The National Rifle Association of America (NRA) has announced the conclusion of a long legal battle with New York Attorney General Letitia James. In August 2020, James sued to dissolve the Association and seize its assets following a campaign-trail promise to target the NRA, its banks, and its donors. After the NRA defeated New York’s efforts to dissolve the NRA, James sought a court-appointed monitor to oversee the gun group. The court rejected that request this summer.
In the end, Justice Joel Cohen denied all invasive relief sought by the New York government. However, in a ruling issued on 12/11/24, Judge Cohen has ordered certain compliance and governance measures, some actually proposed by the NRA itself, and several of which were already underway. But notably, the NRA is not obligated to pay fines or penalties under the recent judgment. Instead, the judgment entitles the NRA to collect millions of dollars from former executives found to have breached their duties.
As explained by the N.Y. Attorney General’s office, the NRA must make significant administrative changes: “This judgment follows a jury verdict which found that the NRA failed to properly administer charitable funds and violated state laws[.] Based upon the trial evidence presented by the Office of the Attorney General (OAG), the court found that the NRA must enact more than a dozen reforms[.]
The judgment requires the NRA to change how it conducts its board elections, hire an outside consultant to advise on the NRA’s compliance with the court’s directives… and increase leadership’s transparency and communication with board members. The NRA is also ordered to change its audit committee, by permanently barring anyone who served on the committee between 2014 and 2022 from continuing to serve on the committee and requiring future members to be elected by the full board, not hand-picked by the Board President. The judgment also requires former Executive-Vice President Wayne LaPierre to pay the $4.35 million and Phillips to pay the $2 million ordered by the jury [plus interest].”
NRA President Comments on Resolution of New York Court Case
“The NYAG sought to shut us down, and then appoint outsiders to oversee management of this historic organization,” said NRA President Bob Barr. “Fortunately for freedom lovers everywhere, this politically motivated attempt failed. [We defeated] an unprecedented attack from the highest levels of New York government. The NRA remains strong, safe, and independent – continuing to protect freedoms.”
The recent judgment caps a six-year saga during which the NRA withstood not only the NYAG’s lawsuit, but a barrage of other blue-state regulatory actions, congressional inquiries, and a debanking effort by New York officials that became the subject of a blockbuster Supreme Court decision in May. In that case, NRA v. Vullo, all nine justices backed the Association’s First Amendment claims. See video below:
“The last six years have been difficult for NRA members, staff, and supporters”, said NRA CEO and Executive Vice President Doug Hamlin. “With Judge Cohen’s ruling, we can now put this challenging chapter in NRA history behind us and focus solely on the business of the members and all law-abiding gun owners. The NRA is committed to transparency, compliance, and good governance going forward. Today’s outcome ensures that NRA members can support the Association, America’s oldest civil rights organization, with confidence.”
Story Tip from ELR Researcher. We welcome submissions from our readers.
Make Your Own Length-to-Lands Gauge to Check Bullet Position
Here’s a tip we feature every year or so, because it is something that costs nothing, yet can be very useful in the reloading process. With a simple, easy modification to a fired case, you can determine the length to lands in your rifle barrel. As long as you set the tension right, the measurements should be repeatable, and you’ve just saved yourself $47.98 — the combined cost of a Hornady C-1000 commercial OAL gauge ($41.99) and Modified Case ($5.99).
To achieve best accuracy with a rifle, you must control bullet seating depth very precisely, so all bullets end up in the same place relative to the entrance of the lands, every time. There may be multiple cartridge OALs which prove accurate. However, with each, you first need to determine a “zero” point — a reliable, and repeatable OAL where the bullet is “just touching” the lands.
There are tools, such as the Hornady (formerly Stoney Point) OAL Gauge, that will help you find a seating OAL just touching the lands. However, the tool requires that you use a special modified case for each cartridge you shoot. And, while we find that the Hornady OAL Gauge is repeatable, it does take some practice to get in right.
Make Your Own Length-to-Lands Gauge with a Dremel
Here’s an inexpensive alternative to the Hornady OAL tool — a slotted case. Forum member Andris Silins explais how to create a slotted case to measure length to the lands in your rifle:
“Here’s what I did to find length to lands for seating my bullets. I made four cuts into the neck of fire-formed brass. Then I pressed the bullet in lightly and chambered the entire gauge. As the cartridge chambers, the bullet slides back into the case to give you length to lands. It took less than five minutes to get it cut and working. A little light oil in the barrel just past the chamber helps ensure the bullet does not get stuck in the lands. It works great and is very accurate.
How to Adjust Tension — Length and Number of Neck Cuts
I made the cuts using a Dremel with a cut-off wheel. You can adjust tension two ways. First, you can make the cuts longer or shorter. Longer cuts = less tension. If you used only three cuts instead of four you would get more tension. The trick is to be gentle when you open and close the bolt. If you ram the bolt closed you may wedge the bullet into the lands. When you open the bolt it helps to keep a finger or two near by to guide the case out straight because the ejector wants to push it sideways.”
At the request of our readers, we provide select “Deals of the Week”. Every Sunday afternoon or Monday morning we offer our Best Bargain selections. Here are some of the best deals on firearms, hardware, reloading components, optics, and shooting accessories. Be aware that sale prices are subject to change, and once clearance inventory is sold, it’s gone for good. You snooze you lose.
NOTE: All listed products are for sale to persons 18 years of age or older. No products are intended for use by minors.
1. Graf & Sons — Berger Hybrid Bullets In Stock
⏺️ Good deal on very successful match bullets, multiple calibers
When it comes to competition bullets it’s hard to beat Berger’s Hybrid Target Bullets. These match projectiles utilize their industry-leading hybrid ogive, which blends tangent and secant designs to optimize efficiency, reduce wind-drift, and minimize sensitivity to seating depth.
2. Powder Valley — Hodgdon Powder Sale
⏺️ Great, hard-to-find powders in stock at good prices
Powder prices are still quite high compared to a few years ago, but the current Hodgdon Powder Sale at Powder Valley offers major savings. Many of the most popular powders are IN STOCK with substantial discounts so this is time to buy before prices go up next year.
3. CDNN Sports — Winchester .22 LR Wildcat, $169.99 w/rebate
⏺️ Fun rimfire rifle complete with optic — good owner reviews
With the Winchester Holiday Rebate you can get a .22 LR Winchester Wildcat (with optic) for just $169.99. That’s a steal for a reliable, semi-auto rimfire rig with a Red Dot Optic — a good choice for plinking and NRL22 matches. Now through 12/31/24 if you buy a Winchester Wildcat or Xpert rifle you get $25 back by mail-in rebate. The Winchester Wildcat takes Ruger 10/22 mags, has a good trigger, field-removable lower receiver, ambidextrous controls, integral Picatinny rail, and rear barrel access. If you don’t need the optic, you can get a basic Wildcat for just $159.99 with Strata Camo stock ($184.99 before rebate).
4. EuroOptic — ZEISS Holiday Binocular Sale
⏺️ Very high-quality binoculars with significant savings now
Hunters need good binoculars for spotting game animals. The ZEISS Terra Binoculars offer impressive performance for the price. Right now you can save $125 on these budget-friendly binoculars that combine outstanding SCHOTT ED glass elements with a compact weather-sealed housing. The 10×42 and 8×42 models are marked down from $499.99 to $374.99, a $125 discount. Focus is fast and easy and these Terra binocs offer excellent twilight performance.
⏺️ Awesome deal on two Smith & Wesson .40 S&W handguns
Here are great deals on two excellent .40 S&W defensive pistols. Right now CDNN Sports has slashed prices on quality M&P Shield .40 S&W pistols. Choose either a 4″ barrel version at $379.99 or a more compact 3.1″ model at $389.99. The larger model has fiber optic sights and no thumb safety while the shorter model has ported slide, thumb safety, and Tritium night sights. Both these handguns come with a FREE S&W Performance Center pistol cleaning kit with jags, brushes, slotted tips, t-handle, and patches.
6. Amazon — Frankford Arsenal Case Trim Prep Center, $151.96
⏺️ Versatile system popular with hand-loaders — good price
The Frankford Arsenal Case Trim and Prep Center (#ad) houses the key tools you need to trim, chamfer, and deburr brass, and clean primer pockets. The case holder features an adjustable collet and bushing system that indexes the case shoulder and can be set to precisely trim brass to an exact length. Built from aluminum with a durable steel frame, the Frankford Case Trim and Prep Center is sturdy and has earned praise from purchasers. Right now it is just $151.96 on Amazon (#ad), a 24% discount.
7. Amazon — Frankford Arsenal Depriming Tool, $39.99
⏺️ Convenient tool — no press needed to deprime anywhere
Decapping fired brass can be tedious when using a reloading press and decapping die. Make things easier with the Frankford Arsenal Platinum Series Hand Deprimer Tool (#ad). You can deprime cases while watching TV. This handheld unit features an easily removable spent primer catch tube and an assisted-ejection case holder for easy removal of deprimed cases. The handle is spring-loaded to return the deprimer to the start position automatically.
8. Palmetto State Armory — CCI 9mm Ammo, $11.49/50 rds
⏺️ Quality brass-cased 9mm ammo at an ultra-low price
The 9mm Luger is the most popular centerfire pistol cartridge. Here is a great 9mm ammo option. Grab this CCI Blazer 9mm 124gr ammo for only $11.49 per 50-rd box — the best price we’ve found on very good CCI 9mm Luger ammunition. For recreational shooting, CCI Blazer 9mm ammo delivers consistent reliability and exceptional value.
⏺️ Versatile 2-part shooting rest for pistols and hunting rifles
When sighting-in a hunting rifle or testing pistol loads, it’s really useful to have a basic rifle rest. The very affordable Caldwell Matrix Adjustable Rest (#ad) is specifically designed to work with both rifles and pistols. Use the front section by itself with a handgun, then attach the rear support for rifle shooting. An innovative spring-loaded elevation system allows for fast one-handed, no wobble adjustment.
10. Amazon — Wheeler P-Handle Tool Set, $45.78
⏺️ Big discount on very complete set of drivers
If there’s one thing everyone needs in the workroom it’s a good set of hex and torq drivers. You can grab the Wheeler 30 Piece SAE/Metric Hex and Torx P-Handle Set (#ad) for only $45.78 and have everything you need to work on guns and gear. This kit has SAE and Metric hex-type driver, plus Torx drivers, offering the full range of drivers you might need.
You can save big bucks on guns and gear with factory rebate programs. But with the end of 2024 fast approaching, dozens of great shooting industry rebate programs are about to expire. Many major rebates on rifles, pistols, optics, and/or ammunition require purchases no later than December 31, 2024.
If you are in a buying mood (maybe to get a new gun as an Xmas gift to yourself), check out these notable rebate offers. We showcase 16 great discount/rebate programs. These rebates can save you big bucks on rifles, pistols, shotguns, ammo, or gear. Many of these rebates are worth $100 or more. For example you can Save $200 on a Colt CBX Precision Rifle, Save $150 on a Franchi Rifle, or Save $50 to $150 on an Smith & Wesson wheelgun. Note: most of these promos are good through the end of December 2024, but some expire in January 2025 — so check the dates.
Image Courtesy NSSF. This story is based on an NSSF Article.
‘Tis the season of gift-giving (Christmas Day is 8 days hence). Perhaps you’re considering giving a a first rifle to your grandson or perhaps a carry pistol to a spouse. When making a gun gift to a friend or family member, however, there are some very important legal considerations. Also the rules on firearms gift transfers vary from state to state. Bottom line here — you need to know the law BEFORE you deliver that shiny new firearm to a family member, close friend, or relative.
The first thing to remember if you’re thinking about giving someone a gun is that … it’s a gun! You already know that ownership of a firearm brings with it some serious legal and ethical obligations that other consumer products don’t. So let’s look at some questions you may have about giving a firearm as a gift.
Image Courtesy NSSF
The first question you have to ask is whether the intended recipient can legally own the firearm where he or she lives. With more than 20,000 different gun laws on the books, even the kinds of firearms that law-abiding citizens can own vary from place to place. For example, juveniles (under age 18) generally speaking are precluded by law from possessing a handgun. Check out the Bureau of Alcohol, Tobacco, Firearms and Explosives (ATF) website for an overview of local laws and, whatever you do, don’t forget that you can never under any circumstances transfer a firearm to someone you know — or have reasonable cause to believe — legally can’t own one. That’s a federal felony, so be careful.
There’s no federal law that prohibits a gift of a firearm to a relative or friend who lives in your home state. Many states — including California, Colorado, Connecticut, Delaware, New York, Oregon, Rhode Island, Washington State and the District of Columbia — require you to transfer a firearm through a local FFL-holder so an instant background check will be performed to make sure the recipient is not legally prohibited from owning the gun. Maryland and Pennsylvania require a background check for private party transfer of a handgun. And yes, Oregon has new restrictions due to the passage of Ballot Measure 114 (though a State Judges has issued an injunction blocking some provision BM 114). There are exceptions, so it’s important to check the law of your state or ask your local firearms retailer.
Consider a Gift Card Instead of Direct Gift
The ATF recommends that if you want to give someone a new firearm, rather than going to a gun store and buying the gun on your own, consider instead purchasing a gift certificate/card from your favorite gun retailer. Then give that gift card as the present. That way the recipient can choose the exact gun he or she wants, and there’s no question about who is “the actual buyer of the firearm”, which is a question any purchaser must certify on the Federal Form 4473 at the time of purchase. The Gift Card option avoids any “straw purchaser” issues.
Intra-Family Transfers and Antique Arms
What if you want to give “Old Betsy,” your favorite old deer rifle, to your son or daughter as a college graduation gift? Again, in some states, there’s no law that says you can’t, but many states require even intra-family transfers to go through a licensed dealer. Remember, you can never transfer a firearm directly to another person who is a resident of a different state. In that case, you must transfer the firearm through a licensed dealer in the state where the person receiving the gift resides.
Using a gift certificate from a firearms retailer near where the recipient lives might be a good solution. Be safe and check with an in-state FFL dealer before you give any firearm to a friend or family member.
Proud owner Dirk L. says: “This is my first build — never thought it would be a .308!”
Here’s a handsome F-TR rifle with a beautiful red stock that suits the holiday season. This ruby red beauty was a recent addition to the long-running Pride and Joy Rifle thread in our Shooters’ Forum. The rifle belongs to Forum member Dirk L. (aka “Pinkes”) who hails from South Africa. This is a .308 Win, with 30″ Bartlein barrel, and X-Max action. The stock is a custom composite with carbon fiber for strength and lightness. And yes this rifle shoots as good as it looks. Check out the impressive 5-shot groups below…
X-Max for Xmas — Impressive Metal-work
Along with that beautiful red stock, this F-TR rig has some very cool features, including a South African-crafted X-Max Action. The action designer Piet Welgemoed explains: “The X-Max action body is 17-4PH stainless steel pre-hardened to 44° Rockwell. Bolt and handle are one-piece stainless steel, nitrated to 55° Rockwell 0.2mm deep. Bolt is also fluted. Inside is the firing pin with washers (see below). The washer cuts the lock-time almost by half and also weighs less. The bolt-knob and bolt shroud are CNC aluminum. The action has very tight tolerances.” The complete action with +20 MOA rail and trigger weighs 1.475 kg (3.25 lbs).” Owner Dirk notes that the competition trigger, set at 3.0 ounces, is also Welgemoed’s design.
Wicked Accuracy with Bartlein Barrel, Varget, and 220gr SMKs
This gun has already proven to be a great shooter. Below are two FIVE-shot groups at 100 meters. The group on the left is in the low threes, with three of five shots essentially in one hole. Dirk loads Lapua .308 Palma brass and #2231 200gr Sierra Matchkings, seated 20 thousandths off the lands. The Varget powder and CCI primers drives the 200gr SMKs at 2620 fps.
Brass: Lapua .308 Win Palma (small primer) | Primers: CCI 450 | Powder: Varget
Bullet: New 200gr SMK #2231 | Seating: 0.020″ Off | Velocity: 2620fps
Composite Stock — One of Three by Renier Mostert
And what about that beautiful red stock? The rifle’s owner told us: “This was one of three similar stocks built as a test run by Renier Mostert, a professional composite stock builder and former benchrest shooter from Pretoria, South Africa. Renier was approached by three friends, who were all looking for decent, custom-built FTR composite stocks. There were a number of stocks available to them (mostly imported), but [those] were either made of wood or aluminum. The requirements for the composite stock build was very specific. Aluminum V-Blocks for the actions were required. The stocks had to be light enough to carry some beefy barrels and optics without compromising rigidity and still be within the F-TR weight limit. The three friends supplied Renier with an imported wooden stock as their shape of choice. Although the shape was quite straight-forward, Renier made a few dimensional changes to features which were not symmetrically correct on the sample, and then built a mold from it.”
Renier uses several methods to craft composite stocks for various disciplines: F-Class, benchrest, competition rimfire, hunting, and tactical. For this build he chose to build a shell constructed of a well-planned mix of woven fiberglass cloth and bi-directionally woven carbon fiber with aerospace quality epoxy resin to reduce weight in some areas and increase stiffness in other areas. He used a wet lay-up process where the two halves gets laid up and joined together while still wet to form a complete, continuous shell. The closed mold gets cured under pressure in an oven for several hours at very specific temperatures. After curing, the shell is filled with a high-tech mix of lightweight filler and epoxy resin. The composition of the mix varies in different areas of the stock to facilitate more strength or reduced weight where applicable.
After the initial build, the aluminum hardware was installed. An adjustable cheek piece, Anschutz rail, and adjustable recoil pad mechanism were installed. The stocks were inletted by Renier, while the final fitting and bedding procedures were left for each customer’s gunsmith to complete. The stocks were light enough for the rifles to comfortably be within the F-TR weight limit. A barrel tuner was mounted on one of the rifles, and the rifle still made the F-TR Class weight limit, 8.25 kg (including bipod). The bipod shown in photos in the SEB Joy-Pod.
Paint — Candy Apple Red over Metallic Silver Base
After final gunsmithing, the stocks were returned to Renier Mostert for custom painting. The rifle featured in this article was done in Candy-Apple Red paint from DNA Paints (an Australian company). To get the desired effect, a metallic silver base coat was used, enhanced with a modest amount of medium coarse glitter, followed with multiple layers of candy until the correct shade was achieved. A high-quality automotive clear coat was used to finish off the paintwork.
With snow on the ground and sub-freezing temperatures in much of the country, we hope our readers are staying warn indoors with family members this Christmas week. To provide a bit of entertainment here are two videos that combine a holiday theme with the shooting sports.
In this fun video, YouTube host 22plinkster plays a holiday tune on steel plates. Using a Henry Golden Boy .22 LR lever gun, 22plinkster performs a plate-by-plate musical rendition of Jingle Bells. To hit each tuned plate in the right order takes considerable skill and concentration. But we thank 22plinkster for offering this special holiday shooting range concert.
Here we have 22plinkster once again. He wanted to see how many Christmas ornaments could be penetrated by one .22 LR round. To answer that burning question, he lined up 40 plastic Xmas bulbs in a row and then fired a single round of CCI .22 LR Velocitor ammo through the bunch, using his Henry Golden Boy lever action rifle. Did the bullet penetrate a dozen ornaments? Two dozen? What do you think? Watch the video to find out the surprising answer.
If you’ve been thinking about some last-minute Christmas shopping at Brownells, here are some money-saving codes. Brownells is currently offering 10% off purchases over $150, $10 off a $100+ purchases, and 10% Off all in-stock Ammunition. In addition, there’s a 3% discount on a wide inventory selection (no minimum purchase required). It’s simple to get these discounts — there are no buyers’ clubs to join, no forms to fill out. Just use the appropriate Discount Code during online check-out.
Brownells Winter Clearance Sale
Along with the discount codes listed below, Brownells is running a Winter Clearance Sale now with major savings on barrels, triggers, firearms, AR lowers, reloading components, optics and more. Currently 126 different items are on sale with discounts up to 50%.
Brownells December Discount Codes
Listed below are the Codes to use. Simply use the appropriate Code for your purchase at Brownells.com. These codes have no listed expiration date, so Brownells could terminate them at any time. Accordingly, we recommend you do your shopping soon. Also if the highest value code no longer works, try a lesser value CODE.
Every serious hand-loader benefits from a precise, repeatable, and efficient powder dispensing system. There are many electronic powder dispensers on the market, starting at about $195 for a Frankford Arsenal Intellidropper and $240 for a Lyman Gen6. At the high end, the ultimate powder weighing/dispensing system would be an Auto-Trickler V4 mated to an top-tier electronic Force Restoration scale. Such a system can run $1200 or more, depending on scale cost.
In today’s Saturday video showcase we feature eight videos about electronic powder dispensers, as well as Auto-Trickler systems (both V3 and V4). If you are in the market for a new powder scale/dispenser system, we recommend you watch these videos. You may be surprised by some of the findings, and you will certainly learn more about these machines — their pros and cons. That knowledge can help you decide what electronic powder dispenser best deserves your hard-earned dollars.
Five Powder Dispenser Comparison Test (All Units Purchased)
If you are in the market for a sub-$500 electronic powder dispenser, definitely watch this review. This Backfire comparison test is notable because the tester spent his own money to purchase all five powder dispensers being reviewed. That means Backfire could tell the full truth, both good and bad, about the machines. In fact, Backfire bought TWO ChargeMaster Lites because one failed (See 14:12 time-mark). The reviewer liked the RCBS ChargeMaster Supreme, but his top choice overall was the Hornady Auto Charge Pro. He favored the overall design, and really liked the way the dispensing speeds could be easily set faster or slower. Here are highlights from the video review:
00:08 Speed Test
03:09 Accuracy Test
07:57 Frankford Arsenal Intellidropper
09:08 Lyman Gen 6
10:44 RCBS Chargemaster Supreme
12:03 Hornady Auto Charge Pro
14:12 RCBS Chargemaster Lite
14:41 Conclusions
AutoTrickler V3 vs. Hornady Auto Charge Pro
In the Backfire comparison video above, the Hornady Auto Charge Pro powder dispenser earned top marks among sub-$500 units. Here the Auto Charge takes on some tougher competition — an ultra-precise Force Restoration scale fitted with an Auto-Trickler V3, a system that cost upwards of $1150.00 U.S. Dollars. The Australian duo running the comparison found the Auto-Trickler system was more accurate and consistent. Notably, with a dispense speed of just 14 seconds. the Auto-Trickler V3 system was significantly faster than the Hornady machine. The Auto-Tricker V3 has been superseded by the new Auto-Trickler V4 which retails for $490.00 USD. Add $630 or more for a good Force Restoration scale such as the A&D FX-120i.
RCBS New ChargeMaster Supreme and Other ChargeMasters
In this well-made video, Gavin Gear of UltimateReloader.com does a detailed review of the new-generation RCBS ChargeMaster Supreme. He puts it through his paces, verifying its accuracy and repeatability. He shows how the unit can be programmed. At the 17:20 time-mark, Gavin employs an A&D FX-120i Force Restoration scale to check the ChargeMaster Supreme’s charge-weighing precision. The results were good.
Frankford Arsenal Intellidropper vs. RCBS ChargeMaster Link
The Frankford Arsenal Intellidropper, now just $194.49 on Amazon, was very innovative when first released, offering remote Bluetooth access and a wide range of programmable features. The downloadable App stores your load data and has preloaded bullet and powder databases. This video compares the Intellidropper with another Bluetooth-enabled modern powder dispenser, the RCBS Chargemaster Link. A free RCBS App allows you to control settings remotely.
Hornady Auto Charge Pro Review by Ultimate Reloader
As the $359 Hornady Auto Charge Pro dispenser was top-rated in the Backfire comparison at the start of this article, we thought we’d include a detailed review from Gavin Gear of UltimateReloader.com. If you are thinking of buying a Hornady Auto Charge Pro, definitely watch this video, as it is the most thorough Auto Charge Pro review on the web and Gavin is by far the most articulate tester. SEE FULL TEST.
AutoTrickler V4 and Force Restoration Scale
The AutoTrickler V4, paired with a quality Force Restoration scale, is the “Rolls Royce” of electronic powder dispensing systems, offering unrivaled charge-weight accuracy, great repeatability, and ultra-fast dispensing speeds. If you have the budget — $490 for the V4 plus $625+ for scale — the AutoTrickler V4 is a superb system that lets you load extremely accurate, consistent ammo. This detailed F-Class John video shows how to set up the system properly and control the dispensing and trickling functions.
RCBS MatchMaster vs. AutoTrickler V3 with A&D FX-120i Scale
This video is interesting because it compares the most advanced and expensive mass-market electronic dispenser, the $899 RCBS MatchMaster, with an AutoTrickler V3 mated to an ultra-precise Force Restoration scale. The AutoTrickler V3 + scale system offers wicked fast dispensing while delivering near-single-kernel precision and great repeatability. The MatchMaster has some interesting features, including dual dispensing tubes and a special slower, “Match Mode” dispensing function which provides enhanced precision.
BONUS Video: RCBS ChargeMaster Dispenser vs. Four Scales
This video answers the question “How does a common powder dispenser’s weighing accuracy compare to stand-alone scales?” Here the tester compares the weighing precision of an early-model RCBS ChargeMaster with four dedicated scales: A&D FX-120i (Force Restoration), Hornady G2-1500, Hornady GS-1500 (Gen 1), and a WAOAW milligram scale. These scales range significantly in price, with the FX-120i Force Restoration the most expensive by far. The features/prices of the four scales are listed at 4:41 time-mark. Accuracy/repeatability comparison testing with test weights starts at 10:12 time-mark.
NOTE: The contest is OVER, so ignore information on the PDF about submitting targets — that’s from back in 2013.
Here’s a target for the holidays that can provide some fun at the range. This Christmas Tree Target was created by Sierra Bullets for a 2013 contest. This contest is now over, but you can still have fun with the target. This tree target is designed to be shot at 15 yards with pistol, or at 100 yards with rifle.
Santa’s Extra Accuracy Challenge
Start with the big circles, and then work your way down to the small circles (7,8,9,10) as you build your confidence. Shoot the gifts for bonus points.
For an extra challenge (with an accurate rifle), try working your way back up to the top, aiming for the X-Marks in the circles and finishing with the small, inset star at the top. Try to hit each X-Mark and then put your final shot in the inner star. Have fun!