February 13th, 2011

Precision Scope Rails for Savage Actions from Bench-Source

Bench-Source, founded by David Dorris, President of Vertex Mfg. Corp., and benchrest shooter Darrell Jones, is now producing precision scope-mounting bases for the Savage round-top Target Action. CNC-machined to exact tolerances from 7075-T6 aircraft aluminum, these bases are extremely light (under two ounces) yet strong. Both Picatinny-style bases and Davidson dovetail bases are offered with either zero taper (flat) or with +20 MOA of built-in elevation. Bench-Source rails also feature precision-cut reliefs to match the loading ports on the Savage Target Actions.

Bench-source scope rails

Bench-source scope rails

The Picatinny (Weaver) base costs $84.95 (either flat or +20 MOA) while the Davidson dovetail base is just $69.95 (either flat or +20 MOA). This is a good price considering the quality of the materials and machining. (The 7075-T6 aircraft grade aluminum is three times as expensive as the aluminum alloy used by some other rail-makers.) Either style base is available with either a “luster” or polished finish. The price includes a Torx wrench and mounting screws.

AccurateShooter.com Field TestedBench-source scope rails

Bench-source.com Savage Picatinny RailTechnical Specifications
The Picatinny M1913-A Mounting Rail features 14 symmetrically spaced cross-slots. The base is long enough to mount any popular scope. The Picatinny base is approximately .610″ tall. Parallelism deviates less than .002″ between the dovetail clamping area and top of the receiver after mounting. The screws used are #6-48 x 3/8″ long and holes are drilled and counter-bored to the correct depths. This ensures that users will not damage their barrel threads or encounter interference with the locking lugs when closing the bolt.

The Davidson 1/2″ x 60º Mounting Rail dovetail is parallel over its entire length. The rail is held to very tight tolerances to minimize windage correction (at different ring positions). The Davidson rail should self-center on your action when installed per the included instructions. Both ends of the mount are chamfered slightly on a 30° angle to let the sharp corners of the mating rings align themselves without binding. The 60º dovetails are machined +/- .001″ and measured over two optimum-diameter pins to minimize over-clamping of your rings.

For more information, visit Bench-Source.com or phone: (662) 895-0803.

Similar Posts:

Share the post "Precision Scope Rails for Savage Actions from Bench-Source"

Tags: , , , , ,