At the request of our readers, we provide select “Deals of the Week”. Every Sunday afternoon or Monday morning we offer our Best Bargain selections. Here are some of the best deals on firearms, hardware, reloading components, optics, and shooting accessories. Be aware that sale prices are subject to change, and once clearance inventory is sold, it’s gone for good. You snooze you lose.
NOTE: All listed products are for sale to persons 18 years of age or older. No products are intended for use by minors.
MidwayUSA — Big Game Hunting Sale, Large Product Selection
⏺️ » Major discounts on hunting optics, accessories, gear, ammo and more…
If you’re in the market for hunting gear and ammo, check out the Big Game Hunting Sale over at MidwayUSA. Here you’ll find deep discounts on everything you’ll need for your next hunt. You’ll find major savings on rifle scopes, spotting scopes, trail cams, field tripods, tree-stands, walkie-talkies, boots and other hunting gear. In addition, a huge selection of hunting ammunition from Barnes, Federal, Hornady, Nosler, Remington and Winchester is ON SALE.
Midsouth — Hornady Tool and Product Sale (Thru 8/31/2026)
⏺️ » Big Savings on presses, reloading tools, dies and more
Midsouth is running a big Hornady Reloading Tool Sale right now. Get 10-15% off a huge range of Hornady products including Reloading Presses (and Press Combo Kits), Dies, Gauges, Case Prep Tools, Priming Tools, Trays and Cleaning supplies. In addition, many types or Hornady bullets, brass, and loaded ammo are on sale. Many of these Hornady items are available at some of the lowest prices we’ve seen in a while.
As an Amazon affiliate, this site can earn revenues through sales commissions.
There has a been a notable federal legal holding regarding the National Firearms Act of 1934 (NFA). Two consolidated lawsuits — Jensen v. ATF and Silencer Shop Foundation v. ATF — had challenged the NFA’s regulation of now-untaxed firearms, such as suppressors, short-barreled rifles, and short-barreled shotguns. In a memo for the cons the judge held the registration requirements are no longer valid. U.S. District Court Judge James Wesley Hendrix ruled that “[b]y zeroing out the transfer and making taxes for most NFA firearms, Congress eliminated the constitutional basis for the regulations that formerly supported the taxes for those firearms.”
Gun reviewer and attorney Colion Noir explained: “For ninety years, the government defended NFA registration by tying it to Congress’s taxing power. Then the tax disappeared, and suddenly the government tried to argue the same paperwork could be justified another way. The judge didn’t buy it. And honestly, the way the gun groups set this up was borderline masterful. They beat the NFA at its own game.”
The Court’s injunction applies to “the plaintiffs and, where applicable, the plaintiffs’ agencies, political subdivisions, members, and customers—both current and future,” but does not take effect for 7 days “to allow the defendants to seek relief, if any, at the appellate level.”
The Jensen v. ATF plaintiffs included three individuals, Hot Shots Custom LLC, the Texas State Rifle Assoc., FPC Action Foundation, and the Citizens Committee for the Right to Keep and Bear Arms. NOTE: This Jensen Case had been consolidated with a similar legal challenge entitled Silencer Shop Foundation v. ATF, with plaintiffs Silencer Shop Foundation, Silencerco, Firearms Regulatory Accountability Coalition, Gun Owners Foundation, Gun Owners of America, Inc., Brady Wetz, B&T USA, and Palmetto State Armory.
The opinion was issued on August 5, 2026, in the U.S. District Court for the Northern District of Texas. READ Memorandum Opinion and ORDER.
Because Congress eliminated the NFA’s making and transfer taxes for most regulated firearms in 2025, the District Court held the Act’s remaining registration and recordkeeping mandates lack any valid constitutional foundation.
“This is a massive win and an important step forward in our strategic plan to end the NFA. We cannot wait to fully and finally eliminate this unconstitutional scheme so people can exercise their rights when, where, and how they choose.” — Brandon Combs, FPC President
Hunting season is underway now in many states. That means it’s time to inspect all your hunting gear, including your scope set-up. If you have a new optic, you’ll want to get it mounted correctly on your current rig. And if you have a new hunting rifle, you’ll need to mount the properly rings and install the riflescope so that you have the correct eye relief.
A proper scope installation involves more than just tensioning a set of rings — you need to consider the proper eye relief and head position, and it should be leveled correctly. This video shows a simple, quick method to mount a scope. The method assumes that the reticle (cross-hairs) are square without the turret. You’ll want to confirm that with a plumb line hanging straight down, a procedure you can do indoors.
In this NSSF video, Ryan Cleckner shows how to set up a scope on a hunting or tactical rifle. Ryan, a former U.S. Army Sniper Instructor, notes that many hunters spend a small fortune on equipment, but fail to set up their rifle to use the optics optimally. Cleckner likens this to someone who owns an expensive sports car, but never adjusts the seat or the mirrors.
Ryan notes that you want your head and neck to be able to rest naturally on the stock, without straining. You head should rest comfortably on the stock. If you have to consciously lift your head off the stock to see through the scope, then your set-up isn’t correct. Likewise, You shouldn’t have to push your head forward or pull it back to see a clear image through the scope. If you need to strain forward or pull back to get correct eye relief, then the scope’s fore/aft position in the rings needs to be altered. Watch the full video for more tips.
Tips on Mounting Your Scope and Adjusting Your Comb Height:
1. Normally, you want your scope mounted as low as possible, while allowing sufficient clearance for the front objective. (NOTE: Benchrest shooters may prefer a high mount for a variety of reasons.)
2. Once the scope height is set, you need to get your head to the correct level. This may require adding an accessory cheekpad, or raising the comb height if your rifle has an adjustable cheekpiece.
3. Start with the rifle in the position you use most often (standing, kneeling, or prone). If you shoot mostly prone, you need to get down on the ground. Close your eyes, and let you head rest naturally on the stock. Then open your eyes, and see if you are too low or too high. You may need to use a cheekpad to get your head higher on the stock.
4. If your scope has a flat on the bottom of the turret housing, this will help you level your scope. Just find a flat piece of metal that slides easily between the bottom of the scope and the rail. Slide that metal piece under the scope and then tilt it up so the flat on the bottom of the scope aligns parallel with the flats on the rail. Watch the video at 8:40 to see how this is done.
The Court’s injunction applies to “the plaintiffs and, where applicable, the plaintiffs’ agencies, political subdivisions, members, and customers—both current and future,” but does not take effect for 7 days “to allow the defendants to seek relief, if any, at the appellate level.”
In this NSSF video, Ryan Cleckner shows how to set up a scope on a hunting or tactical rifle. Ryan, a former U.S. Army Sniper Instructor, notes that many hunters spend a small fortune on equipment, but fail to set up their rifle to use the optics optimally. Cleckner likens this to someone who owns an expensive sports car, but never adjusts the seat or the mirrors.
