Hornady Offers Custom Dies
How would you like a full-length sizing die perfectly fitted to your fired brass? At one time that required you to purchase a die blank, a special undersized reamer (a chamber reamer is too big), and send the work out to a skilled gunsmith. You could expect to have $250-$350 tied up in your custom die when all was said and done.
Now Hornady’s custom shop offers a much less expensive alternative. For roughly $75-$90, plus shipping, Hornady will produce a custom-made die based on your reamer print, spec sheet or fired brass. You can either order a conventional non-bushing FL die, or a FL die that uses bushings to size the case-necks. To order, we recommend you send 3 or 4 fired cases along with a reamer print to Lonnie Hummel at Hornady Mfg., Box 1848, Grand Island, NE, 68802. Give Lonnie a call first at (800) 338-3220, ext. 208, to discuss design details and get an estimated delivery date.
Lonnie and his team of skilled machinists have produced custom dies for many top shooters. Scott Parker had Hornady produce a custom full-length die for Scott’s 6BRX. Scott reports: “The die is great. I’m very impressed. The die is a perfect fit for my brass and the sized brass has very low run-out.” Past F-Class Champion John Brewer has a set of Hornady custom 6-6.5×47 Lapua dies on order currently.
Hello
I need a body die for my 30×47 Lapua? I’ve been using 30BR lapua dies for seating, neck & bumping the shoulder. Can you tell me where to get one please? A 6.5×47 lapua with a 30cal neck.
Regards
Bob