February 26th, 2012

Gear Review: Compact Combo Press from the Harrell Brothers

If you’re looking for a solid, beautifully fabricated loading press that can do double-duty at home AND at the range, consider the Combo Press from Harrell’s Precision, run by brothers Lynwood and Walter Harrell. Though it is very compact, it has plenty of leverage to full-length-size cases. The Harrell’s Combo Press works BOTH as an arbor press and as a standard press that functions with shell-holder and conventional screw-in dies. The arbor section on the left is tall enough to hold a Wilson micrometer-top seater. The threaded die section on the right has enough clearance for .308-sized cases.

One of the best features of the Combo Press from Harrell’s Precision is its sturdy clamp. This mounts solidly to a wood loading bench or table top. It also has enough vertical clearance between the jaws to work with most range benches. Forum member Boyd Allen has written a detailed review of the Harrell’s press, with additional photos by Paal Erik Jensen of Norway. The Harrell’s Precision Combo press retails for $295.00. That’s pretty pricey, but consider that it can replace BOTH an arbor press and a standard press. CLICK HERE to read full COMBO PRESS REVIEW

Combo Press Has Plenty of Power to Bump Shoulders
This Editor has loaded ammo with this press and I can say it performed well. It actually bumped shoulders on fired 6BR brass more easily than a larger cast-iron press we have in our loading area. I attribute that to the fact that the threads for the die are very precise and the shell-holder seats firmly on the ram, with no slip. Seating with a hand die (on the left side of the press) yields repeatable results, although I have to say I get better “feel” with a good Arbor press, such as those made by 21st Century, K&M, or Sinclair Int’l. I also like the availability of the seating Force Gauge on the K&M Arbor.