May 9th, 2011

New Low Boy Benchrest Stock from Precision Rifle & Tool

Ray Bowman of Precision Rifle & Tool LLC (PR&T) has a new stock design, the Low Boy Benchrest, that combines the successful features of PR&T’s F-Class stock with a rear end better suited to shooting from the bench. As you may know, PR&T’s F-Class stock, in the hands of Charles Ballard and others, has been hugely successful in F-Class competition. The new Low Boy Benchrest stock borrows the same low-profile front end, but it is different from the tang rearward.

While the Low Boy F-Class stock is designed so you wrap your thumb around (like holding a pistol), the Low Boy BR stock is designed so you can slip your hand along the side, with thumb rested lightly behind the tang, in a central position. Unlike the F-Class stock, which is designed for full grip “hard-holding”, this stock is designed for shooting with a “light hold” style (or even free recoil). These stocks are very straight dimensionally, so they track well.

We think this stock will work very well for 600-yard and 1000-yard Light Gun Benchrest competition. This Editor likes the stock enough that I am considering using a Low Boy Benchrest stock for a future Light Gun project with a Stiller Viper Drop-Port. The Low Boy BR stocks are affordable — starting at $330.00 for an un-inletted version with a 3″-wide fore-end. Inletting adds just $25.00 to the total. PR&T can also pillar-bed your action in the stock for an additional $225.00.


Handsome Bat-Action BRX in Low Boy BR Stock
The blue-stocked rifle in the photos belongs to FORUM member Bo W. (aka “Sighter”). It is a 6BRX with a BAT MB, multi-flat action. The finish and painting work on the PR&T Low Boy BR stock was done by Tuck. Sighter rates the stock highly, but he thinks the standard configuration sits a bit high in the back: “I like the stock and it tracks fine, but I feel the F-Class style height causes it to ride a bit higher in the bags than needed. I talked about this with Ray Bowman [PR&T owner] and have since ordered two more Low Boy BR stocks. With the last two, Ray cut about 3/4″ off the bottom of the stock butt and kept about a .67″ flat so a double-stitch bag will work. It is now more similar to a Tracker.” Shown below is a Low Boy BR stock with the reduced height option.


Similar Posts:

Tags: , , , , , , ,