November 22nd, 2008

Lee Classic Cast Iron Press — Great Press for a Great Price

Lee reloading products have always represented good “bang for the buck”. The Lee Classic Cast “O”-style press is no exception — it works as well as some other presses costing twice as much. One well-known “boutique” bullet maker has recently switched to Lee presses because the tolerances and lack of slop were actually superior to more expensive presses.

Though relatively inexpensive, the Lee Classic is a well-designed unit with a strong, cast-iron frame and all-steel linkage. It has important (and very cool) features you won’t find on an RCBS RockChucker. First, the ram is drilled in the center and fitted with a plastic drop tube so spent primers drop right out the bottom (where you position your trash can). Second, the handle adjusts for length and “attack angle”. This allows you to change the leverage to suit your task. As Lee explains: “The start and stop position is adjustable with a 48-tooth, ratchet-type handle clamp. In addition, the handle length is completely adjustable. Shorten when you’re loading handgun and short rifle cases.” As you can see from the photos, you can also mount the handle on either side, left or right.

Lee Classic Cast Iron PressLee Classic Cast Iron Press

You can purchase the Lee Classic Cast Press for under $75.00 at major vendors. MidwayUSA sells the Lee Classic (item 317831) for $72.99. Natchez Shooters Supply also offers the Lee Classic for $72.99, item LEE90998.

Lee Classic Cast Press Primer systemMark Trope of SurplusRifle.com has written a detailed Review of the Lee Classic Press. He notes that the press is “southpaw friendly” and he praises the priming system. Mark found that the spent primer drop tube worked very well and that the press “works perfect and has great sensitivity” when seating primers.

Not yet convinced? CLICK HERE to read comments from actual Lee Classic owners. Here are some highlights:

“It has a large, heavy-duty 1-1/8″ diameter ram that has been drilled out for spent primers … and a long clear plastic hose attached to it so you can route it to a trash can. [This is] a VERY well thought-out way to collect ALL primers to your trash can when you’re decapping.” –D. Oldham

“Fit and finish are impeccable. The spent primer disposal system is simple and neat. There is no spring or flexing of any kind. There is virtually no play in the ram, which is a good tight fit in the frame. Operation is totally smooth.” –R. Smith

“Totally outclasses any other press in its price range. Runs with presses in the $100-$120 range.”–W. Rose

“I like…the position of the ram at priming. The Lee seats the primer with the ram at the bottom of the stroke vs. the RC II, which seats in the middle of the stroke. Priming at the bottom of the stroke gives you a much better ‘feel’.” –M. Gallagher

Similar Posts: