Handgun Marksmanship — Diagnosing Pistol Accuracy Problems
Over the past year, this was one of the TOP TEN most-read Daily Bulletin articles. We are reprising it today for readers who may have missed it the first time around…
When shooting pistols do your shots normally land smack dab in the middle of the target? If not, you may have some technique problems that are causing your shots to move off center. Top Shot Champion Chris Cheng has produced a good video for the National Shooting Sports Foundation (NSSF) that helps handgunners diagnose accuracy issues. By shooting 3-shot groups and looking at the pattern and location of the shots, you can see what you’re doing wrong (or right). Here are some examples. Note, this process works best for shooters whose shots fall typically in one target zone. If your shots are all over the target, your form is inconsistent and problems will be harder to diagnose.
1. Low Left — Jerking Trigger: Here we see three (3) shots at the 7 O’clock position. This shows that the shooter is jerking the trigger, meaning that the shooter is pulling the trigger too quickly and therefore forcing the barrel to drop when breaking the shot. This is a very common problem, particularly with novices who are reacting to the noise/recoil of the pistol.
2. 9 O’Clock — Too Little Trigger Finger: If we see three (3) shots at the 9 O’clock position, what this can be indicative of too little trigger finger on the trigger. And therefore with every shot, the shots are getting pushed to the left. Try moving your trigger finger on to the pad of your index finger. Also try dry firing drills.
3. High Left — Anticipating Recoil: In this next example, we see three shots around the 11 O’clock position. What could be happening here is that the shooter is anticipating the recoil, and is actually lifting the gun up when he shoots. We recommend slowing down, working on your breathing, and, again, do dry-firing drills.
4. 3 O’Clock — Too Much Trigger Finger: Finally, if you see three (3) shots at the 3 O’clock position, this can indicate that there is too much trigger finger on the trigger. Therefore when the shot breaks the shooter is pulling each shot to the right. Note: Each of these descriptions is for a RIGHT-handed shooter. If you are a left-handed shooter you’ll want to reverse those descriptions.
Similar Posts:
- Handgun 101: Diagnosing Accuracy Problems with Pistols
- Pistol Skills — How to Diagnose Handgun Accuracy Issues
- Marksmanship 101: Optimal Finger Placement on Trigger
- Marksmanship Skills — Optimal Finger Placement on Trigger
- Shooting Skills: Proper Finger Positioning on Trigger
Share the post "Handgun Marksmanship — Diagnosing Pistol Accuracy Problems"
Tags: Accuracy, Chris Cheng, Handgun, Iron Sights, Marksmanship, Pistol, Pistol Training, Revolver
Very useful and simple information. I have downloaded this one and am learning it from memory.
One thing I am curious about, is how do you determine if the reason for the group being where it is, is due to shooter error or sight adjustment?
Now if you were to say shoot 12 shots and 8 land in the middle and 4 land low left than I would say yes you jerked the trigger 4 times.