So many options… How do you select the shooting discipline that’s best for you? Of course, “Fun is number one”. But you also need to consider cost — the “bang for the buck”. Or in more scientific parlance, the “Fun to Cost Ratio”. Yes, shooting a .50 BMG is fun, but you could be spending as much as $5.00 per round for factory loads! By contrast, your cost per shot in a rimfire fun match might be well under ten cents, as decent ammo can be easily found for under $5.00 per 50-count box. Five bucks per box (of fifty) sure beats five bucks per round!
We believe in the benefits of rimfire cross-training. With a rimfire rifle that has the same ergonomics and “feel” as your centerfire rig, you can practice more often and more affordably. You can get decent rimfire ammo now for as little as seven cents per round*. Compare that to centerfire factory ammo at $1.40/round or handloads for about $0.70 (bullet, primer, powder, and brass depreciation). So even your handloads could cost TEN times as much as pretty good rimfire ammo. That’s an order of magnitude boys and girls.
For a tactical cross-trainer, you want a rimfire rig that feels like your centerfire rifle. McMillan now offers a stock that fits the bill. McMillan’s new A5-22 stock shares the same look and feel as McMillan’s popular A5 centerfire stock. The A5-22 is able to accommodate 10/22 type actions including KIDD 10-22 models with rear tang attachments. McMillan says: “The A5-22 is dimensionally the same as our standard A5 with some minor changes in the tang and floor plate areas. It is available in a fixed comb configuration or with an adjustable saddle-type cheek piece.”
A used Biathlon trainer works great for rimfire practical matches. This is the Anschutz Model 64-R. Note magazine caddy on forearm. This rifle was a dream to shoot.
Targets for Rimfire Training and Fun Matches
Here’s a rimfire training target with “big to small” target circles. Start with the largest circles, then move to the smaller ones in sequence. This systematic drill provides increasing challenge shot-by-shot. Novices often are quite surprised to see their accuracy improve as they move from bigger to smaller aiming points. That provides positive feedback — always a good thing.
Right Click and “Save as” to download printable PDF versions of target.
Rimfire Practice Targets
SPECIAL BONUS–Rimfire Tactical Precision Targets
These FREE targets by DesertFrog are offered in Adobe Acrobat format for easy printing. CLICK HERE to download all six targets as a .ZIP archive.
Game Theme Commercial Targets — Fun and Colorful
Here are some colorful commercial fun targets, well-suited for rimfire practice. These game-theme targets from Champion should be very popular with kids. You can blast aerial drones, hunt dinosaurs, play a game of “H-O-R-S-E”, or shoot ducks in a Carnival Shooting Gallery. These targets, which cost $5.45-$5.95 per 12-pack, are ideal for younger shooters in your family (and fun for grown-ups too).
* We recently scored 1500 rounds of Norma Match-22 ammo for $99.99 from MidwayUSA. That’s 6.6 cents per round! That deal is gone, but there are other bargains to be found. Use WikiArms.com to find .22LR rimfire ammo bargains.
If you have an older version of QuickLOAD, such as V3.1 shown above, then you should definitely upgrade. This will give you more complete and up-to-date cartridge, powder, and bullet data files.
Got QuickLOAD software? Then it’s time to upgrade your data files — new data became available in January 2018. The makers of QuickLOAD offer inexpensive CDs with updated data files (for propellants and projectiles). These data update CDs will add the latest available powder, cartridge, and bullet files to your current version of QuickLOAD/QuickTARGET.
There are two update CDs now offered with data current through January 2018. One handles the older installations, QuickLOAD/QuickTARGET 3.0, 3.1, 3.2, 3.3, 3.4, and 3.5. A second update CD works for QuickLOAD/QuickTARGET 3.6, 3.8, and early 3.9. This second disk is primarily a data update.
Price for either update disk is $15.95. In North America, order from Neconos.com, or call 800-451-3550 (9 am to 5 pm Pacific Time). In the United Kingdom, you can get the update disk from JMS Arms, Merrivale, London Road, Handcross, West Sussex, RH17 6BA, England, Phone: 01444 400126. In Europe you can order direct from QuickLOAD’s creator: Ing. Hartmut Broemel, Neubrecker Weg 15, D-64832 Babenhausen, Germany, fax/phone (+49) 0 6073 688481
QuickLOAD is a pretty amazing program. Using information for over 1200 cartridges, 250 powders, and 2500 bullet types, QuickLOAD allows you to predict velocities and pressures for your hand-loaded ammo. You can check predicted pressures with different powder choices and seating depths before loading an actual round. If you do not yet own QuickLOAD, you can now order the latest Version 3.9 of this unique software. Priced at $152.95, the latest version 3.9 contains all the updates through January, 2018 and is compatible with WINDOWS 2000, XP, VISTA, Windows 7, Winows 8 and Windows 10. QuickLOAD/QuickTARGET 3.9 can be purchased for $152.95 from Neconos.com. For a full explanation of the features and benefits of QuickLOAD software, click the link below.
EDITOR’S Comment: We believe every serious rifle hand-loader should own and use QuickLOAD. We have used this program for over a decade. It is invaluable in load development, particularly when testing a variety of bullets and when changing seating depths. This software is NOT a substitute for standard, conservative reloading practices. However QuickLOAD can very surprisingly effective in comparing cartridge performance and predicting the effects of changes in charge weight.
Product tip from EdLongrange. We welcome reader submissions.
Before you load that nice new cartridge brass for the first time, run an expander mandrel down the case necks. This will iron out dents and provide more uniform neck tension. Chose a mandrel diameter that provides appropriate neck tension.
Lapua brass is so good that you’ll be tempted to just load and shoot, if you have a “no-turn” chamber. However, some minimal case prep will ensure more uniform neck tension. Keeping your neck tension very uniform allows more consistent bullet seating. That, in turn, usually yields better accuracy, and lower Extreme Spread and Standard Deviation (ES/SD). Lapua brass, particularly 6mmBR, 6.5×47, 6.5 Creedmoor, and .308 Win comes from the factory with tighter-than-optimal necks. Before you seat bullets, at a minimum, you should inside chamfer the case mouths, after running an expander mandrel down the necks. The expander mandrels from both Sinclair Int’l and K&M will both leave the necks with enough neck tension (more than .001″) so you can then seat bullets without another operation. We suggest putting a bit of lube on the mandrel before running it down the necks — but remove any lube that gets inside the necks before seating bullets.
Both Sinclair and K&M Tools make a die body specifically to hold expander mandrels. The Sinclair version, is shown above. This $28.99 unit fits caliber-specific expander mandrels ($9.99) which measure approximately .001″ less than bullet diameter for each caliber. This is an updated “Gen II” design that completely captures the mandrel within the die so the mandrel cannot pull out. It also has an O-ring in the die cap that allows the mandrel to self-center within the case neck. Sinclair now offers three sizes of die bodies for expander mandrels: .17 -.338 Caliber (#749-011-715WS); .357 – .50 caliber (#749-008-843WS), and a special .50 Cal die body for large-diameter 50 BMG presses (#749-009-163WS, $39.99). All Generation II dies are machined from stainless steel and the standard diameter 7/8-14 dies include the Sinclair Stainless Steel Split Lock Ring.
Once you run the Sinclair expander mandrel down the necks of Lapua brass, after you account for brass spring-back, you’ll have about .002″ neck tension*. This will make the process of seating bullets go much more smoothly, and you will also iron out any dents in the case mouths. Once the case mouths are all expanded, and uniformly round, then do your inside neck chamfering/deburring. The same expander mandrels can be used to “neck-up” smaller diameter brass, or prepare brass for neck-turning.
Forum member Mike Crawford adds: “These expanders can also reduce runout from offset seating. Prior to bullet seating, expand the sized necks to force thickness variance outward. With the Sinclair system, the necks will springback fine, and will not be pulled out of center. This leaves plenty of tension, and bullets seated more centered. I do this, even with turned necks, to get improved seating.”
Mandrels vs. Expander Balls on Decapping Rods
If you haven’t acquired an appropriate expander mandrel for your brass, but you DO have a full-length sizing die with an expander ball, this will also function to “iron out” the necks and reduce tension. However, using a die with an expander ball will work the necks more — since you first size them down, then the ball expands them up again. Typically (but not always), run-out is worse when using an expander ball vs. an expander mandrel.
* This .002″ tension is what we have observed with Lapua 6mmBR, 6.5×47, 6.5 Creedmoor, and .308 Win brass. This might vary with much smaller or larger cases, and of course a different brand of brass might yield different results. If you get too little tension with your current mandrel, you can get a smaller-diameter mandrel from 21st Century Shooting. 21st Century even offers low-friction Titanium Nitride-coated mandrels.
Here’s a good deal if you are looking for a new optic for your hunting or match rifle. For the next month, April 15 through May 15, 2018, Zeiss is running a great promotion on its latest Conquest V4 optics line. The Zeiss annual “Tax Refund Days” promotion cover the entire Conquest V4 family of riflescopes. These are 1-4x24mm, 3-12x56mm, 4-16x44mm, and 6-24×50 models, which range from $799.99 – $1199.99 MSRP. Purchase any of these Conquest V4s and receive a $100.00 immediate in-store accessory credit at time of purchase. Take advantage of this promotion through participating Zeiss Authorized Sports Optics retailers throughout the United States. This applies to online purchases as well — you just apply the $100.00 credit to other products the online seller offers.
“The Conquest V4 riflescopes are getting lots of attention and praise” says Barton Dobbs, Director of Sales for Carl Zeiss SBE, LLC Sports Optics. “We listened to our customers as to what they want and demand from a scope in this price category, and we enjoy hearing how much these customers like the modern features and the high level of performance the V4’s provide.” NOTE: Quantities are limited. To locate a participating retailer, or to find out more about Zeiss products, visit Zeiss Sports Optics.
Positive Feedback from Canadian Customers on Zeiss Conquest V4 Riflescopes Precision Optics, a Canadian scope vendor, says buyers been very pleased with Conquest V4 scopes: “We have placed a LOT of the Conquest V4 and V6 riflescopes recently and can report overwhelmingly positive feedback.”
Accoring to Precision Optics, customers who have field-tested Conquest V4 scopes have consistently reported the following:
The scopes are lighter than expected, considering they have a 30mm tube and are very robust.
The optical performance is outstanding, and compares directly with the Zeiss Victory products, and indeed the Conquest V4/V6 products utilize the same coatings. Users report that … the V4 glass is clearer and brighter than Nightforce SHV/NXS products.
The V4 and V6 turrets track and are repeatable. Customers have run side-by-side tests and report that the V4/V6 scopes track just accurately as a Nightforce NXS[.]
Do you own an M1 Garand? Or perhaps you’re thinking of ordering a Garand, now that the CMP recently received 99,000 of these classic battle rifles — returns from Turkey and the Philippines. An M1 Garand is a great addition to anyone’s personal firearms collection. It is a piece of living history — plus it can be used in Vintage Military rifle matchers. Here are some resources for M1 Garand owners. There are marksmanship tips, plus helpful advice on maintaining your M1 Garand.
Rifle Marksmanship with the M1 Garand Rifle
The film was made in 1942/43 for the War Department. It shows shooting positions and holding techniques for the M1 Garand. This informative video will help both novice Garand shooters as well as experts seeking a “refresher course”. The film focuses on the M1 Garand but the techniques can be applied to any rifle. The narration sounds a bit “corny” by today’s standards, but focus on the techniques shown and you’ll learn plenty.
M1 Service and Maintenance
Shooting Sports USA has published an excellent article on Service and Maintenance of M1 Garand Rifles. This covers basic cleaning and servicing and also explains how to upgrade the performance of your Garands. READ Article HERE.
This popular Tips and Tricks Video has been viewed over 500,000 Times on YouTube.
Recommended M1 Garand Manual
Among the many M1 Garand manuals available, we recommend the CMP’s U.S. Rifle, Caliber .30, M1: ‘Read This First’ Manual. This booklet covers take-down, reassembly, cleaning, lubrication, and operation. The manual comes with CMP rifles or can be purchased for $3.50 from the CMP eStore. The author of Garand Tips & Tricks says: “It’s one of the best firearms manuals I’ve seen and I highly recommend it.” The CMP also offers many other M1 Garand print resources including:
The American Federation of Teachers (AFT) plans to boycott Wells Fargo unless that bank stops doing business with the NRA and gun makers. AFT President Randi Weingarten stated: “We’re issuing Wells Fargo an ultimatum — they [sic] can have a mortgage market that includes America’s teachers, or they can continue to do business with the NRA and gun manufacturers. They can’t do both.” The AFT has publicly stated that if Wells Fargo continues to support firearms businesses and the NRA, the AFT will discontinue its popular Wells Fargo mortgage program offered to teach union members. According to Bloomberg, Wells Fargo has loaned more than $430 million to firearms companies over the years. Wells also operates accounts for the NRA.
Report by Dave Dolbee of Cheaper Than Dirt Blog
Last week, the AFT released correspondence between Weingarten and Wells Fargo President Tim Sloan. The release outlined the union’s concerns about Wells Fargo’s connections with the NRA — as well as its threat to stop offering Wells Fargo mortgages, if Wells Fargo continues being the NRA banker. The Wells Fargo mortgage program is part of the Union Privilege program. More than 20,000 AFT members currently hold mortgages through the program.
If Wells Fargo fails to meet the AFT’s demands, the AFT says it will push other Union Privilege organizations to boycott Wells also. The AFL-CIO was copied on the AFT’s demands to Well Fargo.
AFT President Weingarten declared: “The lives of students and educators must be valued more than guns. This is America — Wells Fargo has the right to be the NRA banker, but we have rights too. That’s why if Tim doesn’t ditch his guns business, we’ll ditch Wells Fargo. No words will dissuade us from our view that our society must value people over profits. We have a responsibility on behalf of our members and their students who face potential gun violence every day.”
Dave Dolbee asks some key questions about this AFT ultimatum: “I wonder how the members of the ATF feel about the move. I mean, did the membership vote for this?” Dolbee wonders if the interests of the majority of AFT members are really being served by this boycott, or whether an extremist policy has been adopted based on the political viewpoints of a handful of AFT leaders.
Points to Ponder — Guns vs. Cell-Phones
While the events in Parkland, Florida were tragic, and the nation must develop strategies to prevent the recurrence of such incidents, there are other risks to young students that may be statistically far more significant than gun violence. Newsday.com reports that over 3000 school-age teens die every year in vehicle accidents caused by texting while driving. Another 300,000 teens are injured in texting-related driving accidents.
That works out to 54 teen deaths per week from texting while driving. That is three times the Parkland HS death toll. Will the AFT teachers’ union demand that Wells Fargo stop doing business with smart-phone manufacturers or cellular providers? By distracting teen drivers, cell phones kill countless more students every year than do firearms. So which problem truly deserves more attention from policy-makers?
For many, the NRA Annual Meetings and Exhibits is all about the Second Amendment and politics. For others, the main appeal is the Exhibit Hall, with its countless firearm displays and outfitter booths. There will be lots to see this year in Dallas, but just about the most fun you can have at the NRA Convention will be at the Pyramyd Air shooting gallery.
Pyramyd’s Air Gun Range was a hit last year in Atlanta and is set to be a top destination for the entire family at the 147th NRA Annual Meetings and Exhibits in Dallas, Texas. With 16 stations and more than 200 hundred interactive targets, the range will provide shooters of all ages the chance to try out some of the newest and best airguns available. From entry-level break-barrels to high-end, precision air rifles and target pistols, there will be a full range of options.
One NRA range officer noted: “If you see a long line there [at the Dallas Convention Center], odds are that it’s for the air gun range. We have boys and girls, moms and dads, everyone waiting to plink the day away.”
The Air Gun Range is not just for youngsters. Adults can have fun too.
The Pyramyd Air Air Gun range will operate in the Kay Bailey Hutchison Convention Center. We expect it will operate Thursday (May 3) from 2:00 to 6:00 pm; on Friday and Saturday from 8:00 am to 6:00 pm; and on Sunday from 8:00 am to 5:00 pm. But schedule is subject to change.
At the Air Gun Range, you’ll find air rifles and air pistols from: Air Arms, Air Force, Air Venturi, Ataman, Beeman, Browning, BSA, Colt, Crosman, Diana, Kral Arms, SIG Sauer, Umarex USA, and Walther.
Here are two of the precision-type air rifle that will be at the AirGun Range. On top is the Air Arms S400 MPR Precision. On the bottom is the bullpup-style Kral Arms Puncher Breaker SideLever PCP:
The Pyramyd Air Perspective
A long time partner in this experience, Pyramyd sees the NRA Air Gun Range as more than marketing opportunity. “We’re focused on increasing the number of shooters and involving people of all ages in the shooting sports,” said Pyramyd founder and owner Joshua Ungier. “For Pyramyd Air, it isn’t just a business – it’s a passion.”
OK, admit it — you’ve always wondered how they get those color swirls and camo patterns in McMillan stocks. (You’ll be surprised at the answer). And how does McMillan manage to inlet stocks so precisely for so many different action types?
McMillan Stocks is one of the leading fiberglass stock producers, cranking out 8,000-10,000 stocks every year for hunters, target shooters, and members of the military. McMillan employs state-of-the-art, high-tech machinery. At the same time, many processes are still done by hand — such as applying colors to the stocks.
In the videos below, Kelly McMillan hosts Bob Beck of Extreme Outer Limits TV in a tour of the McMillan stock-making facility. We think all avid “gun guys” will be fascinated by these high-quality videos.
McMillan Custom Stock Production
The first video shows the stock-building operation from start to finish — You’ll see the lay-up, color application, molding, and “stuffing”. Watch carefully at 0:16 to see colors being applied.
The Range Station, an accessory case with roll-out shooting mat, provides useful storage plus important protection for your handguns at the range.
Here’s a smart new product we like for pistol sessions. The Range Station case combines an ammo compartment with a roll-out mat. Great idea. Some gun ranges only have concrete benches, or shooting stations with horizontal surfaces covered with dirt, powder residues, and other debris. You don’t want to put your $2000 blued Colt Python on that mess.
Manufacturer Real Avid says: “This intelligent solution has a place for everything. The 12×24” padded mat stays put on the counter-top and holds guns and gear. The case snaps to either the right or left side of the mat. Interior trays are sized for standard ammo boxes and magazines. And special compartments hold smaller range gear such as rulers, pens, target markers, and more. When finished, the mat can be rolled and stored neatly and compactly in the case for next time.”
Range Station Features: 12″x24″ Padded Gun Mat with Non-Slip Back | Mat Top Coating Repels Oils & Solvents
Interior Holds Ammunition Boxes | Tray for Magazines and Small Accessories
Mat Rolls Right Back into Case | Case Fits Most Range Bags
Gear Organizer with Roll-out Gun Mat
The Avid Range station is a versatile case that holds your ammunition along with a built-in 12″ x 24″ mat. The Range Station’s protective mat quickly rolls out and has a coating to repel oils and solvents, providing a clean surface to lay your pistol or revolver at any range. The durable, molded case doubles as storage for common range gear and has room to store additional ammo for reloading magazines at the line. This smart Range Station fits the vast majority of range bags, and is affordable, with a $29.99 MSRP.
Dan Zimmerman of ConcealedNation.org tested the Range Station and liked it, confirming that “When opened, the case is perfect for holding extra magazines, tools and plenty of ammo. When closed, the thing fits neatly in most range bags.” Here is a photo from Dan’s test:
The Civilian Marksmanship Program (CMP) does more than run matches and sell surplus firearms. The CMP also operates a full-service Custom Shop in Anniston, Alabama that does maintenance, repair, and upgrading of USGI-issue rifles at a reasonable cost.
Since the fall of 2013, the CMP Custom Shop has offered repair, upgrade, gunsmithing and custom services for a wide range of U.S. Military rifles, specifically those issued in early eras. As well as regular repairs and troubleshooting, the CMP Custom Shop can upgrade, accurize, and refinish virtually all the rifle types sold by the CMP.
What Rifles Can the CMP Custom Shop Service?
The CMP Custom Shop will work on the M1 Garand, M1 Carbine, 1903/1903A3 Springfield, 1917 Enfield, and the Krag. The Custom Shop will also service Remington 40X, Mossberg 44, and H&R Model 12 rifles. CMP will NOT work on shotguns, pistols, revolvers, M14/M1A, AR15-style rifles or other commercially-produced modern rifles. For a list of services (with prices) visit the CMP Custom Shop webpage.
NOTE: Before you can send a rifle to the CMP Custom Shop you must be a customer on file in the CMP system. Customers must meet the same eligibility requirements as for CMP rifle purchases. Once qualified, you can purchase a rifle from the CMP and have the CMP Custom Shop make modifications to it prior to shipping.
CMP Custom Shop Can Work on USGI Rifles Purchased from Other Sources
The CMP Custom Shop can work on rifles that may have been purchased elsewhere as long as they were made by a USGI contractor. Some examples include: Springfield Armory (not Springfield Inc.), Harrington & Richardson, Winchester, International Harvester, Remington, Rock Island, Eddystone, Inland, Underwood, Rock-Ola, Quality Hardware, National Postal meter, Standard Products, IBM, Irwin-Pederson and Saginaw. NOTE: There are many NON-USGI copies of the M1 Garand, 1903 Springfield and especially the M1 Carbine that CMP will be unable to work on.
For more information, call (256) 835-8455, x1113, or send email to customshop [at] thecmp.org. Shipping and Correspondence address for the CMP Custom Shop is:
Right Click and “Save as” to download printable PDF versions of target.
Got QuickLOAD software? Then it’s time to upgrade your data files — new data became available in January 2018. The makers of QuickLOAD offer inexpensive CDs with updated data files (for propellants and projectiles). These data update CDs will add the latest available powder, cartridge, and bullet files to your current version of QuickLOAD/QuickTARGET.
Pyramyd’s Air Gun Range was a hit last year in Atlanta and is set to be a top destination for the entire family at the 147th NRA Annual Meetings and Exhibits in Dallas, Texas. With 16 stations and more than 200 hundred interactive targets, the range will provide shooters of all ages the chance to try out some of the newest and best airguns available. From entry-level break-barrels to high-end, precision air rifles and target pistols, there will be a full range of options.
OK, admit it — you’ve always wondered how they get those color swirls and camo patterns in McMillan stocks. (You’ll be surprised at the answer). And how does McMillan manage to inlet stocks so precisely for so many different action types?
Gear Organizer with Roll-out Gun Mat
The Civilian Marksmanship Program (CMP) does more than run matches and sell surplus firearms. The CMP also operates a full-service Custom Shop in Anniston, Alabama that does maintenance, repair, and upgrading of USGI-issue rifles at a reasonable cost.
For more information, call (256) 835-8455, x1113, or send email to customshop [at] thecmp.org. Shipping and Correspondence address for the CMP Custom Shop is:
