Last month, Orangeburg, South Carolina became the epicenter of rifle competition on November 4-5, 2023 as the Mid-Carolina Gun Club hosted the widely-acclaimed Tack Driver IV. The Tack Driver has rapidly grown in popularity and stature, becoming a yearly must-attend event. The match’s rise in popularity can be attributed to several factors, including its organizer, the spirited Jim Cline, renowned for his quick wit, larger-than-life persona, and affinity for pranks. The Tack Driver’s popularity and status is further boosted by its unique format: shooting a mix of group and score targets at 300 meters. It has a generous 22-pound rifle weight limit and extends an invitation to all precision shooting disciplines. Competitors get the opportunity to compete with some of the world’s best shooters, have a great time, enjoy fantastic food, and see if they have what it takes to earn the title of “Tack Driver”.
What is the Tack Driver Match
For the uninitiated, the Tack Driver is a 300-meter “take-all-comers” match designed to answer the age-old question of which combination of caliber and shooting discipline is the most accurate. The rules are simple: all rifles will be fired from a bench, 22-pound weight limit, caliber must be .338 or smaller, and no one-piece rest is allowed. Each competitor will alternate shooting 5 group targets and 5 score targets over the course of two days. There are a few more rules, but those are the basics.
The Tack Driver’s course of fire alternates between score targets and group targets. So competitors must demonstrate both precision and accuracy. The group targets test precision, measuring only the group size for 5 record shots. Meanwhile, the score targets demand accuracy with a goal of hitting 5 separate 1″-diameter bullseyes, each with a single shot (ideally obliterating the dot in the center). Each target has a designated area for unlimited sighters during the 7-minute match. At the end of the match, the shooter with the best combination of the highest score and smallest group aggregate wins.
Beginning of Tack Driver IV — Cool Temps and Light Winds
Bright blue skies, light winds, and cool temperatures greeted the 99 competitors in attendance to compete for the title of Tack Driver Champion. The match, since its inception, has attracted a deep list of “Who’s Who” in the world of precision shooting. In attendance are World Record Holders, National Champions, Hall of Famers, Shooters of the Year, and World Team members. Literally the “best of the best” from UBR, Score, Group, 600-yard, 1000-yard, and Ground Hog competitions, were competing in this unique contest of “precision and accuracy.”
Tack Driver IV Video — Many Images from Match
Wayne Campbell’s Tack Driver-Winning 6 PPC Rifle
Wayne Campbell won The Tackdriver IV with a modern 6 PPC rifle. The components included: BAT 3-Lug action, Bartlein 5-groove barrel, Scarborough stock, Nightforce 42x44mm fixed-power scope, Bix ‘N Andy trigger. Notably, Wayne did most of the gunsmithing himself.
Results of The Tack Driver IV — Combined Grand Aggregate
The Tack Driver IV Grand Aggregate Winner is Wayne Campbell! Congratulations to Wayne who was also the Tack Driver Group Shooting Champion with a .7028 Aggregate! This is Wayne’s second year in a row to win this honor.
The “agony of defeat” award goes to Jeff Thompson. Jeff lead in group after targets 3 and 4 and appeared untouchable. However on target 5, Jeff shot an uncharacteristic 1.031″ group, which allowed both Greg Ellis and Wayne Campbell to surge past.
Top 5 Group Results
1. Wayne Campbell .7028
2. Greg Ellis .759
3. Jeff Thompson .7758
4. Jeff Summers .794
5. Dewey Hancock .804
Fun Group Fact: Jeff Summers and Wayne Campbell were the only competitors to keep all 5 groups below an inch.
Top 5 Score Results
1. Derick Loflin 245-2X
2. Stevie Salter 244-3X
3. Rober Seeman 244-3X
4. Dave “SuperMan” Way 244-1X
5. Gavin Peinhardt 243-2X
A big congratulations goes to Derick Loflin, the new Tack Driver Score Champion with a 245-2X. Once Derick moved into 1st place (after target 4 was posted) he never relinquished the lead.
Chambering Selections of Competitors — 6 PPC Most Popular
Of the 98 recorded chambering types for participants, the 6 PPC was the most popular with 39 entries. Next was the 30 BR with 27 entries. There were a dozen 6 BRAs (aka 6mmBR Ackley), plus 11 6mmBRs. There were three 22 PPCs and two each 30 Dasher and 6.5×47, with one Grinch and one 30 WW.
Saturday Morning Tack Driver Interviews with Top Shooters
Click NAME to view YouTube Interview Video:
Jeff Peinhardt, Tack Driver I Champion Hall of Fame Member
Samuel Hall, 600-Yard Shooter 3-Time National Champion
Here is the 0.337″ group shot by George Cabrera. George was shooting a 6mmBR rifle with Panda action (right bolt, left port, no ejector), Kelbly stock, Krieger 1:10″-twist barrel, Jewell trigger, Nightforce 12-42x56mm BR scope. George loaded his 6mmBR rifle with H4895 powder and Berger 90gr HPBT bullets. At 300 meters this 0.337″ group works out to 0.098 MOA (one MOA is 3.435″ at 300 meters).
Saturday Night Cookout with Smoked Prime Rib
With the range closed and targets hung, shooters and family members began gathering at the pavilion (on top of the hill) for the 6:30 feed. With a main course of Smoked Prime Rib, it was a packed house. Previous nights the shooters were treated to a low country boil and grilled chicken. The food throughout the event, lunch and supper is simply amazing. It’s a 5-Star dining experience served with paper plates and napkins. Here is a video of folks enjoying the festivities.
Prime Rib Night Video
Prelude — Tack Driver Lite (November 2, 2023)
This year started with a new event, “The Tack Driver Lite,” held on Thursday morning. two days prior to the regular Tack Driver. The match has two goals: first, to give early-arriving competitors something to do, and second to get the match director, Jim Cline, out from behind his computer and see how he stacks up against the competition. The Tack Driver Lite format is similar to the regular Tack Driver but with a couple of twists. The match consists of 4 targets (2 Score & 2 Group) instead of the usual 10 (5 Score & 5 Group). Each competitor was allowed to put out one flag. Prior to drawing a bench the shooter had to state at what range he would put his flag. Competitors have 7 minutes to shoot one Score and one Group target. The next twist is the targets were hung sideways, one on top of the other, instead of the normal straight up and down. It really shouldn’t make a difference, but visually and mentally it did. With the temperature in the low 30s and light and variable winds, twenty shooters took to the line.
Results of Tack Driver Lite
When the dust had settled Roy “The Renaissance Man” Hunter (photo below) found himself the winner of the score portion of the match, shooting clean with a perfect score of 100. Top dog was Billy Stevens who won both the Overall Grand Aggregate (combined score and group) and the Group Aggregate with a 0.689.
Target by Target Progress of the Main Tack Driver IV Match
More and more folks are using Burris Signature Rings these days. These unique rings feature polymer inserts. That allows you to pre-load some elevation in your scope set-up, or you can center-up the windage. Additionally, the polymer inserts hold your scope securely without leaving marks on the tube. Lastly, some folks believe that Signature rings may offer advantages for benchrest competition. Rodney Wagner shot a world-record 600-yard group using Burris Signature Zee Rings (“Zee” denotes the Weaver-rail model). James O’Hara set multiple IBS 1000-yard records using Burris Signature Zee Rings. James will tell you he thinks “all his guns seem to shoot best with these rings”.
IBS World Record Set with Signature Zee Rings
Are Signature Zees good enough for competition? Absolutely. Some folks scoff at these Burris rings, given their low price. A set of 1″-diameter Sig Zees cost $40.89 at Midsouth. But consider this, in 2013 Rodney Wagner shot the then-smallest 600-yard group in history, a 0.336″ 5-shot stunner, using Signature Zee Rings on his IBS Light Gun. It took five years for a smaller 600-yard group to be shot, a 0.311″ by bullet-maker Bart Sauter, using his IBS Heavy Gun. (See IBS 600-yard Records.) Here’s Rodney with his record-setting rifle, fitted with affordable Signature Zee 30mm rings.
Vendors Have Burris Signature Rings in Stock Now
Various models of Burris Signature Rings are available from many online vendors. NOTE: You may have to check with more than one seller to get the exact size, height, and model you prefer. But right now these vendors have pretty good selections of Signature Zees, including the hard-to-find 30mm High and Extra High models. If you check all three sellers, you’ll probably find what you need.
Interview with NBRSA 3-Gun and Tackdriver Champ Bart Sauter
Bullet-maker Bart Sauter is one of the world’s best benchrest shooters. He won the 2022 NBRSA 3-Gun National Championship this year, and he also has won the multi-class Tack Driver event two years in a row. Plus he has set small-group world record at 600 yards. In this very informative interview, Bart talks about bullets, equipment selection, match preparation, and shooting techniques. We think every benchrest shooter should watch this video.
Master at Work — Sauter in Action
If you want to see how a world-class bench shooter runs his rifle, check out this short video showing Bart Sauter in action. He runs five shots in about 9 seconds.
Interview with 6-Time Nat’l Long Range Champion John Whidden
CLICK HERE for full 81-minute interview with John Whidden.
John Whidden of Whidden Gunworks is one of the greatest American marksman in history. Shooting sling rifles, John has won the U.S. Long Range National Championship a remarkable six times. He has also won a Palma World Championship, and this summer John won the 2022 Smallbore Prone U.S. National Championship. While a humble individual, John has superb shooting skills and unrivaled mental toughness. In this interview, John talks about the challenges of competition and what motivates him to excel. John also talks about the products he has developed for Whidden Gunworks.
Interview with Tod Hendricks, 2021 F-Open National Champion
A member of Team Lapua/Brux/Borden, Tod Hendricks has been one of the most talented and consistent F-Open competitors for many years. He used his mental toughness and wind-reading skills to capture a National Championship in 2021. In this wide-ranging interview with his team-mate Erik Cortina, Tod reveals what it takes to win in F-Open these days, covering equipment, ammo quality, and match preparation.
Brux Barrels is a machine tool company located in Lodi, Wisconsin, specializing in premium, custom, cut-rifled barrels. Brux barrels have set some impressive benchrest records, and have won championships in multiple disciplines. In this video Erik Cortina interviews Ken Clemens of Brux. They discuss the production process at Brux, from the selection of top-quality steel blanks to the final hand-lapping procedures.
Interview with Lanny Bassham, Olympic Gold Medalist and Author
Erik Cortina recently interviewed noted author and Olympic Gold Medal-winning shooter Lanny Bassham. Erik asked Lanny about his book With Winning in Mind. Lanny discussed the “mental game” in the shooting sports and Lanny’s program for visualization of a winning performance. Lanny explains that after you have mastered your rifle skills, and learned to read the wind, it is important to adopt a winning mentality and to visualize success. Lanny should know. He won a shooting Gold Medal in the Olympics along with 22 world individual and team titles.
Interview with Lindsey Paul, Queen of 2 Miles
Lindsey Paul is the only women to win the King of Two Miles ELR competition, becoming the first-ever QUEEN of Two Miles, shooting a .375 CheyTac. In 2021, the talented lady Texan beat a field of top competitors, including past KO2M Champions, all guys. Lindsey had a truly outstanding performance, including 3 hits in 5 shots at the max distance, 2.0 miles (3520 yards). In this interview, Lindsey, who works in the law enforcement field, talks about the Extreme Long Range (ELR) game, and she also explains what it’s like to shoot the heavy-recoiling .375 CheyTac.
Interview with Frank Galli — Founder of Sniper’s Hide
The founder of the popular Sniper’s Hide Forum, Frank Galli is an online pioneer and living legend in the tactical shooting sports world. A former U.S. Marine Scout-Sniper, Frank (aka “Lowlight”) runs a very active Forum with over 180,000 members. Along with moderating his Forum, Frank runs training clinics and hosts regular podcasts. Frank is also the author of the book Precision Rifle Marksmanship: The Fundamentals, an excellent resource for PRS/NRL competitors as well as tactical marksmen.
BONUS Videos — Two Great Tech and Reloading Videos
How to Find Jam Point on your Barrel
Loading for F-Class
Erik Cortina produces his own line of EC Barrel Tuners and Tuner Brakes. These have been used successfully by many top shooters. View the full line of Cortina Precision products at: ShootSmallGroups.com.
Share the post "Saturday at the Movies: Cortina Interviews World-Class Shooters"
Bullet-maker Bart Sauter is the king of 300 meters, winning his second straight Tack Driver III multi-discipline match in South Carolina. For the second year in a row, Bart won the Tack Driver Grand Agg, after finishing sixth in Group shooting and first in Score shooting. Finishing second overall was short-range Benchrest ace Wayne Campbell. Wayne finished first in the Group-shooting phase and took eighth place in score shooting. Third overall was Jeff Peinhardt who, interestingly, was fifth in Group AND fifth in Score — that’s consistency. According to reports, 6mm PPCs dominated this year’s Tack Driver III match held November 5-6, 2022. We believe 6 or 7 out of the top 10 finishers shot a 6PPC. For decades the 6PPC has been the leading chambering for 100/200-yard benchrest-for-group competition.
The Tack Driver Showdown is a one-of-a-kind “all comers” rifle match. This unique multi-discipline match, with both SCORE and GROUP targets, reveals what rifle types are truly the MOST accurate, at least out to 300 meters. The Tack Driver Showdown III match took place last weekend, November 5-6, 2022 at the Mid-Carolina Gun Club in Orangeburg, South Carolina. The organizers invited virtually any type of rifle (except railguns) to compete at 300 meters for group and score honors. No organization membership is required. There were 89 competitors this year.
Unlike any other rifle match in the world, on the Tack Driver firing line you might see 6 PPC LV/HV rifles, 30 BR score rigs, and 17-lb 600-yard and 1000-yard benchrest guns together all lined up together. There may also be a few F-Class rifles, a PRS rifles, and maybe even an AR15 or two. But in 2022, nearly all the competitors had benchrest-style rifles, the majority designed for the 100/200 yard score and group games. That’s not surprising, as low-profile, smooth-recoiling BR rifles rule the roost at 100, 200, and 600 yards. Here are the list of rifles that competed this year according to cartridge type:
Tack Driver III targets were placed at 300 meters (328 yards). That’s not even “mid-range” by benchrest standards, but it is far enough that higher-BC bullets should have an advantage in windy or rapidly changing conditions. This year, however, the 6PPCs shooting lighter-weight 6mm bullets dominated.
Commentary by Tack Driver III Winner Bart Sauter
Winning Equipment — I shot a 6PPC with a .273 no-turn neck, Bartlein 1:13.5″-twist barrel, BAT DS action, Jewell trigger, Harris tuner, and Scarborough stock. On top was a great big ole 10-60X Valdada “Precision” scope with 40mm tube. I also used Vihtavuori N133 powder and my 68gr boat-tail bullets.
Shooter vs. the Gun — The long and the short of it is… you’re only as good as your equipment and the equipment can only perform up to the ability of the shooter. It’s a system. I’ve won it last year with a 6BRA and now with a 6PPC. I’m telling you, caliber-wise, there are a lot of different cartridges and combinations that can win. Jeff Godfrey (of the Piedmont Mafia) brought his 6BRX (I believe), and it shot like a laser. Jeff was in second place at the end of Day 1. If not for a couple of “Orangeburg Gotchas” Jeff would have been right there for the win.
Rifle and Cartridge Choice — Why did I shoot the 6PPC? It’s simple — the goal for this year was to try to make the benchrest World Team. So my resources were directed towards barrels for the 6PPC. I didn’t buy a single long range barrel this year. I used the last of my competitive long range gear for the 600- and 1000-yard Nationals. If I had both the 6BRA and 6PPC working, for this match I’d pick the 6BRA EVERY TIME and TWICE ON SUNDAY.”
Video of Bart Explaining Rest/Bag Set-Up and Showing Shooting Technique
Editor’s Note: 2022 has been a good year for Bart Sauter. He also won the 2022 NBRSA 3-Gun Short Range National Championship shooting his no-turn-neck 6PPC.
Comments by Forum Members:
“Congratulations Bart for your second Tack Driver win! Bart is no doubt a great shooter. He has [the ability] to prepare for a match to the Nth degree, then adapt and overcome changes that arise during a match. Not many have his skill, knowledge, and dedication! Congratulations to all that were there. You are all winners… I hear it was a great time had by all competitors!” — Samuel Hall (Past IBS Champion)
“While the Tack Driver concept is designed to attract shooters from Short Range Group, Short Range Score, F Class, PRS, and all of the other disciplines that require the ultimate in rifle accuracy, it is still a Benchrest match, run under Benchrest rules. Downrange ballistics such as a bullet’s ability to buck conditions take a back seat to a combination’s overall Agging capability. That includes the bullets, the barrel, the tune, the bench equipment[.]” — Jackie Schmidt
“What [the Tack Driver match] shows is the domination of the 6mm bore and small cases. It is a great event to showcase precision bench shooting [with] different disciplines coming together. Good job to Mr. Cline and all those involved including the shooters.” — Jeff PPC
Basic Information on the Tack Driver Shoot:
There are two divisions — bolt-action rifles and semi-auto gas guns. There are no specific design limits other than a 22-lb maximum weight, and a .338 maximum caliber. Past IBS President Jeff Stover tells us: “We envision the full array of the world’s most accurate rifles on the line: short and long range benchrest rifles, F-Class, AR, other tactical, egg-shoot rifles, whatever…[.]” Semi-autos required chamber flags, otherwise bolts must be out at all times.
Share the post "Bart Sauter Wins Tack Driver III Match in South Carolina"
The Tack Driver Showdown is a 300 meter, one-of-a-kind match designed to determine the most accurate rifles in the world regardless of discipline or class. The 2021 Tack Driver II event had 80 of the world’s top competitors representing several disciplines (Short-Range for Group, Short-Range for Score, UBR, F-Class, 600-yd and 1000-yd Benchrest) with calibers/cartridge types ranging from .22 PPC to .300 WSM.
IMPORTANT: Folks, if you shoot competitive benchrest, please DO watch the First Video below. It is full of invaluable information and shooting tips. As Bart holds multiple world records, you should listen to what he says. This is, without question, one of most informative benchrest videos I have ever seen in 18 years of running this site. — EDITOR
This year the match was VERY challenging, with tough, very windy conditions and low temperatures. The overall winner of the Grand Aggregate was bullet-maker Bart Sauter, shown above. Bart was shooting his wickedly accurate 6 BRA rifle with 103gr bullets of his own making. Bart demonstrated that a 6 BRA cartridge with long bullets can beat a 6 PPC, at least at 300 meters when the wind is fierce.
WATCH THIS! Folks, if you are a benchrest competitor, you absolutely should watch this video. This offers very important insights you won’t find anywhere else. The first five minutes shows very important advice on setting up your rest and bags. Starting at the 10-minute mark, Bart shows how he shoots the rifle, with rapid manual reloads. At the very end, 15:55+ Bart runs five (5) shots in 9 seconds!
Match Results — What Cartridge Types Dominated
Bart reports: “It’s interesting to see the calibers/cartridges in the Top 10 of each category. The Group Match was in fact won by the 6 PPC. However, look at the top 5. Three of the Top 5 are NOT 6 PPCs — that’s notable. The Score Match was won with a .30 WW (I have no clue what that is). There were two .30 calibers in the Top 5 and three in the Top 10. The Grand Aggregate was won with a 6 BRA. I think it’s noteworthy the Top 5 had two 6 PPCs, two 6 BRAs and a .30 WW! That’s a pretty good mix. The Top 10 had a variety of 6MMs and one .30 caliber. That’s another surprise.”
Group Match Results
1st 6 PPC
2nd 22 PPC
3rd 300 WSM
4th 6 Dasher
5th 6 PPC
6th 6 BRA
7th 6 PPC
8th 6 BRA
9th 6 PPC
10th 6 PPC
Leveling the Playing Field — What Works Best at 300 Meters Commentary by Bart Sauter
There has been a long standing debate in the shooting world as to whether mid-range/long-range cartridges such as the Dasher, 6 BRA, and 6mmBR are accurate enough to compete against the 6 PPC or 30 BR at shorter distances. The problem has been finding a format that allows the both short-range and longer-range cartridges to compete on a level playing field. The Tack Driver match addresses the problem by moving the distance to 300 meters (approximately 329 yards). This is a bit farther than short range group and score matches which are typically shot at 100 and 200 yards. While the mid-range/long range cartridges shoot primarily at 600 and 1000 yards.
Cartridges Left to Right: 6 PPC, 30 BR, 6mmBR, 6 BRA, 6 DASHER. Those five cartridges represent 85% of cartridge types used at the Tack Driver II match.
Another piece of the puzzle is the type of match — group vs. score. Short Range matches consist of either a group or score match. In group shooting you’re trying to shoot as small of a group as possible (5- or 10-Shot group). Unlike score it doesn’t matter where the group forms on the target. However, in score competition the goal is to hit five individual bullseyes per target, preferably dead center. Score matches are won by the highest point total while group matches are won by the smallest aggregate (smallest average of total groups shot).
Things are different for longer range competitions. 600-yard and 1000-yard Benchrest competitors shoot for score AND group simultaneously on the same target. In other words competitors are trying to shoot the smallest group in the middle of the bullseye for the highest point total. The Tack Driver addresses this problem by having an equal number of score targets and group size targets. Tack Driver II had 5 score targets and 5 group targets at 300 meters, so neither discipline is favored.
6 BRA Wins Tack Driver II Match
The winning combination this year was a 6 BRA (6mmBR Ackley Improved) shot by Bart Sauter. Below are the particulars on Bart’s winning rifle and load information. Watch the following video to learn more about Bart’s very accurate rifle.
Barrel – Lederer 1:8″-Twist, 28″
Barrel Bore Diameter – 0.237″
Neck – .272″ NO TURN
Bullets – 103gr Bart’s Hammers
Case – Lapua 6mmBR parent
Primers – CCI BR4 sm rifle
Powder – Hodgdon H4895
Seating Pressure – 22 to 25 lbs. on gauge
Bullet Seating Depth – .009″ into the rifling from first touch.
Tack Driver II-Winning 6 BRA Rifle — Components Explained
Questions and Answers with Bart Sauter
Match Prep, Cartridge Choice, Comparative Wind Drift, Reloading Gear, Wind Conditions and more…
Q: How did you prepare for the match?
Bart: My good friend and shooting buddy, Jim Chaney, built a target frame which was placed at 300 meters for practice before the match. Our two biggest concerns about the match were: 1) staying competitive during the score portion; and 2) being able to see bullet holes during heavy mirage. The range is mostly South Carolina sand and faces southeast (you can get sun in your eyes). It has a notorious reputation for heavy mirage. So much so that seeing bullet holes can be an issue. Many shooters were swayed to shoot .30 calibers because the holes are easier to see. In fact, when the sun came out for the last couple of targets, several shooters complained they couldn’t see their shots on paper.
Q: I know you’ve shot a 6 PPC for years? What made you decide to go with a 6 BRA?
Bart: Well several things. During practice I bounced back and forth, playing with the 6 PPC and the 6 BRA. My shooting buddy Jim shot his 6 PPC. One of the things I noticed was my 6 BRA consistently edged my 6 PPC and and Jim’s 6 PPC in group size.
The Drift Test — The real eye-opener came when Jim and I conducted a drift test at 200 yards comparing the 6 PPC with 68gr Boattail Avengers to my 6 BRA with 103gr Bart’s Hammers. For the test both rifles were tuned as well as possible. The idea was for both shooters to hold the same point of aim for each shot (total of 5 per sequence). The shots were fired simultaneously by conducting a count down for example “One, Two, Three, FIRE!” Winds were 7 to 10 mph.
Bart (foreground) and Jim Chaney conducting comparative wind-drift tests with 6 PPC and 6 BRA prior to Tack Driver II Match.
Each shot was intentionally fired in a different wind condition over flags. The first 3 shots from the 6 BRA formed a nice 0.300″ group while the 6PPC spread out to a 0.650″. The final two shots were fired in a hard crosswind pushing to the right then a hard crosswind to the left. The 6 PPC was pushed to over a 1.6 inch group while the 6 BRA kept them to around an 0.850″. The test was so conclusive that during the drive to the match Jim abandoned his 6 PPC, and we doubled up on my 6 BRA.
Comparative Wind Drift Explained — 6 PPC vs. 6 BRA
Q: That explains why you chose the 6 BRA, but how did you meet the challenge of seeing 6mm bullet holes despite bad mirage?
Bart: Jim and I played with several different scopes trying to see what would work best. The mirage at my place can be substantial. Around September I purchased the new Valdada 10-60x56mm Precision scope with 40mm tube. This scope is amazing, not only optically, but rock solid accuracy-wise. So if anything was going to work to see bullet holes, it’s this scope. As it turned out, I had no problem seeing my shots on the Tack Driver II targets while others struggled on the last couple of targets.
Q: Did you preload for the match?
Bart: No. I’ve never been to this range so I wasn’t sure where I needed to be load-wise. Also the forecast was calling for cool temperatures and rain, so I had no clue. The plan was to get there early and start tuning soon as the range opened for practice on Friday. It took about 15 shots to verify that the same velocities and load that I ran at a previous Memphis match would work for the Tack Driver II.
Q: If you weren’t preloaded, did you load at the range?
Bart: Not exactly, I didn’t preload for the match at home but I did preload at the hotel. I brought 300 sized and primed cases and everything needed to reload. So after practice, it was back to the hotel to load. Below is my set-up at the hotel.
Reloading setup at hotel: K&M Arbor Press with seating pressure gauge, Wilson Bullet Seater, AutoTrickler V3 Powder trickler/scale housed in a portable, wind-proof loading box.
I loaded cases with Hodgdon H4895 in one-tenth grain increments (0.3 grains total spread) to shoot over the course of the day. I expected that a three-tenth spread would be enough to keep the rifle in tune over the forecast 20-25 degree temperature range. As a backup plan in case the load went completely sideways we hauled all the loading gear to the range each morning. I kept 100 sized and primed cases ready if needed. Fortunately we did not have to use them. We were able to use the three different, prepared loads throughout the day, changing as the ambient temperature rose (highest charge in morning).
Q: What were conditions like?
Bart: The conditions at Tack Driver II for both days were tough! We had switchy head winds ranging from 15 to 25 mph with occasional gusts to 30 mph. Temperature started with morning lows in the high 30s and warmed to a high around 50. The forecast called for rain both days but fortunately it didn’t materialize during the competition.
Bart Sauter checks out conditions during the match. Winds were switchy with gusts to 30 MPH.
Q: Do you have any observations or take-aways from the match?
Bart: Yes, I do! Jim Cline and crew puts on one hell of a match — very well organized and professionally run. And, most of all, the Tack Driver II was fun. Jim keeps things rolling and he has a gift for winding shooters up and getting the competitive juices going. For example he told three of the Top 6 PPC shooters, “If Bart beats you with that 6 BRA, all of you are getting autographed T-shirts at the award ceremony”.
True to his word, Jim Cline presents (L to R) Roy Hunter, Jeff Pineheart, and Wayne Cambell, with their Bart Sauter-autographed Tack Driver T-shirts. (Cline stands behind the trio.)
About Bart Sauter and Bart’s Custom Bullets
Our philosophy at Bart’s Custom Bullets is to take care of our customers, don’t cut corners, test everything, and never sell a bullet I wouldn’t be proud to take to a match. We started making bullets in 2000, while I was still in the Army. From the beginning Kim (my wife) and I decided to spend whatever It would take to get the best equipment available. We built a range for testing at every location the Army sent us. It’s been a successful combination.
Our bullets have set well over 50 world records and have won every major competition in short range. Now we are making strides to accomplish the same thing in Long Range.
Bullet Design — What Does the Future Hold? We have come a long way in the design and manufacturing of bullets. Everything has improved to include high-quality presses, jackets with close to zero run-out, and bullet dies that are straighter and more concentric than ever before. I believe we are close to the apex of designing bullets that shoot from 100 out to 1000 yards. Any improvement at this point will be incremental. In my opinion, the bullets we make right now are capable of shooting a 0.500″ group at 1000 yards (without wind effects). That probably sounds crazy to a lot of shooters. But I think the capability currently exists. It’s just going to take a special gun, barrel, shooter and condition combination to see it. Now bullets for Extreme Long Range (ELR) could be a new frontier for bullet design.
Share the post "Sunday GunDay: Bart Sauter’s Tack Driver Match-Winning 6 BRA"
Look and be amazed. What you are seeing is the smallest 5-Shot group ever shot in 1000-yard competition. And it is also perfectly centered for a 50-5X max score, yes ALL Xs. Brilliant! This amazing group was shot by Mike Wilson in July of 2018 with his 17-lb Light Gun, chambered for a 6mmBR wildcat he calls the 6 BRAW (BR Ackley Improved Wilson). This spectacular feat of accuracy demonstrates the potential of the 6BR family of cartridges even at 1000 yards. For his record group, Mike shot Vapor Trail 103-grain bullets in Lapua 6mmBR fire-formed brass. He loaded Hodgdon H4895 powder with CCI 450 primers. The action was a BAT, the barrel a Brux.
The Best 5-Shot 1000-Yard Group in History
Story based on report by Sam Hall
Look at that target by Mike Wilson. This is one of the most remarkable displays of accuracy (and precision) in the history of long range shooting. This past weekend, Mike (aka “GA. Dawg” in our Forum) drilled a truly spectacular 1.087-inch, 5-shot group at 1000 yards, all centered up in the X-Ring. Yes, you read that right, a group barely over an inch at 1000, shot in competition at an official IBS benchrest match on July 21, 2018. Note, the group was measured at the range at an even smaller 1.068″ (see target). However, as certified by the IBS as a IBS Light Gun World Record, the group is listed as 1.087″.
How small is that in angular measurement? Well 1 MOA at 1000 yards is 10.47 inches, so Mike’s 50-5X masterpiece is 0.1038 MOA! Yes that is an IBS group size AND score World Record. And it is also smaller than the current NBRSA 1000-yard 5-shot LG world record, 1.473″ by Bill Schrader in 2002. This best-ever 1K group* was shot at an IBS registered 1000-yard match at Hawks Ridge Gun Club in North Carolina. Other records have been shot at Hawks Ridge in the past, but this is the most jaw-dropping.
Sam Hall (left, green shirt) holds record target by Mike Wilson (right, white shirt).
Sam Hall, past IBS National Champion and IBS 600-Yard Shooter of the Year, was stunned by Wilson’s accomplishment: “This is a truely awesome marksmanship feat — one of the best in history. I think I would trade all 14 of my 600-yard records for that one!”. Mike’s amazing target will be submitted for approval as new Group Size and Score IBS World Records. Official approval is pretty much a certainty. The previous 5-shot, 1000-yard IBS record is 1.397″ (50 score) by Tom Sarver in 2007. (The NBRSA 1000-Yard 5-shot LG record is 1.473″ by Bill Schrader in 2002.)
Posting on our Shooters’ Forum, Mike wrote: “Thanks everyone for the kind words. As humbling as this game is, when it comes together makes it all worthwhile! A very special THANK YOU to my traveling buddy, my son, Blake, and my wife Debra for allowing me to enjoy this crazy game.” Mike also wanted to thank his smiths and component suppliers.
Mike Wilson IBS 1000-Yard Light Gun Specifications
Action: BAT ‘B’ 1.550 Melonited Action with Jewell Trigger
Barrel: Brux HV 28″ Finished Length, 1:8″ Twist Rate
Chambering: 6 BRAW (6mmBR Ackley Improved Wilson), Chambered by Darrell Jones
Chamber Specs: 0.272″ No-turn Neck with 0.135″ Freebore
Stock: Shehane ST 1000 Fiberglass Stock (with stock work by Larry “Bullet” Archer)
Optics: Nightforce 12-42x56mm Benchrest NP-2 DD
LOAD Specs: Lapua 6mmBR brass (formed to 40° Ackley Improved), Vapor Trail 103gr bullets, Hodgdon H4895 powder, CCI 450 primers.
Leonard Baity front rest with Protektor Bag. Italian Lenzi bag in rear.
World Record-Setting Cartridge and Load
Mike was shooting a 40-degree Improved version of the 6mmBR Norma cartridge. Long popular with Benchrest and 300M shooters, the 6mmBR was the original inspiration for this website. Yep, we started as www.6mmBR.com. The Improved version has extra capacity, allowing about 100 FPS more velocity when chambered with a long throat. For his record group, Mike shot Vapor Trail 103-grain bullets in Lapua brass. He loaded Hodgdon H4895 powder with CCI 450 (small rifle magnum) primers.
Praise from Fellow Competitors
Here are some reactions to Mike’s amazing group by our Forum members:
“Amazing target Mike Wilson! Your group might last forever as ‘the goal’ of 1000-yard Benchrest! Heck that’s a great target even at 600 yards.” — Mike J.
“Think about this for a second. That group was barely larger than the size of your index finger’s first digit and he printed it at 1000 Yards.” — Carlos
“Unbelievable!! Doing that under chosen prime conditions is an amazing feat but to do that in competition and to have everything to come together is just unbelievable. Amazing how far skill, precision, knowledge, and the products of this sport have come. Never thought we would see a group this small and well placed especially in the hills of North Carolina where the wind always blows. Congratulations. A true lifetime achievement.” — Yote Hunter
“I think that one will stand for a while. Hard work does pay off, but it don’t hurt to be one of the givers in the sport. Mike, you are ‘The Man’!” — Bill Shehane
“Awesome, awesome. Now the goal is to shoot UNDER an inch!” — Alex Wheeler
The 6mmBR Ackley Improved
Mike Wilson shot his spectacular group with a 40° Improved version of the 6mmBR cartridge with less body taper than a standard 6BR — the design is 0.463 at the body/shoulder junction (vs. 0.460 for standard 6BR). Mike calls his version of the 6BR Ackley a 6BRAW (“W” for Wilson). Sam Hall explained: “The 6BRAW is pretty much the same as a 6BRA or 6BR-AI (Ackley Improved). I sold the reamer to Mike last year. This has a 0.272 ‘No-Turn’ chamber with a 0.135 Freebore”.
This photo shows a 40° 6mmBR Ackley Improved (6BRA), as used by Tom Mousel in Deep Creek, Montana. Mike Wilson’s 6BRAW may be very slightly different. For Mousel’s 6BRA with 28″ Krieger barrel, the accuracy node is about 2980-2990 fps, so this gives up only 30-50 fps compared to typical Dasher velocities. Mike Wilson’s load runs about 2980 fps also.
In the past couple of years, the 6BR Ackley-type cartridges have been hugely successful in 600-yard and 1000-yard Benchrest. Sam Hall notes: “This year the little 6BR-AI has shot the smallest groups ever fired in 600-yard and 1000-yard competition. Back in April 2018, bullet-maker Bart Sauter, using a 6BRA, shot a 0.311″ 50-score 5-Shot group at 600 yards.” (Read Sauter Story). Bart’s stunning 0.05 MOA group is now the 600-yard IBS HG World Record.(Note: Bart’s target was originally measured at 0.282″ but was later IBS-certified at 0.311″.)
Mike used an Italian Lenzi rear bag. Mike says the super-slick nylon on the ears of this high quality rear bag make for better tracking. The ears provide support but don’t “grab” the stock, reports Mike.
More Comments by Fellow Shooters:
“Truly an amazing feat. The 5X was the icing on the cake! Many shooters would be very happy with that group size at 200 yards.” — Mr. Zero
“Words cannot adequately express how many of us feel about your magnificent accomplishment at 1000 yards. Congratulations — that is terrific!” — Gene Beggs
“Truly amazing … well done on a great achievement… RESPECT!” — Elardus
“Bravo Mike pour ce tir incroyable. Ton exploit est sur le forum de tir longue distance en France bonne continuation.” — Frederic Riso
* There are two North American sanctioning bodies for 1000-Yard Benchrest, the IBS and the NBRSA. The previous 5-shot, 1000-yard IBS record is 1.397″ (50 score) by Tom Sarver in 2007. The existing NBRSA 1000-Yard 5-shot Light Gun record is 1.473″, shot by Bill Schrader in 2002.
Share the post "Sunday GunDay: The Rifle that Shot Smallest 1K Group in History"
Chris Nichols with potential world record (1.297″ 4-Target Agg) Heavy Gun Targets!
Report by Bart Sauter, Bart’s Custom Bullets
Chris Nichols is one of the best 600-yard shooters in the game. This 2019 season he compiled one of the most impressive mid-range benchrest seasons ever. Check out the stats — Chris’s nine-match, Two-Gun Group Aggregate (Agg) for the year is 1.983″! That’s under two inches average at 600 for 72 record targets fired in competition. Many 600-yard shooters aspire to shoot a single, 4-target Agg that measures 1.983″, but doing that for 72 targets is amazing!
And of the nine matches Chris shot, he took SIX Overall Two-Gun wins — a 67% win ratio. And in the process Chris also shot what is possibly the smallest 4-target Heavy Gun Agg ever recorded — 1.297 inches. Hey readers — that Agg works out to 0.206 MOA average group size — well under quarter-MOA for four, 5-shot groups at 0.34 MILES (600 yards)!
Chris with 0.665″ group at 600 yards. This is the smallest HG group fired in the IBS in 2019.
The Equipment: 6mm Dasher Light Gun and Heavy Gun
Chris likes to run 1.550 stainless steel Bat “B” actions, Jewell triggers, Brux or Bartlein barrels. He prefers wooden stocks as he feels they produce a better resonance for Long Range rifles. Chris has his own stock design crafted by Johnny Byers. Imagine a Wheeler LRB stock front half mated with an McMillan ST 1000 rear section and you have Chris’ stock! It features a Wheeler-type, 4″-wide fore-end with an ST 1000 low-comb profile in the back. Both Light Gun and Heavy Gun sport Vortex 15-60x52mm Golden Eagle scopes mounted with Harrell’s double screw tall rings. Chris does NOT use either muzzle brake or tuner.
Here is Chris at his home range with his Light Gun (17 lbs. max).
Chris Nichols’s Heavy Gun is a true heavy coming in at around 42 pounds. It was responsible for the HG Agg of 1.297″ (potential new world record). His season-long aggregate with his Heavy Gun was 1.861″ for 36 targets! This rifle has similar components as his Light Gun, except the barreled action rides in a barrel block in a McMillan HBR 50 BMG stock.
Both rifles ride a top of a Sinclair competition rest with a Protector DR Flat Top rear bag. When Chris goes to HG gun he simply switches tops (made by Daniel Greenlaw) on his front rest to accommodate the larger forend. As Chris says ,” This keeps things simple and exactly the same. ” Just the way he likes it.
Reloading for the 6mm Dasher
Chris’s load choice for both LG and HG is Hodgdon Varget pushing 105gr Berger VLDs. He uses CCI 450 primers, seated with an old Lee hand primer. When it comes to reloading, Chris likes to keep things as simple as possible. “If people saw me reloading they’d probably laugh!” Chris revealed that he doesn’t anneal or clean his cases. He just sprays them down with Hornady One Shot Case Lube, resizes, then runs a brush down the necks, and cleans the primer pockets. The only cleaning his cases get is when he wipes the lube off of them. Chris WILL trim and chamfer as needed.
Chris says seating consistency is critical — he uses a K&M Arbor press with force dial indicator. I asked if there were certain numbers he looks for when seating. Chris replied, “I’m only concerned with consistency and not a certain number, 5 pounds or 60 pounds. It doesn’t matter as long as they are the same. I take what the brass gives me.”
Tuning the 6mm Dasher for Record-Setting Accuracy
I asked Chris what was special about his Dasher and how he kept it tuned and so competitive? His reply is something all shooters should pay careful attention to: “[Success] starts with having a good reamer, bullets and barrels. But more than that, it’s KNOWING your Cartridge, KNOWING your bullets, and KNOWING your barrels! I’ve shot it so much I just know what to do. I’m comfortable with it. I know how to get it to shoot and when it’s not, I have a pretty good idea how to get it back in tune. Once you know your equipment, then you can learn how to get the most out of it.”
Chris has a range at his house and he tunes at 300 yards. He looks for consistent, 300-yard 5-shot groups of 0.600″ or less! He wants to see nice round groups! Not groups with four in and one out or vertical strings. Chris starts by finding “touch” (to the lands) then he moves the bullets .002″ off the lands and begins tuning. Chris has found that usually somewhere around .008-.012″ off the lands is where his Berger 105gr VLDs shot best. I asked Chris what’s the biggest factor contributing to his success? He said, one big thing was that he can do his own work. That’s a huge advantage.
Look for Accuracy First, Velocity Second
Early on Chris had it in his mind that for a 6mm Dasher to shoot best he needed to achieve a certain velocity range — 2990 to 3030 FPS. The problem was he wasn’t paying attention to what the target was telling him. He’d get to the speed he was looking for but the accuracy wasn’t there. Once he started slowing the speeds down and giving the barrel what it wanted, then the accuracy came! Also with the slower speeds came better consistency.
Chris Nichols’s Tuning Tips for 6mm Dasher:
• Take consistency over speed.
• Only change one thing at a time and run it to the ground.
• Every barrel is a little different, so give it what it wants.
• Pay attention to what your target is telling you.
• Don’t be afraid to REDUCE your powder load.
Chris Nichols’s Advice for New Shooters
Chris says the best thing a new shooter can do is align themselves with knowledgeable people, and if they will talk, listen! Next, be ready to buy the best equipment or be ready to buy it twice. Chris also says: “Don’t cheap-out on sighters. Sighters need to be just as good as your record rounds.”
In the Beginning — Learning the 600-yard Benchrest Game
Chris’s shooting career began in 2012. His first win came in 2014. He was shooting beside guys like Sam Hall, Larry Isenhour, Mike Hanes, Jeff Godfrey James Coffey, and Chad Jenkins, who are very tough competition indeed. He said when he won he was ecstatic and he’ll never forget it! That first trophy had him feeling like he’d just won the Nationals! Chris shot a 6BR for the first two years of his career, before switching to the 6 Dasher. I asked him why he switched? He said, “guys were starting to shoot the Dasher and winning with it!”
I asked Chris if he had a mentor and he said, “not really”. He learned by watching the guys who consistently finished Top 5 at matches and occasionally asked them a question. Not two questions, just one! Chris didn’t want to push his luck by asking too much. Then Chris would take that information and test it and apply it to his own shooting. Chris says, “he learned mainly by the ‘school of hard-knocks’. The good thing about learning that way is it sticks with you!”
Chris Nichols 2019 600-Yard Win List and Statistics
This would be an amazing group at 100 yards. But this 5-shot bughole was shot at TWO HUNDRED yards in competition by Bart Sauter of Bart’s Custom Bullets. And he did it with a borrowed barrel!
Be amazed. This five-shot group was shot at 200 yards in competition by bullet-maker Bart Sauter. Bart shot this astounding group with his 10.5-lb Light Varmint benchrest rifle at the recent East-West Match in St. Louis, Missouri. Had Bart been shooting an IBS match, this would have been a new IBS World Record, beating the .091″ by David Farrar in 2006. This .088″ group missed the NBRSA 200-yard 5-shot group record by a whisker — .013″ (thirteen thousandths). The listed NBRSA LV 200-yard Group record is 0.075″ shot by Johnnie Stewart a decade ago.
New record or not, this is one remarkably impressive group, shot by one very talented shooter and bullet-maker. Bart tells us he initially “held center” for the first three shots in the group. Then, watching his wind flags he noticed slight increase in the left-to-right condition, so he held 0.200″ to the left on shot 4 and it worked. Before shot 5, Bart detected another slight change, so he held 0.300″ left for the fifth and final shot. He explained: “If I had not held off for those last two shots, this group would have been about a flat four (0.400″).” Well done Bart!
“First three … bang bang bang … all went in one hole. Then I held left on shot 4 and it worked. On the last shot I held a little more, got lucky and it went in.” — Bart Sauter
In our Shooter’s Forum, Bart posted “This is my personal best-ever 5-shot group at 200 yards. I knew it was small, but was shocked to see it was a Zero! This will be a range record and record for the East/West match. Last group of the day! A nice way to end the match!”
Here is the 6PPC LV rifle that shot the .088″ group. Yes that’s a concrete shooting bench inside a pretty nice cabin with hunting trophies on the walls. Bart explained: “We reload and shoot out of the Monkey Hut, especially during the winter. Most of the time we shoot outside at 100/200 from a a three-bench range.
Amazing Group Shot with Borrowed Krieger Barrel!
There’s a very interesting side-note to this story. You see Bart doesn’t even own the Krieger barrel that delivered this amazing .088″ 200-yard group. That’s right this superb barrel was a “loaner” — borrowed from Bart’s buddy Gary Sullivan. [Editor: Oh that we could all be so lucky with borrowed components.] With Sullivan’s blessing, Bart has since loaned the barrel yet again to ace Billy Stevens, who will be using it at the World Benchrest Championship in Canada, July 14-21, 2019.
This photo shots Bart on the right and his good friend Billy Stevens on the left. Bart notes: “Billy is a 2-time Super Shoot Winner and 3-time USA World Benchrest Team member!”
Bart Sauter’s LV 6PPC Rifle Specifications
Chambering/Caliber: 6PPC
Gunsmith: Stevens Accuracy
Action: BAT DS RBLP Right Eject
Trigger: Jewell
Stock: Scarborough Carbon Fiber over Wood Skeleton
Barrel: Krieger — and it was borrowed!
Tuner: Bukys TSI Tuner
Optic: 40x45mm IOR-Valdada 30mm tube
Rings: Benchsource Double Rings
Front Rest: Farley Joystick
Rear Bag: Edgewood Bunny Ear, very soft, gray leather — special order from Bruno’s.
Front Bag: Edgewood — same soft gray leather.
Here is Bart’s target with a bullet removed. Bart was shooting his own 6mm 68gr Avenger bullets, a double-radius ogive design. The Avengers were seated about .004″ away from the lands: “I tried going into the lands and that didn’t seem to work, then I backed it off four thousandths [from contact] and the rifle liked that.” Bart drove those 68gr Avengers with a stout load of Accurate LT30 powder running 3407 FPS.
Bart’s Comments on His Components and Accessories
OPTICS — Bart likes his new 40x45mm IOR-Valdada Benchrest Scope. He says that, so far, it has proved very reliable and holds zero exceptionally well. This new design features a worm drive side-focus, oversized ocular with true +/- diopter adjustment, long eye relief, and fast-focusing reticle. The 40X Valdada also boasts superb HD “double-compressed” Schott glass from Germany.
TUNER — Bart says the Bukys TSI Tuner definitely helps. He notes that once he finds the “sweet spot” for his barrel he can normally leave it alone: “With that type of tuner, I have to be in a very dire straight to move it. Normally I will set it for the lifetime of the barrel.”
REAR BAG — Bart’s rear bag is an unusual Edgewood with softer gray leather. He says this was a special order by Bruno Shooters Supply. Bart likes how the rear bag works with his carbon-stocked 10.5-lb rifle: “With PPCs we ‘ride on the ears’ — this older bag just seems to work really well for that style.”
SUPER FEET — Bart told us he uses Benchsource Super Feet for his front rest: “The bench tops at St Louis are very slick. Before I set up I’ll use a spray bottle with water and wet the bench where the Super feet and rear bag will go. This really helps to keep things from sliding around!”
Share the post "Sunday Gunday: Bart’s 6PPC Drills Five Shots in .088″ at 200!"
World Record group shot by Bart Sauter in IBS 600-yard Match on April 21, 2018 in Memphis, TN.
0.282 inches, 0.04 MOA… at 600 Yards. Simply amazing…
What can we say… this 0.282″ 5-shot group 600 yards represents one of the most impressive feats of rifle accuracy in history. Shot in competition, this five-shot group at 600 yards easily fits inside a dime with plenty of room to spare!
Bullet-maker Bart Sauter recently shot this 0.282″ five-shot group at a 600-yard IBS match. Yep, you read that right — 0.282″ at 600. Most shooters would be happy with that group at 100 yards. At 200 it would be remarkable. But at 600 — it is truly amazing. Readers, 0.282″ at 600 works out to 0.04 Minutes of Angle (MOA). Not point four MOA, but point ZERO four MOA, and it was all in the TEN RING for a 50 score. Even measured outside edge to outside edge, that group is just 0.525″, so Bart’s group will easily fit inside a dime (0.705″ diameter).
Sauter’s amazing 0.282″ 50 group smashes the existing IBS Heavy Gun 600-yard record, a 0.404″ shot by John Lewis way back in 2008. It also happens to beat the existing IBS Light Gun group record — the stunning 0.336″ by Rodney Wagner in 2013. (A group many said could never be bettered). Bart’s group will be a new score record too — many 50s have been shot before, but the group size is the tie-breaker, and no one has ever shot smaller at 600 than Bart.
Sauter Smashes IBS World Records with Stunning 600-Yard Group
Report by Boyd Allen, IBS Vice President
On the 21st of April, at the beautiful Memphis Sport Shooting Assn. 600-yard benchrest range, bullet-maker Bart Sauter made history. About 11:00 O’clock with 12-15 MPH switchy winds, Bart Sauter waited for his chosen condition and then ran five shots into an incredible 0.282″ record-breaking group, with a score of 50. Shot in Heavy Gun Class (with his Light Gun), this combination of group and score bettered the previous HG group and score records with sufficient margins that their records in both categories are virtually guaranteed. The previous group record, a 0.404″, belonged to John Lewis and stood for ten years. The previous score record was 50/.513 (group size being the tie breaker) shot by B.J. Francis last year. Bart’s target was 50/.282.
To put it in perspective Bart’s record has the equivalent angular dispersion (MOA) of a .04″ group shot at 100 yards. (Bart’s exact MOA is 0.0448) But consider that crosswinds have roughly 36 times more effect at 600 yards than at 100 yards (by the “Rule of the Square”).
Record-Setting Cartridge and Load with Bart’s Own 105gr Bullets
Bart shot a 6mmBR Ackley Improved (6BRA) wildcat cartridge with an 0.272″ neck. This is basically the 6mmBR Norma with a 40° shoulder. The neck is long like the parent cartridge, not short like a 6mm Dasher. Bart was shooting his own 105 grain, 13 Ogive VLD bullets. He calls this new bullet design “The Hammer” (for good reason). Bart’s Hammer 105s were loaded in Lapua brass with Hodgdon H4895 powder and Wolf primers. Bullet tips were trimmed on a Giraud bullet point trimmer, but not pointed. Bart feels that there is too much potential for damaging bullets during pointing, so he does not point his match bullets. Bart had his LabRadar chrono on the bench during the match. Velocities were 2970-2975 fps with single-digit ES.
Record-Setting Rifle — IBS Light Gun Shot in Heavy Gun Class
Bart’s rifle features a melonited BAT B action, with a 26″, 1:8″-twist, HV contour James Lederer barrel, fitted with a Mike Ezell tuner. The Jewell trigger was set to 1.5 ounces. On top was a March 40X in BAT rings. The initial build was by Mike Moses, with chambering by Dean Stroud, and final (glue and screw) bedding by Billy Stevens. The handsome wood JB 1000 stock (3″-wide fore-end) boasts an aluminum keel added by Alex Wheeler after the initial build. Bart said that it only took him 15 minutes to adjust the keel so that the cross hairs did not wiggle on the target when the gun was pulled back a full 2 ½ inches. Bart is definitely a fan of the adjustable keel.
Bench Equipment and How Rifle Was Shot
Bart used a Farley Coaxial front rest with soft leather Edgewood front back sprinkled with baby powder. In the back was a Protektor Model DR rear bag with Cordura ears and no added lube (not needed with aluminum keel) borrowed from Mike Moses. Bart shot the rifle lightly pinned between his shoulder and the fore-end stop. Interestingly, Bart kept his Labradar chronograph on his bench throughout the day, and recorded velocities during the record group: 2970-2975 fps with single-digit ES.
Reloading Equipment and Methods
After firing, cases are annealed with a Benchsource flame annealer. The inside of the case-necks are brushed with a nylon brush (no lubricant is used). Cases are sized with a custom Whidden Full-length sizing die (with bushings), and a cut-down Wilson micrometer seater that was originally made for the Dasher.
Bullets are seated with a 21st Century Shooting Hydro Bullet Seater, used with the Wilson cut-down Wilson seating die. This state-of-the-art arbor press boasts a hydraulic seating pressure cylinder and gauge. During seating, the force gauge reads about 27.
The powder charge is first thrown from a manual measure and usually trickled onto an A&D 120 FXi magnetic force restoration scale using an Adams automatic trickler, but this time Bart had to settle for his old RCBS trickler because the drive band of the Adams auto-trickler wore out.
Brass Prep — The chamber is a 0.272″ no turn. Bart lightly skims the necks AFTER the first firing just enough to achieve batch to batch uniformity in neck thickness. He uses a .266 bushing which gives him .003 neck tension.
Pre-Loading vs. Loading at the Range
I asked Bart if he pre-loads, or loads at the range. Unexpectedly his answer was “Both…depending”. Bart will identify his “in tune” velocity at his home range and then pre-load that load before the match. However, Bart takes all of his reloading equipment to the match, and if the conditions are such that his pre-loaded ammunition does not give the velocity he wants (as revealed by the LabRadar), he will load at the match.
Another test that he feels is important is to be able to pass a bullet all the way through the neck of his fired cases. Bart thinks that even if the shank of a seated bullet does not directly contact a doughnut, that doughnut can have a negative effect on accuracy.
Bart has brought short range benchrest know-how to 600-yard competition. He uses a full set of short range flags, shown above. At last year’s Nationals, at the same Memphis range, Bart was one of the only shooters with a set of flags. Now other 600-yard competitors are following suit.
Final Throughts — The 6BR Ackley vs. 6mm Dasher
Given its prominence, it is inevitable that comparisons be made between the 6mmBR Ackley Improved and the Dasher. On this subject Bart told me that, based on his experience, he is a “Dasher basher”. He believes the Dasher can be finicky, and has a tendency to flip shots out of the group. For Bart, the 6BR Ackley has been a lot easier to work with and more predictable.
Below is a test target Bart shot at 100 yards. The load yielding the smallest 3-shot group, measuring 0.092″, was the load Bart took to the match. As you can see, the positions of the various load adjustments did not change on the targets. Bart said that that is the kind of positive compensation that he likes to see.
While Bart does most of load testing at short range, he can shoot out to 500 yards near his home. He says his record-setting gun has produced multiple 500-yard, 3-shot groups in the “three-quarter inch range” when testing in calm conditions. That’s 0.14 MOA for three shots. At 500…
Congratulations to Bart on His Great Shooting
Finally, I would like to add my congratulations to Bart Sauter for this spectacular group. I also want to thank Bart for generously taking the time to share the details of his load, reloading methods, and rifle components. Bart has shown that applying some short-range benchrest techniques to the mid-range game can produce remarkable results.
Share the post "Amazing Accuracy — Sauter Shoots 0.282″ Group at 600 Yards"
Bart Sauter of Barts Custom Bullets owns a LabRadar chronograph. He was curious to see how his loads performed in actual match conditions, so he brought his LabRadar to a match and set it up right on his benchtop. What he learned was quite surprising. For one thing, Bart found that tuning for the best accuracy (in the conditions), was NOT simply a matter of maintaining velocity. Read all about Bart’s experience in this AccurateShooter Forum Thread.
Bart has competed in short range Benchrest matches with the LabRadar on the bench! Bart observed: “The benches were quite close, but the LabRadar was able to pick up my shots even with the other guns going off very close to it. This is a pretty impressive piece of gear.” Bart’s LabRadar unit had no trouble picking up shots when set on the bench, a bit behind the muzzle. Bart noted: “Yes it can go a long way back. You can be a lot farther behind the muzzle then advertised. At home I could get back up to around 8 feet and pick up the bullet. It’s more sensitive about the side distance. I had mine on level 4. You can also point it at your buddy’s target and get his velocity.” Bart set his LabRadar to be triggered by the sound of the gun.
Long-Life Battery Power
Powering the LabRadar at the range is not a problem. Bart used a portable battery pack that can power the LabRadar for a long time: “I bought a RavPower battery pack from Amazon.com. It was the most powerful compact cell phone charger they had and [it costs about $30.00]. It was able to run the LabRadar for two full days without recharging and still had juice.”
The LabRadar is a pretty expensive piece of kit, but there’s nothing else like it on the market. Bart notes: “The LabRadar itself is about $560.00. The stand is $29.95 for the bench mount and the padded carry case is $39.95. So you’re around $630.00 plus shipping.”
High-Quality Portable Base for LabRadar
If you want to use your LabRadar when shooting prone, there’s a smart new accessory you should consider buying. Matt Owens, one of our Forum members, has created a new, compact base for the LabRadar that works better than the flat, orange baseplate offered by the manufacturer. This $75 folding base is especially useful when shooting prone (see photo above). Matt, aka “Arkcomatt”, explains: “The folding base will fit in the LabRadar case with the unit. No more having to take apart! Just fold the legs. It takes up less room on the bench and allows you to get it closer to the rifle. It is very stable and holds up very well in high winds.” Forum member Peterson1 agrees: “This is more stable than the Labradar base for my use–off a concrete BR bench, yet takes up less space. Also easier/quicker to set unit up and aimed at target. Never take the unit off for transport in LabRadar case.” ORDER BASE HERE.
Forum Member SkiUtah02 uses the base with optional spiked feet: “I bought my base with spikes for the feet to put into the ground. I removed the rubber feet, and screwed in the four spiked feet, [and mounted] an old photography lighting stand swivel head to the base! Worked perfectly. Thanks Matt!”
Full LabRadar Field Test/Review by Ray Gross
If you are considering purchasing a LabRadar Chronograph system, we strongly suggest you read the very thorough and informative LabRadar Review by Ray Gross, past Captain of the USA F-TR team.
Share the post "Chrono Report — Using the LabRadar from Bench and Prone"
Note: In this review, James Mock talks about his experience with an IOR Valdada 36X fixed power scope. A newer, slightly-modified version of this optic is now available. The current IOR Valdada 36x42mm scope is just like the scope James reviews, except that the rear ocular lens is slightly smaller and the new version is about three ounces (3 oz.) lighter. All of Mock’s observations and comments otherwise apply to the current production model.
IOR Valdada 36x42mm Benchrest Riflescope
Review by James Mock
For the past eight years I have been using the IOR Valdada 36x42mm Benchrest scope on my 6mm Dasher/6PPC switch barrel rifle. It has performed flawlessly during this time. Perhaps this may be the best 600-yard fixed power scope in existence. With the 1 MOA reticle one can judge the distance from sighter to point of aim very accurately. With this knowledge, he/she can either adjust the reticle to the point of aim or may use the hash marks for a definite aiming point. The 1/8th-MOA adjustments are positive and repeatable. There is a provision to set a “zero” after adjustments.
The lens in this scope may be its outstanding feature. The glass comes from Schott Glass Werkes of Germany, and in my opinion it is as good as one can buy. Another great feature is the spring that is set against the erector tube (this is similar to the system used by the Nightforce BR model). The photo below shows the housing containing that spring.
Reticle Options — Fine Cross-Hair or MOA with Hash Marks
The IOR Valdada 36x42mm scope is offered with a fine cross-hair for those not wanting the MOA reticle. My choice is the MOA reticle with 1/8th-minute dot in the center.
Tested in Competition — This Scope’s a Winner
My first success using this scope was at the NBRSA Nationals at Desoto, Kansas in 2010. I won the 200-Yard Sporter Agg with a .1727. The scope performed flawlessly and I was lucky enough to pull the trigger at the right time. The following year I finished second behind Jeff Thompson III in the Sporter 200 at the NBRSA Nationals at Midland, Texas. Hall of Fame shooter Don Powell commented that my shooting had really improved since I switched to the Valdada. This scope is rock solid and it surely didn’t hurt my shooting.
I have not shot much short range Benchrest in the last few years, but I still use the Valdada in 300- and 600-Yard matches quite often. Its adjustments are crisp and accurate. The adjustments move the reticle 0.125 inches at 100 yards and therefore 0.75 inches at 600. Using the MOA reticle and the precise adjustments, one can determine the number of clicks needed by using the reticle to see how far off of the aiming point one is on the sighting gongs. If a person wants to “hold off” rather than adjust the scope, he/she can do so by using the hash marks for a definite aiming point.
Updates to IOR 36x42mm Scope — Slimmer and Trimmer
Since I got my IOR Valdada 36x42mm scope, there have been some changes made. My scope weighs about 25 ounces but the new one is about 3 ounces lighter. The folks at IOR (Valdada) got input from Bart Sauter and made the ocular (eyepiece) lens smaller and the scope lighter. Bart is now a distributor for Valdada and many in the Benchrest community are now using this fine scope. Billy Stevens won the Super Shoot and qualified for the World Team using the Valdada. If you are interested, please contact Val Leautu in Littleton, CO at 303-979-4578 or Bart Sauter at 270-879-4279.
Share the post "Optics Review: IOR Valdada 36x42mm Benchrest Scope"
Bart Sauter of Barts Custom Bullets has acquired a LabRadar chronograph. He was curious to see how his loads performed in actual match conditions, so he brought his LabRadar to a match and set it up right on his benchtop. What he learned was quite surprising. For one thing, Bart found that tuning for the best accuracy (in the conditions), was NOT simply a matter of maintaining velocity. Read all about Bart’s experience in this AccurateShooter Forum Thread.
LabRadar Report by Bart Sauter
Bart posted: “I shot a short range NBRSA match [in March] with the LabRadar on the bench! The benches were quite close, but the LabRadar was able to pick up my shots even with the other guns going off very close to it. This is a pretty impressive piece of gear.”
It’s great for tuning. I can’t say for sure but what I saw with the PPC is that just maintaining a certain velocity will not keep the gun in tune.”
One Forum member asked: “Was the LabRadar able to pick up shots that far back (behind the muzzle) and to the side? What setting did you have it set at?”
Bart’s LabRadar unit had no trouble picking up shots when set on the bench, a bit behind the muzzle. In fact, Bart noted: “Yes it can go a long way back. At home I could get back up to around 8 feet and pick up the bullet. It’s more sensitive about the side distance. I had mine on level 4. You can be a lot farther behind the muzzle then advertised. You can also point it at your buddy’s target and get his velocity.”
Bart set his LabRadar to be triggered by the shot: “I had a tuner on the gun but no muzzle brake. [The Chrono] was set to be triggered by the sound of the gun. When you move back you have to play with the trigger level. I put mine on a tripod and was able to pick up projectiles 8 feet back, but from the side had to be within 18 inches.”
Long-Life Battery Power
Powering the LabRadar at the range is not a problem. Bart used a portable battery pack that can power the LabRadar for a long time: “I bought a RavPower battery pack from Amazon.com. It was the most powerful compact cell phone charger they had and [it costs about $30.00]. It was able to run the LabRadar for two full days without recharging and still had juice.”
The LabRadar is a pretty expensive piece of kit, but there’s nothing else like it on the market. Bart notes: “The LabRadar itself is about $560.00. The stand is $29.95 for the bench mount and the padded carry case is $39.95. So you’re around $630.00 plus shipping.”
LabRadar Field Test by Ray Gross
If you are considering purchasing a LabRadar Chronograph system, we strongly suggest you read the very thorough and informative LabRadar Review by Ray Gross, Captain of the USA F-TR team.
Share the post "Bart Goes High-Tech: LabRadar at a Benchrest Match"
Click NAME to view YouTube Interview Video:
More and more folks are using Burris Signature Rings these days. These unique rings feature polymer inserts. That allows you to pre-load some elevation in your scope set-up, or you can center-up the windage. Additionally, the polymer inserts hold your scope securely without leaving marks on the tube. Lastly, some folks believe that Signature rings may offer advantages for benchrest competition. Rodney Wagner shot a world-record 600-yard group using Burris Signature Zee Rings (“Zee” denotes the Weaver-rail model). James O’Hara set multiple IBS 1000-yard records using Burris Signature Zee Rings. James will tell you he thinks “all his guns seem to shoot best with these rings”.
Our philosophy at 
Reloading Equipment and Methods
