Tired of messing around with neck bushings? Is there a simpler (and potentially better) solution for controlling case neck tension? Yes there is — the precision honed non-bushing die.
You can purchase a Forster non-bushing Full-length sizing die for many popular cartridge types for under $50.00. Then you can send that die to Forster, and Forster will custom-hone the neck for a $24 fee (includes return shipping). When done right, the honed FL die can load ultra-straight ammo with the precise next tension you prefer for your brass and bullet choice.
Alternative to Bushings — Honed Full-Length dies
Conventional, non-bushing full-length sizing dies can create ultra-accurate ammo with very low run-out. For some applications, we prefer a non-bushing FL die over a bushing die — so long as the neck tension is correct. But many FL dies have an undersized neck diameter so you end up with excess neck tension, and you work the brass excessively. Forster offers a simple, inexpensive solution — honing the neck diameter to whatever size you want*.
If you purchase a Forster non-bushing, full-length sizing die, Forster will hone the neck dimension to your specs for $24.00 including return shipping. This way you can have a FL die that provides the right amount of tension for your particular load. (The max amount of diameter change Forster can do is about .008″) Forster dies are relatively inexpensive so you can afford to have a couple of FL dies with necks honed to different diameters — such as 0.266″ and 0.267″ for a no-turn 6mmBR. The die itself is fairly inexpensive — currently Precision Reloading charges $44.54 for a Forster 6mmBR FL sizing die (Forster Part #018121).
Forster FL dies, necks honed to .265″, .266″, and .267″.
Steve Rasmussen of IowaHighPower.com gave this a try. In fact, he had three dies made — each with a different neck dimension. Here’s his report: “My original Forster 6BR FL die sized the necks down a lot [to about 0.260″]. I sent my die in and asked if they could supply two more FL dies (for three total) to have the necks honed to 0.265″, 0.266″, and 0.267″.” In addition to the purchase cost of two more FL-sizing dies, Steve paid $36 ($12 per die) for the three dies to be honed.
Steve’s honed dies produced very straight loaded ammo:
“Brass springback after sizing is running 1 to 1.3 thousandths. My loaded rounds are running 0.2697-0.2699 using [older Gold Box Lapua brass]. So far the dies are working well. I sized 80 cases with the 0.266″ necked die. The shoulder is running 0.4582″ and 0.300″ up from the base is 0.4684". I spun 20 of ‘em and 16 had a runout of one thousandth (0.001) and the other 4 at 1.5 thousandths (0.0015).”
We custom hone the inside neck diameter by using a diamond stoning process. We enlarge the inside diameter to your specification to prevent over-sizing of the case neck due to thick neck walls. You may require this service for multiple reasons: 1) If you use some brands of brass cases which have thicker neck walls. 2) If you do not intend to outside neck turn case necks that have thickened after repeated firings. Please specify desired inside neck diameter. Note: 1) No more than .008″ stock removal from your existing die neck diameter is possible. 2) Honing is done in increments of one half thousandth of an inch (.0005″), meaning that your specified inside diameter must be either.XXX0″ or .XXX5″. FEES: $24.00, includes shipping within continental U.S. (lower 48 states). Please allow 1-3 weeks
Share the post "The Honed-Neck FL Sizing Die Option — Alternative to Bushings"
Now through July 15, 2020, Zeiss is running a great promotion. When you buy a Zeiss Spotting scope you will get the outstanding, highly-rated Zeiss Victory Pocket binoculars for FREE. Or, if you purchase the Zeiss Victory SF binoculars Zeiss will kick in a second Zeiss Terra ED binocular unit for FREE. Either way, this is a compelling promotion for anyone looking for high-quality European optics.
The spring 2020 promotion runs from Apri1 15 through July 15, 2020, and supplies are limited. For the next 90 days, Zeiss will be offering fantastic incentives for the spring season through participating Zeiss authorized retailers. Zeiss states: “Now is the perfect time to consider a new super premium spotting scope for the spring and enjoy the true benefits of a Zeiss Victory Pocket binocular[.]”
The Zeiss Victory Harpia spotting scope pairs with a slim eyepiece that offers comfortable viewing and features a bayonet mount for safe and secure lock-up upon installation. The DualSpeed™ focus enables automatic switching between rapid and fine adjustment for fast and precise focusing. The LotuTec® coating ensures a clear view in all weather conditions.
The innovative Victory Pocket unit (shown above) represents up to a $880 retail value. This design uses an offset hinge to fold very compactly. The glass is excellent — our Editors have tested these. Redemption of the Victory Pocket 8×25 or 10×25 binocular will be at time of purchase.
PROMO TWO — Buy Victory SF Binocs, Get Terra ED Binocs Free
Withe the second Zeiss Spring 2020 Promo, you receive a FREE Zeiss Terra ED binocular with purchase of a Zeiss Victory SF binocular. That Terra ED is worth up to $500 retail value. Redemption of the Terra ED 8×42 or 10×42 will be at time of purchase.
Zeiss states: “Zeiss Victory SF binoculars bring unbelievable clarity and viewing comfort to year-round glassing and wildlife observation. These binoculars provide an exceptionally wide field of view, fast and precise focusing, and … the highest image resolution. They feature the Zeiss exclusive ErgoBalance™ concept that allows for hours of fatigue-free nature observations.”
Share the post "Zeiss Spring Promo — Free Binoculars with Zeiss Spotting Scope"
Here’s some good news about rifle shooters enjoying an early March competition before Executive Orders forced people to stay at home. We can report that the first-ever springtime CMP Western Games were well-attended. Nearly 300 shooters enjoyed the event, though the High Power matches and clinic phase was cancelled due to official social distancing mandates.
By Ashley Brugnone, CMP Writer
With the first run in its new March time slot, the Civilian Marksmanship Program’s (CMP) annual Western CMP Games and HP Rifle Matches event was met with greatly-increased registration and attendance compared to recent years, despite social distance restrictions that led to a premature end to the event.
Competitors completed the entire schedule of CMP Games rifle events and schools at the Ben Avery Shooting Facility under brilliant Arizona skies and comfortable temperatures. Unfortunately, the 5-day CMP High Power Rifle Matches and clinic, scheduled in the second half of the schedule, were cancelled due to health concerns — “social distancing” mandates for participants and staff.
The Western CMP Games portion of the event held in Phoenix is one of many travel events conducted by the CMP across the country each year. It includes specially designed vintage and modern rifle matches and clinics affording opportunities for marksmanship enthusiasts of all ages and experience levels.
A spike in early registration of 283 participants led to an impressive number of 664 scheduled event entries for the early Spring event in Phoenix. Since its first Arizona appearance in 2008, the Western CMP Games events have been conducted in the month of October. Due to recurring inclement weather at the CMP’s annual Oklahoma Games, the decision was made to trade seasons with those in Arizona beginning in 2020.
Here are some photo highlights from the 2020 CMP Western Games. View hundreds more Western Games images on the CMP Zenfolio Photo Archive.
Vintage Sniper Match
Marksmanship 101 Training and M16 Match
Rimfire Sporter Match
Share the post "CMP Western Games a Success Despite Shortened Schedule"
Here’s a simple task you can do that will give your seater die a more perfect fit to your match bullets. You can lap the inside of the seater stem so that it matches the exact profile of the bullet. This spreads out the seating force over a larger area of the bullet jacket. That allows smoother, more consistent seating, without putting dents, creases, or sharp rings in your bullets.
This process is demonstrated here by our friend Erik Cortina of Team Lapua-Brux-Borden. Erik, one of the nation’s top F-Class shooters and a skilled machinist, explains: “Here I’m lapping my new seater die stem with lapping compound. I chuck up a bullet in the lathe and lap the inside of the seating stem. I put lapping compound on the bullet and also in the stem. You can do the same with a hand drill and bore paste. You can see in the piture below how much contact area the stem has on the bullet after being lapped. This bullet is a Berger 7mm 180-grain Hybrid. ”
It can be helpful but it’s not necessary to make your seating stem an exact match to a bullet, particularly if you’re loading hunting or varmint rounds. But it is helpful to do some mild internal stem polishing. This should eliminate any ring (or dent) that forms on the bullet jacket during seating.
Sharp edges on a seating stem can cause a ring to be pressed into the bullet jacket — especially with compressed loads that resist downward bullet movement.
Q2: Is there any down-side to the process?
Not really. However, if you shoot many different bullet types for a particular cartridge, you may not want to conform the stem aggressively to one particular bullet design. Lightly lap the inside of the stem to remove burrs/sharp edges but leave it at that. A light lap will prevent a ring forming when seating bullets.
We have all been there…..you place a piece of tumbled brass in the shell-holder of your press, raise it into the die, and suddenly it is like somebody hit the brakes. The case is stuck in the die. Your first instinct is to reverse it out. You crank on the handle, and BANG! The rim rips off the case head and you are looking at a piece of brass stuck in the die.
A stuck case is one of the boo-boos that all of us reloaders have faced from time to time. If proper lubrication is applied, then it should not be a problem. No matter if you are a seasoned reloader or new to it, this situation can happen. Take your time, use the proper procedures, and you will be back in business in no time! This article explains how to avoid stuck cases (through proper lubrication) and how to use a stuck case removal system.
What Causes Stuck Cases
One of the first common mistakes reloaders face is the stuck case. It can be caused by too much or too little lube. Too much and a vacuum can be formed causing the case to become suctioned into the die. Too little lube and friction is the culprit. So what is the cure? There is no exact cure, but the best lube that we have found so far is just a dab of Imperial Sizing Die Wax on your fingers and applied in a thin coat on the body of the case, not the shoulder or neck. Too much of this wax can cause the vacuum effect, or can eventually load your die up with gobs of residue. If it is applied to the shoulder area, or the leftover wax moves up into the shoulder region of the die, you will see dents or dimples in the shoulder. [AccurateShooter.com Editor’s Note: For normal full-length sizing of small cases such as 220 Russian/PPC, 6mmBR, 6.5 Grendel, or 6.5×47 Lapua we recommend Ballistol (aerosol) lube. It is very slippery, goes on very thin, and does not gum up the die.]
A great way to ensure that your dies are clean is to use a simple chamber mop with a dab of your favorite solvent on it and clean out the die. Be sure all of the solvent is out after cleaning by spraying the die out with Quickscrub III or use a clean chamber mop. If you are storing your dies, you can apply a thin coat of a good oil to protect the steel such as TM oil or Starrett M1 Spray.
Using a Stuck Case Removal Kit
If you do stick a case in your die there are a few good stuck case removal kits available. Each one works in a similar fashion. I have found the Hornady kit very effective and easy to use.
Basically what you do is remove the die from the press. Unscrew the decapping assembly and pull it out as far as you can. You then need to drill/tap threads into the stuck case head (this is why it is suggested to unscrew the decapping assembly as far as you can to get it clear of the drill bits). Once this is done screw the die back into the press. You then install the included shellholder attachment on the shellholder ram, and thread it into the case via a small wrench. With some elbow grease you can reverse the stuck case out of the die with the leverage of the press, and not damage the die.
However if the case is stuck….REALLY stuck, you may pull out the threads on the case and you are still left with a stuck case in the die without any way to pull it out. If the case is really difficult to remove even with the use of a stuck case removal kit, do not try to be Hercules with the press ram. Here is a trick that may work. Take the die with the stuck case and place it in your freezer for a couple of hours. Then repeat the removal with the cold die. The freezing temperatures may cause the brass to contract, and make removal easier. If this does not work it is recommended to send it to the die manufacturer. They will be able to remove the case without damaging the die.
Another fix if you can remove the decapping assembly completely is to use a tap hammer and a punch or small wooden dowel to knock the stuck case out. This isn’t the best way since it is very possible that you will damage the die internally or externally on the threads, or both. Send the die to the manufacturer to have this done properly. You will be happier in the long run.
This article appears courtesy Sinclair International. It first appeared in Sinclair’s Reloading Press Blog.
Share the post "Why Cases Can Stick in Dies — And How to Cure the Problem"
At the request of our readers, we provide select “Deals of the Week”. Every Sunday afternoon or Monday morning we offer our Best Bargain selections. Here are some of the best deals on firearms, hardware, reloading components, optics, and shooting accessories. Be aware that sale prices are subject to change, and once clearance inventory is sold, it’s gone for good. You snooze you lose.
1. Mc3 Stocks — 20% Off All Stocks and Accessories
Here’s a great oppotunity — get 20% Off all Mc3 products during the April Stay Healthy 2020 Sale. Do you have a rifle you’ve been wanting to upgrade? You can get 20% off EVERYTHING in the McMillan Mc3 store. Save on Hunting Stocks, Tactical Stocks, Bottom Metal, Magazines and other accessories IMPORTANT: To save 20% use Code STAYHEALTHY during checkout. Thanks to ELR Researcher for this tip.
2. Precision Reloading — HUGE Clearance Up to 50% Off
Precision Reloading is running a Big Clearance on a wide range of products including bullets, loaded ammo, reloading tools, dies, holsters, storage boxes, and more. You find some truly great deals, with many items up to 50% off. There are over 400 items on sale, including Berger, Barnes, and Nosler Bullet Sample Packs, cleaning kits, and more.
3. FREE FL Die Set with RCBS MatchMaster Dispenser
Have you been wanting to try the impressive new RCBS MatchMaster powder dispenser but you’ve been waiting for a special deal? RCBS is now offering a FREE Die Set Promo. Purchasers of a MatchMaster Scale/Dispenser qualify for a free set of MatchMaster Dies, with a $185.00 MSRP. This Promotion applies to MatchMaster machines purchased from any retailer including Amazon, Graf & Sons, and Midsouth Shooters. After completing your purchase, submit the RCBS Redemption Form to get your FREE set of MatchMaster FL dies. Die sets for 23 different cartridge types are available. MORE INFO HERE.
4. Midsouth — Aguila .22 LR Ammunition in-stock
Has the recent run on supplies got you thinking that you could use some more rimfire ammo? Well Midsouth Shooters has a full selection of reliable Aguila .22 LR ammunition at very affordable prices. A wide variety of Aguila .22 LR rimfire ammo is currently in-stock and ready to ship.
5. Bruno Shooters — McMillan Stock Sale
McMillan makes some of the best stocks available, with proven designs for just about any discipline or action type. If you’ve been in the market for a new stock, head over to Bruno Shooters Supply. Bruno’s has discounted a wide selection of McMillan stocks including popular tactical, hunting, and benchrest stock designs. Save money and avoid the manufacturer’s waiting period.
6. Sportsman’s Warehouse — Savage AXIS II w/scope, $399.99
If you’re in the market for a good basic rifle packaged with a 3-9x40mm scope, here’s a great deal. Sportsman’s Warehouse has the Savage Axis II with optic for just $399.99!. Currently this package deal is offered with 12 different chamberings including the popular .223 Rem, .243 Win, 6.5 Creedmoor, .308 Win, and .30-06 SPR. This is a great value for a basic hunting rig.
7. Natchez — Bushnell Gold Binoculars, $49.99
We love high-end binoculars, but it makes sense to have a lower-cost set of binoculars that you might keep as a spare, lend to a friend on request, or use on camping trips. Right now Natchez is selling Bushnell 8x42mm Custom Gold Binoculars for the crazy low price of only $49.99. Hard to beat that price (under fifty bucks) for a brand name optic.
8. Amazon — Tactical Survival Knife, $18.95
Good knives are vital tools, particularly during times of crisis. When we saw this cool tactical survival knife for only $18.95 we couldn’t resist sharing. With a G10 handle and full tang design this tactical chopper is equally at home around the shop as it is out in the field. The knife features a serious square-front 3.5″ blade, and ships with a rugged nylon carry sheath. Choose either Black or Silver, both with 3mm-thick stainless steel blades. A this price you could grab a pair — one in each color.
Are you sitting around in Coronavirus lockdown trying to figure out what to do? How about organizing your reloading area with these handy wall-mounted storage bins. At just $24.97 for 30 units — nearly 50% Off the regular price — this storage set is a great bargain. Use these for bullets, brass, ammo boxes, small tools — you name it. At this price you can get all those odds and ends put in their place and be ready for when the world gets back to normal.
Share the post "Bargain Finder 238: AccurateShooter’s Deals of the Week"
NOTE: Barnes has just opened a new e-Commerce site where you can buy Barnes bullets direct from the manufacturer. To mark that development, we’re republishing an interesting article on how Barnes develops BC values and ballistic data for its match bullets and ammunition. Barnes employs advanced Doppler Radar to record bullet speeds at multiple distances out to 1500 yards.
Determining Bullet Ballistics with Doppler Radar Data
How do you build better (more precise) ammo drop tables? With radar, that’s how. Barnes Bullets is using Doppler Radar to develop the drop tables for its Precision Match line of factory ammunition. The Doppler radar allows Barnes to determine actual velocities at hundreds of points along a bullet’s flight path. This provides a more complete view of the ballistics “behavior” of the bullet, particularly at long range. Using Doppler radar, Barnes has learned that neither the G1 nor G7 BC models are perfect. Barnes essentially builds a custom drag curve for each bullet using Doppler radar findings.
Use of Doppler Radar to Generate Trajectory Solutions
by Barnes Bullets, LLC
Typical trajectory tables are generated by measuring only two values: muzzle velocity, and either time-of-flight to a downrange target, or a second downrange velocity. Depending on the test facility where this data is gathered, that downrange target or chronograph may only be 100 to 300 yards from the muzzle. These values are used to calculate the Ballistic Coefficient (BC value) of the bullet, and the BC value is then referenced to a standardized drag curve such as G1 or G7 to generate the trajectory table.
This approach works reasonably well for the distances encountered in most hunting and target shooting conditions, but breaks down rapidly for long range work. It’s really an archaic approach based on artillery firings conducted in the late 1800s and computational techniques developed before the advent of modern computers.
There is a better approach which has been utilized by modern militaries around the world for many years to generate very precise firing solutions. Due to the sizeable investment required, it has been slow to make its way into the commercial market. This modern approach is to use a Doppler radar system to gather thousands of data points as a bullet flies downrange. This radar data is used to generate a bullet specific drag curve, and then fed into a modern 6 Degree of Freedom (DOF) [ballistics software program] to generate precise firing solutions and greatly increase first-round hit probability. (The 6 DOF software accounts for x, y, and z position along with the bullet’s pitch, yaw, and roll rates.)
Bullet-Specific Drag Curves Derived from Radar Data
Barnes’ advanced Doppler radar system can track bullets out to 1500 meters, recording the velocity and time of flight of that bullet every few feet along the flight path. The noteworthy graph below shows a Doppler Radar-derived, bullet-specific drag curve alongside the more common G1 and G7 curves:
Neither of the standard curves is a particularly good match to our test bullet. In the legacy approach to generating a downrange trajectory table, the BC value is in effect a multiplier or a fudge factor that’s used to shift the drag curve of the test bullet to try and approximate one of the standard curves. This leads to heated arguments as to which of the standardized drag curves is a better fit, or if multiple BC values should be used to better approximate the standard curve (e.g., use one BC value when the velocity is between Mach 1 and Mach 2, and a different BC value when the velocity is between Mach 2 and Mach 3.) Barnes’ approach to creating trajectory tables is to generate bullet-specific drag curves, and use that data directly in a modern, state-of-the-art, 6 DOF ballistics program called Prodas to generate the firing solution.
Story tip from EdLongrange. We welcome reader submissions.
Share the post "Barnes Bullet Ballistics Determined with Doppler Radar Testing"
Cutting out the middleman — that’s what Barne is doing by launching its own e-Commerce website. Yes, now you can purchase the full line of Barnes bullets directly from the manufacturer. However, Barnes ammunition will only be sold through commercial retailers — no online ammo sales.
The new e-commerce web store, Shop.barnesbullets.com, allows individual consumers the convenience of purchasing Barnes Bullets directly. This can help you find the most popular bullets that are sometimes in short supply on dealers’ shelves.
Direct Shipping for Most States
All items on the site can be shipped direct to a consumer’s residential address except certain jurisdictions (such as California), which are noted on the site. All purchasers must be of 21 years of age or older, and adult signature with photo ID will be required to verify this upon delivery. And right now Barnes is offering FREE Shipping on all orders over $99.00.
Set Up Your Own Account or Shop as Guest
Personal accounts can be created to store shipping addresses for speed of checkout, see order status, and order history. A guest checkout option is also available. After an order is submitted auto-generated emails will be sent for: order confirmation, invoice of purchase, processing status, and shipped status.
CLICK HERE to view a catalog of All Barnes products.
If you have questions about the new Barnes online store, contact Barnes Customer Service: customerservice@barnesbullets.com. Or Telephone: (435) 856-1000.
Share the post "Barnes Opens Online Store for Bullet Sales"
Specialty Pistols — Report from Ernie Bishop in Wyoming
For those who know of me in the shooting world, you would probably know me in one of two ways: Dealer for SEB Rests or someone who does most of his competing, varminting, and or hunting with specialty pistols. These are typically bolt-action, single-shot rigs that can be used with a bipod. They can seem very similar to a pistol-grip rifle, but without a conventional buttstock.
My interest in all things specialty pistols (Remington XP-100, TC Contender, MOA Maximum, Pachmayr Dominator, H-S Precision HSP, etc.) goes back to the early 1980s. Most of the specialty pistols listed are no longer made, so when I discovered that Kauger Arms was making two, I was excited. I have not had much time to shoot my new Kauger “Black Widow” chambered in 6.5×47 Lapua. But so far, the experience has been fun, even though I have not taken it prairie dog shooting yet or hunted big game with it. For this report, I went to my friend Dan’s place as one can load in the house, and simply shoot off his back porch.
When thinking of a precision shooting platform, most of you would not consider a wood back porch as ideal. But we managed a 0.179″ 3-shot group at 100 yards using a Harris bipod and a small leather bag. Yes the Black Widow can shoot! My load was Lapua brass, Federal 205M primers, Varget powder, and the Hornady 123gr A-Max, with a MV of 2514 fps. I selected the Hornady 123s with prairie dogs in mind. As shown in the top photo, the scope on the Black Widow is a Sightron S-III 6-24 with a Holland’s scope level. The Black Widow also sports a Holland’s Radial Baffle brake.
Here is the Black Widow with a different scope base and scope, ready to go on Dan’s porch.
The day we planned to shoot prairie dogs was windy, so we headed to public land nearby and set up steel to get ballistics drop info and simply to play at distance. We had 5″ steel at 220 yards, 10″ steel (diamond) at 510 yards, and 10″ steel (square) at 650 yards. Wind was from 8 mph to just over 20 mph, so the little 123 grainer was getting tossed about, while keeping us humble all at the same time. Regardless of the gusty winds, I considered the session a success!
Kauger Arms has been making parts for a number of companies in the firearm industry for over 20 years. In 2014 when things slowed down for them, they decided to start building rifles and decided to make their own actions. Good decision — these actions, which are machined in a single process to keep everything true to the bore, are great. Bolt manipulation with Kauger’s action is the smoothest I have ever experienced.
Tim Kauger explained features of his actions to me. The Kauger cock-on-opening action has a Rem 700 footprint for action holes and trigger shoe. The semi-coned bolt features a floating bolt head which is slightly smaller than the bolt body. The firing pin assembly is 1/4-turn removable. There are user-changeable bolt body and knob options. There is a side bolt release above the stock line. All moving surfaces are nitrided. This can be ordered single shot, feed rails or DBM cut. Also the long action will accept up to a .338 Lapua/.300 Norma Mag if ordered that way (with 1.25″ barrel cylinder).
Kauger Arms offers a right-hand or left-hand grip, which is very comfortable. I shot the Black Widow both right-handed and left-handed with no problems whatsoever. Kauger Arms can build the Black Widow in many more chamberings than the two that are listed on the KaugerArms.com website.
New left-bolt/left port action from Kauger Arms — To the specialty pistol shooters reading and to those considering entering the SP world, Kauger Arms has listened to your requests and is working on a left bolt/left port short action that will be offered either as a single-shot action or with bottom metal. You grip the pistol with your right hand, then run the bolt with your left-hand.
Specialty Pistol 2 — The Camo .223 Remington HSP
Here is another one of Ernie Bishop’s specialty pistols. This eye-catching camo-stocked rig was crafted by H-S Precision. Sadly, H-S Precision is not making these HSP pistols anymore. This .223 Remington features a 1:7″-twist, 15-inch-long H-S barrel fitted with the “H” Brake. On top is a Burris XTR-III 5.5-30x56mm scope with SCR 2 MIL reticle and Burris rings.
Great Results with Varget + 77gr Sierra TMKs
Ernie tells us: “For a load, I have been running Lapua brass, Rem 7.5 primers, Varget, and the 77 grain Sierra TMK. Muzzle Velocity is 2675 FPS. As you can see, it shoots pretty well. Shown at right is a measured 0.265″ 3-shot group at 100 yards, shot from Harris bipod and small field bag.
Previous to this, I was shooting Federal Match ammo with the 77 grain SMK (MV was 2500 fps), with prairie dog kills past 600 yards, and have played on steel out to 1000 yards. This H-S specialty pistol is great for young or old alike, for novice shooters or experienced shooters. Everyone needs a fast twist .223 Remington!”
Here is my friend Dan shooting the .223 Rem HSP with factory ammo during a prairie dog trip.
Share the post "Sunday GunDay: Ernie Bishop’s Bolt-Action Specialty Pistols"
With all the grim Pandemic news these days, here’s something to take your mind off the Coronavirus. We offer some some mighty impressive trick shooting by a very talented young lady. In this video, Kirsten performs a classic Annie Oakley trick shot, cutting a playing card in half with a bullet. We hope this display of marksmanship brings a smile to our readers on this Easter Sunday 2020.
Kirsten Joy Weiss is a phenomenal off-hand rifle shooter. Splitting a playing card would be hard enough with a scoped rifle shot from the bench. But Kirsten makes this amazing shot from standing position, shooting over iron sights, with an inexpensive rimfire lever gun. Trust us, that’s not easy. It did take Kirsten three tries, but we’re still impressed.
To accomplish this trick shot, Kirsten’s horizontal aim had to be ultra-precise. A playing card is only 0.25mm thick (about 1/100th of an inch). That leaves almost no room for error.
GIF Animation Shows Bullet Slicing Card in Half:
We know top benchresters can put five shots in one ragged hole at 100 yards, used a scoped rifle sitting on a stable rest. But make those folks stand on their hind legs, hold the rifle, and aim over primitive iron sights, and some of those benchrest aces would be lucky to hit a dinner plate at 100 yards. Kudos to Kirsten for making this great shot.
Share the post "Amazing Accuracy — Kirsten Cuts Cards with Rimfire Rifle"
In response to the growing number of first-time gun buyers during the Coronavirus outbreak, the NRA’s Education & Training Division is offering four new Online Gun Safety Courses that can be done online at home. The Four New NRA Online Gun Safety Courses ARE:
1. Gun Safety Seminar
2. NRA Basic Pistol Shooting Course — Distance Learning
3. NRA Basic Rifle Shooting Course — Distance Learning
4. NRA Basic Personal Protection In The Home Course — Distance Learning
Each course, lasting from one to eight hours, is available online at NRAInstructors.org. To Access the 0nline training options, first CLICK HERE. Then under the Heading “DISTANCE LEARNING”, you will see options. CLICK the small gray box at the left of the title to select the course. IMPORTANT — Next you MUST SCROLL to the bottom of the NRA webpage to SEARCH. Select your state or Zip code, then you will get a list of the moderated online courses in your area.
Here is the Procedure to Follow:
1. CLICK HERE to Access ALL Course Listings
2. Select a “Distance Learning” Course.
3. Scroll Down and SEARCH for your State or Zip Code.
4. Review Course Dates and Times.
For example, here are the listed NRA online safety courses for California only. Elsewhere (in other states), YOUR list will be different!
“These courses will provide an option for first-time gun owners who don’t have the ability to take an NRA certified instructor-led class at their local shooting range at this time,” said Joe DeBergalis, Exec. Dir. of NRA General Operations. “While there is no replacement for in-person, instructor-led training, our new online classes do provide the basics of firearm safety training for those self-isolating at home.”
Though range time is an important part of the classes, there is still a wealth of knowledge available in the online programs. “The NRA recommends that all new gun owners seek professional training at the range, but that doesn’t mean you can’t get a head start on learning the basics of firearm safety at home. Taking one of these classes moderated by a certified NRA instructor, can only make you safer…” DeBergalis added.
Share the post "NRA Offers Online Training Courses for New Gun Owners"
Given the Coronovirus Pandemic, many Americans are looking to acquire handguns for personal protection, both in the home and while away from the house. Thus, many folks are looking for slim, relatively lightweight pistols that can be carried comfortably and discretely. There are dozens of carry guns on the market currently. But our friends at GunsAmerica.com have recently reviewed three of the best “micro-compact” 9mm pistols: SIG Sauer P365, Smith & Wesson Shield, and the Glock 43.
Note: There seem to be some connection issues with GunsAmerica on 4/11/20.
After looking at a variety of factors, including accuracy, reliability, ergonomics, build quality, size/weight, and price, GunsAmerica’s tester Jeff Cramblit concluded that the SIG P365 was the best of the three: “Bottom Line — The SIG P365 wins this shootout in my humble opinion. The MSRP of $599 is a bit higher than the other guns but SIG brings a bit more to the game. The outstanding grip design, higher capacity, great sights, lighter trigger pull, smaller length, light weight and just a great overall feel make it a winning product. The other two guns are great, they have been the cornerstones of concealed carry for many years, and I have personally carried both of them, but SIG has changed the game.”
Choosing a Carry Pistol — Performance, Reliability, Value
This Editor owns two SIG Sauer pistols, a P226 and P232. Both are “old school” metal-framed handguns. I can attest to their quality and reliability over many years. So I’m not surprised to see that SIG’s new P365 took top honors in this recent test. But I also think the Smith & Wesson Shield also offers excellent value for the dollar. The S&W 9mm Shield is ON SALE now for $289.99 at Palmetto State Armory.
This YouTube Video Compares the SIG P365 and the S&W Shield
Accuracy with Various Ammo
In the GunsAmerica Test, the SIG P365 had the best accuracy, based on five (5) different types of 9x19mm ammo shot off-hand at 25 yards. The SIG’s average 5-shot, 25-yard group size was 1.45″, vs. 1.7″ for the Glock 43, and 2.1″ for the S&W Shield. The P365’s accuracy edge may be due in part to its lighter, 5.1-lb trigger pull compared to 6 lbs. for the S&W Shield, and 6.25 lbs. for the Glock 43.
Dimensions — Width and Weights
Size matters — particularly when it comes to a carry pistol. The S&W Shield is the narrowest of the three guns at 1.03″ wide vs. 1.11″ for the P365 and 1.36″ for the Glock 43. Though it has the highest round capacity, the SIG P365 actually has the smallest grip circumference and grip depth. Weight-wise, the Glock 43, at 18 oz. unloaded, is the lightest. The SIG P365 is 18.8 oz., while S&W Shield is the heaviest at 20.5 oz. weight.
Capacity — SIG P365 Has the Edge
The SIG P365, holding 10+1 rounds, has the highest ammo capacity. This is remarkable as the P365 has the smallest grip circumference of the three pistols. Kudos to SIG for clever design. The S&W Shield has an 8+1 capacity, while the Glock 43 only holds 6+1. Advantage SIG.
Share the post "Carry Pistol Comparison: SIG P365, S&W Shield, Glock 43"
A stuck case is one of the boo-boos that all of us reloaders have faced from time to time. If proper lubrication is applied, then it should not be a problem. No matter if you are a seasoned reloader or new to it, this situation can happen. Take your time, use the proper procedures, and you will be back in business in no time! This article explains how to avoid stuck cases (through proper lubrication) and how to use a stuck case removal system.
This approach works reasonably well for the distances encountered in most hunting and target shooting conditions, but breaks down rapidly for long range work. It’s really an archaic approach based on artillery firings conducted in the late 1800s and computational techniques developed before the advent of modern computers.
The day we planned to shoot prairie dogs was windy, so we headed to public land nearby and set up steel to get ballistics drop info and simply to play at distance. We had 5″ steel at 220 yards, 10″ steel (diamond) at 510 yards, and 10″ steel (square) at 650 yards. Wind was from 8 mph to just over 20 mph, so the little 123 grainer was getting tossed about, while keeping us humble all at the same time. Regardless of the gusty winds, I considered the session a success!
Great Results with Varget + 77gr Sierra TMKs
Dimensions — Width and Weights
