Taran Butler, Bruce Piatt and Jerry Miculek claimed national titles at the U.S. Practical Shooting Association (USPSA) Multi-Gun Championships held October 3-5 at the Shootout Range in Princeton, Louisiana. The match drew nearly 120 competitors from 28 states. In Multi-Gun matches, shooters tackle multiple, timed stages, using pistol, rifle and shotgun to engage a variety of paper, steel and moving targets. Matches often require competitors to use all three types of firearms on a single stage. Showcasing remarkable shooter skills (and fast reflexes), Multi-Gun (i.e. “3-Gun”) matches are exciting to watch. Below is a video of USAMU team members at the 2007 USPSA Multi-Gun Nationals:
Nat’l Championship Results
In the Tactical Division, Taran Butler of Simi Valley, California dominated the match, winning five of the 12 stages and leading in overall points on eight. In the end his overall score of 1279.9417 outpaced second place shooter and fellow Golden State resident Keith Garcia of San Ramon by almost 77 points. Butler previously won the Tactical Division in 2006.
Team Smith & Wesson member Jerry Miculek, shooting on his home range, defended his 2007 win by again taking the Open Division title, this time by more than 24 points with a final score of 1278.0090. Miculek won five of the 12 stages and led the field over nine of them. Great Shooting Jerry! Chris Tilley finished second in the Open Division with a score of 1253.6155 edging out the 2006 champion Michael Voigt of Chino, California by just over two points. The Limited Division title went to Bruce Piatt of Montvale, New Jersey, who won by more than 41 points with a final score of 1302.0291. Piatt held the lead on eight stages winning three of them.
About USPSA: The United States Practical Shooting Association is a non-profit membership association and the governing body for the sport of Practical Shooting in America. USPSA has over 17,000 members and more than 350 affiliated clubs. Visit www.uspsa.org.
Share the post "USPSA Multi-Gun National Championships"
Sierra has a new 155gr Palma bullet, and it’s a winner. The new 155gr MatchKing bullet, featuring a longer ogive and factory-pointed meplats, was used by Team USA at the recent Spirit of America match. According to many team shooters and coach Emil Praslick III, the new bullet helped the American team achieve an impressive victory over arch-rival England and other national squads.
Matt Reams of Sierra Bullets confirmed that the new bullet, Sierra part # 2156, will shortly enter full-scale production. Sierra is planning a late-December 2008 release date, but Matt says “first week of 2009 should be a safe bet.” The bullets will be priced “roughly 5% higher than current Sierra 155gr MatchKings”, according to Matt.
Sierra worked closely with Team USA on the design of the new bullet. Dennis Flaharty, USA Palma Captain, tells us: “We worked very closely with the people at Sierra and they really came up with a winner. We tested several prototypes before we settled on this one. Each one better than the next. This bullet has a lot going for it. I honestly believe that we managed many 10s that would have been 9s. This bullet gave the consistent and high degree of accuracy you have come to expect from Sierra. As compared to other bullets Sierra has a reputation for being ‘forgiving’. By this I mean you can shoot them in the lands or off. We tested this bullet from +0.010 into the lands to -0.100 off.”
Bullet Design Features and Factory Meplat Pointing
The new bullet is a conventional tangent ogive design, not a secant ogive VLD-style. However, the new bullet has a longer ogive (curved section) than Sierra’s current 155gr MatchKing. It also has a somewhat shorter bearing surface. Most importantly, the meplats on the new 155s will be pointed up on a special extra die used for the final stage of bullet manufacturing. Currently, many reloaders are using the Whidden Pointing Die System to point up their bullets. (Photo at left shows a 107gr MatchKing pointed with the Whidden Die.) Many tests, including our own research done by Jason Baney, prove that bullet-pointing has real benefits. First, pointing the meplats reduces bullet-to-bullet BC variation. This can help tighten vertical spread at long range. Second, bullet-pointing can also reduce drag, effectively increasing average bullet BC. The result is a bullet with less drop at long range, and less wind drift (all other factors being constant). In Jason’s tests, pointed Clinch River 106gr bullets impacted 18″ higher at 1000 yards than non-pointed bullets from the same lot. That’s dramatic evidence that meplat-pointing enhances BC.
Higher BC Predicted by Actual Match Results
Sierra has not yet completed field-testing to determine the ballistics of the new 155gr MatchKing, so no official BC has been released. Matt Reams noted: “We will not release a BC until comprehensive field tests are complete. At Sierra we don’t ‘guesstimate’. Our BC numbers are based on real-world testing.” Nonetheless, Sierra’s bullet testers and USA Palma team members are telling us that the new bullet definitely impacts higher than the old Sierra Palma bullet when driven at the same velocity. This was observed during the Spirit of America match, and is a sure sign that the new bullet has less drag and a higher effective BC. Team members also believe that the new bullet exhibits less wind drift than the previous 155gr MatchKing:
“As one of the line coaches on the American teams at SOA, I witnessed first-hand the difference between the old and new green box 155s. On practice/warm-up day before the team matches we tested the new bullet against the old bullet at 1K to get elevation zeroes on the new bullet. What we saw was the new 155 printed two (2) MOA higher at 1000 yards than the old bullet with the only difference being the bullet…. In my opinion, the new bullet was at least a minute inside of the old bullet at 1K.” — Steve Hardin
Palma Shooters Praise New ‘Top-Secret’ 155gr MatchKing
In the wake of Team USA’s big win at Spirit of America, many members of the USA Palma Team have commented on the impressive performance of the new bullet. You can read their testimonials in THIS THREAD on the Long-Range.com Forum (registration required to access Forum). Team Coach Emil Praslick III had this to say:
“Sierra was very responsive to the US Team’s request that [Sierra] come up with a new design for a 155 grain projectile. After testing a few prototypes designed by the smart guys at Sierra (mainly Pat Daly) we settled on one that seemed to be a good compromise between an efficient design, and a bullet that would shoot well out of a variety of barrels and chambers. Through testing and practice, we have found that the bullet shoots well into the lands, as well as off. One rifle tested jumped them .050″ with good results!
The bullet QC is excellent, and it definitely does shoot. During the team matches at SOA, I felt that the bullet was well inside the other bullets being shot on the line, but as a coach, I am much more concerned with accuracy over chasing a BC ‘magic number’…. The inherent accuracy of the new bullet is what has sold me on it.
The ogive is well back on this bullet, and will probably jump quite a bit at max length in longer than a ‘standard’ Palma 95/WTC 95 chamber. Some, notably Warner Tool and Wayne Forshee, are working on reamer designs. For now, an existing, ‘short throat’, Palma 95 chamber that seats the old Sierra at approx. 2.780″ to touch the lands should work fine.”
Share the post "Sierra Offers New 155gr .308 MatchKing with Pointed Meplats"
Here’s generous promotion designed to boost membership in the National Rifle Association. Readers who subscribe to either American Handgunner ($17.76/year) or GUNS Magazine ($19.55/year) through special online offers will receive a free one-year NRA membership. The offers are available at AmericanHandgunner.com and GunsMagazine.com. Click the graphic at left to go directly to the Guns Magazine NRA Offer Page.
Gun enthusiasts who order American Handgunner will get a one-year subscription plus a one-year NRA membership for $17.76. A GUNS Magazine order includes 12 monthly issues plus the NRA membership for only $19.55. Current NRA members are given a new NRA membership gift certificate for a family member or friend when they complete the subscription order.
“This will help to build the NRA membership during this critical time period,” said Roy Huntington, publisher of American Handgunner and GUNS magazines. “Now’s the time to sign up a spouse, son, daughter, scout or even a good friend and help us build NRA membership — to help all of us keep our right to own firearms alive.”
FMG Publications, headquartered in San Diego, publishes American Handgunner and GUNS magazines, plus American COP and the trade publication, Shooting Industry.
Share the post "Free NRA Membership with Magazine Subscriptions"
Late this year or early in 2009, Browning will release a new A-Bolt Target rifle. The new A-Bolt Target rifle represents a whole new direction for Browning — no doubt spurred by the success of Savage’s F-TR and F-Class Target rifles. The A-Bolt Target will be offered in both matte blued and stainless versions, in three calibers: .223 Rem, .308 Win, and 300 WSM.
Featuring a laminated wood stock (with adjustable comb), heavy-contour 28″ button-rifled barrel, and single set-trigger, the new Browning should be effective in F-TR (target rifle) class. (Sorry, Browning hasn’t released the set-trigger’s end pull-weight.) With detachable box magazines, and a quick 60° bolt lift, these rifles may also proove popular with tactical shooters (though tac guys may want to shorten the barrels). The .223 version also would make a nice varminter. The .223 has a 1:9″ twist while the .30-caliber guns come with a 1:10″ twist rate.
The Browning A-Bolt Target rifles have some nice features normally found on custom rifles. The action comes glass-bedded in the stock. According to press releases, the buttoned barrels will all be hand-chambered for improved accuracy. The stocks features a satin finish with nice checkering on the grip. The varmint-style forearm looks rigid enough to work well with a bipod, but we think the forearm should be longer for better weight distribution (longer “wheelbase”). The stock is not 3″ wide, so you’d probably want to mount a 3″-wide sled if you shoot this gun from the bench or in F-Open class. What’s all this cost? MSRP for the stainless .223 and .308 rifles is $1489, while the matted blued guns in the same calibers are $1269. 300 WSM versions cost $30.00 on top of those prices for stainless and blued respectively.
Specs for Browning A-Bolt Target Stainless Model
Share the post "Browning Produces New Target Rifles in .223, .308, 300 WSM"
Confused about the meaning of a term such as “meplat”, “magnaflux” or “obturate”? Need to know the OAL of an unusual Wildcat such as the .218 Donaldson Wasp? Well CCI and MidwayUSA offer handy answers on the web. CCI’s Shooters’ Glossary is a very complete collection of gun-related and reloading terms. MidwayUSA’s GunTEC Dictionary contains short descriptions of hundreds of cartridges, plus definitions of thousands of shooting-related words and phrases. How many of you knew that “Maggie’s Drawers” is “a colloquial term used for the red flag once used by pit workers to signal a missed shot at high-power rifle competitions”?
Consulting the dictionary, we learned that “Magnus Force” was not a Tom Selleck TV show. Rather, “Magnus Force is the movement of a bullet in the direction it is rotating (and downward) due to the lower air pressure surrounding it. The low pressure pocket is caused by the effect of the bullet’s fast rotation on the surrounding air.” MidwayUSA’s GunTEC dictionary even includes short “bios” of notable firearms inventors and marksmen, including J.M. Browning, Fredrich von Martini, and Peter Paul Mauser. A serious shooting buff could spend hours browsing the GunTEC dictionary, learning new facts (and a ton of obscure trivia.)
Share the post "Online Resources Provide Helpful Tech Definitions"
Remington Arms just introduced a new cartridge, the 30 Remington AR (aka “30 RAR”), to be used in AR-platform rifles to be built by its DPMS subsidiary. (Remington, DPMS, and Bushmaster are all owned by Cerberus Capital Management, a private holding company.) The cartridge carries the “short, fat” design to the extreme. It is based on a shortened version of the .450 Bushmaster, which itself was a cut-down version of the .284 Winchester. Like the .284 Win, the 30 Remington AR has a rebated rim, so it will fit a .308 Win-sized boltface (0.473″). While it resembles a 30BR, the new case is much fatter, offering an impressive 44 grains of powder capacity. The portly diameter of the 30 RAR case dictates that the magazine will be a single-stack, and will hold only four (4) rounds.
Cram a Big Cartridge in an AR15 Mag and Make Sure It’s a Thirty
What was Remington thinking? Well, the stated project goal was to transform the standard AR15 into a “legitimate big game hunting platform.” Presumably, a 30-caliber cartridge was chosen for marketing purposes as that is the most common deer hunting caliber. The “science” of the design was basically to stuff the biggest cartridge possible in a standard AR15-sized magazine. According to Outdoor Life columnist John Snow: “DPMS President Randy Luth and Remington’s John Fink (brand manager for the rifle division) … both said that the goal was to look at the AR lower and see how much cartridge they could fit in there.”
30 Remington AR (30 RAR) Specifications
Case Capacity
Rim Diam.
Parent Cases
Shoulder
Factory Load
Mag Type
44.0gr H20
0.473″ .308 bolt face
.450 Bushmaster .284 Winchester
25°
125gr SP or 125 B-Tip 2800 fps 0.267 BC
4-Round Single Stack
Factory 30 Remington AR Rifles and Uppers
Initially, the 30 Remington AR round will be chambered in complete, DPMS-built Remington R15 rifles, which start at $1,199.00 MSRP. For production rifles, the expected rate of twist is 1:10″, but that has not been finalized. What about separate uppers? Given the hefty price of the complete rifle, existing AR owners may prefer to purchase a 30-caliber upper by itself. While no release date was given, Remington stated that 30 RAR uppers will definitely be offered for sale in the future.
Impressive Velocities but Much Less Energy than a .308 Win Shooting 160s
With 44 grains of capacity, the 30 RAR can generate some impressive velocities with bullets in the 120-125gr weight range. Remington claims its 125gr factory ammo will deliver 2800 fps muzzle velocities running at about 55,000 psi pressure levels. Three factory loads will be offered: Rem-branded 125gr Core-Lokt PSP and 125gr AccuTip BT, and a UMC-branded 123gr FMJ. At $18.99 per 20-round box, the UMC ammo is intended for inexpensive practice purposes. The $35.99/box AccuTip and $26.49/box Core-Lokt PSP are much costlier. The relatively light-weight bullets used in the Remington ammo have poor Ballistic Coefficients compared to the longer, heavier bullets typically used in a .308 Win or 7mm-08. The 125gr Core-Lokt has a 0.267 BC, while the 125gr AccuTip is somewhat better at 0.335. Nonetheless, Remington’s ballistics tables show that the AccuTip should match the trajectory of a 165gr AccuTip (fired from a .308 Win), fairly well out to 400 yards. However, there is a BIG difference in energy as you can see from the table below. At 300 yards, the 125gr AccuTip delivers 1153 ft/lbs of energy compared to 1661 ft/lbs for a 165gr AccuTip launched at 2700 fps from a .308 Win. (Note: these numbers were calculated with 24″ barrels. Remington’s 30 RAR-chambered R15 rifle has a 22″ barrel, so its performance should be somewhat less impressive.)
COMMENTARY by EDITOR
Our first reaction to the news of Remington’s new cartridge was: “Why?” The obvious (and cynical) answer is that Remington wanted to sell AR-style rifles to deer hunters who need an excuse to purchase a military-style semi-automatic. There may be a market for that… who knows. But there is already a proven, compact 30-caliber cartridge that fits a standard-sized AR15 lower — the 7.62×39. The 7.62×39 won’t push a 125-grainer as fast as the bigger 30 RAR, but the 7.62×39 will still kill a whitetail plenty dead. Perhaps Remington’s engineers should simply have applied themselves to producing a proper (i.e. 100% functional) 7.62×39 magazine. This Editor has tried most of the AR15 7.62×39 magazines on the market (from 3-rd to 30-rd capacity). None of those I tested worked particularly well. Some simple redesign work (call the MagPul folks) would solve that.
Better AR Ballistics with 6.5 and 6mm Cartridges
If the goal was to produce an AR15 with better ballistics and downrange energy than the .223 Rem cartridge delivers, we’re not sure a 30-caliber was the way to go. The 6.5 Grendel performs exceptionally well in AR rifles, delivering great accuracy with 123gr Lapua Scenar or Sierra bullets. Likewise, the AR15 can be a superb High Power and Cross-the-Course platform shooting the 6mmAR cartridge developed by Robert Whitley. The 6mmAR is the 6.5 Grendel necked down to 6mm. Shooting 105 Berger VLDs it comes very, very close to the ballistics of the larger 6mmBR cartridge, and it gives up nothing in accuracy. By contrast, with its low-BC bullets, the 30 Remington AR is not going to be competitive at longer ranges with either the 6.5 Grendel or the 6mmAR. And with factory mags limited to four (4) rounds, you couldn’t use this gun effectively in High Power matches, even if it proves highly accurate on the short course.
Important Innovation or Another Orphan Cartridge?
Only time will tell whether the 30 Remington AR cartridge will catch on with sport shooters and hunters. We’re not sure the round has an important purpose that cannot be filled by existing, proven cartridges. The complete 30 RAR rifles are expensive ($1200+) compared to a typical bolt-action deer rifle, so we wonder how many deer hunters will actually jump on Remington’s bandwagon. Speaking frankly, so long as the cartridge is available only with Remington-made brass, we predict little interest among competitive shooters. Now if Lapua were to produce a 65,000-psi rated version of this cartridge, THAT might interest hunter benchrest shooters and BR for score shooters. A Lapua 30 RAR would be like a 30BR on steroids. But alas, don’t expect Lapua, or Norma, or even Winchester, to produce 30 RAR brass any time soon.
So, does the 30 Remington AR (aka “30 RAR”) have a future? It will certainly stimulate sales of AR-platform rifles to some extent. That’s important because AR sales have been lagging recently. Perhaps that is enough justification for a new round. All things considered however, we think Remington would have been better off building its “AR for big game” around the 6.5 Grendel case, perhaps in a 7mm version. Still, we have to credit Remington’s designers. Using a modern “short, fat” design, with a rebated rim, they’ve achieved impressive velocities in a very compact cartridge. The chopped-down .284 may prove to be a very accurate design.
Share the post "Remington Introduces new 30 Remington AR Cartridge"
Glen Harrison, designer/creator of the original Nesika actions, now has a new Montana-based company, Phoenix Machine Technologies. In time, Harrison plans to produce a full series of high-grade custom actions, using state-of-the-art CNC machining. Currently, Phoenix has been producing CNC-crafted Remington-clone actions. These seem to be working very well and are being used by GA Precision and other top gunsmiths.
Current Phoenix Machine production receivers are Remington 700 derivatives that utilize Remington-style bolts and are being manufactured in long, short and M7 lengths. Teaming up with Dave Kiff of Pacific Tool & Gauge (PT&G), Harrison will offer a selection of custom bolt components made by PT&G. This allows the owner of a Phoenix action to fit out the finished action in many ways. Want a colored bolt shroud? No problem. You can also a choose variety of fluting styles, and pick from a selection of PT&G-crafted bolt handles. There are many action-makers offering Rem-clone style receivers in chrome-moly or stainless steel. With the wide variety of bolt components offered by PT&G, the Phoenix action offers the action-buyer an impressive array of optional features.
For more information about Phoenix Machine Technologies, LLC, call (406) 756-2727 or write 36 Jellison Lane, Suite B, Columbia Falls, MT 59912. Email inquiries may be sent to Lisa [at] boltactions.net.
Share the post "Pacific Tool & Gauge Provides Bolt Components for Phoenix Actions"
Typical soft cases for scoped rifles are 45-46″ overall. These may lack clearance for large, high-magnification scopes, and the front section may be too tight for rifles with a 3″-wide forearm. Our Assistant Editor Jason Baney recently posed the question, “Who makes a high-quality soft case for large varmint and BR-style rifles with wide forearms and barrels 27″ or longer?”
We’ve done some research and identified some affordable options. While there are dozens of possible choices, the products shown below all offer some nice features and cost less than $45.00. NOTE: The Plano case offers a plastic-reinforced rubberized muzzle protector box. These are found on many Kolpin soft cases as well. We think a rubber/plastic nose guard is very important. This ensures your gun can’t slip out of the case muzzle first. A nose-guard also shields the delicate crown against hard objects and metal zippers. (Sooner or later you WILL drop a rifle, and they usually fall nose-first.) Remember that even the finest soft case is no substitute for a sturdy hard case. Also, hard cases are mandatory for airline transport.
48″ Length
Plano’s model 64860 (Brown) or 64800 (Gray) are nice cases that feature hard nose protectors and high-density foam padding. At 48″ overall, the Plano is 2″ longer than most cases. It boasts interior tie-down straps, two external zippered pockets, and an adjustable, padded shoulder strap. Users report the padding is excellent and the 600 dernier material and zippers are very durable. Price is $25.95 at PyramidAir.com.
49″ Length
The Gamo case (item 6212374) is very inexpensive (just $12.99 at AirGunWarehouse), but owners report it is a “great value for the money”. The 48″ interior length should handle most rifles with a 28″ barrel, and there is ample space for a large scope. The case has one large pocket and a fabric shoulder strap on the reverse side. The interior has a soft, fleece-like lining and there is a rubberized, protective layer on the front, rear, and bottom. However, we warn that, because there is no hard nose box, if you leave a gap in the zippers near the front, the muzzle could exit the case. There are two zipper pull-tabs, front and back. Zip them up so they meet near the middle. Also we suggest putting a small rubber cap on the muzzle so it doesn’t catch on the zipper. The same advice applies to any soft case without a plastic nose guard.
50″ Length
The Allen “Euro” is a quality 50″-long case with enough interior space to handle 29-30″ barrels. This deluxe case features a fatter/taller front section to fit guns with wide forearms or attached bipods. This would be a good choice for a long-barreled varmint rifle. It features very thick foam padding (1.5″ per side) and multiple, velcro-closed external pockets. Midsouth Shooters Supply offers this case in hunter green (item 168-91550) for $35.66. A similar Allen-made case in blue or tan sold as the Remington Yukon. The Yukon is $33.66 at Cheaper than Dirt.
52″ Length
Among the ultra-long soft cases, the Kolpin Deluxe Soft Armor Gun Boot is one of the best you can buy. It has the nose-guard we recommend and is very thickly padded. A molded EVA foam bottom with a rubberized “track” allows the case to stand on its own. What are the negatives? Because Kolpin’s Soft Armor Gun Boot is designed for both scoped rifles and shotguns, the width of the front third of the case is pretty narrow. Also there is less clearance at the top than with some other soft cases. However, unless you have an extremely high scope mount or very long stock, this case should work for those long rifles with 30-32″ barrels. The Soft Armor Gun Boot is typically priced from $40-$55.00. Natchez Shooters Supply lists it for $45.50 but they are currently out of stock.
Bulldog Cases offers a bargain-priced 52″ soft case. If your rifle has a 31-32″ barrel, this Bulldog case should handle the length. The 52″ Bulldog features 2-1/4″ total padding thickness, a zippered slash pocket, and a shoulder strap. The 52″ Bulldog is offered in tan (BD242-52), green (BD241-52), or Mossy Oak camo (BD244-52). This case is available directly from Bulldog for $29.99. It is also sold by other vendors on the web for similar prices. NOTE: This case has no nose guard and has less padding than the cases listed above. It’s a “bare-bones” case, but if you have a super-long barrel, there aren’t many other inexpensive choices.
Battle Lake Predator Case — Plenty Long, but Pricey Battle Lake Outdoors makes a 52″-long “Predator” rifle case that “has the best protection possible in a semi-soft case” according to one of our Forum members, Ron G. (aka “Radar”). The “Predator” case has an impact resistent .070″ plastic shell topped by high-grade 1000 Dernier Cordura nylon. The linining is soft “Chambrelle” fiber, which wicks away moisture. Overall, it is an impressive product, but it lacks a plastic nose guard and it costs $89.95. That puts it out of our list of “under $45.00″ products, but this case is worth considering if price is not a major factor.
Share the post "Soft Gun Cases for Long-Barreled Rifles"
Planning an important fall hunt? Here’s a product that will help you pick the most effective bullet for use on big game. The Bullet Test Tube (BTT), an innovative product from Ballistic Technology, allows hunters to test the terminal performance of hunting bullets. This $69.95 unit contains a re-usable wax-like compound that simulates how a bullet penetrates and expands when shot into a game animal. With the BTT, you can measure the wound channel volume (with water), then split the medium in half to measure the wound channel’s length and width. To re-use the BTT, simply melt the wax-like core material in a standard 1.5 gallon crock-pot or large pan and pour it into a replacement cardboard target mold.
Click the screen below to watch a YouTube Video that demonstrates the whole process. (If you are at work, turn down the audio volume first.)
To learn more about the Bullet Test Tube, read this Product FAQ. The Bullet Test Tube has earned the NRA Publications 2007 Golden Bullseye Award and Field & Stream’s 2006 “Best of the Best” Accessories Award. The product is available through major vendors including Cabelas.com, MidwayUSA.com, and Sinclair International.
If you wish to capture the bullet after it passes through the test medium, add the Xtender accessory which slips on the end. This allows hunters to examine bullet integrity as well as wound cavity. Sinclair Int’l prices the Bullet Test Tube at $61.25, while the Xtender is an additional $57.60.
Share the post "Hunters: Measure Bullet Performance with Bullet Test Tube"
Forum Member Jeff R. (“aJR”) from Australia has crafted a slick, handsome cartridge holder to use with his heavy Benchrest Gun. This is a simple, elegant design that would be relatively easy to build in a home workshop. Composed of two blocks of wood with parallel metal arms, the unit adjusts for height and block angle. Jeff tells us: “This is my new cartridge dispenser I knocked up in the shed. I wanted to get the record rounds up next to the action and this is adjustable for just about any gun/port configuration, right or left.” The cartridge caddy has ten round holes (for record shots) in the top wood block, stacked in two rows. The base piece has five holes for sighters, with the holes cut at an angle for easy access.
By the way, Jeff’s 1000-yard rifle is worth mentioning in its own right. The gun shoots a large 30-cal magnum wildcat cartridge and has set many Australian BR records. The rifle features a tensioned barrel system, custom Magnum drop-port action, and a metal/composite stock. Click HERE for more info. There’s even a YouTube Video showing Jeff shooting his big boomer.
Share the post "Custom Cartridge Caddy Design from Australia"
Conditions were hot and windy at the 2008 NBRSA 100/200 Nationals, held this week at the Ben Avery Shooting Facility in Phoenix, AZ. When the dust settled Tony Boyer came out on top, again proving his mastery of the sport in very challenging conditions. (During many matches, winds gusted from 15-25 mph.) Boyer, widely regarded as THE best short-range benchrest shooter in history, won the Four-Gun Overall, the Three-Gun Overall, and the Sporter/LV Two-Gun Overall Championships. Consider Boyer’s class by class Grand Agg rankings:
Overall, this was a very successful match with 130+ shooters, including most of the big names in the sport. There were Hall of Famers up and down the line. Match Director (and railgun world-record holder) Gary Ocock ran a smooth match.
For complete NBRSA Nationals results, with the scores of all 130+ competitors, visit the NBRSA Nationals Thread on Benchrest.com. Woody from Colorado has posted .pdf and text files with all the Grand Agg details, multi-gun results, plus most of the individual events (e.g. LV 100, HV100, Sporter 200 etc.). Below are highlights, with the top 15 shooters in the 4-Gun, and 3-Gun Grand Agg.
Right now the NBRSA 100-Yard/200-Yard Nationals is wrapping up. Tony Boyer and other legends will be hauling away trophies, but some newcomers also did very well in very challenging (and windy) conditions. If you’re interested in learning more about the most accurate form of shooting, Benchrest Hall of Famer Speedy Gonzalez has prepared a comprehensive Guide to Benchrest Competition. It covers all aspects of the game: gear selection (hardware), reloading methods and tools, plus shooting skills and strategies. All of this is available on the web for free, thanks to Speedy and the Swedish Benchrest Shooters Assn. (SWBSA). CLICK HERE to read Speedy’s very complete BR Guide.
Speedy’s article is a gold-mine of info on shooting components and specialized reloading tools. It is also richly illustrated with high-quality photos showing gun components and reloading gear. Many of the photos show tools that have been sectioned so you can view the internals.
Speedy also discusses bullet design, and load tuning. There is a very informative section on Time Management and Target Management that will benefit all competitive shooters, no matter what their discipline.
Share the post "Speedy's Guide to Short-Range Benchrest"
Nat’l Championship Results
Sierra has a new 155gr Palma bullet, and it’s a winner. The new 155gr MatchKing bullet, featuring a longer ogive and factory-pointed meplats, was used by Team USA at the recent Spirit of America match. According to many team shooters and coach Emil Praslick III, the new bullet helped the American team achieve an impressive victory over arch-rival England and other national squads.
Bullet Design Features and Factory Meplat Pointing
Remington Arms just introduced a new cartridge, the 30 Remington AR (aka “30 RAR”), to be used in AR-platform rifles to be built by its DPMS subsidiary. (Remington, DPMS, and Bushmaster are all owned by Cerberus Capital Management, a private holding company.) The cartridge carries the “short, fat” design to the extreme. It is based on a shortened version of the .450 Bushmaster, which itself was a cut-down version of the .284 Winchester. Like the .284 Win, the 30 Remington AR has a rebated rim, so it will fit a .308 Win-sized boltface (0.473″). While it resembles a 30BR, the new case is much fatter, offering an impressive 44 grains of powder capacity. The portly diameter of the 30 RAR case dictates that the magazine will be a single-stack, and will hold only four (4) rounds.
COMMENTARY by EDITOR
Glen Harrison, designer/creator of the original Nesika actions, now has a new Montana-based company, 
Conditions were hot and windy at the 2008 NBRSA 100/200 Nationals, held this week at the Ben Avery Shooting Facility in Phoenix, AZ. When the dust settled Tony Boyer came out on top, again proving his mastery of the sport in very challenging conditions. (During many matches, winds gusted from 15-25 mph.) Boyer, widely regarded as THE best short-range benchrest shooter in history, won the Four-Gun Overall, the Three-Gun Overall, and the Sporter/LV Two-Gun Overall Championships. Consider Boyer’s class by class Grand Agg rankings:
