Clean Your Barrels in Seconds with New Powered Bore-O-Matic
Are you tired of messing with cleaning rods, bore guides, stinky solvents, and messy JB patches? Can’t wait hours for bore-foam products to work? Well now there’s a new solution ideal for all pistol, shotgun, and rifle shooters. With the new Bore-O-Matic cleaning machine, you can clean your barrels in seconds. Remove copper, powder fouling, and even hard carbon in one ultra-fast operation. The Bore-O-Matic uses a self-deploying snake fitted with a bronze brush to instantly rout out all types of fouling. A powerful 0.5 horsepower electric motor spins the brush at 200 rpm as it snakes its way through your bore, eating away fouling, and leaving a “squeaky clean” interior finish in its wake.
The Bore-O-Matic is easy to use. Simply squirt your favorite solvent* in the barrel, fire up the motor, and let the Bore-O-Matic power its way down your barrel. In seconds you’ll have a perfectly clean bore. Since the Bore-O-Matic’s flexible drive shaft is plastic-coated, no harm can be done.
Bore-O-Matic inventor Tom Bugiardo says that the Bore-O-Matic is perfectly safe for your fine match barrels. “We’ve seen how top competitors brush their barrels like crazy, and frankly, we’re just doing the same thing, but with a motor to minimize the labor.” Additionally, Bugiardo says that the bronze brushes used on the Bore-O-Matic can’t possibly harm your bore. “We all know that bronze is softer than steel so there’s absolutely no risk”. Some potential buyers were worried about the rapidly-spinning bore brushes rounding off the edges of lands or damaging the crown. “Horse-pucky” says Bugiardo, “We’ve researched this extensively on internet gun forums, so we’re 100% confident that running a powered bronze brush at 200 rpm down your barrel can’t harm a thing. Trust us.”
Because the Bore-O-Matic spins as it runs down the bore, gyroscopic forces self-center the cleaning brush. So, no cumbersome (and expensive) bore guides are needed. “Just feed that puppy right down the barrel, and say ‘goodbye’ to barrel fouling forever”, says the inventor.
Along with the $189.99 benchtop Bore-O-Matic unit, a smaller $99.99 hand unit is available. When working in tight spaces, or when cleaning at the range, the battery-powered Bore-O-Matic “Hand-Jobber” is ideal. The Bore-O-Matic handheld unit conveniently fits in a range box and runs off long-lasting, rechargeable Lithium-Ion batteries.
With the compact Bore-O-Matic “Hand-Jobber” you can also easily dip the attached cleaning brush in a tub of JB or Iosso bore cream. Bugiardo tells customers: “Slather that JB on your brush and run ‘er right in the muzzle if you want a mirror finish in your bore. Remember, nothing says ‘pride of ownership’ better than a bore that shines like a spit-polished diamond!”
Currently the Bore-O-Matic is available only from Bugiardo’s company, TB Plumbing Supplies, in Lizella, Georgia (no website yet). Bugiardo expects the product will soon catch on with shooters nationwide and it will be carried by major retailers and online webstores.
*With its high-speed rotary brush, the Bore-O-Matic is so efficient that you don’t need expensive, specialty solvents. Bugiardo uses a simple solution of Windex, Ammonia, Drano Gel, and baking soda. “Makes my barrels shine, inside and out”, Bugiardo says.
Similar Posts:
- USAMU Talks about Pull-Though Bore Snakes
- When and How to Use Bore-Snakes for Barrel Cleaning
- Smart Advice on When and How to Use Bore-Snakes for Cleaning
- TECH TIP: When and How to Use Bore Snakes
- New Bore-Tips Foam Bore Swabs for Barrel Cleaning
Share the post "Clean Your Barrels in Seconds with New Powered Bore-O-Matic"
Tags: Barrel, Bore Cleaning, Bore-O-Matic, Brush
So glad it’s April 1st.
I believe I’ll pass on this one
Sign me up for the entire first-year production.
““Horse-pucky” says Bugiardo, “We’ve researched this extensively on internet gun forums, so we’re 100% confident that running a powered bronze brush at 200 rpm down your barrel can’t harm a thing. Trust us.””
Well, I can honestly say I have seen the “Hand jobber” “Bore-o-matic” in action. Jack Neary uses a Version of this in his cleaning regimen. His is more compact. He has a Dewey rod without the handle, chucked into a cordless drill. He runs that thing in and out for at least 20 stokes.
Well at least your not endorsing Obama this time
Happy April 1st!
I’ll take a couple hand jobbers
Certainly had me going for a sec… well done!
They’ve been doing this for decades in the French Armed Forces. The best way to clean a FAMAS or a Fr-F2 is to use a stainless steel brush dipped in the black oil that makes you laugh like you’re stoned, on an uncoated steel rod chucked on an electric drill. It makes the bore super smooth.
I always look forward to April 1st on this site!!!!!!!! Such fertile imaginations, such gifts of wit!!!!!
I’ve gotta admit, I was interested. Then I remembered that it’s April 1st, and my excitement quickly faded. I realized that this really can’t be a good idea. Or, can it?
Is the BORE-O-MATIC for real? Do a search for “Bugiardo”… and the name of that town in Georgia should give you a hint.
I’m going to try and find some brushes coated with diamond dust so the last forever. I’m going to also try to become a distributor.