Creedmoor Sports has knocked ten bucks off the price of the Windtronic 2 Windmeter. For three days only (Feb. 17-19), the Windtronic 2 is ON SALE at Creedmoor Sports, for $89.00. Most every other source sells the Windtronic 2 for $99.00 or more.
Windtronic 2 Reads Wind from Any Angle
This unique product reads wind speed from any angle, because the impeller spins on a vertical axis (like a helicopter’s main rotor). By contrast, with most other windmeters you need to manually align the device in the correct direction. Those devices may deliver mis-reads unless you can manually turn the meter. However, with the Windtronic 2 you can “set and forget” — mount the device on a pole or tripod near your shooting station with the screen in view, and it’s good to go, no matter which way the wind blows. The Windtronic’s LCD display shows current wind speed, average wind speed, maximum wind speed and a Beaufort bar graph. A standard lithium battery should supply YEARS of service. Made in Germany by Kaindl Electronics, the Windtronic 2 comes with a two-year manufacturer’s warranty.
The Windtronic 2 features rotating cups mounted on a vertical axis. With this design you don’t have to align the unit with the wind, unlike the Kestrel WindMeter or SpeedTech WindMate™ devices. Many users feel the Windtronic’s unique design allows it to read wind speeds more accurately; it certainly can respond to shifting winds more easily. The omni-directional functionality of the Windtronic 2 allows it to be mounted on a stand or tripod and continuously display current wind speed, max wind speed, and average velocity. The Windtronic 2 does NOT gauge temperature, barometric pressure, humidity, or density altitude. The Windtronic only records wind speeds, but it does that task exceptionally well.
With Copper Exchange prices edging towards $4.00/lb, cartridge brass in any condition is worth saving. (Prices reached $4.50/lb last year!) Even worn-out, split, or Berdan-primed brass with negligible value to reloaders can be worth real money given current scrap metal prices. People commonly leave .22 LR casings on the ground because they can’t be easily reloaded. Nowadays, it may be worth saving brass of any kind. In California, scrap metal dealers are paying $1.75 a pound for used cartridge brass — including buckets of used .22 LR casings.
Of course, if you have good pistol and rifle brass that’s worth reloading, don’t take it to a scrap dealer. You should be able to get more money selling the brass to reloaders via Forum Classifieds or Gunbroker.com. However, if you’ve got buckets of old, split, tarnished brass, .22 LR casings, or Berdan-primed cases and you don’t want to take the time to clean, inspect, and sort your cases… maybe you should just sell ‘em for scrap. For someone with hundreds of pounds of miscellaneous brass, current scrap prices can be attractive. In the past, at ranges, we’ve seen scores of milsurp Berdan-primed cases left on the ground since they are not easily reloadable. Now, we predict those cases will be collected and sold for scrap.
One of the most innovative rifles we tried at Media Day in January was the Merkel RX Helix, a very impressive piece of rifle engineering. Merkel claims the RX Helix is the fastest-cycling centerfire bolt action in the world. We can’t confirm that claim, but the Helix certainly cycles faster than any other centerfire bolt-gun this Editor has ever tried. (Yes, a Fortner biathlon action can be worked more rapidly, but that’s a rimfire). Both Jason and I really liked Merkel’s RX Helix. It balances well, the action is smooth, the wood is gorgeous, and the overall design thinking that went into this $3795.00 (MSRP) take-down rifle is very impressive. The Helix’s universal-sized action lets you shoot anything from a .222 Rem to a .300 Win Mag with the same gun. And — get this — you can really swap barrels (and change bolt heads) in under one minute with no tools, employing a dead-simple bolt-release lever concealed under the push-button-released removable forearm.
Rotary 7-Lug Bolt
While the RX Helix is a straight-pull rifle, it retains the strength and safety of a rotary bolt head with seven locking lugs that seat in a barrel extension. Unlike a Blaser, the RX Helix has a fully-enclosed action housing. That’s an important safety feature. Moreover, since the RX Helix employs a closed action, the bolt body doesn’t travel outside that action. This means the shooter can maintain his cheekweld with an eye on the target as he cycles the bolt.
The RX Helix’s linear (back and forth) bolt-handle motion is transmitted to the bolt head through a 1:2 ratio “transmission” gearing system. This allows smooth and fast cycling without the rotational or tipping movement found on other straight-pull, bolt-action rifles, such as the Blaser.
The Merkel linear-movement action cycles exceptionally fast, which allows for faster follow-up shots — a good thing if you’re hunting dangerous game. The RX Helix features a manual cocking lever on the tang and a direct trigger system. And here’s good news for southpaws — though Merkel does not make a dedicated left-hand version, lefties can very easily use their right hand to work the bolt while maintaining cheekweld. That may sound awkward, but with practice, it’s actually pretty efficient.
Fast, Easy Disassembly and Barrel Exchanges
The video below shows how the Helix can be disassembled (for cleaning or transport) in a matter of seconds WITHOUT TOOLS. The forearm slips off with the push of a button. A short lever on the left side of the action holds the barrel. Simply rotate the lever and the barrel (with bolt head) slips off. That’s it — in 30 seconds the rifle is apart, and you don’t even need an allen wrench as with a Blaser.
The RX Helix has a universal action length that covers calibers from .222 Rem to .300 Win Mag. Changing calibers (or chamberings) takes less than a minute with the appropriate barrel, bolt-head and magazine. Weaver rails are integrated into the action, and iron sights with three-dot rear and one-dot front fiber-optic inserts are standard.
The RX Helix is available with a standard black finish as well as four levels of design—Arabesque, Wild Boar, Spirit, and Deluxe. An all-carbon-fiber version is also available either with or without a carbon-wrapped barrel. The RX Helix comes in a wide range of popular calibers including .222 Rem, .223 Rem, .243 Win, 6.5×55 SE, .270 Win, 7×64, .308 Win, .30-06 Sprg., 8×57 IS, 9.3×62, 7mm Rem Mag and .300 Win Mag. Barrel lengths vary according to caliber, and barrels, bolt-heads and magazines are available for caliber changes. MSRP for the standard black rifle with Grade 2 wood is $3,795.00.
Fire up your VCRs boys, this is the episode of Shooting USA you don’t want to miss — the 2012 SHOT Show Special. Shooting USA’s hour-long 2012 SHOT Show Edition airs on the Outdoor Channel Wednesday February 15 at 3:00 PM, 8:00 PM, and 12:00 Midnight (Thurs) Eastern Time. (Check local listings for other time zones.) In this 60-minute special, the Shooting USA team checks out the latest and greatest guns and gear. Host Jim Scoutten and assistants John Scoutten, Mike Irvine and Jay Gilmore trek through the Sands Convention Center in Las Vegas reporting on new products for 2012.
Here’s a 4-minute-long Preview of the SHOT Show Special:
While you’re tuned in to the Outdoor Channel to view the SHOT Show Special, you may want to catch this week’s Impossible Shots show as well. This week the trick shooters run Col. Jeff Cooper’s speed challenge, the El Presidente, using single-action six guns. In addition, the legendary Jerry Miculek engages multiple targets using both rifle and revolver. Impossible Shots airs Wednesdays at 6:30 pm and 11:00 pm Eastern Time.
Report by German Salazar
The 2012 Berger Bullets Southwest Long Range Nationals fired last week at Phoenix’s Ben Avery Shooting Facility left competitors from all over the US and Canada smiling and ready to return for next year’s event. With over 200 competitors from 40 states and several Canadian provinces, this was truly a national level event and the scores reflected that intensity. However, it wasn’t just about the shooting; as at any large rifle match, renewing old friendships, seeing friends from the AccurateShooter Forum and enjoying time and a few meals with them are just as important.
The week began on Tuesday with a wind reading clinic by Mid Tompkins who knows more about how air moves across a rifle range than just about anyone. Next in line was Wednesday’s 600-yard match, a nice warm-up for the long-range shooting to come. Thursday we got down to business with a Palma team match. The sling winners were the US National Team composed of Trudie Fay, Bryan Litz, Justin Skaret and Peter Church. In F-Open, the winning team was Team Norma/Berger composed of Larry Bartholome, John Brewer, Danny Biggs, and Jim Murphy. The winning F-TR team was the Arizona State Rifle & Pistol Assn. squad, with Warren Dean, John Chilton, Steve Lockwood and German Salazar.
Individual shooting resumed on Friday, Saturday and Sunday as well as one more team match at 1000 yards. Conditions throughout the week were picture perfect as cool mornings gave way to afternoons in the mid 70’s. One of the Canadian shooters mentioned that it was 35 below at home on Saturday while we were in shirt sleeves! The wind was challenging without ever being as vicious as it can be on certain days in Phoenix. More than one Eastern shooter was heard to comment that they had never seen wind as switchy as this. Overall, it tested one’s ability without reaching a level of frustration — just perfect. Trudie Fay was the overall winner in the sling category, Jim Murphy in F-Open and James Croft in F-TR, but many other shooters won cash and bullets from our generous sponsor Berger Bullets as well as many door prizes at the barbeque from Nightforce, Krieger, Leupold, Sierra and many others.
Put this match on your list for next year, it’s well worth the effort. We have 100 firing points (check out the photo below) and we’re ready to put them all to use!
All-Star Instructors Lead Clinic A training clinic was held on Feb. 7th (Day 1), with a true all-star cadre of instructors. The clinic started with Nancy Tompkins instructing sling shooters on proper position/shooting style, while Darrell Buell and Larry Bartholome did the same for F-TR and F-Open shooters. Mid Tompkins then conducted a lengthy wind clinic which featured a series of drills at 1000 yards to observe specific wind trends. Many shooters commented on the benefits of the exercise as well as the opportunity to get some ‘trigger time’ before the main event. Finally, Bryan Litz (photo right) gave a class on long-range ballistics.
Nosler is offering deeply discounted pricing on Over-Run brass in these calibers: 6.5×55 Swede, .338 Lapua Magnum, 30-378 Weatherby, and 340 Weatherby. You can save up to 33% on the single-box price. Nosler puts 50 cases in a box of 6.5×55 brass. However, there are only 25 cases per box for the other, larger cartridges.
In addition to the bargain brass, Nosler is also offering big discounts on select Custom Competition bullets, and Nosler Custom Ammunition. For example, a 250-count box of Nosler’s 190gr .308-Cal Custom Comp bullets is marked down to $69.95 from $91.00, a 23% savings. Visit Nosler’s Over-Run Sales Page to see all the discounted products.
Nosler Sale tip by EdLongrange. We welcome reader submissions.
Rodrigo Rosa is a rising star in the world of High Power shooting. Though he’s been shooting competitively for only four years, he is already a top contender at the national level. In 2011, the young marksman, who now lives and works in New Hampshire, was right up with the leaders at the NRA National High Power Championships. At Perry, Rodrigo finished second in the Across-the-Course phase and finished third in the Long Range National Championship. He was also on the winning 2d Amendment match team with Norm Houle. Over the last couple of years, Rodrigo has lead the field at New England High Power events. He was New Hampshire State Champ in 2010 and 2011, Massachusetts State Champ in 2011, and Mid-Range (and Across-The-Course) Vermont State Champion in 2009. Rosa is also a two-time NE Regional Across-the-Course Champion, winning titles in 2008 and 2011. That’s an impressive shooting resume for a young man who shot his first High Power match in 2008, and had to borrow money to get his first real match rifle.
Rodrigo tells us: “I had a good year in Camp Perry in 2011. My goal was only to perform well in the across-the-course event, so taking second place after Carl Bernosky by only 3 points and taking third place in the Long Range event was a real treat.”
What was the “secret” of Rosa’s meteoric rise from rookie shooter to podium performer at Camp Perry? Rodrigo replied: “Key factors? I would have to say dry-fire practice, and working on consistency and the ‘mental game’. I spent many hours dry-firing last winter, particularly working on my off-hand position. Despite such training my technique was still flawed at the beginning of the year. I could dry-fire very well but the results did not show on target. I believe that my ability to finally build a mental sequence that allows me to perform the same movements time-and-time again, on demand, made the greatest difference on my results.”
Interview with Rodrigo Rosa — Born to Shoot
We had the opportunity to chat with Rodrigo. He told us how he got started in competitive shooting. He then discussed his shooting techniques and his reloading methods. At our request, Rodrigo offers some tips for new sling-shooters. Rosa also revealed his preferences in hardware and shooting gear.
AccurateShooter: Rodrigo, tell us about your background. How did you get involved in shooting?
Rosa: I grew up on a farm in Brazil. When I was about 11 years old my mom bought me an air rifle, and I later inherited my grandpa’s Winchester .22LR. I hunted many rabbits and ducks with that rifle until I was 17 years old when my studies became more important. I traveled to the USA in late 2004 to finish my Veterinary clinical training at Cornell University, where I met my wife-to-be. We got married in 2005 and moved to California for internships. It wasn’t until early 2007 when I decided to buy a rifle and join a gun club. All I could afford was a simple .308 hunting rifle. With the .308, I tried (with limited success) to hit small metal silhouettes at 600 yards. Despite my limited success I decided to educate myself about the shooting sports, predominantly by reading books by David Tubb and Nancy Tompkins, as well as foreign publications.
My wife Kate and I moved to New Hampshire in 2007, when I decided to take a personal loan to buy a better rifle, suited for High Power competition. I joined the Nashua NH Fish and Game Association and started to work on my skills. In late 2010 I met Norm Houle who became a good friend and gave me extra motivation to stay in the game.
AccurateShooter: What are your strengths and what are the areas where you need improvement. What training methods do you use to improve those weak points?
Rosa: My strengths are my ability to concentrate, attention to detail and perseverance. The areas I tend to work on the most are my mental systems. I know I am able to shoot a perfect score in any yard line and shooting position, so I spend most of my time coming up with ways to make my shooting sequence as meticulous and repetitive as possible. I believe I still have a lot of work to do….
AccurateShooter: What are the best and worst things about competing at Perry?
Rosa: 2011 was my second year competing in Perry (I also started the match in 2009 but had to leave early for a family issue). I had one of the best weeks of my life! Perry is a wonderfully beautiful and challenging range, and the friends I had the pleasure to share my time with were the highlight of the trip. From previous experience, I would say that the heat and humidity are the worst things
about Perry, but 2011 gifted the competitors with amazingly pleasant weather.
AccurateShooter: Rodrigo, do you have any tips for novice High Power shooters?
Rosa: Start by investing in good equipment — buy quality and you will buy it only once. Seek the advice of successful shooters. All truly good shooters will be glad to share their “secrets”, for it is only worth winning when all competitors can shoot their best. Develop a safe, reasonably good load for your cartridge and quit messing with it! If you already have an accurate rifle your time is much better spent working on your hold than on developing loads. Be ready! Develop checklists, plans, mental sequences. The less you can worry about, and the more prepared you are for adverse situations at the firing line, the better your chances will be.
AccurateShooter: Speaking of load development, tell us what load you shoot, and what methods you use to create accurate ammo.
Rosa: I shoot the 6mmXC cartridge Across-the-Course and Long-Range (except for Palma, of course). I use Federal 210M primers, Norma brass, Hodgdon 4350 powder, Sierra 70gr bullets for 200 yards and DTAC 115gr bullets from 300 to 1000 yards. My loads are: 39.5 grains H4350 with the Sierra 70gr; 37.5 grains H4350 with DTAC 115gr for 300 yards; and lastly, for Mid-Range and Long-Range, I use a stout H4350 load with the DTAC 115s. (Editor: Start at 37.0 grains H4350 and work up with the 115s; Rodrigo’s long-range load is near max).
The most important steps of my reloading are accurate load weighing (I weigh ALL loads) and bullet selection. I select all the bullets I shoot from 600 to 1000 yards by bearing surface and length. I do not spend any time doing elaborate load testing (and re-testing). All I care about is having a reasonably accurate load that functions smoothly in my rifle.
AccurateShooter: Tell us about your shooting coat and sling. Do you have any advice concerning coat fit and sling adjustment?
Rosa: I currently wear a Monard shooting coat. Proper fit is fundamental for anyone who wishes to be competitive in any category of position rifle shooting, and the folks at Monard certainly have got that down. My advice to anyone who is going to invest hard-earned money in a coat is to make sure that the maker uses at least 15 different measurements of his/her body. Anything less than that is not acceptable in my opinion. I also prefer the stiffness and coolness of canvas over leather. Leather tends to mold better to ones body but softens and shrinks when wet. Since High Power shooters must often shoot in the rain I believe that canvas is a more durable and stable material. For a sling I always used the Superior Shooting Systems Heart Breaker Sling. This is an extremely well-made sling crafted to last many decades. It is important to cut the new sling to fit one’s arm diameter so that the “hinge” is located between the arm and the hand. I did not know this important “trick” for the longest time until David Tubb called my attention to it at Perry last year.
AccurateShooter: You shoot a Tubb 2000 match rifle. Tell us the features of the T2K you really like, and explain how you set up the sights and buttstock for different positions.
Rosa: The Tubb 2000 rifle is the only rifle I have ever shot Across-the-Course. It is an extremely user-friendly gun that truly allows the shooter to extract all that a competitive target rifle can offer. I used to have only one buttstock and was therefore forced to make adjustments between shooting positions. Now I have three buttstocks individually set up for each position — a major asset in my opinion. My off-hand buttstock is probably the least orthodox of the three. It has a good deal of added weight to help balance the gun and a very narrow buttplate. I like the narrow buttplate because it fits my small shoulder better. This plate is, however, kept mostly flat (very shallow curvature) in order to comply with NRA rules (less than 1/2 inch depth).
Canting — I truly enjoy the ability to cant the T2K rifle to fit my body. Anyone who watches me shooting seated will notice that I use a great amount of canting in that seated position. Canting is a major asset and can greatly improve most shooter’s position by increasing comfort. The key thing with canting is you must be consistent with the amount of cant you use (hint: learn how to use a bubble level).
Forearm — I have shortened the tubular handguard/fore-end of my rifle in order to improve balance as well. People occasionally ask me: Didn’t you get nervous about cutting such an expensive rifle? (I had taken a loan to buy the rifle and it wasn’t even paid for yet). My answer was “Not at all!” My philosophy is that if something does not fit you or does not do the job for which it was intended, then you MUST act on it. It is pointless to have a rather costly piece of machinery if it does not lead to 10s and Xs.
Sights — I use a Warner #1 rear sight and a “Right Sight” in the front. I currently use the “Houle Tube” sight extension tube (bloop tube) made by Norm Houle. This bloop tube has been a major improvement. It lets me have a short, balanced gun for off-hand and a long gun for sling-supported positions. I must admit that I did not believe these extension devices would repeat zero until I tried one. The Houle Tubes are incredible. These extensions come in 2″, 4″ and 6″ lengths and repeat zero flawlessly every time.
Gunsmithing — Dick Beaudoin from Derry, NH has done most of the customization work on my rifle. I want to give him credit. His patience and attention to detail has made all the difference.
Editor’s Comment: We thank Forum member Rodrigo Rosa for taking the time to share his knowledge with our readers. He is a very talented, yet humble young shooter who works diligently on his game. We have no doubt that one day we will see Rodrigo standing on top of the podium at Camp Perry. Boa sorte Rodrigo, we wish you 10s and Xs and continued success…
Idaho-based Hooker Tactical Safety & Defense has introduced an interesting new product that records images and video directly from your scope’s eyepiece, while still allowing the shooter to look through the scope. This system, dubbed the Third-Eye Sharp Shooter Eye-Cam (“Eye-Cam”), fits a small (8 oz.) video camera directly to the eyepiece of a riflescope. The Eye-Cam outputs live video to an iPhone, lap-top computer, or DVR. One can easily imagine the benefits of such a system for tactical and law enforcement marksmen, as well as game hunters. The key elements of a tactical engagement can be recorded, in real time, for later review and analysis. Or a hunter can record the results of his shot at a “once-in-a-lifetime” bull elk.
No Scope Modifications Required
The water-, shock-, and dust-resistant Eye-Cam is easily installed, with no modifications to your scope. Your scope’s zoom, elevation, and windage controls are not altered, and there are no changes to point of aim or point of impact. Unlike most other video adapters for scopes, the compact Eye-Cam does NOT block off the shooter’s view through the eye-piece. You can continue to use the scope normally. Hooker Tactical claims that the Eye-Cam does not distort or change the image viewed through the scope: “The clarity of the image… is as accurate and dependable as if the [Eye-Cam] was not there.”
Comment: Despite Hooker’s claims, we do suspect that the shooter would notice a slight reduction in brightness, and possible softening of focus at the edges — simply as the result of having another piece of glass placed between his eye and the scope’s actual eyepiece.
Sharp Shooter Eye-Cam Costs $2370.00
The Hooker Tactical Eye-Cam retails for $2370.00. It weighs just 8 ounces. Hooker offers a variety of flexible collars that fit over scope eyepieces, allowing the Eye-Cam to be adapted to most popular scopes. Eye-Cams ship with collar of choice, video cables, power cable, 9-volt power supply, and a handy storage pouch. Hooker Tactical stands behind its product with a 2-year unconditional warranty for repair and replacement “with proper usage”. For more info, visit www.HookerTactical.com, or call Hooker Tactical at (208) 527-3395.
Editor’s Comment: This is an intriguing product. While the Eye-Cam’s utility for hunters and law enforcement marksmen is obvious, we think the Eye-Cam could benefit competition shooters as well. The Eye-Cam could be particularly effective in shooter training, allowing a coach to see how well his student actually responds to hold-off calls and wind reads. The recorded video could also allow a shooter to review the effects of mirage as he proceeded through a course of fire. Video would also help a shooter develop techniques to hold the gun more steady and have a better follow-through.
While the Hooker Tactical Eye-Cam is very expensive ($2370.00), we think this is the predecessor of future products that will provide a variety of digital viewing/recording options for rifle shooters. As such products evolve (and become more affordable), we predict digital viewing technology will benefit precision shooters in many ways.
Low-Cost Alternative MeoPix iPhone Adapter for Spotting Scopes
The Third-Eye Sharp Shooter Eye-Cam costs a whopping $2370.00. For a tiny fraction of that price (about $70), Meopta’s MeoPix digi-scoping adapter lets you record stills and movies directly to an iPhone from a spotting scope.
Though you won’t be able to record what you actually see through your riflescope, the Meopta adapter will perform many of the functions of the Eye-Cam, such as recording the results of hunting shots — so long as you’ve got your spotter aimed at the target. Meopta’s simple but cleverly-designed MeoPix lets you easily record photos and videos from your range and hunting sessions. Anything you can see through the spotting scope can be captured by an iPhone. Hunters can capture images of distant prey, and record successful shots on game.
The MeoPix bracket is a universal-type device that was developed to allow the iPhone 4 or 4s models to interface with ANY binocular or spotting scope eyepiece (fitted cup required). When mated to a long-range optic, the MeoPix transforms a smart phone into a handy, long-range photo and movie capturing tool. The Apple-approved MeoPix adapter attaches securely to the iPhone. Meopta claims the MeoPix bracket ensures precise alignment and excellent image quality.
Eye-Cam Tip by EdLongRange. We welcome reader submissions.
Here’s smart new product for someone who wants to keep a handgun safely secured, but quickly accessible under a desk at home or at a business. The new SpeedVault (from GunVault) is a drop-down safe that can be mounted under a desk or in various concealed locations. The handgun is cradled in a a holster-like protective foam lined interior. The SpeedVault offers a combination of covert placement and fast, reliable access.
The SpeedVault is constructed of tamper-proof, 18-gauge steel and available in digital lock or biometric finger print scanner. An activation button triggers a spring-loaded door that not only has a high-strength lock mechanism, but also performs reliably, time after time. Foolproof security is ensured with an audio and LED low battery indicator to help guard against direct tampering and unexpected power loss. Mounting hardware is included. The SpeedVault comes in two models, the SV 500 (with standard lock) for $199.99, and the SVB 500 (with fingerprint lock system) for $319.99. Dimensions are the same for both units: Width: 3.5″ W x 6.5″ front to back x 13″ top to bottom.
Fingerprint-Reading Biometrics (SVB Model Only)
The higher-priced SpeedVault Bio handgun safe uses biometrics, specifically fingerprint recognition, to access the safe contents rapidly. A high-performance algorithm is used to achieve speedy identification of enrolled fingerprints and at the same time has a very low False Reject Rate (FRR). The self-learning algorithm adds new details to the fingerprint templates each time a user touches the fingerprint sensor, reducing the chance of FRR. The system can handle up to 120 fingerprint templates.
Need a portable, light-weight target stand? Here’s a clever, minimalist alternative to large wood-framed or PVC pipe target stands. Those will work, but they take up lots of space in ones vehicle and, unless you build a very solid base, they tend to rock back and forth, or even blow over in high winds.
For under $20.00 you can get a metal sign frame that can be staked directly in the ground. These sign frames, commonly used for real estate signs, are secure in high winds, and they are just about ideal if you need a simple target for zeroing during a varmint hunt. With most of these frames you can secure a cardboard target backer with zip ties or threaded fasteners. With some frames you just slide the cardboard backer into slots, so no fasteners are required. The most common “Empire-style” sign frame has a rectangular section at the top with two pointed ends about 10″ apart at the bottom. Put your foot on the crossbar to drive the frame into the ground. An angle-iron, Empire-style frame (no fasteners required) is offered by the fastrealestatesigns.com for $19.99.
Inexpensive Reinforced-Plastic Sign Frames
Shown at right is a plastic sign frame that requires no fasteners. Simply cut your cardboard target backer to 24″ (w) x 18″ (h) and slide it in from the top. Then stick the frame into the ground using the foot-slot near the bottom. These fiberglass-reinforced plastic sign frames are light yet surprisingly strong. They cost just $11.95 from Yardsigns.org. There is also an open top model ($10.95), and a larger, rectangular version ($15.95) with the legs placed 19″ apart.
Staked Frames Not For All Terrain
If you shoot where the ground is very hard or rocky, these stake-in-the-ground frames may not work so well. They need to be seated firmly in the soil. But if you shoot in an area with soft soil or grassy turf, these frames can be a handy solution. Simple, light-weight and easy to set-up, they make a nice “field expedient” target holder.
Creedmoor Sports has knocked ten bucks off the price of the Windtronic 2 Windmeter. For three days only (Feb. 17-19), the Windtronic 2 is ON SALE at Creedmoor Sports, for $89.00. Most every other source sells the Windtronic 2 for $99.00 or more.
The Windtronic 2 features rotating cups mounted on a vertical axis. With this design you don’t have to align the unit with the wind, unlike the Kestrel WindMeter or SpeedTech WindMate™ devices. Many users feel the Windtronic’s unique design allows it to read wind speeds more accurately; it certainly can respond to shifting winds more easily. The omni-directional functionality of the Windtronic 2 allows it to be mounted on a stand or tripod and continuously display current wind speed, max wind speed, and average velocity. The Windtronic 2 does NOT gauge temperature, barometric pressure, humidity, or density altitude. The Windtronic only records wind speeds, but it does that task exceptionally well.
Rotary 7-Lug Bolt
Fire up your VCRs boys, this is the episode of 
A training clinic was held on Feb. 7th (Day 1), with a true all-star cadre of instructors. The clinic started with Nancy Tompkins instructing sling shooters on proper position/shooting style, while Darrell Buell and Larry Bartholome did the same for F-TR and F-Open shooters. Mid Tompkins then conducted a lengthy wind clinic which featured a series of drills at 1000 yards to observe specific wind trends. Many shooters commented on the benefits of the exercise as well as the opportunity to get some ‘trigger time’ before the main event. Finally, Bryan Litz (photo right) gave a class on long-range ballistics.
Rodrigo Rosa is a rising star in the world of High Power shooting. Though he’s been shooting competitively for only four years, he is already a top contender at the national level. In 2011, the young marksman, who now lives and works in New Hampshire, was right up with the leaders at the NRA National High Power Championships. At Perry, Rodrigo finished second in the Across-the-Course phase and finished third in the Long Range National Championship. He was also on the winning 2d Amendment match team with Norm Houle. Over the last couple of years, Rodrigo has lead the field at New England High Power events. He was New Hampshire State Champ in 2010 and 2011, Massachusetts State Champ in 2011, and Mid-Range (and Across-The-Course) Vermont State Champion in 2009. Rosa is also a two-time NE Regional Across-the-Course Champion, winning titles in 2008 and 2011. That’s an impressive shooting resume for a young man who shot his first High Power match in 2008, and had to borrow money to get his first real match rifle.
AccurateShooter: Tell us about your shooting coat and sling. Do you have any advice concerning coat fit and sling adjustment?
Sharp Shooter Eye-Cam Costs $2370.00
Low-Cost Alternative
Here’s smart new product for someone who wants to keep a handgun safely secured, but quickly accessible under a desk at home or at a business. The new 
Inexpensive Reinforced-Plastic Sign Frames
