|
|
January 14th, 2014
There were many big tactical rifles on display at Media Day, none bigger than the .50 BMG Barrett m107a1. This beast also sported the largest suppressor we’ve ever seen, a “can” the size of a motorcycle exhaust. Called the “QDL” for “Quick Detach Large”, this suppressor fits over the regular muzzle brake. It is capable of reducing the m107a1’s report from 175 db to 158 db. We learned that the m107a1 has been made “leaner and meaner” for 2014, with a six-pound weight savings. That’s important to soldiers charged with carrying the big rig in the field. Watch the last half of the video below to learn about the upgraded m107a1 and the big new QDL suppressor.
Along with the m107a1, Barrett showed us the new MRAD (Multi-Role Adaptive Design), a modular rifle that can shoot .308 Win (7.62×51), .300 Win Magnum, and .338 Lapua Magnum. The MRAD’s design allows the operator to swap barrels and change bolt-heads quickly and easily with simple tools. In fact, you can even remove the trigger group in less than a minute, just by flipping up the MRAD’s hinged upper and pushing out the safety cross-pin (3:00 minute mark in video). The MRAD dis-assembly procedure is shown in the video below. The MRAD is a very well-thought-out design, and it shot very well when Jason tested it. At least in .308 Win configuration, the braked MRAD has good manners on bipod. It doesn’t hop or roll, but recoils straight back, making it very easy to get back on target.
Share the post "Big Barretts Shed Weight for 2014 — M107a1 and MRAD"
September 17th, 2013
 Barrett offers an innovative scope ring set that adjusts to two different MOA elevations through the use of variable-position cross-pins in the rear ring. Barrett’s Pin-Lock® ExRings allow a dual-setting +MOA taper by placing the adjustment pin in one of two locations. To change settings, simply remove the rear pin from one hole and insert it into the other (after loosening side locking bolts*). There are multiple ExRing versions: 30mm with 15/40 MOA settings (#66850), 30mm with 20/30 MOA settings (#66858), and 34mm with 20/30 MOA settings (#66870).
Barrett says the lower 15 or 20 MOA settings are commonly used with canted rails while the higher 30 or 40 MOA settings are for flat rails. Once an elevation setting is selected and the ring’s cross bolts are torqued to specification, Barrett ExRings become a rock-solid mount with the MOA “pre-load” angle best suited to your application. NOTE: Rings come factory preset at the lower MOA setting. CLICK HERE for Barrett ExRing Mounting Instructions (PDF).
These rings are ideal for extreme long-range shooting, offering a huge amount of elevation “pre-load” that allows the shooter to keep his scope in the middle of its elevation range. We’re not aware of any other ring system that allows a quick, repeatable change from 15 MOA preload to 40 MOA (and vice versa), or even from 20 to 30 MOA. The system will work with a wide variety of installations. ExRings will work on both flat and tapered m1913 Picatinny-type rails, and there should be enough clearance for scopes with front objectives up to 70mm in diameter. ExRings are made from tough, T-6 aluminum, hard-anodized to 60 HRC specs. A special “Zero-Gap” clamping system provides a very secure mount.
| Barrett ExRings® (Extended Range Scope Rings) Key Features:
• Maximizes the riflescope’s internal elevation adjustment.
• ZERO-GAP offers wider clamping area and maximizes “scope grip”.
• ZERO BACKLASH tongue and groove interface.
• High Strength Aircraft-grade 7075 T6 aluminum.
• 2.5 times lighter than steel.
• Heat-treated steel cross bolt and captured nut for increased strength.
• Hard Anodized with a 60 HRC (Rockwell C scale).
• Both 30mm diameter and 34mm diameter available.
• BORS compatible.
|
|
ExRings Prove Themselves in Long-Range Competition
You’ll find an extensive review of the Barrett ExRings on Australian Long Range Shooter Magazine. The creator of that website, Norm Nelson, mounted Barrett Pin-Lock 15-40 MOA adjustable rings on his 7mm F-Open rig. He then proceeded to use that rifle (with ExRings) to win the 2013 Australian Long-Range Championship. Here are Norm’s comments:
 “I used [the ExRings] to great effect to win the Australian Long Range F-Class Open competition earlier this year. They enabled me to use a higher magnification scope at the 1200-yard range. I have since bought a second pair and run them on my .375 Cheytac to shoot way out yonder.
The operation and fitting of these rings is quite easy and they provide a strong mounting solution for long range rifles that need an extra bit of elevation. Once mounted to the rail the ring top halves are removed and the side locking plates are loosened. At this time the rear adjustable adjustable pin can be removed if desired and placed into either [MOA position].
These are solid rings designed to withstand the recoil of the big Barrett rifles. In the testing I have done so far, I have not noticed any movement of these rings and would be surprised if I did given their build design and quality.”
*HOW to CHANGE ExRing MOA SETTINGS
Barrett recommends changing the MOA setting after scope is installed on rifle.
1. Remove the two side locking bolts from the rear ring and loosen the two side locking bolts from the front ring using the T27 Torx® end of the supplied L-wrench.
2. Use a 1/8″ pin punch to remove the adjustment pin from the rear ring.
3. Align the corresponding pin hole locations, insert and tap the adjustment pin flush using a pin punch.
4. Tighten all four side locking bolts to 50 inch/lbs or 5.6Nm
Share the post "Pin-Adjustable Barrett ExRings Offer Two MOA Elevation Settings"
July 15th, 2013
 Are you a skilled gunsmith looking for a salaried position? Here’s an opportunity to work for a great company with solid financials and state-of-the-art machining equipment. Barrett is seeking a Master Gunsmith for precision rifles. The selected candidate must possess the knowledge and skills necessary to independently construct, document, and deliver precise (< 0.5 MOA) long rifles while using parameters set forth by the company. The selected candidate will be considered the authority in regards to identifying critical features that result in a precision long rifle. Specific job and experience requirements are listed below. Barrett is headquartered in Murfreesboro, TN. CLICK HERE for more information.
Job Requirements:
- Reputable Gunsmith Certification
- (7) years experience constructing highly precise and robust (<.5 MOA) long rifles
- Examples of successful long rifle constructions
- (3) years manual lathe and mill experience
- (3) years competitive shooting in a precision long rifle class
- (2) years CAD/CAM (SolidWorks preferred) experience
- Understanding of precision critical barrel and ammunition features
- Understanding of internal and external ballistics
- Ability to work closely with engineers
- Excellent communication skills
- MS Office (Word, Excel, Project) experience
M107 on duty in Afghanistan with Company F, 2nd Aviation Assault Battalion, 82nd Combat Aviation Brigade’s Pathfinders. U.S. Army photo by Spc. Cody Barber, 11th PAD.
Job find by EdLongrange. We welcome reader submissions.
Share the post "Barrett Seeks Master Gunsmith for Precision Rifles"
October 30th, 2011
If you’ve been lusting for a serious, ultra-long-range big-bore tactical rifle, check out this special offer from Barrett Firearms. Purchase any Model 82A1 chambered for the .416 Barrett and get 200 rounds of ammunition from Barrett as a free extra. That’s right, get 200 rounds of .416 Barrett ammunition FREE with your purchase of any configuration Model 82A1 .416 rifle. The retail cost of 200 rounds of Barrett-Brand .416 ammo exceeds $1000.00.* That’s a nice incentive, but remember that a Barrett Model 82A1 rifle costs a jaw-dropping $8,900.00 without optics. CLICK HERE for Barrett Price List (PDF).
If you can afford it, the Model 82A1 in .416 Barrett is a great ultra-long range performer. The chambering is also legal in jurisdictions that ban the .50 BMG or other .50-caliber cartridges. To qualify for this free ammo deal, head to your local dealer and ask them to use Promo Code FILL20MAGS when purchasing directly from Barrett. That will entitle you to 200 rounds of .416 Barrett ammunition, with your new rifle. That ammo’s worth over a thousand bucks. Take a look at the size of the cartridge, and you’ll understand why .416 Barrett ammo is so pricey.
*Barrett Brand .416 Barrett Ammunition: Item 41622 Hornady® 450gr BTHP, 10-Round Box, $60.00; Item 12770, Hornady 450gr BTHP, 100-Round Case, $590.00.
Share the post "$1K Worth of Free Ammo with Purchase of .416 Barrett M82A1"
September 19th, 2011
Last week, at the DSEi trade show in London, UK, Sako unveiled an all-new tactical rifle, designed from the ground up as a modular system, which can be user-configured in the field to shoot multiple calibers. By changing bolts and barrels, Sako’s new TRG M10 can be switched from a 7.62×51 NATO round to the .300 Win Mag, or the even larger .338 Lapua Magnum. With the capability of the TRG M10 to shoot both standard and magnum cartridges, Sako now has a product that can compete with other multi-caliber sniper rifles such as the Barrett MRAD, released last year. CLICK HERE for TRG M10 Spec Sheet.
 Sako Breaks TRG Mold with New M10
The TRG M10 represents quite a departure from Sako’s current TRG models which use a composite shell over a metal chassis which holds the barreled action. There is no outer shell or “skin” on the TRG M10. The action bolts into a rigid, exposed metal chassis to which a rail-equipped metal forearm/handguard is attached. Bipods can mount directly to a bottom Picatinny-style rail or to a metal block clamped to the rail on the underside of the forearm (See Photos).
TRG M10 Previewed in London
CLICK HERE to view more photos of the new TRG M10. These images, taken at DSEi in London, show the rifle both fully assembled as well as pulled apart into its major sections: action/barrel, folding stock, forearm, bolt assemblies, magazines. As the TRG M10 is designed to shoot multiple calibers, it employs two different bolt assemblies to fit both standard and magnum cases (of course this requires a barrel interchange as well).
For Military and Law Enforcement Only — for Now
Currently, the TRG M10 is marketed for “military and law enforcement only.” It will be interesting to see if Sako eventually decides to sell the TRG M10 to American civilian shooters. If Sako changes its mind about the civilian market, we would not be surprised if an announcement to that effect would be made at SHOT Show 2012 (to be held Las Vegas, NV, January 17-20, 2012). The TRG M10 system will next be displayed at the Milipol trade show in Paris, France on October 18-21, 2011.
There is an extensive discussion of the new Sako TRG M10 on the Snipers’ Hide Forum. Overall, the initial reaction of ‘Hide members has been positive. Quite a few of those who commented on the rifle stated they would purchase a TRG M10 if it was offered to civilians. Hopefully Beretta, Sako’s parent company, will recognize that popular demand for the TRG M10 would be sufficient to justify its release to the civilian market. Only time will tell….
Share the post "SAKO Introduces TRG M10 — New Modular Tactical Rifle"
June 25th, 2011
 This Monday, June 27, at 9:00 pm, Barrett Firearms Mfg. will be featured on a National Geographic special entitled Snipers, Inc.. The hour-long show tells the story of Ronnie Barrett, his innovative large-caliber sniper rifle designs, and how he built a multi-million dollar business. Barrett Firearms introduced the semi-automatic .50-Cal M82 in 1982 but did not make any significant sales until 1989. Soon afterward, the M82 was purchased by the United States armed forces, and it was deployed in the Gulf War. Today the company has contracts with dozens of countries to supply sniper rifles. The success of the M82A1 has spawned several other models of .50 BMG rifles, including the M95, M99, and M99-1. These are lighter, lower-cost bolt-action rifles. One of the most recent offerings from Barret is the M107A1, unveiled in January 2011. M107A1 enhancements include a 4-lb weight reduction, increased accuracy, and a quick attachment for a Barrett suppressor.
The Nat Geo promo states: “Selling guns to snipers is all in a day’s work for one small-town Tennessee family. Ronnie, the designer and businessman at the helm of Barrett Firearms Manufacturing, and his two children, are responsible for creating the M107 sniper rifle. The M107’s power and precision allow snipers to destroy multiple targets from more than 20 football fields away. NGC goes inside this family of firearm ‘rock stars’.” In the video below, Ronnie Barrett talks about the M107A1 and the new multi-caliber MRAD rifle system. (It’s an interesting Nat Geo video, well worth watching.)
CLICK on video to start playback
Share the post "Nat Geo Spotlights Ronnie Barrett and His Innovative Rifles"
January 18th, 2011
Media Day at the Boulder City, Nevada range was a blast — literally. We had a chance to sample some big .338 Lapua Magnum rifles from Barrett and Sako. The recoil on the Sako TRG42 was epic, as it lacked a muzzle brake, and the front sandbag did nothing to tame rearward movement. We’ll provide more info on the TRG42 (and its new folding stock) later this week.
New Tikka T3 Sporter — Master Sporter Reborn
Tikka unveiled an interesting new T3 Sporter, fitted out in a handsome laminated position stock. This seems to be the successor to Tikka’s popular (but long since discontinued) Master Sporter series. We only hope Beretta, Tikka’s parent company, will eventually offer a wider selection of calibers — right now Beretta only plans to sell .223 Rem and 22-250 versions in the USA.
New Tikka T3 Sporter
MRAD is Impressive — and Brutally Expensive
Barrett’s new MRAD “adaptible” rifle was an impressive beast — as it should be at $6000.00 per unit. It did display some very clever engineering that allows a user to switch barrels and even change calibers with no gunsmithing. Check out the video for a review of the many unique features of the MRAD.
Crosman’s Computer-Controlled Airgun
Perhaps the most innovative (or at least technologically advanced) rifle on display wasn’t officially a “firearm” at all. Crosman’s new Benjamin Rogue, pneumatic varmint rifle actually has a microprocessor-controlled “fire control” system. Yes this state-of-the-art airgun actually has an internal computer that monitors the available air pressure, and sets the output level according to the bullet weight and desired velocity. This is no Daisy B-B gun — the Rogue is big and bulky. But it also delivers the hitting power of a 38 Special, all without a single kernel of gunpowder. Crosman’s Rogue will launch a 145gr polymer-tipped Nosler bullet at 850 fps. Just run the numbers and you’ll find the Rogue delivers as much terminal energy as many centerfire pistol cartridges.
Polymer Cartridge Casings from PCP
A Florida-based company, PCP Ammunition, unveiled a truly revolutionary product — polymer-cased ammo. The “cartridges” have a metal rim/base section (like shotgun shells) but nearly all the cartridge body is a tan-colored high-strength polymer. No, this product won’t do reloders much good, but it could be a huge “hit” with the military, as a polymer case is at least 25% lighter than brass. PCP Reps claimed that PCP’s plastic-bodied ammo can withstand loads that would be considered “full presure” in conventional brass. Stay tuned for further updates.
Share the post "MEDIA Day — Some Interesting New Products"
February 22nd, 2010
We had fun testing the new Barrett Model 98B (Ninety-Eight Bravo) at Media Day before SHOT Show last month. In the video below, Jason shoots a 98B, after trying its bigger brother, the Barrett model 82A1. The new 98B, chambered in .338 Lapua, has some very nice features and it certainly is a sturdy beast. We predicted this gun would be popular, and attract considerable media attention.
That prediction was right on. Barrett’s 98B rifle in .338 Lapua Magnum has been named the American Rifleman magazine “Rifle of the Year”, earning a coveted Golden Bullseye® Award. This year the Barrett Model 98B was selected by a seven-member committee who considered a variety of factors including reliability, accuracy, design innovation, styling, and “perceived value” to the purchaser. As the “Rifle of the Year”, the 98B was chosen over other recently introduced long-gun offerings from major manufacturers.
Barrett will be presented with the Golden Bullseye Award for 2010’s Rifle of the Year at the 2010 NRA Annual Meeting and Exhibits in Charlotte, North Carolina. There Barrett CEO and founder Ronnie Barrett will also be personally honored as the NRA’s 2010 Golden Bullseye Pioneer Award winner. In addition, the Barrett Model 98B will be featured in the NRA’s print magazines, in the May issue of American Rifleman and American Hunter®, and the June issue of Shooting Illustrated.
In the video below, Barrett engineers explain the technical features of the Model 98B and show how to field-strip the rifle.
Share the post "Barrett 98B in .338 Lapua Named "Rifle of the Year""
|
