channel. Host Jim Scoutten says: “John, Mike, and I are running 12 miles of aisles in the Sands Convention Center in Las Vegas, with 60,000 gun dealers and buyers. It’s your first look at the new guns and gear that will be making news this year. Set your DVR. We have a lot to show you in non-stop new product presentations.” CLICK HERE to See Products Featured on SHOT Show Episode
New products showcased will include: Ruger American Rimfire Rifle, Glock 42, Colt 2012 Bolt-Action Rifle, New S&W Revolvers, Remington R-51, Bergara Barrels, Hornady Rapid-Safe and much more.
Shooting USA airs its annual one-hour SHOT Show Special today, Wednesday, February 12, starting at 2:00 pm Eastern Time. Other broadcast times are listed below.
The Shooting USA Hour on Wednesdays:
Eastern Time: 2:00 PM, 9:00 PM, 12:00 M
Central Time: 1:00 PM, 8:00 PM, 11:00 PM
Mountain Time: 12:00 noon, 7:00 PM, 10:00 PM
Pacific Time: 11:00 AM, 6:00 PM, 9:00 PM
April 2nd, 2014
 MGM Targets has released a new polymer version of its popular alloy Switchview Speed Lever for optics. The new Eagle Eye Switchview Lever functions just like the Gen 1 aluminum versions, but at less than half the price. The polymer SwitchView costs $24.99 vs. $59.95 for alloy. Both models allow rapid, positive adjustment of scope magnification. But the big advantage of the new polymer version is UNIVERSAL Fit. The polymer Eagle Eye SwitchView easily adjusts to fit virtually any variable-power scope. It simply and securely attaches around the scope magnification ring.
The Eagle Eye Switchview is injection-molded from Zytel 66 (aka Nylon 66). This material is widely used in the firearms industry for Glock pistol frames and many other firearms components. The material was selected for its durability and temperature stability — it will not become brittle in cold or overly flexible in the heat. Nylon 66 is also resistant to breakdown due to chemical exposure.
Polymer Switchview Version Designed for General Use
Travis Gibson, MGM Vice President, tells us: “The Eagle Eye Switchview lever was specifically engineered to be a magnification adjustment lever for pistol, rifle, and spotting scope optics, and was extensively tested for just this purpose. It is not a re-purposed fishing reel holder, cable tie, or wine bottle opener. The polymer Eagle Eye Switchview lever was designed from customer feedback to be a bit less rigid than the aluminum alloy Switchview. When compared to the alloy models, on initial installation the lever may seem a little ‘springy’. This is by design, to allow for movement if the lever was to be accidentally bumped on a tree, or while being transitioned in and out of gun cases, vehicles, etc. and not transmit impact to the magnification ring and scope. While rigorous tests and evaluations in the field have proven it to be extremely reliable, the primary intent for the Eagle Eye Switchview is for use on hunting type rifles, and not necessarily ‘work guns’ or ‘hard use’ guns such as with military and law enforcement.”
As with all MGM Targets products, the Eagle Eye Switchview™ lever is made in USA. Every kit includes:
One MGM Eagle Eye Switchview lever, two universal fit clamp straps, connection screws, and wrench.
April 1st, 2014
 Here’s big (and small) news for reloaders — get ready for smaller powder containers. The U.S. Department of Transportation (DOT) recently approved new smaller containers for shipment of smokeless powder. The new containers are designed to hold 1000 grains, exactly one-seventh of a pound. That works out to 2.29 ounces of powder — quite a bit less than you are getting currently with one-pound (16 oz.) containers.
Here how it works out:
7000 grains = 1 pound = 16 ounces
1000 grains = 0.143 pounds = 2.29 ounces
Many products — from cereal boxes to Snickers bars — have been down-sized in recent years. Now downsizing has come to the powder marketplace. The strategy behind the smaller containers is simple. In a market where demand vastly outstrips available supply, the smaller containers allow powder-makers to generate more revenue with a given amount of powder inventory. Will consumers accept the smaller powder containers? Probably so — 1000 grains is enough to load 20-22 rounds of .308 Winchester. In the current marketplace (with many powders virtually impossible to find), most consumers would probably prefer to get 2.3 ounces of their favorite powder, rather than nothing at all. (NOTE: The major powder suppliers will continue to offer popular powders in 1-lb, and 8-lb containers. The new 1000-grain containers will be phased-in over time, as an alternative to the larger containers).
Why the small bottles? One industry spokesman (who asked not to be named) explained: “We’ve had a severe shortage of smokeless powder for nearly two years. The powder production plants are running at full capacity, but there’s only so much finished product to go around. By moving to smaller containers, we can ensure that our customers at least get some powder, even if it’s not as much as they want.”
Why are the new containers 2.3 ounces rather than 8 ounces (half a pound) or 4 ounces (one-quarter pound)? One of the engineers who helped develop the new DOT-approved container explained: “We looked at various sizes. We knew we had to reduce the volume significantly to achieve our unit quantity sales goals. Some of our marketing guys liked the four-ounce option — the ‘Quarter-Pounder’. That had a nice ring to it, but ultimately we decided on the 1000 grain capacity. To the average consumer, one thousand grains sounds like a large amount of powder, even if it’s really only 2.3 ounces. This size also made it much easier to bundle the powder in six-packs. We think the six-packs will be a big hit. You get nearly a pound of powder, but you can mix and match with a variety of different propellants.”
Less Bang for Your Buck?
We’re told the new 2.3-ounce powder bottles will retail for around $8.50, i.e. about $3.70 per ounce. At that price, it may seem like you’re getting less bang for your buck. Currently, when you can find it, high-quality reloading powder typically sells for $25-$30 per pound (in 1-lb containers). At $30 per pound, you’re paying $1.88 per ounce. That means that the new mini-containers will be roughly twice as expensive, ounce-for-ounce, as current one-pounders ($3.70 per ounce vs. $1.88 per ounce).
 Why is the DOT getting involved in powder packaging? Well, powders are considered hazardous materials, subject to many rules and regulations. Before a powder manufacturer or distributor can ship any propellant, all the hazmat packaging has to be first approved by the DOT to ensure safe shipping.
Along with the 2.3-ounce containers, the DOT has approved “six-pack” consolidated delivery units that will hold six, 1000-grain containers. Some manufacturers plan to offer “variety packs” with a selection of various powders in the 1000-grain bottles. Wouldn’t it be cool to have a six-pack with H322, H4895, Varget, H4350, H4831sc, and Retumbo?
March 27th, 2014
Are you ready for the 2014 NRA Annual Meetings? The 143rd NRA Annual Meetings and Exhibits will be held at the Indiana Convention Center in Indianapolis, April 25-27, 2014. This will be a huge event, attracting thousands of NRA members. The NRA Exhibits is a smaller version of SHOT Show, with over 600 exhibitors lined up in 400,000+ square feet of exhibit hall space. You’ll find products from every major firearms manufacturer in the country, plus accessories, outdoor gear, and more.
Along with the political speeches, there will be educational seminars, celebrity appearances, and even an indoor air-gun range. You can view priceless “investment-grade” firearms in the NRA’s gun collector area, or book a hunt from a dozens of leading outfitters and guide services.
 Get Free NRA 2014 Mobile Apps
To help you organize your visit to the NRA Annual Meetings and Exhibits, the NRA has created FREE Apps for mobile devices. There are versions for iPhones and iPads, Android devices, and even Blackberries. These handy apps make it easy to plan your agenda and locate exhibitors. The Apps even have an interactive floor-plan (site map), so you can map out your “plan of attack” in advance. Here are key App features:
Interactive Floor-plan
Exhibitor List & Descriptions
Set ‘Favorites’ and Take Notes
New Products & Product Categories
Complete Schedule of Events, with Workshops, Seminars and Tickete Events.
| For iPhone/iPad |
For Android OS Devices |
 |
 |
March 20th, 2014
 High Power and F-Class shooters have a ton of gear they need to carry out to the firing lines. To do the hauling, you can certainly purchase a factory-made, purpose-built cart that folds up and has all the bells and whistles. The Creedmoor Sports CRC-1 (photo right) is a proven, quality product that works great. You’ll find these used by top shooters at Camp Perry. But the Creedmoor CRC-1 cart costs $499.95.
For a tenth that price ($49.99), plus a few dollars more for do-it-yourself enhancements, you can have a heavy-duty cart that will haul all your gear just fine, though it doesn’t fold up.
 Check out the Harbor Freight Welding Cart, item #65939. This cart is ON SALE right now for just $49.99. Overall size is 29-1/2″ L x 20″ W x 49″ H, and width between side rails is 18″. The wheels (with tires) are 20 3/4″ in diameter for smooth rolling. Consider that, if you made your own cart from scratch you could easily pay $30.00 or more just for the large-diameter wheels and axle. Do note — this cart has air-filled tires. Be sure to inflate before you go to the Range!
As sold, the Harbor Freight Welding Cart isn’t ideal for range use. But with a few bungee cords (and some creativity), the cart can be adapted pretty easily to hauling your gun gear. Check out this example we saw at the Berger Southwest Nationals. It’s carrying a rifle in hard gun case, bipod, folding chair, shooting mat, tripod, spotting scope, rear sand-bag, and ammo box. If you want to enhance the basic cart, it’s easy to add plastic side-panels on the bottom unit, and fit a barrel-holding system on the cross-tube. This ensures rifles and gear won’t flop forward. (A small piece of wood under the bottom panel provides a bit of extra lift that will keep the bottom plate out of the dirt and gravel.)
Click Photos Below to Zoom
 
How to Upgrade Welding Cart for Range Use
Get a block of hard foam rubber. Cut keyhole slots in the rubber to grip the barrel and umbrella/scope stands. Mount the rubber block to the cross piece with self-tapping screws, or drill a horizontal channel in the rubber so the whole block fits over the cross-tube. On the lowest leading edge of the welding cart box (at ground level, front), fit a block of wood 2″ high (you can also fabricate metal extensions). This will make the cart lean back a little more, which helps stabilize the contents on sloping terrain.
 You may want to enclose the sides of the bottom box area so small items don’t fall out. You can tack-weld aluminum side-plates if you want a fancy appearance. I prefer to just cut sheet plastic from a home improvement store. These plastic panels can be attached with screws or even zip-ties around tubing.
Run the plastic side panels up high enough that stuff like hats and muffs don’t fall out. After transport you can transfer ammo boxes and small items to the upper box (attached to the back side of the cross-tube).
The hardest component to find may be the hard rubber blocks for the barrel keeper, but you can also make a barrel-holding block out of wood, with some carpet to protect the barrels. The nice thing about the rubber is that it can be cut to snap over the barrels so you don’t need straps. Likewise, you can drill a hole transversely through the rubber, then slot it from the bottom and it will slide over the horizontal tubing with no fasteners needed.
Comment: This cart is heavy and it takes up a lot of space. You’ll need a station wagon, SUV or pickup truck to haul it around. But it’s cheap. The money you save on a range cart could pay for a new Krieger or Bartlein barrel, AND some new brass. Those things (new barrel and brass) will likely improve your scores more than having a fancy $500.00 range cart.
March 20th, 2014
This new tool trims cases quickly, with precision control over case length via a micrometer-type dial. The folks at ACT Tactical have developed an easy-to-use compact case trimmer called the TRIM-IT. Crafted from 6061-T6 aluminum, this sturdy case trimmer comes with a 100% lifetime guarantee. The $97.50 TRIM-IT features a micrometer that’s built into the unit itself. Caliber-specific inserts (called “Caliber Dies”) index off the case shoulder.
The TRIM-IT can work with any hand-drill or drill press. Once you get the hang of it, you can trim a case in 7-8 seconds — that gives you a production rate of 400+ cases per hour. The TRIM-IT delivers repeatable precision to plus/minus one-thousandth. This unit also holds its cut-length setting, unlike some other trimmers which require frequent adjustment.
The basic unit ships with two caliber dies, for .223 and .308. Other listed caliber dies include 6.8 SPC, .300 BLK, .30-06, 30-30 Win, 300 Win Mag, 7MM REM, 7.62x54R, and 8MM Mauser. Other cartridge types can be custom-ordered from EZTrimit.com. To change dies, simply loosen the set screw on the TRIM-IT, take the caliber die out, add another one, and tighten the screw — quick and easy.
The built-in micrometer is great. The handy dial gives you a positive, repeatable length setting quickly — no fiddling with locking rings or spacers. Once you get the ring set properly, the cut lengths are consistent from the first case to the last. Expect your case OAL spread to be about +/- .001″ (starting with full-length-sized cases with uniform rim to shoulder lengths). For more information, email sales [at] eztrimit.com or call (562) 602-0080. You can see how the Trim-It device works in the video below.
Video Shows Trim-it Set-Up and Operation
March 11th, 2014
If you like sweet-shooting .17 HMR rimfire rifles, and appreciate fine German engineering, then you’ll love the Anschutz model 1727. Rarely seen on American shores, this is the only varmint rifle in the world using the super-fast, straight-pull Fortner action. Developed for Olympic Biathlon competitions, the Fortner action can be cycled in the blink of an eye. Just pull back the side-lever with your forefinger and then snick the bolt back with your thumb. This slick-cycling action has been used for many years in biathlon rifles, but the model 1727 is the first example of a Fortner varminter.
Our friend Steven Boelter, author of the Rifleman’s Guide to Rimfire Ammunition, has been able to test the Anschutz model 1727 extensively, both from the bench and in the field. Steven has published an outstanding online review of the model 1727, lavishly illustrated with great photos that show all the details of this unique firearm. We strongly recommend you visit Boelter’s Rimfire Research & Development Website (RRDVegas.com) and read his Anschutz 1727 Review.
Click Photo to Read Anschutz 1727 Review by Steven Boelter
After bench-testing the model 1727 for accuracy, and then using it on a ground squirrel safari, Boelter came away hugely impressed with this unique .17 HMR rifle:
The 1727 is truly a masterpiece; there really is no other way to look at it. I can’t think of any other rimfire action which remotely comes close in design or function, and executed at this level of precision.
The 1727 combines the accuracy of a single-shot match rifle, provides the convenience of a four-shot repeater, and cycles with nearly the speed of a semi-auto without fear of a dreaded case failure or “Ka-boom”. There’s really nothing else to say about the rifle. With virtually no short-comings in design or function, superb field performance and overall accuracy, it’s to be considered a 10 out of 10.
The only downside, Boelter explains, is the price: “The rifle alone has a suggested retail price of $3,500. When you add a nice set of Talley rings and bases along with a sharp Leupold scope, you’re approaching $5,000 USD. It’s completely out of reach for the majority of varmint hunters, and that is a shame.”
Anschutz 1727 Video Review from Australia. Amazing 50-yd accuracy at 12:00 time-mark.
Story tip by Boyd Allen. We welcome reader submissions.
March 11th, 2014
The March edition of Target Shooter Magazine is now available. Content is free — you don’t have to purchase a subscription. This month there are many interesting featured articles, including a lengthy report from SHOT Show, and an article on tuning the 6 PPC by noted gun writer James Mock.
Here’s one of the many new products featured in Target Shooter’s SHOT Show Report — a new kind of chronograph. You haven’t seen anything like it before, because it is the first Doppler Radar chronograph for general (civilian) use. Produced in Canada, the new MyLabradar chronograph can be positioned off to the side — the bullet does NOT have to be fired directly over a set of sensors. That’s a big deal — no more risk of killing your chrono when testing ammo. You just aim at the target, with the chrono placed a few yards to the left or right.
IWA Report Coming Soon from Target Shooter
The editors of Target Shooter note that new articles are added throughout the month, so visit www.TargetShooter.co.uk frequently to see new content. The big IWA trade show (the European version of SHOT Show) took place March 7-10 in Nuremberg, Germany. Target Shooter will provide a report: “Coming soon will be all the latest news from IWA — where our Editor spent four days searching around the exhibition for new and exciting products.”
March 10th, 2014
 Leica just released an inline power-booster (1.8X Extender) for its APO-Televid spotting scopes. Brilliant! That’s a great accessory we would like to other spotting scope makers offer as well. Hopefully we’ll see the other major brands — Kowa, Nightforce, Nikon, Pentax, Swarovski, Vortex, Zeiss — follow Leica’s lead.
With Leica’s new 1.8X Extender combined with the 25-50X eyepiece, the effective magnification range is 45-90X. That’s right — you can boost the high-end magnification from 50X all the way to 90X. In good viewing conditions (with a solid tripod), we have found you really can use 80+ power or higher on a spotting scope to resolve very small bullet holes at long range. With its 1.8X Extender in place, Leica now offers the greatest magnification of any premium spotting scope. According to the German company: “Leica is the world’s only manufacturer in the premium spotting scope segment to offer such an additional eyepiece for an existing angled spotting scope and such extreme magnification.”
The optical system of the 1.8X Extender consists of a two-lens achromat that mounts securely with an integrated bayonet mount locking mechanism. With the simple push of a button and a quick turn of the wrist, the Extender 1.8x can be quickly and securely mounted between the APO-Televid angled spotting scope and the eyepiece. (NOTE: the 1.8X Extender only works on Leica’s angled spotting scopes — there is no straight version). Leica designed the new 1.8X Extender to be optically, mechanically, and ergonomically matched with the APO-Televid spotting scopes to work flawlessly as a modular kit. MSRP for the 1.8X Extender is $449.00.
March 9th, 2014
Shooting heavy-duty steel targets is fun, and it’s a great way to practice your long-range skills, IF the target is the right size AND if it’s situated at appropriate distances. Unfortunately, many ranges don’t have steel rifle targets, or if they do, the targets are big gongs fixed in place. You can bring your own steel gongs to the range, however most setups are big, heavy, and hard to transport. Gongs are typically held by chains attached to very heavy, sawhorse-style supports that take two people to move.
Now there is a portable steel target plate that is relatively easy to move, and which is available in appropriate sizes for precision rifle shooters. The AR550 heavy-duty version of the Evil Roy Practice Target from GSS Competition works great for precision rifle practice at distances beyond 100 yards. And you can use the same plates for pistol practice at shorter distances. To reduce the chance of ricochets, there are no exposed bolts or clamps, and the target plate head is angled. When using the targets with rifles you want to avoid any bullets with penetrator tips, and GSS recommends keeping velocities under 3,000 fps. That still allows you to shot .308s, 6BRs, 6.5x47s, and .284s at competitive match speeds.
Choose from 6″, 8″, 10″ or 12″ Plate Diameters
The GSS circular targets, made from AR550 armor plate, come in four diameters: 6″, 8″, 10″, and 12″. We like the 6″ size for shooting at 600 yards, and the 10″ plate for 1000 yards. These sizes are very close to 1 MOA at those distances. This provides a good challenge for an F-Class or high power shooter. The circular plates can be mounted at two different heights, up to roughly 36 inches above the ground. The head of the Evil Roy Target will “bounce” a little when you hit it, so you get instant feedback.
HD Target Costs $175.00 — FREE Shipping for Limited Time
The GSS “Evil Roy” target plates are supported on a folding three-legged steel stand. This tripod base folds up to a 3-foot-long package for ease of carry and transport. NOTE: No tools are required for assembly, use, or storage. The portable stand folds to less than 3 feet long in just seconds, so it easily fits in the trunk of a small car. The GSS Evil Roy portable steel targets start at $155.00 plus $20.00 for the heavy-duty option. For a limited time, GSS is offering FREE Shipping on its steel targets (offer subject to change.) For more info, visit www.GSSCompetition.com.
|
