Nobody likes to spend hours manually chamfering cases and cleaning primer pockets. There are simple hand tools that will perform these tasks, but the process is time-consuming and tedious after a couple dozen cases. To speed up case prep duties, you can get one of the large, powered case prep centers. These function well, but frankly we didn’t want to give up that much precious space on our reloading bench. One good solution is Hornady’s compact Case Prep Trio (item 050160). This triple-threat tool packs a lot of functionality in a small package.
This cleverly-designed powered tool has a small footprint, yet it can perform three tasks as well as much more expensive, tower-style case prep units. The Hornady Case Prep Trio is now $85.99 at Midsouth Shooters Supply. We’ve used this machine and it works well. The only negative is that you will get metal shavings on your bench (unlike some of the larger case prep centers). We’ve seen some guys put a small pan under the power head — then you can just dump the shavings out of the pan.
With three active stations, you can chamfer, deburr and clean primer pockets without having to change tools. The Case Prep Trio ships with inside chamfer, outside chamfer, and deburr tools. You can also use the machine with other optional 8/32 threaded accessories such as primer pocket reamers and case neck brushes. Conveniently, the Case Prep Trio has on-board storage for your tool-heads. User reviews have been very positive.
At the request of our readers, we provide select “Deals of the Week”. Every Monday morning we offer our Best Bargain selections. Here are some of the best deals on firearms, hardware, reloading components, optics, and shooting accessories. Be aware that sale prices are subject to change, and once clearance inventory is sold, it’s gone for good. You snooze you lose.
1. Grafs.com — Lapua Bullets on Sale, Up to 49% Off
You know Lapua makes truly superior brass, but have you tried Lapua bullets yet. You should. The Scenar and Scenar-L match bullets are outstanding. In one of our rifles (a 6mmBR), Lapua’s original 105gr Scenar bullets out-shot every other projectile we tried. And the Scenar-L bullets are some of the most consistent bullets (for weight and base-to-ogive) we’ve ever measured. Now you can get these outstanding Lapua match bullets, plus excellent Lapua hunting bullets at major savings. Here are some of the best deals on great Scenar-L Match Bullets now at Grafs.com:
.224 Cal 77gr HPBT Scenar-L: $24.99/100 (Save 46%) (Great for Service Rifle) 6mm (.243) 90gr HPBT Scenar-L: $369.99/1000 (Save 18%) (Great XTC and PRS Bullet) 6.5mm (.264) 120gr HPBT Scenar-L: $259.99/1000 (Save 39%) (Great for 6.5 Creedmoor) 7mm (.284) 180gr HPBT Scenar-L: $28.99/100 (Save 46%) (Superb F-Open Bullet) .308 Cal 155gr HPBT Scenar-L: $299.99/1000 (Save 37%) (Excellent Palma Bullet) .308 Cal 220gr HPBT Scenar-L: $30.99/100 (Save 46%) (Excellent F-TR Bullet)
2. CDNN — Winchester XPR Hunting Rifle, $279.99 After Rebate
Looking for a good hunting rifle at a great price? Check out this promotion for the Winchester XPR. This is a fine-handling rig with a smooth bolt and many chambering options. Right now at CDNN Sports the basic gray-stocked Winchester XPR is on sale for $379.99. But here’s the kicker, Winchester is offering a $100.00 Mail-In Rebate. That drops your net cost to just $279.99. That’s an insanely good deal. You can also get the XPR in Vias Camo for $299.99 after rebate.
3. Midsouth — Norma Tac-223 .223 Rem Ammo, $5.99/20 rounds
Planning a late-season varmint hunt, or need some reliable ammo for a 3-Gun match? Look no further. This .223 Remington Norma Tac-223 FMJ is good ammo, a lot better than bulk commercial reloads, and not much more money. On sale now for $5.99 for a 20-round box, this quality Norma ammo is just thirty cents ($0.30) per round! You can also get this ammo by the case at Brownells, $244.99 for 800 rounds.
Here are two reviews from actual Midsouth customers who bought and shot this ammo:
“Amazingly accurate, great for target practice and plinking, and Norma brass! Believe it would be very good for varmit hunting. Price point is awesome for what you get from this ammunition. ordering more now.” Pat, Ohio
“I purchased this [Tac-223] ammo primarily for the Norma cartridge brass. It shoots great and the brass is top notch.” — Jim, Kentucky
4. DeGuns.net — S&W M&P 9mm, $399.99/$324.99 after Rebate
Here’s a great deal on a very reliable, accurate full-size 9x19mm pistol — the Smith & Wesson M&P 9mm in Flat Dark Earth finish. We like the distinctive color with contrasting matte black ambidextrous controls. For the next week, this 9mm pistol is on sale for just $399.99. To sweeten the deal further, this handgun qualifies for a $75.00 Smith & Wesson Rebate. Act soon — this DeGuns Deal is good through September 16, 2017.
Here’s the best deal we’ve found on an excellent product in high demand. The Lyman BoreCam is an electro-optical borescope with a digital display. You can record “stills” on a SD card. Our Forum members really like the BoreCam (although some wish the digital view-screen was larger). Amazon.com now has the Lyman BoreCam for $174.49 (seller Optics Planet) or $182.24 with free Prime Shipping. Grab it while you can at that price. Other vendors are charging a LOT more. For example, MidwayUSA’s price is $259.99!
6. Stocky’s — LR Stocks with Aluminum Bedding Block, $179.99
Here’s a good deal on a versatile Stocky’s Long Range Stock with aluminum V-block bedding system. For just $179.99, order this for Rem/Rem Clone long actions or short actions, with either narrow or wide (varmint/tactical) barrel channel. This would be a good choice for a varmint rifle. This is also offered with handsome hydrographic or web-pattern baked-on textured finishes for $199.99.
7. BangitAmmo.com — CCI Blazer Brass .45 ACP Ammo, $11.99
This is quality, American-made ammo with reloadable brass cases. This is cheaper than just about any name-brand .45 ACP ammo on the market offered in single-box lots. We’ve shot a lot of this ammo and it functioned 100% in 1911s, Sig P220, Glock m21, HK USP and other .45 ACP handguns. Price is $11.99 for a 50-round box ($0.24/round).
8. Brownells — Hornady Auto Charge Powder Dispenser, $139.99
Right now at Brownells the Hornady Lock-N-Load Auto Charge electronic powder dispenser/scale is on sale for $149.99. That’s a great deal but there’s more — with Brownells Coupon CODE M3P you can get the AutoCharge for just $139.99 and shipping is just one cent ($0.01) more at Brownells right how. So you can get the Hornady Auto Charge for $140.00 delivered. Hard to beat that.
9. Cabela’s — Savage 12 FV Rifle, $319.99
Here’s a good deal on a Savage hunting rifle. Purchase a Model 12 FV for $319.99 from Cabela’s. This is a sweet deal if you’re looking for a basic, no-frills hunting or varminting rifle. Cabela’s offers five chamberings at this price: .204 Ruger, .223 Remington, 22-250, 6.5 Creedmoor, and .308 Winchester. NOTE: The Cabela’s website includes a link to a $100 Savage rebate. That is for the 12 FCV, a different model. This basic 12 FV is not rebate eligible. But it’s still a good deal at $319.99.
10. Amazon — Mystery Deal, 28% off Typical Price, $199.00
Here’s our second Mystery Deal of the Week. Rest assured this is a very high quality product — at a very compelling price: $199.00 at Amazon. This item sold for $299.99 last summer, and around $270.00 just two months ago. Grab this steal-of-a-deal now. This big-name product will help you get on target all the way out to 1250 yards. We can say with some confidence you won’t find a better-performing, comparable product that represents such a good value. CLICK HERE to see the Mystery Deal.
An outfit in Washigton State, Box to Bench Precision, has developed an oversize (23.5″ x 30″) precisely-scaled target designed for load development and scope testing. This target is very innovative. On the target you’ll find various clusters of aim points for various tasks. Upper left are orange aiming spots for testing various powder charges. In the upper right quadrant are more red aim points to be used when testing bullet seating depth. Running down the center of the target is a vertical line with horizontal marks showing precise MOA and Mil heights at 100 yards — use this feature to verify your click values.
And there’s more. In the lower right quadrant (far right) are three black targets to be used for chrono work. With these you can record cold velocity, hot barrel velocity and a “Final Velocity”. Over in the lower left quadrant, in the left-most column, are three dot targets for zeroing and recording group size with load data. Finally, four more black/white targets can be used for a scope box test (aka “shooting the square”). With a box test, you move from target to target, clicking in sequence to each corner of the square in sequence, evenutally returning to your original aim point. If your scope tracks correctly, the last box test shot should end up right on top of the first shot.
Record the Entire Load Development Process on One Target
For those used to shooting at conventional bulleyes or benchrest targets, this target may seem confusing, but it can really help organize and simplify the process of load development. We like the idea of having a single, durable target that performs double-duty — serving for load development as well as scope checking. And we like the fact that the target is pretty strong — the maker says: “The target is Tear-Resistant and Water-Proof”. We’d expect a maker based in the Pacific NW to design a target that can handle wet weather.
How to Order
So how much does all this target technology cost? A single, 23.5″ x 30″ target costs $6.99. A pack of three targets costs $19.47, while a five-target pack runs $29.95 (which works out to $5.99 per target). Targets ship in a durable cardboard tube. If you like what you see and want to order these targets, visit the Box To Box Precision Online Store.
The Lee Classic Cast “O”-style press has always been an excellent value — it works as well as some other presses costing twice as much. And now Lee has improved on its Classic Cast Press design by adding a breech-lock fitting in the top. This allows you to swap dies in and out in seconds, once your dies are equipped with breech-lock quick-change bushings. The Lee Classic Cast Breech Lock press is available for under $120.00. That makes it a bargain compared to other heavy-duty single-stage presses. MidwayUSA offers this press (item #824144) for $105.29, while Natchez Shooters Supplies sells the press (item #LEE90999) for $110.49.
Breech-Lock System Allows Fast Die Exchanges
With the Lee Breech-Lock Press system, the die drops straight in from the top. Then, with a quick 1/6th (60°) turn, the die locks firmly in place (like the breech on an artillery canon). The interrupted three-start thread assures dies return and lock into the exact same position each time. Bushings cost $7.43 each at Midsouth. If you prefer, you can leave a bushing in the press, and screw your dies in normally. But consider that it normally takes a dozen or more turns to screw in a normally threaded die. The Breech-lock system is way faster.
The Lee Classic Cast press features a strong, cast-iron frame and all-steel linkage. The large 1 1/8″-diameter ram is guided by over twelve square inches of ram bearing surface. We like the fact that you can mount the handle on either side, and adjust handle angle and length. As Lee explains: “The start and stop position is adjustable with a 48-tooth, ratchet-type handle clamp. In addition, the handle length is completely adjustable. Shorten [it] when you’re loading handgun and short rifle cases.”
Lock-Ring Eliminator Quick-Change Bushings
With Lee’s basic quick-lock bushings, you control vertical die position with the normal locking ring that seats against the top of the bushing. That works fine, but Lee also offers a handy Lock-Ring Eliminator Bushing (Lee SKU 90063). This clever design combines bushing and lock-ring into a single part. The Eliminator is turned from a solid piece of steel and the lock ring is integrated into the design of the part. With the Eliminator you’ll get the most repeatable and precise die positioning because lock ring and bushing are all one piece. Moreover, some guys say the Eliminator Bushings are easier to grab and remove than the standard Lee Breech-Lock Bushings.
Press owners have praised their Lee Classic Cast Breech-Lock units. Here are reports from two MidwayUSA customers:
Five Stars: Perfect single stage press. Loads accurately 6mm BR and 308 Win for competition. Large clearance is also great for my 460 Wby and 30-378 Wby. Pistol rounds in 44 mag and 45 ACP also load easy. The press has a lot of leverage for full-length rifle case sizing. Nice primer disposal system. Lowest price for its class. This unit beats my Lyman press by several miles…. ” — J. Davidson, California
Five Stars: This thing is outstanding and better than my old RCBS partner press. Once you get the sweet setting of the die, lock it in place and next time you load, you need not fumble to find the best setting. Breech lock is the key. I load a lot of .308 Win and .223 Rem for my ARs and this requires full-length sizing. Lee meets the challenge with no flex and excellent ram/die fit and alignment. Another nice feature is that the breech-lock inserts have a lock preventing [them] from unlocking. [T]he spent primer disposal is perfect vs. RCBS where primers can miss the primer catcher. The handle can also be placed left or right as needed and shortened for small cases or pistol to reduce the handle travel.” — E. Stanley, Rockford, IL
Some top-flight components for a great-shooting rifle surely aren’t cheap — like a custom action ($1200 and up). And a premium, match-grade scope could set you back two grand or more. But there are still some great items that cost under $20.00 that can benefit any gun-owner. Here are our selection of six great shooting accessories under twenty bucks. Many of these are top-selling items on Amazon. The first item, a motion-sensitive light for your gun safe, has been a big hit with our readers.
1. Amazon — Motion-Sensitive Interior Light for Gun Safes, $9.95
Let there be light. Here’s a great accessory for your Gun Safe. This “smart” LED lamp turns itself on when you open the door, and off when you close the door. There’s a built-in magnet so you can easily attach the light to the inner walls or “ceiling” of your gun safe. It works, it’s handy, and it’s inexpensive — just $9.99 with free shipping for Prime members (or otherwise free shipping for $25+ orders). We bought two for our own firearms vault. This can provide 14 hours of light with three AA batteries (not included). Very versatile, these motion-sensor lamps can also be used in closets. NOTE: This item has been very popular with our readers, who have purchase six dozen already.
2. Amazon — Discovery Scope Level, $8.99 (30mm)
If you shoot long range, you need a scope level. This Discovery scope level is fully CNC-machined to close tolerances for a good fit. It is available with inner diameters to fit scopes with either 1″ or 30mm main tubes. The popular 30mm version is now on sale for just $8.99 while the 1″ model is $9.99. (That’s right, the bigger version is cheaper right now). You could easily pay $35.00 or more for a 30mm scope level. Purchasers have praised this product: 84% of verified buyers rated this four or five stars.
3. Amazon — 34 dB Noise Rating Ear Muffs, $17.45
These 34 dB NRR earmuffs provide excellent sound protection without being too heavy and bulky. At at $17.45, they are a great bargain. The lower section of the muff is trimmed for a narrower profile — that helps with rifle and shotgun stocks. The headband is adjustable and has comfortable padding. Select from ten color options: black (above), grey, pink, purple, teal, white, green, blue, red, and Coyote Brown (our favorite). These Pro For Sho Muffs have earned a 4 1/2 star consumer rating, with over 1,600 Amazon customer reviews. NOTE: These fit pretty tight. If you have a very large hat size you might want a different brand.
4. Midsouth — Lee Universal Decapping Die, $10.95
Midsouth sells the Lee Universal Decapping Die for just $10.95 (item 006-90292), a very good deal. There are many situations when you may want to remove primers from fired brass as a separate operation (prior to case sizing). For example, if your rifle brass is dirty, you may want to de-cap before sizing. Or, if you load on a progressive press, things will run much more smoothly if you decap you brass first, in a separate operation. The Lee Universal Decapping Die will work with cartridges from 17 Fireball all the way up to 45-70. However, NOTE that the decapping pin supplied with this Lee die is TOO LARGE for LAPUA 6.5×47, 6BR, 220 Russian, and Norma 6 PPC flash holes. Because the pin diameter is too large for these brass types, you must either turn down the pin, or decap with a different tool for cases with .059″ flash-holes. Otherwise, the Lee Decapping Die works well and it’s a bargain.
5. Amazon — Bore Stores Rifle Cases Starting at $14.99
Our take on Bore-Store Gun sleeves is simple: They work great, so buy them and use them — for ALL your valuable firearms.
These thick, synthetic-fleece sacks cushion your guns, preventing nicks and scratches. The breathable fabric wicks away moisture, and the fibers are coating with corrosion inhibitors. I personally use Bore-Stores for in-safe storage with all my guns, and I have never had one of my guns rust inside a Bore-Store, even when I lived a stone’s throw from the ocean.
Bore-Stores are offered in a wide range of sizes, so you can find something to fit everything from a Snub-nosed revolver to a 32″-barrelled 50 BMG. Rifle-size Bore Stores can be purchased for $14.99 – $23.00 from Amazon.com. For long F-Class or tactical rifles, we recommend the 10″x52″ SSG Scoped Shotgun Bag. You can also order direct from the Bore-Store manufacturer, Big Spring Enterprises, www.BoreStores.com. Big Spring will also craft custom sizes on request.
Lyman’s new Bleacher Block stepped cartridge holders are great. Use the different levels for sorting brass. Or, migrate the brass from top to bottom as you proceed through case prep stages. Made of durable polymer, Bleacher Blocks are molded in three sizes. The smallest size (with 0.388″-diam holes) fits .223 Rem-size case heads. The middle size (with 0.485″-diam holes) fits .308 Win-size case heads. The biggest Bleacher Block has 0.565″-diameter recesses for magnum-size cases. All three cartridge block sizes hold fifty (50) rounds. Purchase any size for just $6.14 per Block at Midsouth.
Think you need a relatively long case-neck for good accuracy? Think again. Stan Ware broke all the rules with his radical Wolfpup cartridge, proving that a near-no-neck design can deliver match-winning accuracy. Read on to learn how the Wolfpup works…
Retired gunsmith Stan Ware is a talented shooter who’s not afraid to think “outside the box”. Stan competes in both Hunter Benchrest (HBR) and Varmint for Score (VFS) disciplines. In his quest to build the ultimate Hunter Benchrest cartridge, Stan created the radical “Wolfpup” wildcat, based on a 6mmBR parent case. Noting the dominance of 30 BRs in VFS matches, Stan wondered if a stretched 30 BR could work in HBR competition. The challenge was case capacity. Under HBR rules the cartridge must hold at least 45.0 grains of water, equal to the capacity of the classic 30/30 case.
To get the requisite HBR case capacity, Stan figured he needed to boost the volume of a 30 BR case significantly, so he would have to move the shoulder forward — a lot. He did this by running a 30 BR reamer deeper and deeper, test-firing brass along the way. After three reamer passes, he ended up with the capacity he needed (the Wolfpup holds 45.3 grains of water). But then he looked at the finished product — a case with almost no neck, and he wondered “how could this possibly work?”.
From Trashbin to Winner’s Circle
Ware’s prototype Wolfpup ended up so short-necked, so unlike any “normal” cartridge, that Stan figured it was “dead on arrival”. Stan told us: “I said ‘this ain’t going to work’ and I threw the brass in the trash can. Honest. But later I thought I better shoot it and see what it does.” There was one problem — Stan didn’t have a seating die. He noticed the short neck provided a bit of tension after fire-forming, so he literally seated some bullets, BIB 118s and 125s, with his fingers. For powder he used H4198 and started with 35 grains, one grain more than a 30 BR load. Stan then did a pressure work-up: “I actually went up to 41.0 grains and didn’t have a sticky bolt. I ended up at 37.9 grains of Hodgdon 4198 — that gave 3150 fps, where the sweet spot is.” (Later testing revealed a second accuracy node at about 3020 fps, using 36.4 grains of H4198).
Stan’s radical short-necked Wolfpup shot great from the get-go. Once he found the right velocity node, the gun shot in the ones and zeros with both 7-ogive and 10-ogive bullets, both 118s and 125s. The Wolfpup proved easy to tune — it’s not finicky at all. And it’s a winner. Stan began shooting the Wolfpup in 2006 in both VFS and HBR matches and the ‘Pup’ started winning matches right away. In 2007, Stan won the Wisconsin State VFS Championship shooting the Wolfpup. In June 2010 at a Webster City, Iowa VFS match, Stan won the Grand Agg and posted high X-Count for the match, while placing first at 100 yards and second at 200 yards. How’s that for a cartridge that almost ended up in the trash bin?
Does Stan deserve an award for “most innovative benchrest cartridge design”? Stan chuckles at that notion: “I’m not a hero, not a genius. I really didn’t do anything. The fun part is thinking outside the box — for me anyway. Shooting is an age-old process of experimentation. You never learn it all.”
Why Does It Work?
How can such a radical case design perform so well? “That’s a good question,” Stan admitted. He then explained: “The 30 BR is inherently accurate, so I figured something based on the 30 BR should be accurate too. My personal belief is that the short neck doesn’t hurt you. Plus if the throat in the barrel is straight, the bullet can self-align. If the chamber is good, the bullet will self-center in the throat. In a regular case there’s not much room to do that, so a bullet can start off-center, and you don’t get the same results every time. A bullet in a conventional case is stopped from self-centering by the stiffer neck, particularly in a tight-clearance BR gun.”
Reloading the .30 Wolfpup
Stan’s Wolfpup chamber has a neck dimension of 0.330″. He turns his necks for a 0.327″ loaded round. Bullets are jammed .020″ forward of first contact with the lands. When he closes the bolt it pushes the bullet back in the case — almost a soft seat. Stan notes: “To start with I normally bump the shoulder .0005-.001″ so they go in easy. Just by doing that I get a little neck tension. I also use a bushing. Right now I’m running a .322, but it’s not particularly sensitive. I’ve tried one-thousandths increments up to a .325 bushing and couldn’t tell a lot of difference.” For bullet seating, Stan uses a Wilson 30 BR seater die into which he ran the chamber reamer. This gives perfect case fit during seating operations.
About the Illustrated Gunstock
You’ll notice Stan’s stock contains scenes from Vietnam and a quotation. Here’s the story. A Vietnam combat veteran, Stan served “in-country” with the Army’s 509th Non-Divisional Combat Unit (out of Fort Riley) from 1965-1966. Shortly before he left Vietnam, Stan went to a shop to have a souvenir lighter engraved. He asked the vendor for an appropriate inscription. The shop’s metal-worker engraved: “War is a tragedy. It takes mans’ best to do mans’ worst.” That message, along with the combat scenes, were hand-painted on Stan’s rifle by his wife Susan, a talented artist. She spent more than 20 hours painting the rifle stock.
At the request of our readers, we provide select “Deals of the Week”. Every Monday morning we offer our Best Bargain selections. Here are some of the best deals on firearms, hardware, reloading components, optics, and shooting accessories. Be aware that sale prices are subject to change, and once clearance inventory is sold, it’s gone for good. You snooze you lose.
1. CDNN — Browning A-Bolt III Composite Stalker, $349.99 NET
Hunting season is coming soon. Here’s a rifle with a smooth three-lug action and good trigger that can take any game in North America. The Browning A-Bolt III is justifiably respected as a solid hunting rifle. This AB3 Composite Stalker model, with a synthetic stock blued barreled action, normally retails for $600.00+. Now it’s on sale for under $449.99. What’s more, Browning is currently offering a $100.00 Browning Bucks Rebate for any Browning firearm purchased before September 30, 2017. That drops your net cost for this hunting rifle to just $349.99.
Chose your favorite short-action or long-action cartridge. Available chamberings at this price include: .243 Win, 6.5 Creedmoor, .270 Win, 7mm-08, 7mm Rem Mag, .308 Win, .300 WSM, .30-06 Sprg, 300 Win Mag. The .270 Win and .30-06 versions are also available with Realtree Xtra Camo (above) for the same $349.99 after-rebate price.
2. Natchez — Leupold VX-6 Scopes Closeout, Save Hundreds
Looking for a good scope for your hunting rifle? Natchez Shooters Supplies is running a big sale on Leupold VX-6 scopes. You can save hundreds of dollars on a wide variety of VX-6 optics, from 1-6x24mm up to 3-18x50mm models. If you are looking for a high-quality hunting optic at a great price check out these deals. For example, Leupold’s 2-12x42mm Illum. FireDot LR Duplex model is marked down from $1039.50 to just $749.99 — a 28% savings! Shown above are four hot deals, but a dozen Leupold VX-6 models on are sale now.
3. Bruno’s — Big Labor Day Sale on (Nearly) Everything In Stock
Celebrate Labor Day with big savings. Bullets, brass, powder, optics, dies, tools, stocks, barrels, actions — all this and more is on sale at Bruno Shooters Supply right now. You’ll find savings on pretty much everything Bruno’s sells (except MAP-price items). But you have to act quickly. This storewide sale ends tomorrow, 9/5/2017 at 11:59 PM. You snooze, you loose. NOTE: You don’t need a special discount code — the sale prices are already shown online. This Sale runs through Tuesday, September 5 at 11:59 PM MST. No Back-orders with sale pricing.
4. Midway USA — Camo Tuesday Sales on Hunting Gear
This year, MidwayUSA’s 6th Annual Camo Tuesday™ will feature deep discounts on select MidwayUSA hunting clothing, footwear, ammunition, optics and more from brands like Irish Setter, Federal, and Vortex just to name a few. “Camo Tuesday [is] Black Friday for the hunter and marks the first official shopping day of the fall hunting season,” said Jeff Larkin, VP Marketing. “This year’s Camo Tuesday event … will be bigger and better than ever with some really great products from top brands at unbelievable prices!” Head over to MidwayUSA.com on September 5th to take advantage of the great deals. You can also enter the 2017 Camo Tuesday Sweepstakes with a Hunting Clothing Package prize.
5. Amazon — Sig Kilo 1250 Rangefinder, $199.99
Hunting season is coming soon. That means going through your gear check-list before you head to deer country. If you don’t have a quality, compact Laser Rangefinder, here’s a great deal. The 6x20mm SIG Kilo 1250 Camo Rangefinder is now on sale for under $200.00. This is a very accurate LRF, that ranges deer-sized targets at long distances quickly. The scan mode is very fast (4X per second) and this offers both line of sight (LOS) or angle modified range (AMR). The unit is compact and light — a bonus for hunters. There are more expensive Laser Rangefinder that can range farther, but this $199.99 Kilo 1250 will definitely do the job on a hunting trip for one-third the price.
6. Midsouth — All Hazmat Fees Reduced to $19.99 (up to 50 lbs.)
UPDATE: Midsouth Has Extended this offer through Saturday, Sept. 9, 2017 at 11:59 PM!
Some online vendors bill up to $40.00 per shipment for Hazardous Materials Charges, the notorious “HAZMAT FEE”. As a Labor Day weekend special, Midsouth has reduced its Hazmat Fee to just $19.99 per shipment, for any combination of powders and primers up to 50 pounds in weight. And yes, you can combine powder and primers in the same order, to ship both with one $19.99 hazmat fee. Right now is a good time to buy. Midsouth has a good selection of most popular powders (though Hodgdon H4350 and Alliant Reloder 16 are still back-ordered).
7. Powder Valley — $10 Off $100 Orders (with eMail Sign-Up)
Save ten bucks on your next powder order from Powder Valley Inc., one of the most respected vendors of powder, primers, bullets, and brass in the businesses. Simply subscribe to Powder Valley’s newsletter to earn your $10 Savings. As a subscriber, you’ll get timely tips on sales, and product arrivals — such as the latest shipment of Lapua 6.5 Creedmoor brass. Powder Valley has long had some of the most competitive pricing on reloading components.
8. Amazon — Motion-Sensitive Interior Light for Gun Safes, $9.95
Let there be light. Here’s a great accessory for your Gun Safe. This “smart” LED lamp turns itself on when you open the door, and off when you close the door. There’s a built-in magnet so you can easily attach the light to the inner walls or “ceiling” of your gun safe. It works, it’s handy, and it’s inexpensive — just $9.99 with free shipping for Prime members (or otherwise free shipping for $25+ orders). We bought two for our own firearms vault. This can provide 14 hours of light with three AA batteries (not included). Very versatile, these motion-sensor lamps can also be used in closets.
9. Amazon — Mystery Deal of the Week, 30% Off Normal Price
We’re adding something new to our Weekly Bargain Round-Up — a Mystery Deal of the Week. This will be a high-quality item that has 4+ star user reviews, and is selling at least 25% off the normal price. The item this week is under $100.00 and is an outstanding value. It works as well as competitive products costing $220 or more. HINT: This Mystery Deal item will be handy for all rifle shooters traveling to and from a range. Above is a recent price chart. You can see this is a super value right now. CLICK HERE to see the Mystery Deal.
How do you trim your cases? We use a variety of tools, including power case trimmers. But our go-to trimmer for Benchrest-type cartridges is the L.E. Wilson Trimmer unit, now available in a handsome and durable stainless assembly. This thing is slick. It trims very precisely with the use of Wilson case holders combined with a micrometer-type stop for length control. As sold complete with micrometer, quick clamp, and metal stand, this new Wilson Stainless Trimmer is $139.95 at Creedmoor Sports. We think that’s a fair price for a unit that can last a lifetime, trimming many thousands of cases.
In this video, Bill Gravatt demonstrates the new Stainless Wilson trimmer. Gravatt offers some smart tips so this video is worth watching even if you’ve used a Wilson trimmer before:
Tips for Trimming with Wilson SS Micrometer Trimmer:
1. After inserting brass in the case holder, tap the case lightly to ensure it seats fully.
2. When starting your case-trimming session, do one or two test cases to check cut length. Adjust length with micrometer, then test length again. If “good to go”, set length stop. NOTE: Release the Stop Screw to make major adjustments. Use the Micrometer to make fine adjustments, in .001″ increments.
3. After trimming operations, be sure to chamfer case mouth after cutting to remove burrs. NOTE: After you have made the chamfer, we recommend gently spinning the chamfer tool backwards a couple times in the case neck. This will burnish/smooth the newly-cut champing, which helps with bullet seating.
Features of Deluxe Wilson Stainless Case Trimmer with Micrometer
— Long lasting Stainless finish with Micrometer adjustment.
— New 304 Stainless Steel Handle included with Micrometer Trimmer.
— Rotary-style clamp swings to secure case-holder — quick and easy.
— Larger stop screw adjustment from 3/8″ (old) to 1/2″ (new) with increased width on stop nut. Coated with black oxide for a long lasting durable finish.
— Made in the USA with American Steel.
— Power Adaptor compatible.
A while back, John Seibel, creator of the Varmints for Fun website, put together a 6-6.5×47 Varminter with a Lilja 10-twist barrel and BAT RBRP three-lug action. Richard Franklin smithed the gun using a Model 10 Varminter stock, one of Richard’s own stock designs.
Varmint Loads with 75gr and 87gr V-Maxs
Our Forum readers have asked for recommended 6-6.5×47 Lapua loads for the lighter bullets. Well, John has some useful load data that should provide excellent starting points for 75gr and 87gr projectiles. John writes: “The 75s and 87s will be my main groundpig/varmint rounds. I have worked up loads for all of them but I need to work on the 95s to fine tune them for the egg shoot. I used CCI 450 primers for all loads. They have shown to reduce ES greatly. This case has a small primer pocket and I reasoned with the slower burning powders I wanted to get my velocity as high as possible. I had plenty of H414 and N550 … so that’s what I tried. Velocities and case fullness seemed to be pretty dang good.”
John favored Vihtavuori N550 for the 75 V-Max, while H414 was his powder of choice for the 87gr V-Max. John found these two powders offered near 100% fill density. There are other good powder choices for these bullets. For pure accuracy, you may want to try the 80gr Berger Varmint bullet — it has shot superbly in our 6BRs.
Many novice hand-loaders believe that neck bushing Inside Diameter (ID) size is the only important factor in neck tension. In fact, many different things will influence the grip on your bullet and its ability to release from the case neck. To learn the ins and outs of neck tension, take some time and read this article carefully.
Neck Tension (i.e. Grip on Bullets) Is a Complex Phenomenon
While we certainly have considerable control over neck tension by using tighter or looser bushings (with smaller or bigger Inside Diameters), bushing size is only one factor at work. It’s important to understand the multiple factors that can increase or decrease the resistance to bullet release. Think in terms of overall brass-on-bullet “grip” instead of just bushing size (or the internal neck diameter in non-bushing FL dies).
Bullet grip is affected by many things, such as:
1. Neck-wall thickness.
2. Amount of bullet bearing surface (shank) in the neck.
3. Surface condition inside of neck (residual carbon can act as a lubricant; ultrasonic cleaning makes necks “grabby”).
4. Length of neck (e.g. 6mmBR neck vs. 6mm Dasher).
5. Whether or not the bullets have an anti-friction coating.
6.The springiness of the brass (which is related to degree of work-hardening; number of firings etc.)
7. The bullet jacket material.
8. The outside diameter of the bullet and whether it has a pressure ridge.
9. Time duration between bullet seating and firing (necks can stiffen with time).
10. How often the brass is annealed.
11. Amount (length) of neck sized (e.g. you can size only half the neck).
12. Interior diameter of bushing, or neck section of non-bushing die.
— and there are others…
One needs to understand that bushing size isn’t the beginning and end of neck tension questions, because, even if bushing size is held constant, the amount of bullet “grip” can change dramatically as the condition of your brass changes. Bullet “grip” can also change if you alter your seating depth, and it can even change if you ultrasonically clean your cases.
In our Shooters’ Forum a reader recently asked: “How much neck tension should I use?” This prompted a Forum discussion in which other Forum members recommended a specific number based on their experience, such as .001″, .002″, or .003″. These numbers, as commonly used, correspond to the difference between case-neck OD after sizing and the neck OD of a loaded round, with bullet in place. In other words, the numbers refer to the nominal amount of interference fit (after sizing).
While these commonly-used “tension numbers” (of .001″, .002″ etc.) can be useful as starting points, neck tension is actually a fairly complex subject. The actual amount of “grip” on the bullet is a function of many factors, of which neck-OD reduction during sizing is just one. Understanding these many factors will help you maintain consistent neck tension as your brass “evolves” over the course of multiple reloadings.
Seating Depth Changes Can Increase or Decrease Grip on Bullet
You can do this simple experiment. Seat a boat-tail bullet in your sized neck with .150″ of bearing surface (shank) in the neck. Now remove the bullet with an impact hammer. Next, take another identical bullet and seat it with .300″ of bearing surface in another sized case (same bushing size/same nominal tension). You’ll find the deeper-seated bullet is gripped much harder.
Neck-Wall Thickness is Important Too
I have also found that thinner necks, particularly the very thin necks used by many PPC shooters, require more sizing to give equivalent “grip”. Again, do your own experiment. Seat a bullet in a case turned to .008″ neckwall thickness and sized down .003″. Now compare that to a case with .014″ neckwall thickness and sized down .0015″. You may find that the bullet in the thin necks actually pulls out easier, though it supposedly has more “neck tension”, if one were to consider bushing size alone.
In practical terms, because thick necks are less elastic than very thin necks, when you turn necks you may need to run tighter bushings to maintain the same amount of actual grip on the bullets (as compared to no-turn brass). Consequently, I suspect the guys using .0015″ “tension” on no-turn brass may be a lot closer to the guys using .003″ “tension” on turned necks than either group may realize.
Toward a Better Definition of Neck Tension
As a convenient short-cut, we tend to describe neck tension by bushing size alone. When a guy says, “I run .002 neck tension”, that normally means he is using a die/bushing that sizes the necks .002″ smaller than a loaded round. Well we know something about his post-sizing neck OD, but do we really have a reliable idea about how much force is required to release his bullets? Maybe not… This use of the term “neck tension” when we are really only describing the amount of neck diameter reduction with a die/bushing is really kind of incomplete.
My point here is that it is overly simplistic to ask, “should I load with .001 tension or .003?” In reality, an .001″ reduction (after springback) on a thick neck might provide MORE “grip” on a deep-seated bullet than an .003″ reduction on a very thin-walled neck holding a bullet with minimal bearing surface in the neck. Bushing ID is something we can easily measure and verify. We use bushing size as a descriptor of neck tension because it is convenient and because the other important factors are hard to quantify. But those factors shouldn’t be ignored if you want to maintain consistent neck tension for optimal accuracy.
Consistency and accuracy — that’s really what this all about isn’t it? We want to find the best neck tension for accuracy, and then maintain that amount of grip-on-bullet over time. To do that you need to look not only at your bushing size, but also at how your brass has changed (work-hardened) with time, and whether other variables (such as the amount of carbon in the neck) have changed. Ultimately, optimal neck tension must be ascertained experimentally. You have to go out and test empirically to see what works, in YOUR rifle, with YOUR bullets and YOUR brass. And you may have to change the nominal tension setting (i.e. bushing size) as your brass work-hardens or IF YOU CHANGE SEATING DEPTHS.
Remember that bushing size alone does not tell us all we need to know about the neck’s true “holding power” on a bullet, or the energy required for bullet release. True bullet grip is a more complicated phenomenon, one that is affected by numerous factors, some of which are very hard to quantify.
Breech-Lock System Allows Fast Die Exchanges
Retired gunsmith Stan Ware is a talented shooter who’s not afraid to think “outside the box”. Stan competes in both Hunter Benchrest (HBR) and Varmint for Score (VFS) disciplines. In his quest to build the ultimate Hunter Benchrest cartridge, Stan created the radical “Wolfpup” wildcat, based on a 6mmBR parent case. Noting the dominance of 30 BRs in VFS matches, Stan wondered if a stretched 30 BR could work in HBR competition. The challenge was case capacity. Under HBR rules the cartridge must hold at least 45.0 grains of water, equal to the capacity of the classic 30/30 case.
From Trashbin to Winner’s Circle
Why Does It Work?
Varmint Loads with 75gr and 87gr V-Maxs
In our 
Neck-Wall Thickness is Important Too
