As the practical/tactical game has evolved, with low recoil and high accuracy becoming ever more important, many top competitors have moved to smaller cartridges such as the 6mm Dasher and its parent, the 6mmBR Norma. These cartridges deliver outstanding accuracy plus good barrel life. However, the “short, fat” 6BR/Dasher design doesn’t feed optimally in magazines designed for the .308 Win family of cases. Yes you can modify your own magazines (Mag Mod HERE), or buy a pricey conversion kit, but now there is a turn-key solution from MDT (Modular Driven Technologies).
MDT’s 6mm BR magazine fits the parent 6mmBR cartridge and all the popular varients including the 6 BRA, 6 Dasher, and 6 BRX. MDT says this new 12-round magazine is a “one-step solution [delivering] smooth, reliable feeding for the most popular rifle cartridges in precision rifle competitions.”
MDT built this AICS-pattern mag for PRS/NRL competitors and anyone wanting to run 6mmBR-family cartridges in mag-fed actions: “The limiting factor for competitors running 6mm BR variants has been feeding. Until now, the only option has been to purchase an AICS-pattern magazine plus an additional kit to make the magazines work with the shorter cartridges. This solution costs upwards of $100 or more and can require additional tuning to work in most rifles.”
The MDT 6mm BR mag has a maximum internal length of 2.580″, which accommodates pretty much any 6mm bullet you’d want to use. These MDT magazines are crafted from quality steel, nitride-treated, then black Cerakote finished inside and out. To reduce friction between cartridge and magazine body, MDT added two internal ribs which provide a smooth transition from double stack to single-feed.
Magazine Conversion — Use .308 Win Mags with Modified Followers
A decade ago we showed our readers how to modify .308 Win magazines to feed the 6mmBR cartridge efficiently. This procedure, explained by Texas gunsmith, Mike Bryant, is easy to do with simple tools. You can modify most standard magazines, both internal-style and detachable style. CLICK HERE for full, step-by-step magazine conversion article.
The basic procedure involves trimming the rear of the magazine, and creating a rear stop with a block from a Remington .223 magazine. Next the .308 Win magazine follower is shortened and beveled. Some guys tweak the feed lips a bit, but this may not be needed. Many of our readers have performed this simple magazine modification and report their rifles feed quite reliably. One reader, who converted a 7mm-08 hunting rig into a 22 Dasher varmint rifle, tells us his modified mag feeds flawlessly.
Share the post "New Magazine for 6mmBR and 6 BR Improved Precision Rifles"
How well can the little 6mm Dasher perform at 1000 yards when the conditions are good, and the shooter is riding a hot streak? Well here’s a shot-by-shot record of Scott Nix’s 4.554″ ten-shot group shot at Missoula, Montana at the Northwest 1000-yard Championship a few years back. All 10 shots were centered for a 100-6X score. That’s about as good as it gets. If Scott had stopped after 5 shots, his group would have been under three inches.
Video Demonstrates Amazing 1000-Yard Accuracy
Watch the video. You can see the group form up, shot by shot. It’s pretty amazing. Scott’s first shot (at the 45-second mark of the video) was right in the X-Ring, and four of Scott’s first five shots were Xs. That’s drilling them! This video was recorded from the pits at the 1000-yard line, during record fire.
Share the post "Amazing 1K Video: 10 Shots in 4.554″ at 1000 Yards (100-6X)"
The 6BR Improved cases have become very popular in tactical competitions. In fact the Precision Rifle Blog reports that the majority of Top 10 PRS and NRL shooters are now running some version of the 6mmBR Norma case — such as the 6mm Dasher, 6BRX, or 6BR Ackley. In fact “40% of those ranked in the top 10 in either league were running a 6mm Dasher”. This short, fat 6BR improved case can push the 100-107gr bullets to 2950+ fps, a well-known accuracy node. Yes the 6mm Creedmoor and 6XC can push heavy 6mm projectiles faster to be sure, but there is a trade-off in barrel life. The 6BR Improved cases represent a “sweet spot” for the tactical game, offering outstanding accuracy, with less recoil than bigger cartridges, including the 6.5 Creedmoor.
The only real downside to the short/fat 6BR-based cartridges is that they can be finicky when feeding from a magazine, at least without some modifications to the follower and feed lips. There are kits that can help with this, but now there is an even better solution — a premium custom action designed specifically to feed the 6mm Dasher (and similar cartridges) from a magazine. This action, the Borden Super Short 6, was recently, unveiled on Facebook by PRS competitor John Hargett. This action, available in both right- and left-hand versions, features a dedicated new Super Short 6 (SS6) magazine optimized for Dasher-sized cartridges. The bolt has a shorter throw than a standard Rem short action. We think this new action could become VERY popular with tactical shooters, and varmint hunters.
John Hargett says: “Installing spacer kits or possibly having a nose dive in full-size .308 mag is in the past! This will fit all 700 stocks and chassis and AICS bottom metal. So no need to change what you are already using. Borden creates a masterful action at an extremely affordable price.”
Key Facts about the Borden Super Short 6 Action and SS6 Magazine:
1. Rem 700 Footprint — The Borden Super Short 6 action is internally tailored to the 6mmBR cartridge and its wildcats, but externally maintains Rem 700 action dimensions. This means the action IS compatible with the stock and chassis you currently own. And, the Borden Super Short 6 comes in both right-hand and left-hand versions, with PVD coating available (on action and/or bolt).
2. Rem Trigger Compatibility — The Borden Super Short 6 action works with Rem-compatible triggers, and the actions are specifically timed to work with trigger of your choice.
3. Dasher-friendly New Mag Design — The patent-pending Super Short 6 magazine is sized right for the 6mm Dasher and all the 6BR family. The follower and feed lips are configured to allow smooth, reliable feeding with no “magazine nose dives”. Even with the optimal design, the SS 6 magazine will work with all chassis profiles and bottom metal made for AICS-type magazines.
Here is the description from Borden Rifles website:
“The new action from Borden Accuracy (Borden Super Short 6) features a Rem 700 short action-compatible footprint with a shortened magazine well and shortened port set up specifically to reliably feed 6 BR, 6 Dasher, 6 BRA, 22 BR cartridges. The bolt has modified Borden bumps to aid in cycling in the dirty environment. The pictured action shows our standard bolt handle and tear drop knob. Production models will feature a handle that is threaded on the end so individuals can use their preferred knobs. I have been one of the individuals that developed the bolt timing and neutral handoff with the trigger for competition shooting to minimize rifle upset in the bags when closing the bolt. These actions will be available with either the neutral timed handoff or with about .03 to .035 inch cock on close. The cock on close option has much easier bolt lift that seems to be favored by PRS competitors. For now the bolts will have spiral flutes but future versions will have diamond flutes as an option. Development work will be done to also handle the .223 Rem and the PPC family.”
6mm Dasher and 6BR Wildcats Favored by Top PRS/NRL Shooters
1. The vast majority of PRS Shooters surveyed are now shooting a 6mm cartridge of some kind.
2. While the 6mm Creedmoor is still very popular, the 6mm Dasher is now the #1 cartridge among leading PRS and NRL competitors surveyed. (SEE Chart HERE)
3. If you include the 6BRX, 6BRA, and original 6mmBR cartridge along with the 6mm Dasher, this full family of short, fat cartridges is now used by twice as many top PRS/NRL competitors as the 6mm Creedmoor. And the 6.5 Creedmoor has really fallen from favor.
Credit Boyd Allen for Borden Action product find. Credit PRB for data on PRS/NRL cartridge use.
Share the post "New Mag-Fed Action Optimized for 6 Dasher and 6BR Family"
What does it take to win in the tactical game? Ask Oregon’s Jon Pynch. He won the 2018 National Rifle League (NRL) 2018 Championship event along with three out of six of the bolt-action PRS matches in which he competed this year. And with 300 points overall this season, Jon has been a #1-rated shooter within the Precision Rifle Series (PRS). In most sports you’d call that an MVP performance.
PRS Competitor Jon Pynch had a superlative run in 2018, scoring victories in many big matches, capped off by winning top honors at the 2018 NRL Championship. And as you read this, this very day (December 2nd) Jon is shooting at the PRS Season Finale at the Triple C Range in Cresson, Texas. Here is Jon Pynch’s 2018 competition record:
2018 National Rifle League Champion
2018 National Rifle League Finale Winner
2018 Rock Lake NRL Match – Jon Pynch – 1st Place
2018 JC Steel High Mountain PRS Match – Jon Pynch – 1st Place
2018 Meaford PRS Match – Jon Pynch – 1st Place
2018 NCPPRC NRL Match – Jon Pynch – 1st Place
2018 Gunwerks PRS Match – Jon Pynch — 1st Place
NRL Champ Jon Pynch was interviewed for the NRL’s Precision Rifle Channel. Click the Red Arrow above to hear a wide-ranging 45-minute audio interview with Jon, with highlights listed below, so you can skip to key sections.
JON PYNCH PODCAST HIGHLIGHTS:
0:00 to 8:45 — 2018 NRL Championship
9:00 – The mental aspect of shooting
16:30 – Jon’s mindset going into a match
20:30 – What gear Jon ran this season
28:20 – Jon’s hunting background
30:55 – The next up-and-comers in the sport
41:20 – Plans and goals for 2019
43:55 – Three (3) under-rated items Jon can’t shoot without
Pynch won 3 out of 6 PRS bolt-action matches he shot in 2018. Pynch runs a landscaping business in Oregon. When time permits, he travels around the country to tactical matches. He grew up around guns, starting with his trusty BB gun, and the passion grew. About 14 years ago, Pynch started to dabble in long-range shooting from the hunting side. In the past few years, he has focused more on competition, observing how the sport has changed: “Over the past couple of years, I’ve noticed it feels like the level of competition and the level of quality products are growing at an incredible rate.”
CLICK HERE for full size image showing gun details.
The MPA BA Competition Chassis has many notable features: RAT System and multi-function Arca Swiss Rail provide a variety of bipod locations. There is a special rotating barricade stop, plus a spigot mount on the front of the fore-end which can extend the “wheelbase” between front and rear support. A clever Weight Tuning System allows competitors to adjust gun balance and reduce felt recoil.
State of the Art PRS/NRL Tactical Rifle:
Above is Jon’s Match Rifle shown from summer 2018 with older barrel chambered for 6mm Dasher. These shots were taken during a fire-forming session. John says: “On right (below) is unfired Lapua 6mmBR round. Shoot it and it turns in the case on the left. 6mm Dasher. 25 formed… 975 to go! Alamo Precision Rifles did a great job on this chamber/barrel. It’s won a few matches and placed well in a few others, but after 1800 rounds I think I’ll use the rest of its life as a practice/fireforming barrel.”
Making Brass — 6mmBR loaded round is fire-formed into 6mm Dasher 40° improved case:
Jon Pynch’s Favored Hardware — Curtis Vector Action, Kahles Scope, MPA Comp Chassis
Like many PRS/NRL competitors, Jon uses the MPA Competition Chassis, the most-utilized chassis in the 2016 and 2017 PRS series. The match rifle above sports a Curtis Custom Vector Action with Proof Research barrel. For optics Jon has recently used a Kahles scope in the rock-solid, MPA BA Mount, the #1 Mount used in the PRS in 2017.
Share the post "Pynch Podcast — Jon Pynch, NRL National Champ and PRS Ace"
At the request of our readers, we provide select “Deals of the Week”. Every Monday morning we offer our Best Bargain selections. Here are some of the best deals on firearms, hardware, reloading components, optics, and shooting accessories. Be aware that sale prices are subject to change, and once clearance inventory is sold, it’s gone for good. You snooze you lose.
How would you like to get a proper hunting rifle for $209.99? That’s not a misprint. Right now Kentucky Gun Company is selling Thompson Center (T/C) Compass rifles for $259.99 in seven popular chamberings: .204 Ruger, .223 Remington, .22-250, 6.5 Creedmoor, 7mm-08, .308 Winchester, and .30-06 Springfield. But it gets even better — these rifles qualify for a $50.00 T/C factory rebate. That lowers your net cost for the T/C Compass to $209.99 — less than you might pay for a barrel alone. This rifle is perfectly capable of harvesting game, and carries a strong factory warranty backed by Smith & Wesson. Put the dollars you save into optics and ammo.
The 6mm Dasher was originally a wildcat cartridge. To make Dasher brass you had to fire-form (or hydro-form) 6mmBR brass. That all changed a couple years ago when Shiraz Balolia (of Grizzly.com) signed a deal with Norma to produce rifle-ready 6mm Dasher brass. Norma’s Dasher brass features a longer neck offering more seating flexibility (and slightly more capacity). The latest Dasher brass is very good — capable of winning benchrest matches. If you have an older Dasher chamber, just trim the necks. Thanks to Lester Bruno, Norma Dasher brass is now available again. This is premium GEN 2 Dasher brass with the standard rim thickness. We believe Bruno’s is now the exclusive supplier of Norma Dasher brass. The brass is in the USA and will ship soon. Get this Norma-made 6mm Dasher Brass while you can. Price is $114.95 per 100 pieces. Factor in the savings (in bullets, powder, and time) by avoiding fire-forming, and you see why this brass is very popular.
If you’ve been wanting to get a LabRadar Chronograph, here’s your chance. Starting Thursday 11/15/2018, you can save $60 on this very advanced piece of technology — probably the most sophisticated chronograph system ever offered to the general public. That’s notable because you almost never see this discounted below the $559.95 MAP price. Get the LabRadar for $499.95 with this Special Sale which starts on November 15 and extends through December 9, 2018. NOTE: you may be able to get the same deal from other vendors such as Creedmoor Sports, Bruno Shooters Supply, and Midsouth Shooters Supply, but you need to check. Right now we can only confirm the deal through TCK LLC on BuyMyLabradar.com. Check with other vendors on 11/15/18.
4. 21st Century Shooting — 10% Off with Code FALLNOV10
21st Century Shooting offers some of the best precision loading tools on the market. Our editors own and use many 21st Century products, including neck-turning lathe, concentricity gauge, hydro bullet seater (arbor press), and priming tool. You’ll also see these tools in the reloading rooms of National and World Champion shooters. Now you can get this world-class 21st Century gear at a significant discount. Through the end of November, save 10% off many 21st Century products with CODE FALLNOV10. Use that code at check-out. When you’ve filled out your order, type the code in the Coupon Field, then click the button labeled “Redeem Coupon”. That will confirm “10% off all online orders”.
5. Field Supply — Nikon Refurbished Scopes up to 65% Off
You won’t find a better deal on Nikons anywhere. These are Nikon-certified, factory-refurbished scopes. This is a good choice if you’re looking for big-name quality at rock-bottom prices. Good option for a hunting or varmint rifle. The savings on Nikon optics are up to 65% off retail. NOTE: all these Nikon refurbs have been refurbished to Nikon Factory specifications by Nikon, Inc. and are covered by a 90-day limited warranty. Sale refurb optics start at under $80.00.
Right now you can get Lyman’s new All-American 8-station turret press for just $159.99. That’s a great price. This high-capacity turret press sells elsewhere for up to $229.99. The Lyman offers more die stations than the 6-station RCBS Turret and the 7-station Redding T-7. It also has a strong rear support that minimizes head flex. NOTE: Priming on the Lyman turret is done in the front; the image above shows the priming station but not the vertical tube which holds stacked primers.
7. RCBS — Save 25% on Select Dispenser/Scales, Progressive Presses, Prep Centers, and Ultrasonic Machines
RCBS wants you to “buy green” in November. Now through November 30, 2018 you can get 25% Instant Savings on a variety of RCBS’s most popular products, including the ChargeMaster Lite, ProChucker Progressive Presses, and both the Trim Mate and Universal Case Prep Centers. Ultrasonic cleaning machines are also discounted. This is easy-peasy — no forms to fill out and no waiting on rebates. Just shop at your favorite retailer, and you’ll find qualifying products 25% cheaper than last month.
Credit EdLongrange for finding this deal.
8. Midsouth — Tipton 13-Piece Jag set, $11.99
Here’s a great, budget-priced Jag Kit ideal for someone who shots many different calibers. This kit will cover just about any rifle or pistol bore size. Get 13 jags in a handy, clear-top fitted caddy for just $11.99. The kit covers everything from 17 caliber up to .45 caliber, with 17, 20, 22, 243/6mm, 25/6.5mm, 270/7mm, 30/32, 338/8mm, 35/9mm, 375, 40, 44, and 45 jags. The storage box features marked cavities for each caliber. The small .17 cal and .20 cal jags have a 5-40 threads, while all the remaining 11 larger jags have the standard 8-32 thread size.
A strong argument can be made that the best home defense firearm is a 12 gauge shotgun. This Mossberg 500 is a reliable 12ga pump-gun with useful upgrades including ghost-ring sights and barrel heat-shield. This Model 500 Tactical boasts an 8-shell capacity and weighs 7 pounds unloaded. Order now from GunBuyer.com for $299.00. Owners love this serious-looking shotgun: “This unit… fires smooth, and operates perfectly out of the box. There’s an odd beauty to the tactical pump that is hard to describe. The action is smooth and repeatable.”
Share the post "Bargain Finder 164: AccurateShooter’s Deals of the Week"
We like Do-It-Yourself (DIY) projects. It takes initiative, creativity, and dedication to make your own hardware, and that’s worth acknowledging. For you dedicated DIY guys, here’s a great project that should inspire. Here is an owner designed and crafted F-Open rig, complete with home-built, belt-drive front rest.
Some of our mechanically-skilled readers chamber their own barrels or bed their own stocks. But these are relatively simple tasks compared to the jobs of constructing an entire rifle plus building an advanced front rest from scratch. Well that’s exactly what Forum member Steve B. (aka Essexboy) did a couple seasons back. He built his own rifle and an impressive twin-belt-drive pedestal rest. (Click photo below for large version). And get this, Steve’s home-made rifle was victorious in its first-ever match. Steve reports: “I shot my first Comp with the rifle … and managed to win with a score of 239-21!” (The match was shot at 300/500/600/1000/1100 with English scoring of 5 points for center bullseye).
Do-It-Yourself F-Open Rig from England
Steve, who hails from Essex in the UK, constructed virtually every component of his skeleton-style rifle except the 28″ HV Bartlein barrel (chambered as a 6mm Dasher) and the Tikka 590 donor action. Steve also did all the design and fabrication work on his one-of-a-kind front rest. Steve tells us: “Over the last year or so, I made this rifle stock and rest. I managed to make it all on a little Myford Lathe, as you can tell I’m no machinist but it saved me a load of money — so far I’ve got about $200 invested plus the barrelled action. The stock is aluminum except for the stainless steel bag runner. The rifle came in at one ounce under weight limit for F-Class Open division.” Steve did get help with the chambering and barrel-fitting, but he hopes to do all the barrel work himself on his next project.
The gun is very accurate. Steve notes: “I have shot the rifle to 1100 yards and it shoots well. Last time out the rifle dropped just one point at 1000 yards and 5 points at 1100 yards [English scoring system]. I know it’s not pretty, but it got me shooting long range F-Class for peanuts.” Message to Steve: Don’t worry how it looks. As another Forum member observed: “Any rifle that shoots well at 1100 yards is beautiful….”
Steve started with a Tikka 590 action: “The whole stock was made on a small (6.5×13) lathe and a vertical slide. This caused a few head scratching moments, figuring out how to hold the T6/HE30 alloy for the milling/turning operations, but it did teach me a few things. The hardest parts were clamping the longer sections (such as the fore-end) and keeping it all square. Due to the short cross-slide travel I had to keep re-setting the parts. I managed to keep all measurements to 0.001″ (one thousandth). I’m most proud of the trigger guard (photo below). This took a full day but came out really well, even if I say so myself.”
Belt-Driven Front Rest
We’re impressed with Steve’s ingenious front rest. Steve explains: “The rest is belt-driven and still in the experimental stage — hence no powder coating or polishing yet. I may have gone over the top as the key moving parts (the pulleys) run on three (3) types of bearings: radial; reamed bush; and a ball race. The main post runs on a radial bearing and the feet even have bearings in them, so when I raise the main body up (for rough height adjustment) the foot stays static.”
Will Steve build another rifle? Steve says he will, and he’s upgraded his tools: “Since building the rifle I have acquired a bigger lathe (Harrison m250) and a milling machine. For the next project I hope to be able to do the barrel work (threading, chambering, crowning) as well.” The next gun might be another Dasher. Steve explains: “After extensive reading on AccurateShooter.com, I chose the 6mm Dasher chambering, as I have a shoulder problem and can’t shoot a rifle with a lot of recoil.”
Share the post "Home-Built F-Open Rifle and Dual-Belt-Drive Front Rest"
In this video, gunsmith Alex Wheeler explains how to ensure that your full-length sizing dies fit your brass properly. With many cartridge types, it’s not unusual for factory dies to be slightly large in the bottom section. When the diameter of a FL-sizing die is too large near the base, this can leave the bottom section of fired cases “unsized”, with the result that you can have extraction issues and stiff bolt lift, or what Alex calls “clickers”. At the same time, it’s not unusual for dies to over-size fired cases at the shoulder (i.e. reduce the shoulder diameter by .004″ or more).
We strongly recommend that all hand-loaders watch this video, particularly if you load cases 6+ times with relatively high-pressure loads.
Alex explains that a key dimension is the diameter of a fired case 0.200″ above the case head. If your die does not size your fired cases at this point, you should get a FL die that does. This could be a custom die ground to fit your chamber, or it could be a “small-base” die specifically designed to “hit” the bottom section of the case. Alex also notes that some FL dies have an inside chamfer at the mouth of the die, right at the very bottom. (See video at 3:55). This can leave the section of the case right above the extractor groove unsized, which can also lead to “clickers” and stiff bolt lift.
Paint Your Brass to Find Problem Areas
If you are having stiff bolt lift or extraction issues, Alex explains that you can “paint” your brass with magic marker (or dye-chem), and then place the case in your chamber. On the “hot spots” where the case contacts the chamber wall, the marking will rub off, allowing the brass metal to shine through in the problem area(s). This will illustrate where you need better sizing from your die.
“You can ink up the case with some magic marker or dye-chem. If you are getting clickers, go ahead and mark up the case and chamber it and see where it’s wearing. This will help you diagnose [whether the problem] is coming from the base, is it coming maybe from a score in the chamber… it can even happen at the shoulder although that’s pretty rare. Usually the dies size enough at that point.”
Did you find this video helpful? View more informative Tech Tip Videos on WheelerAccuracy.com.
Video Tip from Boyd Allen. We welcome reader submissions.
Share the post "Full-Length Sizing Die Fit — Diagnosing Stiff Bolt Lift Problems"
Take a look at that group. That would be pretty nice for 200 yards. But this group was shot at 600 yards in competition by Fred Dobson at a recent NBRSA match in Oregon. The X-Ring is 1.2″ in diameter. Perfectly centered for a 50-5X, this Light Gun target should be a new NBRSA Score record, pending approval. The previous Score record was Ken Schroeder’s 50-4X.
Fred’s 600-yard group is also amazingly small. Using On-Target Software, we measured Fred’s five-shot group at 0.738″, which is a tiny 0.118 MOA at 600 yards.
NOTE: This is NOT an official measurement. The actual 5-shot group size might be larger or smaller, though it won’t be an NBRSA GROUP record. The current NBRSA 600-yard Light Gun group size record is 0.5823″ set by Robert Hoppe way back in 2008. But Fred’s 50-5X target should, indeed, be a new SCORE record.
Forum member “Jet” reports: “The Tri-County Gun Club just south of Portland, Oregon hosted its second NBRSA 600-guard match 11/18/2017. Twenty-one shooters brought rifles to the line. Fred Dobson shot the 50-5X target shown here.”
Congrats to Fred. Forum member KVD posted: “That’s truly fine shooting — something to be proud of. Seems like the bar gets boosted higher and higher every time there is a sanctioned match.”
Load Specifications
Cartridge: 6mm Dasher
Bullet: Precision Ballistics 105 gr
Powder: Hodgdon Varget
Primer: CCI 450
TCGC 600-yard Range. This range uses the same target holders as the 300-yard line of the 200–300 yard range, which is closed when the 600-yard range is in use. Raised platform is for prone shooting.
About the Tri-County Gun Club in Oregon
Tri-County Gun Club is one of the premiere shooting clubs in the Pacific Northwest. The 230-acre private facility is located in Sherwood, Oregon just 15 minutes from downtown Portland. TCGC offers a wealth of ranges, competitions, and social activities for shooters of all ages, interests, and skill levels.
Article Tip from Boyd Allen. We welcome reader submissions.
Share the post "Drilled by Dasher — Spectacular 600-Yard Target Shot in Oregon"
2017 IBS 1000-Yard Benchrest Nationals Report By Boyd Allen
On September 1-4, the IBS held its 2017 1000-yard Benchrest Nationals at the Whitehorse Shooting Center in Peeltree, West Virginia. There was a great turn-out this year, with 118 entries in Light Gun Class (17-lb limit, 5 shots per target) class and 107 shooters in Heavy Gun Class (Unlimited weight, 10 shots per target). The conditions this year were challenging to say the least, with rain storms, spiraling winds, and fog. In fact, rain and fog on Saturday (with cancelled relays) caused the Nationals to be extended by one day through Monday, September 4th. What’s more, of the 107 shooters listed in the Two-Gun Overall results who actually shot both guns, there were dozens of DQs. (Yes, the wind was a bit tricky at this year’s Nationals.)
Sam Hall, past IBS Shooter of the Year, provided this image and most of the photos in this report.
Congratulations to the “top guns” at the Nationals: Edward Kenzakoski (Two-Gun Overall Champion), Mike Gaizauskas (Light Gun Overall, plus LG Score Agg), and Mike Brennan (Heavy Gun Overall, plus HG Score Agg). Group Agg winners were Richard Schatz for LG, and Charlie Lentz for Heavy. Two ladies also deserve mention. Sally Bauer shot the smallest group of the match, a 1.923″ 5-shot group in LG — that’s 0.184 MOA! Ruth Edwards drilled a 2.104″, also mighty impressive. Nice shootin’ ladies…
White Horse Wind and Weather Factors — and Topography
The firing line for the 1000-yard range has a covered structure with 14 well-spaced masonry benches with block bases and cast concrete tops. Facing southwest, the firing line is above the land between it and the target butts, which are at the head of a canyon. There is a low area with trees on the left with an elevated flat area on the right.
This topography create unpredictable wind patterns that can change rapidly with no warning. Those changes can wreak havoc with competitors’ groups and scores. The wind direction at the targets can be opposite that at the firing line, with the result that a let-off down range not only carries the penalty of making a hold-off incorrect, but because the wind at the firing line can continue, adding the additional penalty of a reversal. This was the common cause of disqualifications, which were numerous at this year’s Nationals.
Light Gun and Heavy Gun Equipment Lists (Partial Sample):
Barrel-Block Heavy Gun with a handsome wood stock. Wide fore-ends enhance stability.
Delay Caused by Fog and Rain
On Saturday, rain and fog delays, caused the match to be extended through Monday. The rules dictate that if a full match cannot be finished because of weather, then all of the day’s results are discarded. This meant that even those shooters who completed their relays on Saturday had to shoot them over — hence another day was added to the event. Because of the prospect of worsening conditions on Saturday afternoon, even though there was daylight left, the decision was made to extend the match through Monday.
Profile of 2017 IBS 1000-Yard National Champion Edward Kenzakoski
Commenting on his performance at the Nationals, Ed said modestly:
“I didn’t shoot really good. I just shot better than them other guys.”
Winning Hardware (with a 110-lb Heavy Gun)
Notably, Ed does all of his own gunsmithing, and he built his Championship-winning rifles. Both guns featured 1:11″-twist, 30″ Krieger barrels. (LG: 1.250″ shank and .950 muzzle; HG: 2″ contour untapered). Ed’s Light Gun has a BAT action, no barrel block, Jewell trigger, and McMillan Tooley MBR stock. His Heavy Gun boasts a 10″-long BAT action in a two-piece aluminum stock with barrel block. That HG beast weighs 110 pounds! Both of Ed’s rifles (light and heavy) wore Nightforce 12-42x56mm BR scopes.
Winning Numbers
To win the Two Gun Overall, Ed posted 137 LG Score, 262 HG Score, and 399 Two-Gun Score Agg. His Group numbers were: LG Group 5.659, HG Group 7.483, Two-Gun Agg: 6.571.
Winning Loads and Reloading Methods
Both rifles are chambered in 300 WSM. Ed shoots 210gr Berger VLDs (sorted every way possible), with Norma brass, Hodgdon H4350 powder, and CCI BR2 primers. For the two guns he used very different seating depths — barely touching for the HG, 0.100″ jump for the LG. He said that it takes him a full four days to load the ammunition for both rifles for a match. Yes, he weighs primers, and he even passes his bullets through a .309 bushing.
No Dark Horse at White Horse — Kenzakoski is a Proven Winner
One shouldn’t be surprised at Edward Kenzakoski’s success. Ed really cleaned up at Williamsport this year, winning one 6-match Aggregate and two 10-match score and group Aggregates. He also established a new Williamsport club Light Gun record of 3.2″.
Last year’s winner Tom Mousel sitting at the bench on Sunday. Tom finished third overall this year.
Record-Setting Asymmetry
In 2016 Michael Gaizauskas set the current 1000-yard IBS Heavy Gun (10 shot) group and score records. He set those records with the rifle on the left (below), then chambered in 6.5×47 Lapua. In this match, Mike won LG Group and LG Overall with the rifle on the right as chambered in his own 7mm short magnum wildcat. Mike designed and built both these distinctive assymetric stocks.
Prizes and Gift Certificates Galore at White Horse
The prize table at the IBS 1000-yard Nationals was impressive, with many scopes and stocks as prizes, plus a treasure trove of gift certificates:
White Horse Shooting Center Facilities, Organization, and Location
The 1000-yard range used at the IBS 2017 Nationals is part of a large shooting facility run by Whitehorse Firearms Outdoor Education Center in cooperation with the West Virginia Division of Natural Resources. White Horse is located off of Route 20 near the small community of Peeltree, WV. The nearest town of any size, ten miles to the south, is Buckhannon, WV, which has about 5600 residents.
White Horse Geography and Climate
The White Horse range is set in wooded hill country, with lots of creeks and some smaller rivers all kept green and running by an annual rainfall of about 48 inches and about the same for snowfall. To my eyes it is beautiful county, pleasingly rural and lush, in marked contrast to where I live where every plant must be served by some sort of irrigation.
Share the post "IBS Match Report: 2017 1000-Yard Nationals in West Virginia"
Hunter always wears proper ear protection. Here he got behind an empty rifle on closed range.
Here is a great “feel-good” family story from Forum Member Jonathan T. (aka “sniperjwt”). Father Jonathan explains how he introduced his son Hunter to precision shooting, at the ripe young age of six. Hunter took to shooting like a fish to water. Now seven years old, Hunter is shooting half-MOA (or better) and hitting steel at 800 yards with ease. What’s more he even finished second in a St. Thomas, Pennsylvania Ground-Hog match — beating nearly all the ground-ups (including his Dad) in the process.
You’ve got to watch this video — It’s priceless. This kid has talent.
Like Father, Like Son — Teaching My Boy How to Shoot
by Jonathan T.
“Focus on your trigger… squeeze it easy”. If I’ve said it once I’ve said it 1000 times. Not because he isn’t listening, but just so he knows how important it is.
Last year, at the age of six, Hunter started showing a lot of interest in going with me to the local shooting range. Of course I was happy to let him tag along and see what it was all about. Most fathers hope that their son will pick up the same interest so they can share something that they both enjoy. Teaching a kid to shoot can be very difficult, but also very rewarding.
The first couple of times I just let him watch and I would go over the safety aspects of shooting and things to watch out for. After several range sessions he was no longer content with just watching and wanted to get in on the action. My first concern was recoil. He was not a big 6-year-old and I did not want to get him flinching because we all know how hard that is to overcome. I started him with a .223 Rem with reduced loads. I haven’t been concerned with where he hits on the target. In fact I often wait until he is done shooting to even look at the target. My focus is on making sure his mechanics are right and his trigger control is what it should be. But as you can see, he learned fast…
Hunter’s first really good group, shot at age 6. This is six shots at 100 yards with a Savage .223 Rem.
After a couple range sessions, he wanted to shoot in one of the local groundhog matches I attend. I told him we would practice some more and if I thought he was ready we would go to the last match of the year in 2016. I ended up letting him shoot in that match, but he struggled a bit as it is a timed event. Overall he was happy with how he did and I was happy he enjoyed himself. Over the winter we continued to practice and he continued to improve each time we went out. In March he turned seven years old, but he is still a little guy weighing only 42 pounds. When this year’s 2017 matches started, he was very excited that I had told him he could go to all of them when he didn’t have baseball games. The first several matches he still struggled a little but he was getting better each time.
Seeing how well Hunter shoots, one Forum member joked: “I’m gonna try Hunters under-the-armpit position. If it works for him….”
Half way through the summer when we were at a match at Shippensburg Fish & Game, Hunter had an “AH-HA” moment. He was shooting at 320 yards and his first two sighters were good so I had him move over to the score side of the target. The first two shots were in the 9 Ring, but he jerked his third shot and it went over into the sighter side of the target. He did not know where it went and I just told him to get another one and shoot again. After he got his target back he looked at me and said “someone shot my target”. I asked him why he said that and he pointed to a bullet hole and said someone shot it right here. I explained to him that on his third shot where he jerked the trigger that is where it ended up. He looked at me and then the target and it was as if a light-bulb went off. Bingo — he finally understood why I kept telling him to focus on the trigger and squeeze it easy.
After the match I let him shoot at 540 yards with the gun we mostly use in matches — a Savage Model 12 F-Class .223 Rem with a Sightron 10-50x60mm scope. Our “go to” load is Varget in Lapua brass with Berger 73gr bullet. He hit the plate just high of middle on the first shot and then commenced to put 12 shots within about a 4″ circle on the plate. After about shot 8 or 9 he asked if he could shoot at something else because he couldn’t even tell where he was hitting as the plate was splattered with hits.
Hunter Hammers Steel at 800 Yards
About a month later we were at the same range after a match and he wanted to shoot some more so I let him try his hand at 800 yards. At that distance there is a large 4’x4’ plate and he thought he was going to shoot at it but I told him I wanted him to shoot at a smaller 8″x11″ plate instead. I dialed in the elevation and told Hunter to get comfortable and “send it when he was ready”. He thought his first shot missed because he did not hear it immediately (as he would at shorter ranges). I told him that he did hit the target and to load another one. The next three were all hits.
On his fifth shot I had him hold just off the left edge because a wind flag suggested it would be blown to the right. But that was not the case, so shot five was a miss. We corrected the hold and he put the last four rounds on the plate. Hunter made 8 hits out of 9 shots on a 8″x11″ target at 800 yards! Not bad for a 7-year-old with a .223 Rem. Oh, and yes, the one miss was my bad wind call.
Hunter Beats the Big Boys at St. Thomas Ground Hog Shoot
The Groundhog match at St. Thomas is one of our favorite matches. Well, at this September match, Hunter would turn some heads for sure. At 100 yards he shot a perfect 100 with three Xs. I told him after he shot the 100-yard relay that his trigger control was not real good and if he wanted to do good at 200 and 300 that he would have to do better. At 200 yards there was a night-and-day difference in his trigger control. It was as close to perfect as I have seen him do. He ended up with a 48-1X at 200. At this time we both had 98 scores but he had 4X and I had 5X. I was joking around with him before the 300-yard relay and he even had me text my wife and tell her we were tied.
After I scored 44 in my 300-yard relay I told him, “Buddy, if you get a 45 or better you will beat me” his response was, “OK Dad, I’ll do that”. After some sighters, his first shot was a 10. I again told him that the trigger control was perfect and to do four more just like that. Hunter’s second shot was a 10. Now I got excited. His third shot was low and right in the 9 ring. Fourth shot was high and left in the 9 ring. Now I am shaking in excitement. Last shot was an 8 low and right cutting the hole of the third shot. I quickly did the math in my head and when he looked up at me I was grinning from ear to ear. I asked him if he knew what score he shot and he replied that he did not. I said a 46, and now he had a huge smile on his face. I let him come over to the spotting scope and look through it and when he got done I gave him a big hug and told him how proud of him I was.
Hunter’s final score was a 144-4X. Only one other competitor (of any age) had a higher class score — 146-3X. So, at seven years of age, Hunter earned a second place finish! But it turned out his superb shooting created a problem…
After the match was over I was called into the club office. Apparently a Junior Shooter had never finished this high and they were unsure how to handle awards since Juniors aren’t charged an entrance fee. I told them that I didn’t care how they handled it. I was just happy that he did as well as he did and he sure was happy that he beat Daddy. In fact Hunter’s score of 144-4X is the 4th highest score of the year in that class. To top things off this was the first time I had let him load his own cartridges from start to finish (under my supervision of course).
Father and Son Spending Quality Time Together
As much as I enjoy Hunter’s interest in shooting, I love the fact that we have something we can spend quality time doing together. At the table after the match, Hunter was sitting next to a well-respected shooter everyone calls “Cowboy”. This gentleman leans over and says “Son, you don’t know how lucky you are, the only thing I did with my dad was work in the garden”. My hope is that one day he will know how lucky he is… Right now I know how lucky I am to be able to spend time with my son doing something we both enjoy.
Share the post "Young Gun — Hunter the Talented 7-Year-Old Trigger Puller"
At the request of many Forum members, we’re reprising this archived video from past IBS 600-yard Shooter of the Year Samuel Hall. Without a doubt, Sam is one of the best mid-range benchrest shooters in the nation. While the video quality is rough (to say the least), Sam’s offers plenty of tips you can “take to the bank”. Even if you don’t shoot competitively, the techniques described here can improve your accuracy when shooting from a bench.
2008 IBS 600-yard National Champion Samuel Hall has prepared a 9-minute VIDEO showing his techniques for shooting from the bench. Sam covers a number of topics including bag set-up, body position, bolt manipulation, and loading skills. He also explains the importance of having a relaxed, comfortable posture and keeping your head in the same position shot to shot.
If you’re serious about accurate benchrest shooting, at ANY distance, you should watch this video. Sam’s tips can really help you. We guarantee it. While the video itself is grainy and wind noise affects the audio, you can still glean many great points from the video. From minute 8:00 on Sam shoots a 5-shot string on camera with his BAT-actioned, Leonard-stocked 6BR. Though he was fighting 20-mph winds Sam achieves a half-inch group at 200 yards. Quarter-MOA in such conditions is good shooting.
Share the post "Solid Gold Shooting Tips from Sam Hall"
Match Report by David and Donna Matthews
The 2016 IBS 1000-Yard National Championships were held September 4-5 at the Cool Acres Sporting Camp in Swainsboro, Georgia. The event was well attended with 87 Registered Light Gun shooters and 76 Heavy Gun competitors. After a hurricane-filled practice day, the competitors put forth their best effort to master the sometimes tricky Georgia range. The 1000-Yard National Match for 2016 featured a three-target Aggregate for each Division (i.e. six targets total for both classes).
The Cool Acres Range and Facility is one of the best in the country. The facility features a wide 1000-yard range lined with Georgia pines on each side. Conditions held constant for most relays. Mother Nature blessed the shooters with temperatures that were cooler than during preceding weeks. The management of Cool Acres put on a great event this year. In addition, upgraded restrooms and a new cleaning shed were added — these were very much appreciated by all. Several shooters had very positive comments about the upgrades and changes made to the Cool Acres facility in Swainsboro.
The Two-Gun Champion and Overall winner was Tom Mousel from Montana with 24 rank points. Tom also won the Light Gun Overall title. Notably, Tom placed first in Light Gun Group with a stunning 3.356″ Group Agg — remember this was at 1000 yards folks. That’s a 1/3 MOA Agg at 1000 yards — truly remarkable precision.
Tom came to Georgia with one thing on his mind and that was winning. He accomplished that with his Wheeler Accuracy-built 6mm Dashers with Krieger barrels. Tom ran Vapor Trail bullets pushed by Hodgdon H4895. Finishing second in the Two-Gun Overall was 2015 winner Jim Bauer with 36 rank points. Jim took First Place honors in Light Gun Score with his Gordy Gritters-built 6mm Dasher shooting Vapor Trails pushed by Hodgdon Varget powder. The bright star of the show was Junior Division Winner Amber Brewer. Remarkably, this talented young lady topped the entire Heavy Gun field, winning Heavy Gun Score (97.667 average) and winning Heavy Gun Overall against all comers (of all ages). Her father, Henry Brewer Jr., played a role in her HG win — Henry smithed Amber’s class-winning 6.5×47 Lapua Heavy Gun, and even crafted the stock. Amber shot Berger bullets with H4895. Sally Bauer was top female shooter with her Douglas-barreled 6mm Dashers LG and HG, both built by Gordy Gritters. Sally also shot Vapor Trail Bullets with Varget.
Mousel won Light Gun Group with a stunning 3.356″ 5-shot Group Aggregate. That’s a 1/3 MOA Agg at 1000 yards — amazing, awe-inspiring accuracy.
Overall Winner Tom Mousel shot the 6mm Dasher cartridge in both Light Gun and Heavy Gun Classes. This little wildcat, shown below, has accuracy to spare. Alex Wheeler smithed Tom’s Rifles. Tom is shown below at his home range in Montana with an older rifle (not one used in Georgia this year).
Follow Link for Full Match Results and Equipment List
The IBS website has results for all major IBS Matches. Complete Results and Equipment Lists for the IBS 2016 1000-Yard Nationals can be found by CLICKING THIS LINK for the Nationals Results Page.
Big Prize Table — Over $18,000 Worth of Hardware
Over $18,000 worth of prizes were awarded at this year’s IBS 1000-Yard Nationals. Prizes included: Nightforce scopes, Sightron Scopes, SEB Coaxial Rest, BAT Action, Bench Source Annealing Machine, Defiance Action, Baity Action, Shehane stocks, reloading tools, Sierra bullets, Berger bullets, and much more. Many thanks go to Stanley Taylor from Douglas Barrels for his time and energy in acquiring prizes for the match. And the IBS thanks ALL of the generous sponsors for the 2016 1K Nationals.
Great Southern Hospitality and BBQ
On Saturday evening competitors were rewarded with a fantastic Southern meal prepared by the talented cooks of Real South BBQ from Swainsboro, Georgia, sponsored by Vapor Trail Bullets.
Share the post "2016 IBS 1000-Yard Nationals at Georgia’s Cool Acres Range"
How well can the little 6mm Dasher perform at 1000 yards when the conditions are good, and the shooter is riding a hot streak? Well here’s a shot-by-shot record of Scott Nix’s 4.554″ ten-shot group shot at Missoula, Montana at the Northwest 1000-yard Championship a few years back. All 10 shots were centered for a 100-6X score. That’s about as good as it gets. If Scott had stopped after 5 shots, his group would have been under three inches.
The gun is very accurate. Steve notes: “I have shot the rifle to 1100 yards and it shoots well. Last time out the rifle dropped just one point at 1000 yards and 5 points at 1100 yards [English scoring system]. I know it’s not pretty, but it got me shooting long range F-Class for peanuts.” Message to Steve: Don’t worry how it looks. As another Forum member observed: “Any rifle that shoots well at 1100 yards is beautiful….”
Fred’s 600-yard group is also amazingly small. Using 
