“Holy Mother of Mercy…” was this Editor’s reaction when I saw the “screamer” group shot by Forum member Tim Claunch this weekend in Memphis, at the inaugural MSSA 600-yard IBS match. Shooting his amazingly accurate 6BRX Light Gun, Tim nailed a 0.981″ group, centered up for an impressive 50-2X score. Conditions were favorable, with a light 3-5 mph wind and 70° temps. Shooting on the first target, first relay, Tim took his final sighter with 10 seconds to go, then drilled five shots “right down the middle” in about 20-25 seconds. The results were spectacular. Tim’s 0.981″ group works out to 0.156 MOA, and three of the shots clustered in about half an inch! This isn’t a new IBS small group record (Sam Hall holds that record with a mind-blowing 0.699″/50 shot in 2010), but it is still one of the best centered-up groups ever shot in IBS 600-yard competition.
Tim was shooting the same 6BRX we featured last month in the Daily Bulletin. It has a 26″ Bartlein 1.250″ straight contour barrel fitted to a Borden action in a Shehane fiberglass Tracker stock. Tim was running Varget powder with CCI 450 primers and pointed Berger 105gr VLD bullets. Tim anneals his Lapua brass after every firing though he does NOT uniform his primer pockets or ream flash-holes.
Just how impressive was Tim’s 0.981″, 50-score-value group?
Well, consider this comment from Forum member JeffG:
A .981″ group at 600 yards = .981/6.2832 = (H#LY $H*T) = .156 MOA…
Try doing that at 600 yards with wind and mirage and who knows how many little flying insects that might potentially disrupt the bullet… pulling the trigger when the crosshairs are at EXACTLY the same spot (give or take 1/10th the thickness of the crosshairs) EVERY TIME.
CLICK Buttons to HEAR Tim Claunch Talk about Shooting his 0.981″ group.
Music Player Format (1.7 meg)
QuickTime Mpeg Sound Format (880 kb)
With his 0.981″ small group, Tim did take top honors for Light Gun Group. However, he had one shot go wide on another target that raised his Light Gun Group Agg to 2.335″. You’d think that would be good enough to win, but a shooter from Birmingham, Alabama posted a 2.299″ Agg to claim the best Light Gun Agg for the day. Charlie Macke won Heavy Gun group and HG score. The Two-Gun Overall winner was Forum member Stephen Hall. Congrats to all the great shooters at the inaugural MSSA event.
Share the post "Wow — Claunch Shoots 0.156 MOA, 0.981" Group at 600 Yards"
Tim Claunch (aka tclaunch) recently put on an amazing display of precision shooting. At an MSSA 600-yard Benchrest Score match in Memphis, TN, Forum member Tim shot six targets in a row, with an average 5-shot group size of 1.677″. Tim’s stellar performance began with a two-target shoot-off for club Shooter of the Year honors (he won). Then Tim shot four more targets as part of the club’s regular 4-target score match. NOTE: this is NOT an official six-target match result. The actual match that day was four (4) targets only, and Tim’s Agg for those four was about 1.8″, still darn impressive. No one is claiming any records here. Still give credit where credit is due — Tim put together six targets in a row, in competition, averaging 0.267 MOA for all six. Tim’s small group (of the six) was 1.351″ and his large group was 2.088″. That shows amazing consistency. This is spectacular shooting by any measure*.
Tim tells us: “I can check off one of the items on my ‘bucket list’ now — shooting a sub-two-inch Agg. We shot our monthly match here in Memphis at our awesome MSSA range. Though this was a score match, and the first two targets were part of a club shoot-off, I wondered about the average group size of all six. We measured all six targets I shot in sequence on Sunday. I was some kind of happy when I saw it was a 1.677″ 6-target average. That Bartlein and the .140″ FB BRX reamer are a good match. I used Varget with Berger 105gr VLDs and CCI 450 primers. I had never Agged under two inches before in my life (the 4-target Agg was 1.8″). Sure was nice to do it at home the first time.”
Tim shoots a 6mm BRX Light Gun with Shehane ST1000 Tracker stock, Borden Rimrock BR action, and Bartlein 6mm cut-rifled barrel. He uses a Leupold 45X scope in Burris Signature Zee rings sitting on a +20 MOA rail. Tim jokes: “People might laugh at my cheapo Burris rings. Well I guess those Signatures hold zero just fine.” Tim tried a power-booster lens on his Leupold for a while, but this altered eye relief, producing the occasional smack in the forehead. Not surprisingly, Tim removed the booster.
Borden Action with Dwight Scott Bolt and Firing Pin Upgrade
The action is a Borden Rimrock BR dual-port. “This action is smooth, and it allows me to rip ‘em when the conditions are good. For these six targets I shot fast.” The Borden action has some interesting mods: “The firing pin and bolt body were re-worked by Dwight Scott. He has a weight of pin to power of spring he worked out with Tony Boyer. I could tell a significant difference in performance.”
For better target resolution, click the gear-shaped icon and select 480p playback.
The stock is a Shehane fiberglass ST1000 Tracker bedded by TM Stockworks (Tom Meredith). The metalwork was done by Stephen Hall of Dyersburg, Tennessee. Tim reports: “I can’t say enough about this highly-talented guy. He’s a great smith and a great point-blank benchrest shooter himself. I’ve had four chambers cut by him and couldn’t be happier”. The barrel is a 1.250″ straight contour, finished at 26″. That’s a bit shorter than you’ll find on most 600-yard rigs these days, but Tim wanted some weight off the nose so he could add weight to the butt to balance the gun better (and still make weight). Tim raves about this Bartlein barrel: “Readers should not give up on maybe that next barrel being the one barrel a guy gets in a lifetime. I have tried all the cut-rifling barrel-makers, but I’ve recently gone to Bartlein. Based on my ratio of great-shooting barrels to average barrels I am there to stay.”
Tim’s Accurate Reloading Methods Tim’s reloading procedures could rightly be described as the “relentless pursuit of perfection”. After two firings, once “the brass has settled down and conformed to the chamber”, Tim anneals his cases. He then re-anneals after EVERY subsequent firing. The brass he shot at the MSSA match had eight firings, so it had been annealed many times. Tim uses current-generation (blue box) Lapua 6mmBR brass, and he lightly turns his necks for an 0.269″-necked chamber. Tim points his bullets, but does not trim them: “These were pointed, no trimming, just point and shoot. I have shot a few of the new Berger hybrids, but I keep going back to the Berger VLDs.”
Superior accuracy, Tim believes, requires ultra-consistent neck tension. Tim uses a K&M arbor press with a force gauge. If the needle shows any notable variance in seating force, Tim will pull the round apart, run a mandrel in the neck, resize the neck, and re-seat the bullet. If the bullet still doesn’t seat smoothly, he won’t shoot the round for record. Tim is also particular about seating depth: “I measure every loaded round base to ogive using a comparator. All my match ammo is held to plus/minus .0005″ (i.e. one thousandth total spread) in base to ogive length. Yes, this is possible if you anneal regularly and monitor bullet-seating force carefully. If you can’t hold .001″ [base-to-ogive] tolerances with good bullets, that’s probably because of inconsistent neck tension.”
Secret of Success — Improved ‘Bench Manners’ and Gun Handling
Tim had a personal break-through not so long ago that improved his accuracy dramatically. Previously he got down on the gun, and would use some cheek pressure. But he noticed some erratic horizontal in his groups. Tim changed his shooting position, getting his head completely off the stock. The change worked: “After cleaning up my ‘bench manners’ and getting my head off the gun, my groups started shrinking. It was a real eye-opener.” Tim shoots with minimal hand contact (“just touching”) on the stock, and he doesn’t pin the gun to the stop. Tim explained: “I run the gun up to touch the stop before each shot, but I don’t use any shoulder pressure. I don’t push on the gun at all.”
You can learn more about Tim’s amazing six-target display of accuracy in this Forum thread. Registered Forum members can post questions about Tim’s rifle and the shooting conditions, and Tim will answer them when he has the opportunity.
* Just for comparison sake, the NBRSA official Light Gun 600-yard, 6-Target (30-shot) Agg record is 2.092″ (Robert Hoppe, 2006). The IBS official Light Gun 600-yard, 4-Target (20-shot) record is 1.6068″ (Sam Hall, 2011). The IBS does not list a LG 6-target Agg record for 600 yards.
Share the post "Forum Member Averages 1.677″ for Six Targets at 600 Yards"
Ace UK shooter Vince Bottomley decided he wanted to build a new F-TR rifle for the 2011 season. Vince selected all the best components: Stolle Action, Bartlein Barrel, Precision Rifle & Tool Stock. The build came together superbly, producing a .308 Win rifle that shoots bugholes at 100 yards, and holds sub-half-MOA (or better) to 1000. After building the rifle, Vince decided to shoot Open Class at the 2011 European Championship. So, he graciously loaned his purple F-TR rig to his friend, Stuart Anselm. The rest, as they say, “is history”. Despite having just one day’s practice with the gun, Stuart drove Vince’s rifle to victory, winning the 2011 European F-Class Championship (F-TR division) by a sizable margin.
Superb Accuracy with VV N150 and Berger 185gr Bullets
This 2011 Euro Championship-winning F-TR rifle is the star of our latest Gun of the Week Feature Story. In that article, Vince explains how he modified the long PR&T stock to make weight, and how he developed an accurate load with Vihtavuori N150 and Berger 185gr Target Long-Range Bullets. Vince notes that many UK F-Class shooters are moving back to single-base powders, after trying out double-base powders such as VV N550 and Reloder 17. What’s the reason? Barrel life. Vince feels that the single-base powders can give somewhat better barrel life, even if you lose a little velocity.
New F-TR Champion Reviews Bottomley’s Stolle-Action Rifle
Stuart Anselm tells us: “I only shot the rifle a couple of days before the Europeans — two sighters and then five rounds at 800 yards which went into a 3.75-inch group. That gave me a lot of confidence in the rifle. The bi-pod is very light and looked a bit flimsy but it’s well-engineered, so it worked well. That long Precision Rifle & Tool stock is definitely the way to go and helps the rifle to track nicely under recoil. Of course, the Stolle action was perfect with the right-bolt, left-port set-up and the 10-60X March is just about the ultimate F-Class scope.”
Winning Performance: Scoring 452 points out of a possible 475, Stuart won the F-TR Euro Championship convincingly, finishing 10 points ahead of F-TR runner-up Adam Bagnall (also from Great Britain). Stuart also had the highest V-Bull count with 33.
Share the post "Bottomley Builds a Winner — 2011 Euro F-TR Champ Gun"
What’s a “wallet group”? It’s a singularly spectacular proof target that entitles its bearer to bragging rights. The wallet group may or may not have been shot in competition, and, by definition, it may not be repeatable. But it exists as incontrovertible proof that, at least once, the stars aligned, and the wind gods smiled on the shooter.
Five Shots in 0.178 MOA at 1000 Yards
A couple seasons back, Forum member and F-Class shooter Gary Wood was testing his 6.5-284 rifle at the 1000-yard range in Coalinga, California, getting ready for an up-coming long range match. In practice, Gary nailed a witnessed 1.859″ five-shot group, with four of the five shots well under an inch. Use this as proof to win those club-house arguments about whether it is possible to shoot “in the ones” at 1000 yards. Gary’s group worked out to 0.178 MOA!
Gary reports: “I was load testing with 5-shot groups. Each group was shot on a new F-Class center and pulled by Ret. Master Chief Jerry Pullens and spotted by an other long-range shooter. The second 5-shot load group looked really small … by our reckoning four out of five shots measured under an inch. I was amazed. What’s more, when I shot the group, the 4th shot blew the spindle out of the 3rd shot. My spotter saw that in his scope and Jerry Pullens told me about it afterwards”.
As measured with the OnTarget Software, using a scan of the target, Gary plotted the group size at 1.859″ total for five shots, or 0.178 MOA. Gary noted: “I had everyone sign the target which I saved and photographed.” Yes, Gary, this may be the wallet group to end all wallet groups. You should have that target framed.
Gary’s Load and 6.5-284 Rifle Specs
Gary’s load was 48 grains of Hodgdon H4350 and CCI BR-2 primers, pushing 142gr Sierra MKs, in Lapua 6.5-284 brass. The rifle features an F-class, single-shot Surgeon action with a Bartlein 5R barrel chambered with a no-turn neck. Gary says “The barrel only has 70 rounds through it… yep, I think it will shoot.” Gary did all of the gunsmithing and barrel work himself.
Did Gary have any special reloading tricks? Apparently not: “Other than weighing the cases and the powder very carefully, there really were no magical reloading secrets used. The Sierra 142s were moly-coated straight from the box of 500, but they were not weighed or checked for bearing surface. The powder was dropped with a RCBS ChargeMaster then checked with an Acculab scale (to under a tenth). The Lapua cases were not neck-turned, but I did weight-sort them. The five cases for the small group weighed: 195.05, 195.03, 195.03, 195.03, 195.01.”
Share the post "Best Wallet Group Ever? 1.86" 5-Shot Group at 1000 Yards"
If you’re wondering what to ask Santa to deliver this holiday season, how about a Quilted Maple 300 WSM Varminter? That’s what Santa brought Barry O. (aka TheBlueEyedBear) last December. Barry, a respected long-time member of our Shooters Forum, ordered a new 300 WSM Varminter in 2009 and it arrived just in time for Christmas. The beautiful rifle, smithed by Richard Franklin, features a BAT Action, Bartlein 30″ barrel, and a stunning Quilted Maple wood stock. Barry’s new 300 WSM is capable of delivering 125gr Ballistic Tips at over 4000 fps, with great accuracy.
Barry reports: “Here is my 300WSM Varminter built by Richard Franklin of Richards Custom Rifles. This is one awesome piece of work — And YES, it shoots! I expected a lot when I asked Richard to build this gun, and believe me; I got more than I expected. I am not a machinist, nor am I an engineer, but I can tell you for certain that this is the finest quality work you can expect from a gun builder.
As you can imagine, my reason for building this gun was for long range varminting. I had read articles about the flat-shooting 300 WSM Varminter on AccurateShooter.com, and how it could launch a projectile at over 4000 fps with great accuracy. I also read some of the brutal articles on other sites from the nay-sayers. So, I had to have one. Simply put: THE NAY-SAYERS ARE WRONG! You CAN launch a 125gr Ballistic Tip bullet over 4000 fps and terrorize those little fury creatures way far away. I love this thing… I think I’ll ask Richard to build me another!” [Editor’s Note: Anyone wanting Richard Franklin to build a custom rifle had better act quickly. Richard is retiring and he will not work on any orders submitted after January 1, 2011.]
Franklin 300 WSM Vaminter Specifications:
BAT Machine SS Model ‘B’ action, RB/RP, Diamond fluted bolt
BARTLEIN 30″ SS str. 1.25″-diam. barrel (polished) 1:16″ tw, .337 neck
BAT Machine polished aluminum trigger guard
HOLLAND recoil lug
JEWELL BR trigger set at 1.5 oz.
HARRELL’s muzzle brake
UNDERTAKER stock in Quilted Maple, clearcoated
RCR polished SS pillar bedding
LIMBSAVER recoil pad (I hate recoil)
BAT Machine SS 20moa scope base
NIGHTFORCE 30mm scope rings
NIGHTFORCE 8x32x56 NSX with NP-2DD reeticle
NIGHTFORCE angle meter
U.S OPTICS cant indicator
Richard Franklin To Retire — Final Order Deadline Announced
Richard Franklin, builder of the beautiful rifle shown above, has announced his retirement. He will be taking orders for custom rifles through January 1, 2011, but that’s it — he’s giving up the business. Orders received after January 1st will be built by Richard’s protégé Tommy Shurley. Read on…
Richard Franklin Will Retire. Order Cut-Off Date is 1/1/2011
I will be taking orders for custom rifles and muzzle loaders until the 1st of January, 2011. When these orders are completed by me in 2011 I will be officially retired from building rifles as a business. After Jan. 1st, 2011 Tommy Shurley of Shurley Bros. Custom Rifles will be taking over my business known as Richards Custom Rifles. I will retain my website and answer questions as usual. Any rifle orders coming in after Jan. 1st will be directed to Tommy Shurley. Tommy has been working with me for some time now here in my shop and I will continue to work with Tommy in his shop in Heber Springs, Arkansas until I am satisfied that Tommy can build rifles as I have been building them. Tommy will have a full service shop and be able to meet all your shooting needs. — Richard Franklin
Share the post "Dear Santa: Send Me a 300 WSM Ultimate Varminter"
Wisconsin’s Bartlein Barrels currently produces some of the most accurate cut-rifled rifle barrels in the world. We had a chance to chat with Bartlein barrel-makers Tracy Bartlein and Frank Green shortly after the doors opened at the 2010 SHOT Show in Las Vegas. Frank and Tracy weighed in on some of the “hot topics” in the barrel-making business: Gain Twist and the advantages of single-point cut rifling. In this interview, the “boys from Bartlein” discuss current trends in barrel-making, including what’s “hot” in short-range benchrest and the emergence of 7mm barrels for F-Class Open competition. Tracy also offers his opinions on cut rifling vs. button rifling, and he explains how modern technology has helped make modern barrels “better than ever”.
Share the post "SHOT Show Report: The Boys from Bartlein"
We spotted a couple excellent deals in our Shooters’ Forum Classifieds, if you are looking for a 17-lb class BR gun for 300 to 1000-yard varminting and competition.
DEAL ONE — Matt’s 6-6.5×47 for $2100.00
Matt Dienes is a very well-known and respected shooter at the Williamsport Club. He’s decided to part with his Black 6-6.5×47 Light gun that has performed very well at 1000 yards. Only 125 rounds through the Bartlein barrel. Here are the specs:
6-6.5×47 Lapua Light Gun
Panda RB/LP polished action with Jewell trigger
Bartlein HV Contour 1:8″ twist, 4-groove with nuzzle brake
Chambered as 6-6.5×47 Lapua with a .273″, no-turn neck.
McMillan MBR Tooley stock, black color
Polished Shehane +20 MOA Rings.
Matt notes: “The chamber work and muzzle brake were done by Springman rifles. This rifle has shot 3″ at 1000 yards, and that was backed up with a 5.1″ at the Nationals. With only approximately 125 rounds through the barrel, this gun is ready for the 2009 season.”
DEAL TWO — Turnkey 6mm Dasher Package for $2800.00
Here’s an attractive package deal for someone who wants a 6mm Dasher
bench gun. Seller Brandon has a complete rifle, with fire-formed brass, dies, bullets, and even a spare, new Krieger barrel. Brandon says he’s spent nearly $4000 on the rifle and associated tools and components, but he will part with the whole package for $2800.00. Note, though the action has a left bolt, the stock is ambidextrous, so a right-hander could shoot this from the bench — but you’d have to load with your right hand. There’s a lot of value in this package… heck the Kelbly BR trigger is worth $240.00 by itself.
Reloading Tools & Components:
Forster BR Microm.-top Dasher seater die
Forster Dasher full-length sizing die
Wilson inline Dasher neck-sizing die
Lucas Bore Guide
Close to 200 Lapua 6mmbr cases (Approx. 170 fire-formed Dasher cases; 30 more un-formed cases.)
Approx. 250 Berger 105gr VLDs
50 105gr Lapua Scenars
25 107gr Sierra MKs
Brandon would like to keep the rifle, but the current economy dictates otherwise. Brandon tells us: “I have several groups in the .1s and .2s at 100 yards working up loads and several under an inch at 300 yards. the rifle has been shot less than 350 times, possibly less than 300. And there is a brand new 31″ Krieger waiting to go on as well. The rifle was built by a well-known smith from the recommended gunsmith list on this site last summer. This is a great opportunity to get a very Accurate rifle with everything you need to reload and start shooting tiny groups at long range. Asking $2,800.”
“Holy Mother of Mercy…” was this Editor’s reaction when I saw the “screamer” group shot by Forum member Tim Claunch this weekend in Memphis, at the inaugural MSSA 600-yard IBS match. Shooting his amazingly accurate 6BRX Light Gun, Tim nailed a 0.981″ group, centered up for an impressive 50-2X score. Conditions were favorable, with a light 3-5 mph wind and 70° temps. Shooting on the first target, first relay, Tim took his final sighter with 10 seconds to go, then drilled five shots “right down the middle” in about 20-25 seconds. The results were spectacular. Tim’s 0.981″ group works out to 0.156 MOA, and three of the shots clustered in about half an inch! This isn’t a new IBS small group record (Sam Hall holds that record with a mind-blowing 0.699″/50 shot in 2010), but it is still one of the best centered-up groups ever shot in IBS 600-yard competition.
Tim’s reloading procedures could rightly be described as the “relentless pursuit of perfection”. After two firings, once “the brass has settled down and conformed to the chamber”, Tim anneals his cases. He then re-anneals after EVERY subsequent firing. The brass he shot at the MSSA match had eight firings, so it had been annealed many times. Tim uses current-generation (blue box) Lapua 6mmBR brass, and he lightly turns his necks for an 0.269″-necked chamber. Tim points his bullets, but does not trim them: “These were pointed, no trimming, just point and shoot. I have shot a few of the new Berger hybrids, but I keep going back to the Berger VLDs.” 
Five Shots in 0.178 MOA at 1000 Yards
I will be taking orders for custom rifles and muzzle loaders until the 1st of January, 2011. When these orders are completed by me in 2011 I will be officially retired from building rifles as a business. After Jan. 1st, 2011 Tommy Shurley of Shurley Bros. Custom Rifles will be taking over my business known as Richards Custom Rifles. I will retain my website and answer questions as usual. Any rifle orders coming in after Jan. 1st will be directed to Tommy Shurley. Tommy has been working with me for some time now here in my shop and I will continue to work with Tommy in his shop in Heber Springs, Arkansas until I am satisfied that Tommy can build rifles as I have been building them. Tommy will have a full service shop and be able to meet all your shooting needs. — Richard Franklin
Wisconsin’s 
Reloading Tools & Components:
