This story is about safety — how you must be extra careful when shooting on public lands. Don’t assume that other people will hear your firearms or respect the posted boundaries of a shooting range. To drive this point home, we feature a video that should send chills up and down your spine. This scarey movie about two-legged creatures that appear out of nowhere… while you’re shooting. Watch this video carefully. Something happens at 0.38″ that will make your heart race. Warning: Adult language — Not suitable for playback at work.
Why You Must Always, Always Be Careful When Shooting on Public Lands…
LESSON Learned: Always be aware of your backstop and beyond. If there is any possibility of someone venturing into the “danger zone”, mark off the target area, and designate a person to watch the area around the target. That designated spotter should instantly call a halt to shooting if any person or vehicle appears. It is also a good idea to place warning signs, but don’t count on these to be headed.
This video was filmed on BLM land out in the Nevada desert. In such public areas, one must be very careful about shooting. There may be hikers, bikers, explorers, and horse-riders nearby. An offroad motorcyclist might be moving at 65 miles an hour. At that speed he’ll cover 32 yards in just one second! With that possibility, you really have to be ultra-careful. To be forewarned of potential risks, you need to watch way out to the left and right, not just focus on the backstop and the bullet’s flight path.
The shooting area shown above is located on BLM land. All BLM rules and regulations apply. Remember it is everyone’s desert so always think “safety first”. The video-maker, JFComfort (aka “Joe”), explains: “We do the majority of our shooting on BLM land surrounding the Las Vegas Valley. We have found shooting in small groups in the desert works well for us. We have spent a lot of time out there in the past. I advise you not to shoot alone and be very mindful of off-road enthusiasts. Guys on quads, dirt bikes, and Rhinos seem to pop out of nowhere. Also keep a close eye out for other shooters, not everyone is safe, respectful and courteous.”
Safety Risks Can Occur Anywhere
This kind of safety risk can appear at any shooting venue. Robert Whitley, reports a similar incident on the East Coast: “Had a situation like that happen years ago. I was shooting at 400 yards on a 500 meter range that was completely fenced. Unbeknownst to me some guys on ATVs broke through the fence so they could get across the range to a path on the other side. Heard some engine noise and held up firing and about a second later a guy on an ATV went by right in front of my target — very unnerving. The guy on the ATV was … completely oblivious to the peril he placed himself into by breaking through the fence.”
Our friends Ed and Steve, aka the 6.5 Guys seemed to be everywhere at SHOT Show. With tripods and cameras slung over their shoulders, Ed and Steve worked marathon hours, recording no less than 43 SHOT Show videos. They found all sorts of new and interesting products. They visited notable optics makers including March, Nightforce, Nikon, and Vortex. They interviewed major players in the PRS/Tactical Game including George Gardner of G.A. Precision, Tom Manners of Manners Composite Stocks, and Frank Galli, founder of Sniper’s Hide. And the 6.5 Guys also covered mainstream, large-volume rifle makers. That will be our focus here today, as we present the 6.5 Guys’ coverage of three key, long-arms builders or importers — Bergara, Legacy International, and Savage Arms.
Savage Arms — New Options for Precision Shooters
We own a couple Savage rifles, so we know Savage centerfire rifles can deliver surprisingly good accuracy for the price. It is not unusual for Savage rifles in some chamberings to shoot 0.7 MOA right out of the box. And the barrel nut system allows you to easily swap in an aftermarket custom barrel to get even more accuracy. Here the 6.5 Guys look at Savage’s new-for-2018 offerings, including the Stealth Evolution and the long-action Model 110 BA with GRS stock. A new chambering has been added — the 6.5 PRC.
Bergara — Becoming a Player in the American Market
We have been impressed with Bergara’s development as a brand in the last few years. Bergara, a Spanish company, is serious about becoming a player in the American market. The company has listened to American shooters, building hunting and tactical rifles with key features valued by American customers. Bergara rifles offer a nice combination of comfortable ergonomics with some advanced engineering, such as the B14’s internal metal chassis. In this video, the 6.5 Guys look at the latest rifle offerings from Bergara.
Legacy Sports International — Howa and Lithgow Arms
Legacy Sports Int’l is the importer/distributor for a number of rifle manufacturers, including Howa, Lithgow Arms, and Citadel. In this video, Ed looks at the Howa KRG Bravo chambered in 6mm Creedmoor. This features the smooth-running Howa 1500 action with 2-Stage HACT Trigger, set in a Kinetic Research Group modular chassis. Priced at $1279.00 MSRP with sub-MOA guarantee, it is definitely a serious contender in the PRS Factory Class. Anyone looking at a Ruger Precision Rifle should also consider this Howa.
Sometimes simpler is better when it comes to targets for fun shooting and load testing. While we normally use test targets from our Downloadable Target Page, it’s sometimes easier to just use brightly-colored “Hi-Viz” adhesive target dots.
Hi-Viz Stick-On Dots in Assorted Colors and Diameters
You can order 1″ target dots in bulk from Labeloutfitters.com. Many colors are available including fluorescent (hi-viz) Red, Green, Orange, and Yellow. These are bright and easy to see even in fading afternoon light. A pack of twenty (20) sheets (1260 dots total) costs just $5.97 (that works out to $4.74 per thousand). For the 1″-diameter stick-on dots you get 63 dots per sheet. Larger, 1.5″-diameter fluorescent dots are also available in 20-sheet packs for $5.97, with 24 large dots per sheet (480 dots total). If you want even bigger, 2″-diameter dots, sheets with 20 Hi-Viz dots per sheet are on sale for $5.97 per 20-pack(400 dots total).
Our friend Danny Reever really likes the bright dots from Label-Outfitters: “Ordered some of the 1″ dots from LabelOutfitters.com and recieved them in two days Priority Mail! Bought the flourescent red,green, and yellow and they are really nice — especially for the price.”
If you prefer smaller, 3/4″-diameter circles, Amazon.com sells Avery packs with 1008 adhesive dots for $2.69 to $6.75 per pack. Colors include Orange ($2.69, item 5465), Neon Red/Orange (item 5467), Neon Yellow (item 5470), Neon Green (item 5468), and Bright Blue (item 5461). We recommend the Neon Red/Orange for most uses, or the Neon Yellow dots for use on a black background. There is even a dispenser-box option with 1000 3/4″ dots on a roll in a box for $9.99. Amazon.com also offers 1″, 1.25″, and 2″-diameter target pasters in 500-dot and 1000-dot rolls. The best deal is a dispenser of 1000 1″ dots for $11.99.
Half-Inch Fluorescent Dots for 100-200 Yards
For close-range work, you may prefer 1/2″-diameter dots. Forum member Steve found a source for very small 1/2″ dots: Uline.com. The 1/2″ dots are available in a wide variety of colors including fluorescent Red, Pink, Yellow, and Green. Price is $12.00 for a roll of 1000 dots (item S-2063). Steve notes: “A 1/2″ circle at 300 yards is not quite entirely covered by Nightforce crosshairs at 42-power (I’d say 70% coverage). I.e., it seems easier to line up repeatedly than with the bigger (3/4″) circles, which I used to use. Note that, for me, neon green and neon orange work best on brown cardboard targets. Neon orange works well on white paper.”
The Berger Southwest Nationals (SWN) is coming up next week at Ben Avery in Phoenix. Many of the nation’s top F-Class shooters will be there. Here are some tips that can help F-TR shooters competing at the SWN. These suggestions will also benefit any F-TR shooter who is looking for a more stable set-up under his bipod, and easier adjustment of the vertical when using a Phoenix-style (non-joystick) bipod.
How to Set up a Stable Front Pad for Your F-TR Bipod
To get peak performance from your F-TR rig, you need good support under the bipod. You want the base to be firm, but you also want a smooth, low-friction surface so the bipod feet can slide properly. Some guys just shoot off a carpet or a slab of wood with some rubber on top. There is a better way.
Forum member PBike shows how a three-element front set-up offers the best of both worlds — a firm platform with low-friction top. PBike’s set-up has three elements. Layer 1 is a thick rubber mat. Layer 2 is a steel plate with thin neoprene glued top and bottom. Layer 3, on which the bipod feet rest, is a thin neoprene door-mat with a low-friction surface, like the top of a MousePad. The video below shows how the three layers are arranged.
Pbike explains that, under F-TR rules, “You can use any series of pads or plates, so long as they are flat and do not include [tracking channels/slots] for the bipod feet”. The plate can be 12″ fore and aft, and the overall width may not extend more than 2″ beyond the bipod feet on either side.
F-TR Bipod Support Components (Bottom to Top)
LAYER ONE (bottom): Thick Rubber Pad, such as a heavy doormat
LAYER TWO (middle) Steel Plate, approximately 12″ x 24″, with attached neoprene
LAYER THREE (top): Neoprene Upper pad (slick upper surface like a MousePad)
NOTE, if the surface is not level, you can use wood shims to level the surface both left to right and front to back. The shims slide under the lowest pad. With a small saw, these can be trimmed so they don’t extend past the pad’s dimensions, maintaining compliance with F-Class rules.
The Phoenix bipod is an excellent product, but some folks like to run their rifles lower for better tracking and less hop. This can be accomplished with the PBike Aetkinz Engineering Lowering Kit. That Kit lowers the entire assembly 1.7 inches. For more information contact Pbike257 [at] gmail.com.
Phoenix Bipod “Rear Drive” and Steering Kit
F-TR rifle stock fore-ends are getting longer, allowing competitors to mount their bipods further forward. This longer “wheelbase” can deliver more stability, less hop, and better tracking. There’s a problem, however — if the bipod is attached way out front, it can be difficult to reach the bipod’s elevation controls. Some shooters grab the back end of the ski foot to adjust the rifle’s lateral position, but that doesn’t help with vertical.
PBike has developed a new accessory that lets you adjust the Bipod’s Mariner wheel easily and precisely. Basically this is a rotating, anodized aluminum tube that extends rearward. It has a 90° gear drive that replaces the Mariner wheel, allowing vertical adjustment by rotating the tube clockwise or counter-clockwise. See how it works in this video, starting at 1:40:
Pbike explains: “This is a really comfortable way to shoot. With this handle I can adjust for elevation and I can also steer the rifle fore and aft, left/right — anywhere I need to. I can make minute adjustments up and down, as needed, with the knurled handle.”
Video Suggestion by Boyd Allen. We welcome reader submissions
The U.S. Marine Corps will be adopting a new rifle to replace the M4 select-fire carbine. Designated the M27 IAR (Infantry Automatic Rifle), the new rifle is based on Heckler & Koch’s HK416, which looks like an AR, but runs with an internal gas piston system. The HK416 has been used by the German Army and some USA Special Operations units. This change-over has been in the works for some time, but the “protest period” has concluded, so now it is official.
The adoption of the M27 was announced at SHOT Show 2018. GunsAmerica reports: “H&K has officially received the contract for the USMC to replace the M4 carbines. The H&K model selected is the M27 Infantry Automatic Rifle, a derivative of the famous H&K 416″. The U.S. Marine Corps initially planned to purchase 6,500 M27s to replace a portion of the M249 light machine guns employed by automatic riflemen within Infantry and Light Armored Reconnaissance Battalions. In December 2017, the Marine Corps revealed a decision to equip every Marine in an infantry squad with the M27, so this is a major change. (Source: Wikipedia.com.)
According to Wikipedia: “The M27 is a lightweight, magazine-fed 5.56mm, select-fire weapon based on the Heckler & Koch HK416. It features a gas-operated, short-stroke piston action with a rotating bolt and a free-floating barrel. The handguard has four MIL-STD-1913 Picatinny rails for use with accessories and optics. The simpler gas-piston rifle system reduces the amount of time it takes to resolve malfunctions on the IAR compared with the M249 light machine gun.”
CLICK HEREfor full-screen M27 Photo by Heckler & Koch.
As deployed, early versions of the IAR have done well in combat: “The IAR was initially fielded in December 2010. 1st Battalion 3rd Marines were deployed to Afghanistan in April 2011 with 84 IARs. Former SAW gunners initially did not like the M27, but appreciated it as time went on. It weighed 9 lb. loaded, compared to 22 lb. for an M249 — a significant difference when on 5-hour long missions. It also blended in with standard M16-style service rifles, making it difficult for enemy forces to identify the machine gunner. Marines issued with the M27 [report] it is friendlier to troops [than the M249] due to its cleaner, lightweight system having fewer moving parts and jams. IAR gunners consider the rifle-grade accuracy to be a huge improvement over the SAW, despite the loss of sustained firing.” (Source: Wikipedia.com.)
Heckler & Koch Expands American Production Center in Georgia
Heckler & Koch operates a production center in the state of Georgia, not far from Fort Benning. A $28.5 million expansion, started in 2017, is adding a new 50,000-square-foot factory in the Corporate Ridge Business Park. “HK’s new U.S. factory will make use of advanced manufacturing technologies and will be staffed by German and American engineers and technicians,” said Francisco Hidalgo, CEO of HK USA. GunsAmerica notes: “H&K USA will be designing and building guns directly for the U.S. market in the USA now. Now, we can look forward to weapons built specific to the U.S. market. [We] can’t wait to see the first one stamped ‘Made in Georgia’.” It is unknown when H&K will start delivering American-made M27s to the USMC.
Tactical competitor Zak Smith stores his elevation and wind drift data on a handy laminated data card. To make one, first generate a come-up table, using one of the free online ballistics programs such as JBM Ballistics. You can also put the info in an Excel spreadsheet or MS Word table and print it out.
Above is a sample of a data card. For each distance, the card includes drop in inches, drop in MOA, drop in Mils. It also shows drift for a 10-mph cross wind, expressed in inches, MOA, and mils. Zak explained that “to save space… I printed data every 50 yards. For an actual data-card, I recommend printing data every 20 or 25 yards.” But Zak also advised that you’ll want to customize the card format to keep things simple: “The sample card has multiple sets of data to be more universal. But if you make your own data card, you can reduce the chance of a mistake by keeping it simple.”
Once you have the card you can fold it in half and then have it laminated at a local office store or Kinko’s. Keep this in your pocket, tape it to your stock, or tie the laminated card to your rifle. If you regularly shoot at both low and high elevations, you may want to create multiple cards (since your ballistics change with altitude). To learn more about ballistic tables and data cards, check out the excellent “Practical Long-Range Rifle Shooting–Part 1″ article on Zak’s website.
Scope-Cover Mounted Ballistics Table
Another option is to place your ballistics card on the back of the front flip-up scope cover. This set-up is used by Forum member Greg C. (aka “Rem40X”). With your ‘come-up’ table on the flip-up cover you can check your windage and elevation drops easily without having to move out of shooting position.
Greg tells us: “Placing my trajectory table on the front scope cover has worked well for me for a couple of years and thought I’d share. It’s in plain view and not under my armpit. And the table is far enough away that my aging eyes can read it easily. To apply, just use clear tape on the front objective cover.”
What if we said you could buy a brand new, quality 9mm handgun, AND 1000 rounds of American-made, brass-cased CCI 9x19mm ammo for under $430? Or get the pistol plus 350 rounds for under $320? Not possible? Yes it is. Here’s the deal:
Chambering: 9×19 mm (9mm Luger)
Action: DAO, 5.5 lb pull weight
Capacity: 7+1
Barrel length: 3.565″
Frame: Black polymer with 4140 steel inserts
Magazine: 7 round stainless (included)
Slide: 416 stainless steel with matte finish
Overall length: 5.90″
Overall width: 0.90″
Overall height: 4.50″
Overall weight: 15.8 oz.
Or Get the Even More Compact Ruger LC9s for $259.99
If you want a more compact 9mm semi-auto pistol, Sportsman’s Guide also has the Ruger LC9S for $259.99 ($246.99 member price).
Both these guns are light, slim, and reliable. The Kahr has a longer, smoother trigger pull. The Ruger is thinner and shorter, and can be purchased with a thumb safety. Bottom line — there are both excellent carry guns. Both pistols are reviewed in this video:
If you prefer a German-made gun, get the Walther Creed for $269.99. We like the grip on the Walther. It has a very short trigger reset. Like the Kahr CW9 and Ruger LC9s, the Creed represents an exceptional value.
With any of these options (Kahr, Ruger, Walther) you can get your gun and 1000 rounds of ammo for less than $450.00. 1000 rounds should last all year, even if you practice every other week.
The Swarovski Optik website features a blog with interesting technical articles. In the “On Target” series of blog stories, Swarovski has provided a handy explanation of how optics systems work, with exploded diagrams of rifle scopes, spotting scopes, and binoculars. CLICK HERE for Swarovski Optics Blog.
Scope Terminology Focusing Lens
The focusing lens is an adjustable lens inside the optical system for focusing the image at different distances…. In the case of rifle scopes, apart from focusing, the focusing lens also facilitates parallax compensation.
Diopter Adjustment
For rifle scopes, the reticle can be focused using the diopter adjustment on the eyepiece, thereby correcting any visual impairment. [Editor’s Note: Movable eyepiece diopter adjustment is not offered on all rifle scopes. It is a useful feature on Swarovski and other premium scopes. This allows shooters who need eyeglasses to get a sharply focus image even without wearing corrective lenses. Of course shooters should always wear ANSI-certified eye protection. With the diopter, folks who need correction can use inexpensive, non-Rx safety eyewear instead of expensive prescription safety glasses.]
Reversal System
The purpose of the reversal system is to reverse the image by means of prisms in binoculars and telescopes, and lenses in rifle scopes….The lens reversal system is needed in rifle scopes to control the variable magnification and move the exit pupil[.]
Parallax Explained
What is Parallax? What problems can Parallax create when you are shooting? Many novice shooters can’t answer those questions easily. Likewise, many folks don’t understand how to use their front or side-focus parallax controls most effectively. Yes the parallax control basically sharpen focus at different target distances — but there’s more involved. This video offers helpful insights.
Resource tip by EdLongRange. We welcome reader submissions.
If you plan to travel far from home this year with firearms, then you should research legal requirements before you head to the airport or hit the road in your car or truck. To help Road Warriors, The Shooting Wire website recently published an excellent article concerning Travel with Firearms. This helpful article by Joe Balog features smart advice from 3-Gun competitor Rich Yoder.
Here are Highlights from the Travel with Firearms Article…
Traveling by Road:
Regulations for transporting firearms in a vehicle vary from state to state. Some are quite lenient, while others are much stricter. Within many states, gun transportation laws also vary considerably from jurisdiction to jurisdiction. If possible, keep your gun cases locked in your vehicle’s trunk or truck bed, as long as your bed has weather-tight and lockable security. If your guns are outside the passenger compartment, in a case, unloaded, and kept separate from ammunition, you’ll be in compliance with all but the strictest of local and state gun laws.
Traveling by Air:
When checking in at the airport, travelers need to declare that they are traveling with a gun. At that point, airline personnel will quickly advise the traveler of the need to open his or her case and inspect the firearm. Always wait for the TSA inspector before unlocking or opening the case, and only do so when clearly directed to do so by TSA personnel. Never take a firearm out of its case in an airport.
You have the right to remain with your firearm at all times during the inspection process. Never leave your firearm until the inspection is complete, the case has been re-locked, and you are in possession of the key or combination.
Traveling Overseas:
There are additional steps during international travel. Specifically, guns must clear customs in the destination country, and once again when entering back into the United States. Multiple government forms may need to be completed and carried with the firearm, like U.S. Customs Form 4457. Be sure to check into all required paperwork well before traveling.
Hi-Viz Stick-On Dots in Assorted Colors and Diameters
Scope-Cover Mounted Ballistics Table
