May 27th, 2023

Saturday at the Movies: Turret Reloading Presses in Review

turret press reloading progressive Area 419 Zero Lyman RCBS Lee Redding Creedmoor sports

Every handloader can benefit from a turret press. This type of press features an upper rotating disk that has multiple threaded placements for dies or other tools (such as powder dispensers). There are a variety of turret presses on the market today with the remarkable Area 419 9-Station Zero Press at the top end, and the inexpensive Lee turret presses at the other end of the spectrum. In between are Lyman’s 8-station All-American turret, the Redding 7-station T-7 press, and the RCBS 6-station turret.

Today’s Saturday video showcase features notable turret presses from all the major makers. We lead off with a feature on the advanced Area 419 ZERO 9-station turret.

Area 419 ZERO 9-Station Turret Reloading Press — Without Peer

Area 419 offers the impressive ZERO reloading press, a 9-station turret press with some very unique features. This press was designed to be the most precise turret ever created. As tested by Gavin Gear of UltimateReloader.com, the ZERO turret press delivered very impressive shoulder-bump consistency and ultra-low seated bullet run-out (about +/- 0.0005″). The numbers were as good as you can get from a quality single-stage press, so Area 419 did some impressive engineering. We would expect that, as this represents a big investment — MSRP is $1275.00. SEE FULL REVIEW on UltimateReloader.com.

area 419 turret reloading press

The ZERO turret press lets you install up to nine (9) different reloading dies in the large top turret, which revolves around a central axis. But unlike most turret presses, the ZERO doesn’t have flex or wobble when you’re loading. This is because Area 419 includes a clever system for locking the turret in position after you’ve selected the die from your array. Area 419 also uses a unique system for securing shell-holders (see video at 12:00). This, likewise, adds to the precision of the press.

Quick Comparison Videos — Lyman, Lee, Redding

Below we’ve included a couple quick video “shorts” which show the Lyman Turret Press and the Lee Classic 4-Hole Turret in action. After those two vertical-format videos, there is an interesting comparison between the Redding T-7 and Lyman 8-station turret press:

This video has a side-by-side comparison of the Redding T-7 and the Lyman 8-station turret press:

Lyman Brass Smith All-American 8-Station Turret Press

Lyman Brass Smith Turret Press All American 8 eight turrets reloading

The Lyman Brass Smith All-American 8-station press is an impressive product introduced five years ago. In 2018, Lyman introduced a new 8-station turret press, the All American 8. The All-American 8 has become popular with handloaders. With a $253.49 street price, the 8-station Lyman is $122 cheaper than the $375.95 7-station Redding T-7. No question, that’s a significant price advantage, and we believe Lyman has grabbed sales from Redding.

Our friend Gavin Gear of UltimateReloader.com created an informative video showing press set-up and loading function. Gavin was excited to work with this beefy new turret press: “Why was this Lyman press anticipated so highly? A few reasons are: the 8-station capacity, cast iron construction, on-press priming system, ambidextrous design, and turret rear support for repeatable sizing and bullet seating.”

More Stations Provide More Reloading Options
Gavin liked having 8 stations, because this offers more flexibility. With eight stations, you can have four two-die sets, or three two-die sets plus a dedicated decapping die and a powder measure. Gavin notes: “I’ve owned many reloading presses, including 3-station, 4-station, 5-station, and 7-station variants, but I’ve never owned an 8-station press until the Brass Smith All-American 8 came to the shop. I’ll have to say… you can’t get too many stations, especially on a manually-indexed turret. I love the idea that you can leave dies on the press, and load multiple calibers/chamberings using the same turret setup.”

Redding T-7 with Creedmoor Sports Enhanced Turret Head

The Redding T-7 has long been a leading turret press for precision handloaders. It offers one more station than the other “green” turret press offered by RCBS. It has a reliable optional priming system and plenty of leverage. Recently Creedmoor Sports has released an upgraded Enhanced Press Head for the Redding T-7. This $179.95 turret top allows greater precision in case sizing and bullet seating. This UltimateReloader video covers the advantages of the new precision turret head. READ Full Report on UltimateReloader.com.

Creedmoor Sports also offers enhanced precision press heads for the RCBS Turret Press, and Lyman 8 Turret Press. Both priced at $179.95, these two enhanced heads are featured in the video below:

Redding T-7 That Has Loaded over 1 Million Rounds

Here’s something you don’t see every day — a reloading press that has loaded over 1,000,000 rounds of ammo. At the NRA Convention in Dallas in 2018, Redding showcased an old Redding T-7 Turret Press delivered to Sierra Bullets decades ago. 0ne of the very first T-7s made by Redding, this “old warrior” was used by Sierra Bullets to load over 1,000,000 rounds of ammunition in Sierra’s ballistics lab. After all that loading, Redding tested the press and, remarkably, found that it still remained “within spec”. Redding notes: “This press was subjected to real world reloading wear and stress yet remains within ‘new’ spec after this historic test”.

Redding t-7 turret press

RCBS Six-Station Turret Press

This Editor has used an RCBS Turret Press for over 15 years. It does not have the most stations or the most sophisticated features, but it has proven very reliable over the years. I use it primarily to use with pistol sizing and seating dies. Having six stations allows me to load multiple cartridge types: 9x19mm, .357 Magnum, and .45 ACP. READ FULL REVIEW on UltimateReloader.com.

Similar Posts:

Tags: , , , , ,