Report by Craig Arnzen, Area419.com
It’s easy to think about shooting your first precision rifle match and worry about all of the gear and trinkets that you may need to make it through. In reality, the old rules apply — keep it simple.
We wanted to put together for you a no-nonsense list of the Top Five Gear Items you need for your first match. This list focuses on the “must-have” items you’ll need for PRS-Style competitions.
1. A Rifle (That is Reliable and Sub-MOA Accurate)
Your rifle is the most obvious piece of kit, but we can give you a little more information. Most of the guys you’ll find out there are shooting 6.5 Creedmoor. Yeah, there are guys using .308 Wins and 6mm Dashers, but the 6.5 Creedmoor makes up more than half of the rounds shot in PRS competition, when looking at both national and club matches. Your comp rig needs to be mag-fed and shoot better than 1 MOA. It DOESN’T need to be better than 0.5 MOA (half-MOA). With most targets being 2-3 MOA in size, a half-MOA gun will do just fine. More accuracy is better of course, but you don’t need an exotic quarter-MOA rig to win.
[Editor’s NOTE: PRS does offer a Gas Gun division, but most guys start out with a bolt-action rifle, which will be less maintenance-intensive than an AR-platform rig.]
Muzzle brakes, like our Area 419 Hellfire, are also very popular as much of the PRS game is recoil management. If you can’t see your misses, you’re sure to have more of them.
The rifle also needs an optic with repeatable clicks and a reticle with Mil- or MOA-based hashmarks. The clicks can be either Mil system or MOA system (Mil is more common), so long as the click values match the reticle (i.e. you don’t want 1/4-moa clicks with a Mil-marked reticle). How much power do you need? Anything that zooms in the mid-teens will suffice. I could shoot a match with a fixed 12X scope and not feel disadvantaged. We love the Kahles K624i, if you’re looking for a suggestion.
Oh, and you’ll want a bipod — but the choice in bipod deserves a whole separate article by itself. Nothing wrong with starting out with a Harris swivel. Then you might look at different bipods on other competitors’ rifles for comparison.
2. Ammunition — Factory Ammo and Hand-loads
Good ammo is important, but as we discuss above, 0.5 MOA is good enough. Also, speed is great but it matters FAR less than you’d think. Drop can be calculated with precision, and distances are normally known, so a slightly flatter trajectory doesn’t really matter. Wind matters, but the difference you’ll find when eeking out that last 50 fps is very, very small.
Federal, Hornady, and Prime all make quality ammo that is widely used by shooters from local to national matches. Facebook photo by CReece.
Precision Handloads
If you want to run down the rabbit hole of finding that perfect ammo that shoots in the “twos” (0.2 MOA), get yourself an AutoTrickler and some of our billet aluminum accessories — you’ll love the setup.
3. A Versatile Support Bag
There are countless bag options. But there is ONE bag you’ll see everywhere, and for good reason. The Game-Changer from Armageddon Gear is aptly named. Many shooters use it as a barricade bag as well as a rear bag, meaning a guy could get away with using only this bag for an entire match. If you need another bag when you get there, ask someone in your squad, they’ll share. I promise.
4. DOPE (Reliable Ballistics Info)
We’re not talking the kind of Dope you may find in a match outside Denver — we are talking about the kind that feeds you ballistic solutions. The software-enabled Kestrel is a very common item on the range, but you’ll also see lots of guys using mobile Apps such as Shooter or Applied Ballistics Mobile, and they have great results.
It’s also handy to have an armband or an item like the Hawk Hill data card holder for stages with various targets at differing ranges. Once the RO says “engage” and your mind stops working, you’ll appreciate having it written down.
5. Hearing Protection
PRS Competitors shoot with brakes and sometimes in enclosed spaces. That’s why you need serious hearing protection. We recommend NRR 33 earplugs, doubled up with Electronic Muffs to hear range commands. I have used the 33 dB NRR Mack’s foamies at matches for most of the last year, and the Howard Leight NRR 33 Max-1s are also very effective. The budget-priced (under $50) Howard Leight Impact Sport Electronic muffs work well, but premium electronic muffs may be more comfortable.
Growing in popularity are high-tech, in-ear digital units like the ESP Stealth. I have a set of linked ESP Steaths on the way and hope to evaluate them soon. These are supposed to be very good, but the ESP Stealths cost $2100.00 per pair!
Think we missed something? Have more questions? Let us know.
The GAP Grind is one of the most popular tactical matches on the planet. So popular, in fact, that this 3-day Pro-Am event will likely “sell out” this year — with more interested shooters than available slots. To ensure you get a spot at the 2018 GAP Grind, which runs October 5-7, 2018, register early. GAP Grind Registration opens June 1st, 2018 at 9:00 am CST. The 2018 Grind will take place at the K&M Precision Rifle Training Shooting Complex in Finger, Tennessee.
If you haven’t experienced major PRS Pro-Am event like the Grind, with hundreds of talented shooters, check out this video from ShootingUSA. Show host John Scoutten provides a competitor’s perspective.
Lots of Action, with 20+ Stages
The GAP Grind is a notoriously challenging, “high tempo” match with minimal down-time between stages. Over the course of 20+ stages, competitors will fire 200+ shots at a variety of steel, paper, moving, and reactive targets out to 1,200 yards. Targets vary in size/difficulty based on the shooter’s position, distance, and time allotted. Most stages include “stressors” — i.e. time limits or required movement(s).
Josh Temnnen Facebook photo
The GAP Grind is held at the impressive K&M Shooting Complex in Tennessee:
GAP Grind Hardware Shelley Giddings, a skilled shooter of both firearms and cameras, snapped these images of state-of-the-art tactical rifles at the 2014 GAP Grind. See more firearms images on Shelley’s Facebook Page.
We’ve always liked the capacious, durable range boxes from MTM Case-Gard. And MTM offers a special “Tactical” version for AR shooters. This detachable-lid Tactical Range Box features a magwell-filling “action block insert” to support your AR securely during cleaning. Magwell posts like this have been used for years by AR gunsmiths. It’s a fast and convenient way to secure your AR.
The Tactical Range Box also comes with two adjustable cradles that will support most conventional bolt-action rifles and lever guns. These plastic cradles are gentle on fancy stocks, and they can be removed and stowed in the bottom of the box during transport.
The Tactical Range Box uses a two-piece design. The removable top storage compartment holds oils, solvents, brushes, patches, and small accessories. Unlatch the top box to reveal a large, deep storage area that will hold tools, earmuffs, ammo boxes and other larger items. MTM Range Boxes are big enough to hold pretty much everything you need at the range, except your front rest and rear sandbag. Midsouth Shooters Supply offers the MTM Tactical Range Box (item 008-TRB40) for just $43.84. Like MTM’s standard Shooting Range Box, the Tactical Range Box is well-built and much less flexy than generic plastic tool-boxes. Check out the features of this range box in the video below.
For more info, contact MTM® Molded Products at (937) 890-7461 or visit MTMCase-gard.com.
Here’s something that should make you smile. We know that PRS competitors love their support bags. At a PRS matches you’ll see all sizes and shapes of bags — rear sandbags, front bags, barricade bags, even bags you wear on your arms. And now the bag has evolved to the Nth Degree — the Numero Uno bag. This jumbo bag may seem like a joke, but it does offer some advantages.
On his Facebook page, Robert Brantley showed a fellow who used the “Mother of All Bags” in a recent PRS match. This huge camo-fabric bag seemed to be inspired by bean bag chairs. Brantley posted “The Numero Uno! When there’s only time for one bag, why settle for less?”
At the 1:05 time mark the shooter uses the Uno for low position support. It works!
This thing was big enough to support the shooter in seated position, three feet off the ground. We’re not sure about the filling but we suspect the Numero Uno is filled with lightweight packing materials or the material used inside sleeping bags.
Between stages, the Numero Uno also serves as a comfy back rest. Note the color-coordinated orange camo shooting jacket, orange rifle stock, and orange suppressor cover. Who says PRS guys can’t be fashionable too?
PRS Competitors Up in Arms about Big Bag
The giant Numero Uno bag stirred some controversy on Facebook:
“What’s next… the tactical couch?” — Jacob P.
“This is when they need to put rules on the amount of bags you can use. It’s to the point where it’s getting out of control, and PRS shooting is becoming a joke.” — Bryan L.
“This is getting out of control. Need to start restricting to one bag, one tripod. See where skill comes in and not so many crutches.” — Bryce H.
However, George Gardner of G.A. Precision was not too concerned: “Simmer down boys — the guy running it didn’t place well. I’m pretty sure it was more of a funny thing for him. What is the PRS supposed to do? Make a Size limit? He carried it all match long. I’m really not sure it was helpful but it made for great commentary.”
The True Origin of the Numero Uno
In truth, the super-sized Numero Uno bag was crafted by Armageddon Gear in jest. Watch this original Numero Uno spoof video with Armageddon’s owner Tom Fuller. You’ll see the the bag was created as a joke item. Tom’s wise-ass idea was that, if the PRS allowed only one bag in matches, then it should be the biggest bag possible — the Numero Uno. Enjoy…
Looks like MasterPiece Arms (MPA) stocks are a top choice for the tactical game. MPA chassis systems have been used to WIN 5 of the last 12 matches in the Precision Rifle Series (PRS). The MPA BA Chassis was used by David Preston to win the Carolina PRS Match, Defiance Long Range Shooting Experience (LRSE), and Rocky Mountain Mayhem PRS Match; by Matt Brousseau to win the Bushnell Lonestar Challenge; and by Matt Rooks to win the MPA Spring Shootout. Five of twelve works out to a 42% win percentage — pretty impressive considering all the stock/chassis options on the market today.
The MPA BA Chassis was recently surveyed to be the number one chassis/stock system used by PRS competitors in the PRS 2017 Finale Gear Survey. It experienced a 900% increase in use in 2017 from 2016, which was by far the biggest jump among all chassis systems used by PRS competitors.
MPA’s president, Phil Cashin, is an active PRS shooter. He finished in the top 100 in 2017 and qualified for the finale last year. Cashin, shown in the video below, regularly tests out new ideas and upgrades in actual competition and he regularly seeks out feedback from top tactical competitors. As they say, competition improves the breed.
MPA Production Class Rifle
MPA also offers a PRS Production Class Rifle (PCR) using the MPA Chassis system mated to a Savage Model 12 action. Production Class rifles may cost no more than $2000.00 before optics. Designed specifically for the new PRS Production Class, MPA’s PCR Competition Rifle offers many premium features yet stays under the $2,000 Class limit. The Savage action is upgraded with a Rifle Basix 2-lb trigger, and the adjustable, modular chassis offers a bag rider, barricade stop, and built-in bubble level.
For more information on the MasterPiece Arms product line of rifles, chassis systems and accessories, visit www.Masterpiecearms.com.
Did you know you can damage your hearing even if you are wearing the best hearing protection available? Well, have you ever heard of concussion (or concussive) hearing loss? There is no amount of anything you can put in or over your ears to protect you from concussion loss. My audiologist explained to me the concussion comes through the facial bone structure and damages the ear’s tiny bones.
Editor’s NOTE: This may be the most important tech article we’ve run all year. It explains how you can suffer inner ear damage and hearing loss even if you use earplugs or muffs. Read that again — hearing loss even with typical hearing protection. This kind of concussive hearing loss can result from shooting with muzzle brakes in confined spaces. Using a suppressor (aka sound moderator) can reduce the risk of concussive hearing loss. You may not have the ability to use a suppressor, but this article explains how you should be more mindful of your hearing.
Why I Use a Suppressor (Preventing Concussive Hearing Loss)
It must have been the road noise. I thought I was having a hard time hearing my five year old daughter speaking to me on my cell phone because of the road noise. That old SUV was kind of loud inside. Until I switched the phone to my left ear and suddenly I could hear her just fine. Wait, what just happened? I moved the phone back to the right ear and there was that muffled voice again. That’s when I knew I had a problem.
“What?” Lots of us in the shooting community have lost some hearing along the way due to our time on the range or in the field. Those of us who hunt have certainly discharged a firearm or three without ear protection and without concern for our hearing. After all, it’s just one shot, right? How much can it hurt?
Actually, that one shot DOES hurt your hearing. Any sound over 140 dB is immediate hearing loss. It just happens to be killing a small amount of our hearing so most of us continued the practice without a care. Living with hearing loss now makes me wish I could go back 20 years and better protect my hearing. I can’t change what I did in the past, but going forward I can certainly do the most to protect the hearing I still have.
I decided to shoot about a year’s worth of matches with just braked rifles. That year is when I lost significant hearing in my right ear and some in the left. I’ve gone back to shooting only suppressed rifles whenever possible.
I shot my first suppressed firearm, a .22 LR pistol, in 2003. After a few rounds I wondered why everyone (who can do so legally) didn’t shoot suppressed? No one drives without a muffler. Why would you? Point is I immediately appreciated the hearing protection benefits of suppressors. That passion got me into the business of selling suppressors and it wasn’t long before I was one of the biggest retailers for companies like AAC, SWR, SilencerCo, Ops Inc. and others. [Editor: The author’s business, Accurate Ordnance, no longer sells suppressors. So this article is NOT a sales pitch. Mark just wanted to share his experience so others might protect their hearing.]
Did you know you can damage your hearing even if you are wearing the best hearing protection available? You’ve heard guys say, “I’ll wear plugs and muffs, so I’ll be just fine shooting that .50 BMG!” Well, ever heard of concussion (or concussive) hearing loss? Yeah, I hadn’t either. I’ll sum it up the way the last audiologist I spoke with about my hearing loss did – there is no amount of anything you can put in or over your ears to protect you from concussion loss.
A hand grenade went off right next to a buddy of mine. He lost some hearing as a result of the blast. No one is really surprised by that. I mean it is an EXPLOSION. It’s loud. Duh. But I had no idea the blast from a muzzle brake could basically hurt my hearing the same way. The doctor explained to me the concussion comes through the facial bone structure and damages the ear’s tiny bones. Same thing as what can happen through any TBI (traumatic brain injury).
I’ve owned quite a few different suppressors over the years and have shot just about everything out there. I’m still as big a fan as ever. However, I wanted to see if using a suppressor in PRS (Precision Rifle Series) and similar matches was actually a hindrance. Some people feel the added length and weight of a suppressor can make getting into some shooting positions slower or problematic. So I decided to shoot about a year with a muzzle brake instead of a suppressor. I sure regret that decision…
Getting Headaches at PRS Matches Was Warning Sign
It is fairly common in PRS matches to shoot through pipes, vehicles, inside “shoot houses” and around other obstacles that echo a rifle’s blast. I noticed I was starting to get headaches about halfway through a day of PRS match shooting. I knew the issue wasn’t hydration. I mean look, if you are peeing every other stage down at the amazing CORE range facility in mid-summer you are NOT dehydrated. So, what was causing the headaches? It wasn’t until I went back to shooting suppressed in those same environments that it became clear the little mini concussions from that muzzle brake was causing my headaches. And of course the doctors confirmed that.
Let me stop here and say I am NOT anti-brake. Muzzle brakes are useful tools and for some situations are the best tools. An aggressive brake can be more effective at reducing recoil than a good suppressor. A suppressor does add some recoil reduction, just not as much as most quality brakes. Don’t forget to factor other variables, such as caliber and rifle weight, into the equation though. For example, a 15-lb 6mm Creedmoor rifle doesn’t need much recoil reduction in the first place.
So, I started shooting matches long before the PRS even existed and always shot suppressed in those days. The suppressors made communication with a partner or RO easier and it was just a more pleasant shooting experience. On the recommendations of a few people I decided to shoot about a year’s worth of matches with just braked rifles. That year is when I lost significant hearing in my right ear and some in the left. I’ve gone back to shooting only suppressed rifles whenever possible and especially at matches. I’ve only once or twice found the extra length of the suppressor made it a little more inconvenient to run a stage, but not by much. Trust me, the points I missed were not because I took two extra seconds getting the muzzle in a port or window.
My hearing is something I value and will do everything to protect from this point forward. You’ll never again see me on a match field with an un-suppressed rifle. To me the minimal gains of running a braked rifle aren’t worth losing more hearing.
Choosing a Suppressor — What to Consider
Okay, so I have hearing loss that I can’t get back and realize I need to go back to shooting matches with a suppressor. But which one? I’ll still be shooting matches with custom fit plugs so I just need something to add a little recoil reduction and kill that concussion.
At our shop, Accurate Ordnance, we generally recommend direct-thread suppressor solutions to our customers. The main reason for that is all the problems we’ve seen with other fast-attach muzzle devices. It doesn’t take much tolerance stacking to result in accuracy issues. There are a few exceptions for us and the Rugged Suppressors products top the list. Since the Razor 762 uses a muzzle brake adapter on the rifle to attach the suppressor, I can use the same suppressor on my .223 Rem training rifle. My primary match rifles are chambered in 6mm Creedmoor and 6.5 Creedmoor and the muzzle threads on those is a standard 5/8×24. My .223 Rem training rifle has .5×28 threads on the muzzle, which is standard for that caliber. Thus, the muzzle adapter interface lets me share the suppressors between all the rifles. And on that .223 Rem training rifle I have the option of switching the end cap on any of the Rugged products to a .223 aperture size, which makes the suppressors slightly more sound efficient (meaning quieter).
PRS guys — check this out. Kahles has just announced a 5-25X First Focal Plane optic that should be a class leader. If you are thinking of upgrading your tactical scope this year, the new Kahles K525i should definitely be on any “short list” of ultra-premium optics. We predict this will be one of the top-performing tactical scopes on the market. Unfortunately, it will also be one of the most expensive. Kahles lists the K525i at €3,300.00 Euros. That’s $4,093.58 at current exchange rates! You can buy a pair of pretty nice tactical rifles for that. Hopefully Kahles will consider dropping the price a bit for the American market. Don’t know how many PRS guys are willing to fork over four grand for a scope.
Thankfully, it looks like the true “street price” in the USA will be a lot lower. EuroOptic.com is now taking pre-orders for the K525i at $3,299.00 USD — that’s a lot different than the €3,300.00 Euro MSRP. Kahles says the scopes should start arriving in summer 2018.
This scope is available in both Mil and MOA versions. Click values are 0.1 MIL, or 1/4 MOA. A variety of illuminated, First Focal Plane (FFP) reticles are offered: SKMR3, SKMR, MSR2, Mil4+, MOAK. Notably the parallax control is coaxial with the elevation turret (meaning it is centrally mounted). You adjust parallax by rotating a large-diameter control that runs around the base of the elevation turret. We know that south-paws really like that feature.
Kahles also offers two windage configurations. You can have the windage mounted on either side — on the left side for right-handed shooters or on the right side for left-hand shooters. The windage knob also features a patented “Twist Guard” rotating end cover, which is easy to control while preventing accidental windage rotation.
Manufacturer’s Product Description
K527i features: Maximum optical performance-field of vision, contrast and picture quality, Exceptional repeat accuracy, precise and clearly defined turret mechanism 0.1 MIL or 1⁄4 MOA, side adjustment left or right, Parallax wheel integrated in the elevation turret, patented TWIST GUARD windage, precise illuminated reticles in the first focal plane and large adjustment range.
“The big brother of ultrashort K318i is the new flagship of KAHLES in the field of tactical riflescopes. It combines … maximum optical performance and highest precision with unique handling and ergonomics. The rugged K525i, with its practical magnification range, has been developed for tactical use and long distances.”
PRODUCT HIGHLIGHTS
.: Maximum optical performance — field of vision, contrast, and picture quality
.: Exceptional repeat accuracy
.: Precise and clearly-defined click mechanism 0.1 MIL, MRAD or ¼ MOA
.: Side adjustment left or right
.: Parallax wheel integrated in the elevation turret (patented) for 20m – infinity
.: Innovative, patented TWIST GUARD windage
.: Precise illuminated reticles in first focal plane: SKMR3, SKMR, MSR2, Mil4+, MOAK
.: Large adjustment range with 2.9m (E) and 1.3m (W) at 100m
.: Zero Stop
The most eye-catching display at SHOT Show 2018 was a 3D Hologram animation of the new SAR 9 pistol. Showing the pistol assembling itself in mid-air, the hologram was mesmerizing.
So many products — so little time. We saw some very interesting new products including new Berger Ammunition on our second day at SHOT Show. There were many interesting tools on displays as well as cool new rifles for hunters, varminters, long-range shooters, and tactical marksmen. We also met some old friends on Day Two, including the legend himself — Jerry Miculek.
To give you a feel for SHOT Show, here’s a nice teaser video filmed last year. This shows both Media Day and the events inside the Sands Convention Center. Though this is a year old, we definitely recommend it. Plus is has a LOT of pretty ladies. You won’t be disappointed — honest.
This Video is from 2017, But You Should Definitely Watch It — Lots of Pretty Ladies!
NEW — Berger Branded Ammunition in Lapua Brass
Berger Bullets + Lapua Brass in factory-loaded ammo. You asked for it. Now it’s here. The new line of Berger Ammunition was unveiled at SHOT Show this week at the Capstone Precision Group booth. Berger, Lapua, Vihtavuori, and SK Ammo are now all owned by Nammo Lapua, so we can have these great American-made bullets packaged with superior, European-made Lapua brass*. This is an exciting development. There will be three (3) lines of Berger Ammunition: Match Grade Target, Match Grade Hunting, and Match Grade Tactical. We’ll have a full report with field tests this spring.
NEW and IMPROVED — Lyman Higher Rez Borecam
Better. Sharper. Higher Resolution. The new, upgraded Lyman Borecam® Digital Borescope is a serious candidate for best gunroom tool of the year. We really liked the original Borecam and recommended it highly. But now the new version is a LOT better. Now offering 300k resolution, you can really see finer details inside your bore. Trust us — the difference is VERY Noticeable. We could see very fine detail as never before. We like the fact that the lens wand is marked like a ruler so you can see your insertion depth and the handle has an indexing mark so you can keep track of your rotation. Great product. NOTE: The 300K means the camera delivers 300,000 pixels, i.e. 0.3 megapixel. For a square this is about 550×550. For a standard aspect ratio, this is similar to 640×480 resolution.
NEW — Walther KK500 .22 LR 3P Competition Rifle
Walther unveiled a handsome new smallbore (.22 LR) competition rifle, the KK500. This is more compact, with a shorter length of pull, so it’s a great choice for smaller-framed competitors — women and junior. The new Walther KK500 position rifle features bold red/gray laminated grip and fore-end block, plus an eye-catching red bolt handle. Very nice rimfire rifle for serious 3P smallbore shooters.
NEW — RCBS 6-Station Brass Boss
We tried out the new Brass Boss from RCBS. This new machine features SIX (6) powered tool heads, plus brushes. Four of the tool heads run at variable speeds up to 350 rpm. Two other high-speed tool heads run up to 550 RPM. There is a convenient speed control knob on the side of the unit. This is a great feature — you can run at high RPM for hard jobs like removing military primer crimps, and then slow way down to do more precise tasks such as inside chamfering. We like the Brass Boss. It is a definite upgrade over the previous RCBS Trim-Mate. The new Brass Boss includes tools for all six stations: inside VLD chamfering tool, outside deburring tool, primer pocket cleaners (small/large), military crimp removers (small/large), primer pocket uniformers (small/large), case neck brushes (four diameters), and a tub of dry case neck lubricant. MSRP for the Brass Boss is $189.95. We expect “street price” to be around $155.00.
COOL — World’s Biggest Cutaway Cartridge?
At the Vista Outdoor booth, we saw a 4-foot tall replica rifle cartridge. This was a real eye-catcher. Many folks looking at the giant-sized mock cartridge had never seen a 3-D cutaway like this showing the construction of the primer along with the core and jacket of the bullet. Note to Vista Outdoor — Please send one of these jumbo cutaways for our AccurateShooter.com “Man-Cave”.
WILD — $18,000 Janz Plasma Finish Revolver
Holy Mother of Mercy. This stunning Janz pistol costs $18,000. You can buy an entry-level Honda Civic for that! But does that Honda have a rainbow-colored Plasma finish like the Janz? And can the Civic swap barrel and cylinder assemblies to shoot multiple calibers? These top-of-the line Janz wheelguns are crafted in Germany in very small numbers. Just remember, beauty doesn’t come cheap.
NEW — Leica HD-B 3000 Geovid Rangefinder Binoculars
When we looked through the new HD-B 3000 Leica Geovids we were stunned. Superb clarity and sharpness. And the laser ranging was instantaneous — amazingly fast. The new Geovid HD-B 3000 delivers linear distance determination up to 3,000 yards (2,750 meters). This combo binocular/LRF has an ABC® ballistic brain inside which can output holdover, click adjustment, and equivalent horizontal range (EHR). Barometric pressure, temperature and angle are also included in the measurements. Impressive.
FUN — Selfie Time with Jerry Miculek — The Man, the Legend
Where else but SHOT Show in Las Vegas can you get a selfie with the world’s greatest revolver shooter, the legendary Jerry Miculek. Jerry was signing autographs at the Hornady booth. Of course Jerry’s not just a wheelgun ace. He has been a top 3-Gun competitor and, at last year’s 2017 Industry Day at the Range, Jerry set a world rifle speed record shooting a S&W M&P15.
NEW — Lyman Brass Smith C-Frame Press
Lyman has three new cast-iron presses on display: an O-Frame Single Stage, and 8-station Turret, and this compact Brass Smith C-Frame Ideal open front press. We liked them all but we think this new C-Frame press is an exceptional value. With beefy cast-iron construction, it is much stiffer than other presses in this category. The compound linkage is smooth. The base is big enough to provide good stability. For someone looking for a second press, or a smaller press to take to the range, the new Lyman may be the right solution. Thumbs up.
WEIRD — Virtual Reality Self-Defense Simulator
At the NRA Booth, CarryGuard, the NRA’s insurance program, had a half-dozen high-tech Virtual Reality simulators. Visitors could put on a pair of VR goggles, and then experience a variety of threat scenarios. This helps gun owners recognize true threats and respond in a proper manner. We like the cool Virtual Reality technology, but it still seemed weird to see grown men wearing goofy VR headgear and waving their arms around like circus clowns.
BAD ASS — Victrix Heavy Metal Tactical Rifles
Victrix is an Italian rifle-maker that shows that has proven that the USA doesn’t have a monopoly on seriously “Bad Ass” weaponry. We saw a trio of Victrix Minerva Tactical rifles that look tough enough to survive the Zombie Apocalypse with ease. The Minerva’s beefy carry handle under the fore-end is an interesting feature — something similar might come in handy for big ELR rigs.
SMART — Burris Spotting Scope with Accessory Red Dot
Can you see an extra feature fitted to this Burris Signature HD Spotting Scope. Yep, that’s a Burris Red Dot Sight on the left side near the eyepiece. Smart idea — this helps you align the spotter quickly, particularly in low-light situations. After seeing this rig, we’re wondering how we might attach a red dot to our older spotting scopes. Hats off to Burris for this clever optics upgrade.
NEW and TEMPTING — Tikka T1x Rifle in .17 HMR
When we first revealed the impressive new Tikka T1x rimfire rifle in .22 LR, some readers said: “Well the .22 LR version is nice but will it be available in .17 HMR? That’s what I really want”. Well ladies and gentlemen, Tikka WILL sell a 17 HMR version of the T1x (see above). We saw this on display at SHOT Show and smiled. This gun has a very nice trigger, smooth running bolt, and the magazine is easy to seat (unlike some other recent rimfire rigs). Fitted with a nice 3-18X scope and bipod, this could be a great carry-around varmint rifle. We hope to test one this spring.
* NOTE: With some cartridge types for which Lapua brass is not currently made, other brands of brass may be used. However, most Berger Ammunition will feature Lapua brass.
Here’s a great Do-It-Yourself project for tactical shooters. Ed and Steve of the 65Guys.com have created a versatile wooden barricade designed for easy transport. The goal with this design was to create a stable barricade that offers a variety of shooting positions, but can also fit in the bed of a pick-up or the back of an SUV. The 69″ tall barricade is hinged in the middle, so it’s just 27″ wide. To deploy the Barricade you simply fold it open and then nest the lower wings in ground-level stands.
We call this the BYOB Project — Build Your Own Barricade. Anyone with basic wood-working skills should find the Barricade prettyeasy to make. The only tricky part is cutting the side Dado joints for the left and right lower wings. But when you’ve got it completed, you have a low-cost unit that is versatile and sturdy yet easy to pack in a truck and carry out on the range. In the video below the 6.5 Guys showcase their Gen 2 barricade and explain how to build one just like it.
Looking at the 6.5 Guys Modular Barricade
The Modular Barricade was drawn up by Steve in PowerPoint and then dimensions added. Once the entire plan was created, Steve cut components to size and then used ordinary wood screws and wood glue to assemble the barricade frame. This was done to ensure maximum rigidity due to the light weight construction using 2″ x 2″ frame members. A long piano hinge was used to allow the Barricade to fold in half, while still having high torsional rigidity. Each of the Barricade openings are 12″ x 12″ square. This consistent ‘window’ spacing allows interchangeable panels with different cut-out shapes to be placed at varies heights/locations in the Barricade.
Modular Barricade Key Features
— Lightweight construction using low-cost 2×2 wood beams.
— Collapsible frame with center hinges for easy transport and deployment.
— Multiple Support levels at 6″ vertical intervals (6″ variance R to L).
— Modular port design allows ports to be changed and moved as desired.
6.5 Guys’ Modular Barricade — Construction Tips
The Modular Barricade can be constructed over a weekend with the proper materials and basic shop tools such as a power saw and electric screwdriver. Steve used a router for the side panel dado joints but a table saw could also be used for that task. Steve’s only real issue with the build involved the port panels — getting them to fit right. The 2″ x 2″ frame wood wasn’t always straight; even a small variation in the wood could cause a port panel to be too tight or too loose. Steve had to do a lot of extra sanding and planing to get the port panels to fit just right.
Where and How to Use the Barricade for Training
Because the 6.5 Guys’ Modular Barricade is so easy to move, you can simply pack it up and deploy it at your local range for practice. (Do ensure club/range rules allow shooting from barricades.) While the Barricade is designed to sit on the natural ground, the base stands can also be placed on concrete if your range does not allow deployment forward of the normal firing line. While you can use the Barricade for training on your own, Ed and Steve say novice shooters can benefit from a formal clinic.
In the video below, the 6.5 Guys discuss precision rifle training with Scott Satterlee, an instructor with Core Shooting Solutions. This video explains why new shooters should consider enrolling in a formal training clinic. Topics covered are: typical course format and “curriculum”, the gear needed to participate in a precision rifle clinic, and skills shooters should practice before attending the clinic.
Many of our readers are thinking of trying out PRS-type competition. Tactical matches are becoming more popular every season. Along with F-Class, tactical/practical disciplines are the fastest-growing forms of competitive rifle shooting. Rich Emmons, one of the founders of the Precision Rifle Series (PRS), has written an insightful article about getting started in the tactical game. This will help PRS novices pick the right equipment and understand the game. Here are highlights from Emmon’s “PRS — Intro to Competition” article, originally published on the PRS website. You may also want to read the current PRS FAQ Page.
Precision Rifle Series — Intro to Competition
by Rich Emmons, PRS President
Tactical Shooting with a precision rifle is not like other disciplines, there is no set course of fire or format. That is what makes it so fun!
First, you have to ask yourself what do you want to accomplish. When I was introduced to long range shooting, immediately a light turned on for me, once I saw how easy it was to hit 300–600 yard targets. What I quickly learned from my first competition and the many that followed was there is so much to learn and shooting in competition put everything you thought you knew to the test. So back to the question: “What do YOU want to accomplish?”. The reality is you may not know yet, you just think it is cool to have a bad ass rifle and scope that can make almost any shot. Now if you’ve got that rifle and scope, it’s time to take it to the next level.
Watch PRS 2016 Championship
Getting Started — What to Expect
If you’re reading this, you have probably already have been bitten by the long range shooting bug. It can seem quite intimidating to just jump in with a new bunch of shooters you don’t know and shooting lingo you don’t quite understand yet. But here is the key — show up and shoot! I guarantee you if you show up to a match as a new shooter, other experienced shooters will guide you along and give you help on anything you need.
AUDIO: Click Button to hear Rich Emmons Talk about the Precision Rifle Series.
Now, a couple things you should just expect. You’re not as good as you think you are. Don’t expect to come into your first match and beat all the veterans. That just doesn’t happen unless you have had some really good coaching or other shooting competition experience to get you ready for this type of competition. If possible, find a local rifle club that has monthly long range matches, or any type of match will help prepare you for a larger PRS event. Getting involved with a rifle club and starting out shooting monthly matches is definitely the way to jump into competition shooting.
The Gear You Need
The first question that many ask is: “What kind of rifle/caliber/scope do I need?” The easiest answer to this is, the best you can afford. It’s no secret the gear is expensive. It took me several years of buying sub-par gear and eventually trading up to figure this out. Now, a guy can get a real sense of pride of doing it on the cheap, or with a factory rifle. I’ve seen many old Savage 10FPs take down custom rigs that cost 10 times as much. And if that’s all you can afford, then eventually you will learn the limitations of yourself or your gear. As for choice of cartridge/caliber, the respected Precision Rifle Blog has analyzed three years worth of match results (2014, 2015, 2016) from the best tactical shooters in the nation. CLICK HERE to read an article that reveals what the “top guns” use. (CLICK HERE for PRB cartridge survey covering 2012-2014.)
Making Good Ammo
Producing quality reloads is something you have to master. It’s not hard at all, you just have to pay attention to detail, and eventually you are going to do something stupid like mis-priming your brass, or skip a row of brass when dumping your powder. Everybody has their own horror story of some reloading failure that cost them a stage or even a match. So load to perfection, work with your rifle to find what load it likes the best, then start your practice.
Practice Makes Perfect
You want to become ONE with your rifle, learning everything you can about its functionality. Getting comfortable with the operation of your rifle is key. Learn the feel of your trigger, dry-firing until you wear the paint off your bolt handle. Learn how the rifle works best — pay attention to little things like the sound and feel of the bolt feeding a round from the mag (or when it doesn’t). Learn how to remove a jammed round quickly, learn how to reload a magazine quickly. Learn to scan across a field and find targets in a quick manner, seeing the targets with your eye and coming into the scope on target. These are some of the basic practices that separate the new shooters from the seasoned ones.
We’ve always liked the capacious, durable range boxes from 
This scope is available in both Mil and MOA versions. Click values are 0.1 MIL, or 1/4 MOA. A variety of illuminated, First Focal Plane (FFP) reticles are offered: SKMR3, SKMR, MSR2, Mil4+, MOAK. Notably the parallax control is coaxial with the elevation turret (meaning it is centrally mounted). You adjust parallax by rotating a large-diameter control that runs around the base of the elevation turret. We know that south-paws really like that feature.
