Fit 1"-Diameter Scopes in 30mm Rings with Brownells Adapters
Forum member Jacob spotted this simple, but effective set of scope ring inserts on the Brownells’ Website. With these inserts, you can use a scope with 1″-diameter main tube in 30mm rings. Non-marring, matte black Delrin sleeves surround the scope tube so it can fit larger-diameter rings. Each sleeve comes in two parts for easy installation around your scope tube. This way you can use the same 30mm rings for all your scopes. Ring Reducers are sold as front/rear kits. Cost is just $19.99 for the 1″ to 30mm converters, item 084-000-091. There are also sets that reduce 30mm rings to 25mm, and 1″ rings to 3/4″ or 7/8″.
Note: These Brownells units simply function as plastic bushings. Unlike Burris Signature Ring inserts, they do not allow you to “pre-load” windage or elevation. If your rings are misaligned, the Brownells Ring Reducers won’t correct that problem.
Similar Posts:
- Ring Inserts Adapt 1″-Diameter Scopes to Fit 30mm Rings
- Put 1″-Diameter Optics in 30mm Rings with Brownells Adapters
- Ring Reducers Adapt 30mm Rings to Fit 1″ Scope Tubes
- Burris Signature Rings and Inserts on Sale at MidwayUSA
- Burris Signature Rings on Sale
Share the post "Fit 1"-Diameter Scopes in 30mm Rings with Brownells Adapters"
I have a size 10 and need to go to a size 9. or 9.5.