Here is Ernie Bishop’s pride and joy, a specialty pistol nicknamed “Batman” because the black carbon-fiber stock looks like the Batmobile. This is one sophisticated handgun. Complete with scope, the Batman pistol weighs under 7.5 pounds, thanks to the ultra-light stock. The carbon stock is 6 inches wide at the fore-end, yet weighs just one pound. Ernie tells us: “This gun shoots amazing and is easy to shoot especially with my SEB MAX Rest.” After these photos were taken, Ernie added a “field-usable rear-grip stock so [he could] shoot it prone from a bipod as well.”
The Batman pistol is chambered for the 6mm “Long Dasher”, a 6mm 40°-shouldered variant of the 6.5×47 Lapua. Ernie loads Berger 105gr Hybrid bullets pushed by Hodgdon H4350 powder.
Gun Specifications The gun, crafted by Eric Wallance of Nawaka Firearms, features an XP-100 action, Jewell trigger, and 15″-long, Brux 1:8″-twist barrel with aluminum muzzle brake. Interestingly, this gun does not have a traditional recoil lug. Instead, gunsmith Wallace milled out a lug from the bottom of the XP-100 action to save weight. On top of the action, the rig carries a Sightron Inc S-III 6-24X56mm scope in Kelbly rings on a custom +20 MOA rail.
Long Dasher Wildcat
Shown at right is a “Long Dasher” 40° wildcat created by Forum member Sunbuilder. This is very similar to Ernie Bishop’s chambering, though there may be small variations related to reamer design (such as freebore). Sunbuilder’s 6-6.5×47 Improved (aka “Long Dasher”) reamer was made by Dave Kiff of Pacific, Tool & Gauge. This wildcat cartridge adds about 2.0 grains capacity to the 6.5×47 necked down to 6mm. The case certainly is impressive with that 40° shoulder. We’re just waiting for the tactical guys to starting run this improved cartridge with its original 6.5mm bore.
Here are three FIVE-shot groups at 500 yards, shot by Ernie’s Batman pistol:
With the high cost of factory ammo, more shooters are loading their own ammo. When good 9mm pistol ammo was $10/box, it might be hard to justify handloading. Now that 25 rounds of factory 9mm JHP ammo can run $25 or more it certainly makes sense to reload. The same is true with rifle ammo if you shoot large quantities, or if you simply can’t find your preferred ammo for sale these days.
To increase productivity when reloading large quantities of ammunition, many shooters are thinking of getting a progressive press. Because multiple operations take place with a single pull of a lever, a progressive press can produce way more ammo in a given period of time than any single stage press. With a progressive, on the ram up-stroke, the multiple stations can simultaneously remove spent primer, full-length size case, drop powder, seat bullet, and crimp (if desired). Most progressives are also set up to prime cases with the ram in the lower position — though some guys prefer to prime manually.
Progressive presses aren’t just for high-output pistol ammo or bulk rifle ammunition. Good progressives can be adapted to do certain reloading tasks for top-of-the-line match ammo. You might use a progressive for decapping, priming, and sizing, then throw powder and/or seat bullets separately. Some Champion shooters do use progressives to load their match ammo! For example 5-Time National Long Range Champion John Whidden and 2020 Berger SWN F-Open Champion Jay Christopherson both use progessive presses for some (but not all) operations.
To help you get started with progressive presses, here are six videos from UltimateReloader.com that cover seven popular machines, from the elite Mark 7 Evolution to the affordable Lee Loadmaster. With many of these machines you can add separate vertical bullet feeder systems that further increase loading efficiency. Machines Covered: Lyman Mark 7, Dillon XL-650, Dillon XL-750, Dillon RL-550c, RCBS Pro Chucker 7, Hornady Lock-N-Load AP, and Lee Load Master.
Mark 7 Evolution Press — Distributed by Lyman
Dillon XL-650 vs. Dillon XL-750 (Two Press Review)
RCBS Pro Chucker 7 with Bullet Feeder
Dillon 550C with 6mm Creedmoor and 9x19mm
Hornady Lock-N-Load AP Progressive
Lee Load-Master Features and Loading 9mm
SAFETY BONUS — Why You Need a Lock-Out Die
The RCBS Lock-Out Die can also be used with some Dillon and Hornady progressive presses.
If you load pistol or rifle ammo with a progressive press, we strongly recommend you get a Lock-Out Die from RCBS. This unique reloading die will prevent your progressive press from advancing if the dispensed powder charge is more or less than about 0.3 grains too high or too low. The Lock-Out Die really works.
The Lock-Out Die works by using a central die detection rod that sets its vertical position based on the height of the powder column in the case. Through an ingenious design, if the powder column height is too low or too high, the rod locks in place as you start to pull the press handle. This halts the press before the ram can lift and the cartridge plate can advance. Unlike a beeping alarm system (which can be ignored or defeated), the Lock-Out Die physically stops the movement of the press ram and prevents a bullet being seated in the “problem” case.
It takes a bit of tweaking to get the Lock-Out Die detection rod setting just right, but once it is correctly positioned, the Lock-Out Die works smoothly in the background. The Lock-Out Die won’t interfere with the loading process unless it detects a high or low charge — and then it positively stops the progressive loading cycle.
While crafted for use in RCBS progressive presses, the RCBS Lock-Out Die can also be used on a Dillon XL Progressive or Hornady Lock-N-Load progressive — though it does take up one station which could otherwise be used for a final crimp die (after the seating die). This Editor has used the RCBS Lock-out die very successfully on an RCBS 2000 progressive press for many years.
Story by Boyd Allen
While many top competitive shooters trickle their stick powder charges to a kernel or two, that would be impractical when loading charges for giant naval guns. You may be surprised, but the shells fired by the U.S. Navy’s massive 14″ and 16″ naval guns were also propelled by stick-type extruded powders. You couldn’t trickle these ‘kernels’ though — a single stick or ‘grain’ can be over 2″ long.
The U.S.S. Iowa fires her massive 16″ main battery. The U.S. Navy’s Iowa-class battleships carried nine huge 16-inch Mark 7 cannons in three turrets. The big naval guns were 50 calibers long, i.e. 50 times bore diameter, making the barrels 66.7 feet long from chamber to muzzle.
In connection with a Benchrest Central discussion that drifted to the subject of powders used in large naval guns, I heard from Joe McNeil, whose father was involved in manufacturing those very propellants as a DuPont employee. Joe writes:
“My Dad worked for the DuPont company for over 40 years. Every time the nation went to war he was assigned to the gun powder plants which DuPont ran for the government for $1.00 per year! His last assignment was at the Indiana Ordnance Plant in Jefferson, Indiana from 1952 through 1958. He had a display case made of all of the different powders made at the plant and left it to me. That’s why I have a grain of 16″ gun powder. He took me out to the Jefferson proving grounds once when they tested the powder in a 16″ gun. We watched from a half-mile away but it left a lasting impression when they fired that gun. They actually had a set of rings they fired through to test the performance of the powder and shell. This was a truly fond memory of my Dad and his work.”
Here are some pictures of the gun powder “grains” made during the Korean War at the Indiana Ordnance Works where Joe McNeil’s father worked.
Above is the display case with the different powders manufactured at the DuPont plant. They include: 37 MM/AA, 75MM Pack Howitzer, 50 Cal. 5010, 20 MM 4831, 30 Cal. 4895, 76 MM, 3″, 5″, 90 MM, 4.7″, 240MM, 8″, 280 MM, 175 MM, 155 MM Howitzer, 155 MM Gun M.P., 8″ Gun M.P., 12″, 14, 16″. There are different-sized ‘grains’ for specific rounds.
16-inch/50-caliber gun projectile plus six propellant bags. Display mockup aboard U.S.S. Iowa (BB-61) in San Pedro, CA. Photo by James Madison per Creative Commons CC-BY-SA-4.0 license.
Precision Rifle Series (PRS) Rimfire Finale on Shooting USA
This week Shooting USA showcases the PRS Rimfire Finale. This rimfire discipline is like Precision Rifle Series (PRS) centerfire competition, but shot with .22 LR rimfire rifles. Shooters can compete without the high cost of centerfire ammo and without the need for a 1000-yard range. The 2023 PRS Rimfire Finale, sponsored by Ruger, was held in Pennsylvania in October 2023. The big event drew over 200 competitors. SEE: PRS Rimfire Series Info.
Shooting USA SHOW TIMES: This Shooting USA Episode airs Wednesday, February 14, 2024 at 9:00 PM Eastern and Pacific; 8:00 PM Central. If you miss the regular broadcast, you can stream the show online at any time on Vimeo for $0.99 per episode.
PRS Rimfire Finale — Over 200 Competitors
The 2023 PRS Rimfire Series Finale drew over 200 competitors. The Finale Match was hosted last October by MKM Precision in Kennerdell, Pennsylvania. PRS and NRL tactical matches are among the fastest-growing competitive shooting disciplines. And rimfire tactical disciplines are actually growing even faster (than centerfire PRS/NRL) because .22 LR ammo is much cheaper than centerfire ammo, and there are many more ranges where rimfire matches can be held. PRS Rimfire offers the same kind of fun without the high cost of centerfire ammo and the time-consuming burden of hand-loading. Rimfire PRS also offers generally less expensive rifles, and a whole lot less recoil.
At the PRS Rimfire Finale in Pennsylvania match directors set out many unique courses of fire, and the target placements were certainly challenging. Many of the stages had cross-course target lay-outs. This makes wind-reading much more challenging, especially with the relatively slow, low-BC .22 LR cartridges used in PRS rimfire competition.
Tune in to Shooting USA TV on Wednesday, 2/14/24 to see the PRS Rimfire Finale. You’ll enjoy the coverage of this popular PRS rimfire sport, which we expect to grow significantly in 2024 and beyond. Notably, the National Rifle League (NRL) now conducts many more NRL22 matches than NRL centerfire matches. And competitors of course are drawn by the fun/challenge of a tactical match with much lower ammo costs — $0.10-$0.25/rd vs. $1.20/rd or more (counting brass, primer, bullets, powder, and barrel wear). And there are many more viable venues, because you don’t need a very big range to run a rimfire tactical match.
Getting Starting in PRS/NRL Rimfire Competition — The Rifle
Interested in getting started in PRS Rimfire competition? This MDT video explains the components you’ll need for a top-level .22 LR PRS rig.
Hornady is now the official Title Sponsor of the Precision Rifle Series. This is a major step up in sponsorship levels for Hornady. Previously Hornady sponsored special events such as the Precision Rifle Challenge. Now Hornady will be the lead sponsor of all PRS centerfire events. Hornady Marketing Director Neil Davies stated: “We are excited for the opportunity to be the Title Sponsor of the Precision Rifle Series. Being the Official Bullet and Official Ammunition of the PRS and becoming the Title Sponsor solidifies our commitment to the sport and the PRS as an organization.”
Ken Wheeler, PRS Director, stated: “We are beyond thrilled to officially announce our 2024 partnership with Hornady as our Title Sponsor and the Official Bullet and Ammunition of the Precision Rifle Series. Hornady is an industry leader and very involved in the PRS community, their … award-winning match bullets and ammunition make them exceptional partners of the largest precision rifle organization[.]”
Hornady A-Tip Match Is Official Bullet of PRS
In connection with Hornady’s sponsorship, the Hornady A-Tip® Match has been named the official bullet of the PRS centerfire series. And Hornady MATCH ammo has been listed as the official PRS factory ammunition. NOTE: This does not make the use of A-Tips or Hornady Ammo mandatory in any respect, but these products will be promoted in connection with Hornady’s PRS sponsorship efforts.
We have shot Hornady A-Tip bullets in various platforms and have been impressed. The BCs are very good and A-Tips are capable of excellent accuracy if you inspect the tips for imperfections and sort the bullets by weight and base-to-ogive measurement. These A-Tips represent a significant design effort by Hornady: “Years of research and testing by the Hornady Ballistic Development Group, combined with advanced manufacturing processes and quality control measures, have led to the creation of the ultimate low-drag, high-performance A-Tip® Match bullet.”
In recent seasons, Hornady has sponsored PRS events such as the Precision Rifle Challenge.
Founded in 1949, Hornady Manufacturing Co. is a family-owned business based in Grand Island, Nebraska. Proudly selling Made-in-USA products, Hornady Manufacturing is a world leader in bullet, ammunition, reloading tool, accessory, and security product design and manufacturing.
Happy Valentine’s Day
Today is February 14th, Valentine’s Day. To celebrate this romantic holiday, talented shooter Kirsten Joy Weiss has devised a cool trick shot with her .22 LR Volquartsen semi-auto rifle.
Kirsten wants to create a heart on a paper card. Braving winter weather, Kirsten drills three shots into a heart shape on her target. This trick shot is performed, Kirsten adds, “for the love of shooting”.
See more cool trick shots on Kirsten’s popular YouTube Channel which now boasts 339,000 subscribers. Learn more about Kirsten’s shooting background on her website, KirstenJoyWeiss.com.
Brownells is a well-known retailer of guns, gun parts, tools, accessories, ammo, and pretty much everything gun-related. What you may not know is that Brownells has a very active video production department that releases new “how-to” and product information videos every week. These videos offer helpful advice on gun cleaning/maintenance, reloading, as well as selecting/assembling components for various kinds of rifles. And every week Brownells serves up a new products video. There now over 3000 videos on the Brownells YouTube Channel, a great resource.
Here are six of our favorite videos from Brownells. There’s a helpful guide to scope installation, AR owners will find some good advice on spare parts, new reloaders can learn how to use the OAL tool, and all gun owners should watch the video on ammunition storage.
Scope-Mounting — Common Mistakes to Avoid
Always be careful when mounting a rifle scope. This isn’t a super-complex or highly technical task, but there are ways you can mess it up. This video explains common pitfalls to avoid when mounting a scope.
1. Make sure the rings don’t touch ANY part of the turret housing, objective bell, or eyepiece.
2. Be certain the scope rings are tightly clamped to the scope base. Grasp the scope with one hand and the rifle with the other, then ensure there is no play.
3. Make sure there’s clearance between the objective bell and the rifle. No part of the scope should touch the rifle itself.
4. NEVER over-tighten the scope rings. You can actually crush the scope tube and damage the optic beyond repair. Stick to the torque specs!
How to Use Hornady OAL Tool and Hornady Bullet Comparator
Gun Tech Steve Ostrem explains how to properly use Hornady’s Overall Length Gauge to determine length-to-land precisely. The OAL Gauge uses a “Modified Case” that threads onto the tool and holds a bullet. Push on the back of the gauge until you feel the bullet just touch the rifling. (We do this gently at first, tapping the rod a couple time to ensure the bullet is aligned correctly). Once you’ve got the length, then use the tool with a comparator on your calipers to get the length-to-lands. NOTE: We recommend taking the measurement 3-4 times in a row to get a reliable number. With a little practice your should be able to get repeatable measurements within .0015″.
Air Travel with Firearms — Key Regulations You Must Follow
You can travel on commercial airlines with firearms. But you must follow the TSA regulations, and your particular airline’s rules. First, make sure your guns are UNLOADED before your leave home. Guns need to be carried in proper hard-sided cases that cannot be pried open. Be prepared to unlock the case if the TSA wants to inspect what’s inside. TSA agents can cut the locks if they need to open the case but can’t locate you. If you use special TSA-approved locks, TSA agents have master keys that let them open the case without destroying your locks. You CAN transport up to 11 pounds of ammunition — with restrictions explained in the video.
How to Store Ammunition Safely and Securely
This has been one of the most popular Brownells videos — with over 1.7 million views. Here’s the deal — ammunition WILL keep for a long time if you store it properly. DO store ammunition in a cool, dry place that doesn’t have wide temperature swings. Temperature cycling will also degrade primers and powder. Put it in airtight ammo cans to keep out the moisture. Tupperware containers will work too. Brownells also recommends putting moisture-absorbing silica packs in your ammo containers. DON’T just keep ammo in factory cardboard factory boxes stacked in the basement, attic, or garage (especially on the floor). Factory ammo boxes can absorb moisture which can degrade primers and corrode the brass cases. Yes, sealed military ammo will usually handle this kind of storage for quite a while, but it’s still not wise.
Must-Have Spare Parts for AR-Platform Rifles
In this video, two knowledgeable gun techs answer the question: “What spare parts should I keep on hand for my AR-15?” On the list are: Gas Rings, Buffer Spring, Extractor Spring and Pin. NOTE: You may want to try the one-piece spiral gas ring rather than the standard rings which require alignment. The cotter pin and cam pin can also easily get lost when the Bolt Carrier Group is disassembled for cleaning. On the lower receiver you’ll want spare springs and detents for the pivot/takedown pins. If you’re using lighter-power springs, keep standard-power spares on hand. If your rifle stops working, swap in the factory-spec springs to find out if the problem is the gun or your ammo. Also, if you have upgraded your trigger, always keep the original trigger as a backup.
Cleaning Advice for .22 LR Rimfire Rifles
Gun Techs Steve Ostrem and Caleb Savant debunk some myths about cleaning .22 LR barrels. One myth is that cleaning will harm the accuracy of a .22 LR barrel. Caleb thinks this myth is the result of people cleaning a barrel from the muzzle and damaging the muzzle crown, which CAN diminish accuracy. If it’s done right, cleaning won’t damage the bore. However, you certainly do NOT have to clean your 22 LR’s bore every time you go to the range. But DO clean the action every time you shoot the rifle, especially on a semi-auto. What about shooting a lot of lead bullets? Won’t that lead up the bore? The guys give us the straight skinny on lead fouling, too. When you see your .22 LR rifle’s groups opening up, you may want to consider cleaning.
This article is Copyright 2023 AccurateShooter.com. Reproduction on any other website gives rise to monetary damages.
At the request of our readers, we provide select “Deals of the Week”. Every Sunday afternoon or Monday morning we offer our Best Bargain selections. Here are some of the best deals on firearms, hardware, reloading components, optics, and shooting accessories. Be aware that sale prices are subject to change, and once clearance inventory is sold, it’s gone for good. You snooze you lose.
NOTE: All listed products are for sale to persons 18 years of age or older. No products are intended for use by minors.
1. Bullet Central — Berger Bullets Promo, All Calibers
⏺ Great bullets in stock at very competitive prices
Bullet Central has a very large selection of Berger bullets in stock right now. You’ll find great prices on match bullets in popular .224, 6mm, 6.5mm, 7mm, and .30 Calibers, starting at just $37.99 for 80gr 22-Cal VLDs. If you shoot a 6mmBR, Dasher, or 6GT, grab some 105gr Hybrid targets for $56.99. In addition, Berger hunting bullets — such as the 185gr .30-Cal Classic Hunter — are offered at good prices.
⏺ Fast, programmable, accurate dispenser at great price
The Frankford Arsenal Intellidropper is a high-quality powder scale/dispenser. It’s accurate to +/- one-tenth of a grain, dispenses in seconds, and can be controlled by a handy mobile App that stores charge weights for different cartridges. This unit has a 7000-grain capacity with both auto and manual trickle capability. This is a fine deal now at Natchez — you save $50 (22%) off the regular $229.99 price. The same Intellidropper is currently $199.02 on Amazon.
3. Midsouth, Powder Valley, Graf’s — Rifle Primers in Stock
⏺ Get Small Rifle Primers including popular CCI, Federal, and Remington
For the past few years, primers have been hard to find at reasonable prices. Now we are finally seeing ample inventory. Right now you can get a wide range of Rifle, Pistol and Shotshell Primers at Midsouth starting at $69.99/1000. In stock now are leading US-made brands CCI, Federal, and Remington. In addition, Midsouth has large inventories of Aguila, Fiocchi, and Unis primers. Another option are RUAG Small Rifle Primers at Powder Valley, priced at $184.99 for 2500, which works out to $75.00 per 1000. If you need large rifle primers, Graf’s has Unis Ginex large rifle, 5000 for $535.00.
4. CDNN Sports — Winchester Wildcat with Optic, $229.99
⏺ Fun rimfire rifle complete with optic — good owner reviews
Here is a fun little semi-auto .22 LR rifle at a crazy low price — $229.99 complete with a mounted Red Dot Reflex optic. The Winchester Wildcat takes Ruger 10/22 mags, and has some great features, such as field-removable lower receiver, ambidextrous controls, integral Picatinny rail, and rear barrel access. It has a good trigger and shoots well. In many respects the Wildcat beats the Ruger 10/22 while costing a lot less. If you don’t need the optic, you can get a basic Wildcat for $219.99 with Strata camo stock or $234.99 with Strata camo stock and threaded barrel.
⏺ Very rugged, full-featured TSA-approved roller case
Whether flying or just transporting your rifles to the range it’s important to protect them with a rugged, quality gun case. The solidly-built HQ Issue 41″ Tactical Rifle Case (#ad) meets all the TSA requirements and can withstand tough treatment. Offered in Flat Dark Earth (tan), this waterproof case has rollers to ease movement through the airport. Handy pick-n-pluck foam allows a secure custom fit for your firearms. NOTE: This case is 41″ overall so it will NOT fit long-barrel competition rifles unless the action is separated from the stock/chassis. For larger rifles, one good option is the Eylar 53″ Protective Roller Rifle Hard Case priced at $199.99.
6. Palmetto SA — AR15 Complete Stealth Lower (Blem), $139.99
⏺ GREAT deal on complete lower with full trigger group and adjustable stock
With changes to Federal law looming on the horizon, it may be wise to get your Black Rifle now. Here is a great deal on a complete lower with stock. The PSA AR-15 MOE Stealth Lowers include full installed trigger group, plus a nice, adjustable MagPul MOE buttstock. The prices are super low because these “blem” lowers may have a small scratch or blemish somewhere. Get the Black Stealth AR Lower for $139.99 or select the Flat Dark Earth AR Lower for $149.99.
7. Bass Pro — 9mm FMJ Pistol Ammo, $0.30/Rd ($14.99/50)
⏺ Very good prices on good quality 9mm FMJ ammunition
Need 9mm ammo for practice or action pistol competition? Right now Bass Pro has some great deals on good quality, brass-cased FMJ 9mm Luger ammunition. Choose CCI 124gr FMJ at $14.99/50rds, Winchester 115gr FMJ at $14.99/50rds, or Herters 115gr FMJ at $26.99 for 100 rounds.
When traveling by air with a handgun, the pistol must be in a case with a TSA-approved lock. The Snapsafe Treklite XL Lock Box complies with TSA rules. It will hold two compact pistols or one larger pistol with magazing (which must be UNLOADED). Made with a strong polycarbonate case, This lightweight (2.2 lb) lock box is one-third the weight of a steel box. Right now the Treklite XL FDE Lock Box is just $29.99 at Midsouth, 25% OFF the regular price.
9. Amazon — KUBEI USB Rechargeable Digital Scale, $24.99
⏺ Compact scale with USB-rechargeable battery at great price
Everyone can use an inexpensive, compact scale for loading at the range or sorting bullets or maybe even primers. One very affordable option KUBEI USB Rechargeable Digital Scale (#ad). Unlike most other inexpensive digital scales, this comes with a large dust cover with a “window” for your powder pan. Notably, this scale can be conveniently recharged with a standard USB cable — no batteries to replace ever! We have heard positive reports from Forum members about this $24.99 portable scale, which offers 9 types of weight units, calibration weight, and fold-down protective lid.
10. Palmetto SA — Walker’s Muffs + Safety Glasses, $15.99
⏺ Killer deal on hearing and eye protection combo
Is it time to replace your hearing and eye protection? Or perhaps you could use an extra set for friends? Check out this Walker’s Ultra Slim Muff & Glasses Combo. You get good quality 27dB NRR (Noise Reduction Rating) muffs AND a set of ANSI Z87.1-rated shooting glasses — all for just $15.99. That’s a great price for essential safety items. Shooters should always have both eye and ear protection whenever at the range.
As an Amazon affiliate, this site can earn revenues through sales commissions.
Editor: Many new barrels will deliver higher velocities with the same load after 100-150 rounds through the bore. The exact reasons for this speed-up are not 100% certain, and velocity increases (if any) will vary from one barrel to the next. But this “speeding up” phenomenon is common, so be prepared if this happens with your next barrel. If you do experience a significant velocity increase you should probably re-tune your load AFTER the velocity stabilizes at the higher level.
From the Sierra Bullets Blog Article by Mark Walker, Sierra New Product Development Director
In a previous post, I discussed a couple of methods to tune a load to your barrel to help achieve the best accuracy possible. People most often work on load tuning if they get a new rifle or have a different barrel installed. In both instances, the barrel is new and has not been fired very much. According to most competitive shooters, this is the most accurate your barrel will ever be, so getting it tuned and shooting accurately is a priority.
The Speed Up Phenomenon After 100-150 Rounds
Even though after you work up a load and your new barrel is shooting great, a lot of shooters notice that at around 100 to 150 rounds their rifle may stop shooting as accurately. I had this happen to a rifle and I was confused as to why something that worked so well to begin with would all of a sudden quit shooting. I decided to break out the chronograph to do another load work up to see what was going on. To my surprise, the velocity had increased around 80 fps over the original velocity! After performing another ladder test and adjusting the seating depth, the rifle was once again shooting well.
There are several thoughts on why this may happen, however, you can rest assured that it does happen. One thought is that as the barrel breaks in, the tooling marks in the throat of the chamber smooth out and allow less resistance to the bullet as it exits the bore thereby increasing speed. Another idea is that the throat area starts to get a little rough which in turn causes more resistance which increases pressure and therefore more velocity. I’m sure there are some out there who have a better understanding as to why this happens, but it can definitely affect the accuracy of your rifle. So be aware and never be afraid to rework a load to keep your rifle in tune.
Experts Confirm That Barrel Speed-Up Is Common Two respected shooters have observed an increase in velocity with new barrels, typically after 100 rounds. Gunsmith and Hall-of-Fame benchrest shooter Thomas “Speedy” Gonzalez has documented barrel speed-up with testing. Moreover, Speedy’s bore-scope barrel inspections revealed a smoothing of the barrel lands. Jim See, a top PRS competitor, has encountered barrel speed-up many times. Accordingly, he re-tunes his load at 150 rounds.
“Alex Lipworth and I documented this phenomenon about four years ago and I have told all my customers about this. My son Mikee would shoot 100 rounds through all new barrels we planned on shooting before we would begin to do load development. We had a shooting snail that caught all the bullets set up in front of an indoor bench. We called it a wear-in process because upon careful examination of the bore when the ‘Speed Up’ takes place the cut-rifled bore resembles that more of a button-rifled barrels with the lands taking on more the softer look of a buttoned bore.” — Speedy Gonzalez
“Seen it [barrel velocity increase] too many times to count. All my match barrels get a ‘generic round’ loaded for them, which has worked well in barrels historically. After I hit 150 rounds I fine-tune the load and never look back, until the tube starts to slow down at it’s life end.” — Jim See
Let’s face it, shooting the same bullseye or grid targets over and over again can get boring. Here’s a unique set of Playing Card Targets, courtesy of the NRA. With very cool graphics and a page-filling design, these eye-catching targets can work both indoors and outdoors.
At 100 yards, these are fun scoped rifle targets — you can aim at the small circles or dots on each target. Indoors, with a pistol, just aim for the larger graphic elements, such as the red hearts or black diamonds. If you have access to a color printer, these targets look great.
The NRA Blog published this nice set of super-sized playing card targets. These boast a variety of aiming points (large and small) so they work well for rifles as well as pistols. On the Queen of Diamonds, aim for the large bull-style designs in the “red zone” or aim for the smaller dots on the periphery. For a real challenge, try to shoot each one of the 26 small red diamonds in the curved, central white stripes.
On the Five of Clubs target, you can aim for the smaller club symbols, or shoot for the orange, purple, and green “dripping paint” bulls in the large, central club. The Ace of Spades target offers a colored bullseye in the center, plus a very small bullseye in the letter “C”. That should provide extra challenge for those of you with very accurate rifles. Enjoy these targets.
The gun, crafted by Eric Wallance of Nawaka Firearms, features an XP-100 action, Jewell trigger, and 15″-long, Brux 1:8″-twist barrel with aluminum muzzle brake. Interestingly, this gun does not have a traditional recoil lug. Instead, gunsmith Wallace milled out a lug from the bottom of the XP-100 action to save weight. On top of the action, the rig carries a Sightron Inc S-III 6-24X56mm scope in Kelbly rings on a custom +20 MOA rail.
Hornady A-Tip Match Is Official Bullet of PRS
Happy Valentine’s Day
Two respected shooters have observed an increase in velocity with new barrels, typically after 100 rounds. Gunsmith and Hall-of-Fame benchrest shooter Thomas “Speedy” Gonzalez has documented barrel speed-up with testing. Moreover, Speedy’s bore-scope barrel inspections revealed a smoothing of the barrel lands. Jim See, a top PRS competitor, has encountered barrel speed-up many times. Accordingly, he re-tunes his load at 150 rounds.
