RCBS Summit Reloading Press — Unique Design That Works

Gear Review by Mark LaFevers
With its innovative “moving die/static cartridge” design, the RCBS Summit Press definitely demonstrates “out of the box” thinking. Unlike other presses, the case does not move. Rather, the reloading die comes down to the case. We are happy to report that this unique “upside-down” reloading press works great.

We have tested the RCBS Summit Press in the workshop and in the field. We’ve now loaded hundreds of rounds with the press. It is smooth, solid, and easy to use. The spent primer ejection/capture system works great (our testers preferred the Summit’s simple, foolproof primer capture to the Rockchucker’s capture system). Most importantly, the Summit produces very straight ammo that gave excellent results on the target in actual matches.

We compared ammo loaded with the Summit with ammo loaded on an RCBS Rockchucker press. The Summit gave up nothing to the bigger press. Cartridge base-to-ogive measurements of Summit-loaded ammo were just as tight as with ammo loaded on the Rockchucker. Run-out, measured with a concentricity gauge, was the same or better (about .002 or less on bullet nose). Most importantly, the Summit loads accurate ammo. In fact, at one match, scores shot with Summit-loaded .284 Win ammo were actually better than scores shot (in the same gun) with ammo loaded on a Rockchucker:

Rockchucker .284 Win Loads (Day 1): 188-2X
Summit .284 Win Loads (Day 2): 192-5X

Despite its small footprint, the Summit is very stable — it doesn’t tip, wobble, or rock. The two front mounting bolts hold it firmly in place — the Summit doesn’t need a rear anchor. This, combined with the fact that the Summit has no overhang, makes this press ideal for a mobile application. For field use (at the range), our tester Mark LaFevers mounted the Summit press on a small platform secured to his trailer hitch (on top of a steel post). This set-up worked great, as you can see in the video below:

Watch Reloading (Sizing/Decapping, Expanding, Bullet Seating) with Summit Press

Photo shows Redding Micrometer Seating Die and .284 Win Cartridge

Mark tells us: “I think the Summit press worked out sweet mounted on the hitch pedestal. The receiver hitch pedestal I made will switch tools between a heavy barrel vise I made and the Summit press. Instead of securing the pedestal with a standard 5/8″ hitch pin, I drilled and tapped for 1/2″-13 bolt to draw the insert up tight against the receiver, eliminating wobble. For charging rounds, I bought 150 plastic test tubes with caps and racks so I can avoid weighing powder charges in the field, unless I want to make changes on the fly.”

The RCBS Summit Press features a rugged cast-iron frame with all-steel linkages. The press is very strong with minimal flex and slop. This allows you to “bump” your case shoulders and seat bullets with great precision and repeatability. The handle can be switched from right to left side (good for southpaws), and the open-front design provides good access, facilitating quick die changes*. The 4.5-inch opening allows you to work with tall cases. Beneath the shell-holder is a spent primer catcher (not shown in photos). The Summit press has a beefy 2-inch diameter ram, with compound linkages for plenty of leverage. A Zerk fitting is included for easy lubrication. The press will accept larger bushings for oversize 1-inch dies.

Summit Press Retails for $238.99
The RCBS Summit Press (RCBS item #09290) lists for $269.95. However, Midsouth currently has the Summit Press on SALE for $238.99. Yes it is IN STOCK and available. An optional short handle from RCBS costs $17.99 at MidwayUSA. ($19.95 MSRP).

This useful video explains the special features of the Summit press — ambidextrous handle, primer catcher, Zerk lube fitting — and shows the press operation.