As an Amazon Associate, this site earns a commission from Amazon sales.











January 24th, 2021

Sunday GunDay: Rimfire Rifle Multi-Discipline Showcase

rimfire .22 LR accurateshooter forum
Rimfire benchrest rifle of Forum member Peebles24.

With the variety of rimfire disciplines, from cowboy action to Olympic three-position smallbore, there are countless different rimfire designs on the market — bolt guns, lever guns, single-shots, toggle-links and more. These may shoot the same ammo, but they certainly vary in looks and ergonomics. This is testimony to human creativity.

In our Shooters’ Forum, you’ll find a long-running thread showcasing rimfire rifles for plinking, hunting, 3P Target Shooting, Silhouette, Rimfire F-Class, NRL22 and more. Here are some of the notable rifles in that Forum thread, with brief build/component details.

Anschutz BR-50 Benchrest Rifle with Upgrades

This is member BHarvey’s rare Anschutz 2013 BR50, with upgrades. This is actually a factory BR-50 stock, but the owner fitted a custom Benchmark barrel, along with a Fudd barrel tuner. That massive butt-plate is three POUNDS of custom-crafted copper, which helps with balance. This rifle was also featured in our popular Guns of the Week collection.

Anschutz 2013 .22 LR BR-50

Rimfire F-Class Rig with Curly Maple Stock

Stiller Holeshot 2500X smallbore F-Class Cerus stock.22 LR rimfire prone rifleThis handsome, ultra-accurate Smallbore F-Class rig belongs to member RMist of Team Pro-Shot Products. It has a Holeshot (Stiller) 2500X, stunning Cerus Curly Maple wood stock, Nightforce scope. Up front is the joystick co-axial SEB Joy-Pod.

How does this impressive rimfire F-Classer shoot? Amazingly well. That target at right shows TEN (10) rounds fired at 100 yards. Most centerfire rifles would have trouble beating that level of accuracy.

Stiller Holeshot 2500X smallbore F-Class Cerus stock.22 LR rimfire prone rifle

Rimfire Tactical Rig with CZ Action and McRees Precision Chassis

Here’s a modern chassis rig built with a CZ 455 action. Forum member A-Rob upgraded the CZ 455 with a SCAR 2-stage trigger. This rifle features a Keystone Accuracy-fitted glue-in barrel, Athlon 10-40x scope and McRees Precision chassis. As you can see from the target, it shoots great. Note: CZ has replaced its 455s with the new CZ 457 series with available metal chassis precision model. CLICK HERE to see full target sheet with six 5-shot groups at 50 yards, averaging 0.270″.

Remington 513T M37 82G CMP Kimber .22 LR rimfire prone rifle

IR 50/50 Sporter with 2500 XS Action and Muller 7R Barrel

Here is member doclu60’s Holeshot Arms (Stiller) 2500XS IR 50/50 Sporter. It features a polished action, barrel, rings/bases, trigger guard, and bolt knob. There are premium components: Bix ‘N Andy trigger, Peightal stock, and Muller 7R barrel. The optic is a Leupold Custom Shop VX3i 6.5-20x40mm wearing Rick Averill custom leather scope caps.

Stiller 2500 XS IR 50/50 .22 LR rimfire prone rifle

Rampro .22 LR Pistol by Gre-Tan

This is a very rare .22 LR bolt-action silhouette pistol. It is a RamPro 22 LR single-shot crafted by Greg Tannel of Gre-Tan Rifles. Member Tonedaddy says this is the only .22 LR Rampro bolt-action pistol built by Gre-Tan in existence. Not the beautifully-figured wood stock.

Rampro Gre-Tan greg tannel.22 LR rimfire bolt action single-shot

Benchrest Rimfire with Turbo V3 Action and Owner-Crafted Stock

Member J.J. Coe reports: “Here is a little side project I recently finished. It features a
Turbo V3 action, Benchmark 3-groove barrel chambered by Mark Penrod, Jewell trigger, and Leupold 40X barrel in Harrell’s offset rings.” Notably, J.J. made the 5-piece laminate stock himself. Nice work! Yes this gun is very accurate as you can see from the match target. Below that is another one of J.J.’s rimfires, an Anschutz 54 in another handsome stock he made himself. This guy has talent!

Turbo V3 leupold 40x benchmark rimfire .22 LR be3nchrest rifle

SAKO P94S Rimfire Trio

This trio of SAKO P94S rimfire rifles belongs to Forum member “Thomasconnor”. He tells us: “The one in the middle is probably the most accurate .22 LR rifle I’ve owned. It was about 6 pounds (without the scope or rings) before I made a heavy buttplate for it. In its current configuration it’s under 8 pounds with a giant scope and steel rings. It now has a Jewell trigger, Benchmark barrel, oversized action screws, and Alex Sitman stock”.

Sako p94s finland smallbore .22 LR rimfire prone rifle

Springfield Model 1922s

Member SnapDraw posted: “Here are my Springfield Model 1922s. One is an M1 I got from a shooting club back East. It has an NRA stock with upgraded M2 bolt and Lyman super target spot 15X scope. And the other (below) is an unmolested (except front sight) M2 with military stock. Both are amazing shooters!”

Springfield 1922 M2 M1 CMP Kimber .22 LR rimfire prone rifle

Benchrest Modified Anschutz 2013

Member Esk308 Picked up this pre-owned rifle in the summer of 2020. Along with the Anschutz 2013 action it features a 27″ Lilja barrel, laminated Shehane stock, and Nightforce 15-55x52mm scope in Kelbly rings. On the end of the barrel is a Harrels tuner with Don Blue tube. Esk308 now uses a John Loh front rest with SEB Bigfoot rear bag.

.22 LR benchrest anschutz 2013 lilja barrel shehane stock rifle

Anschutz 2013 in M. Werks Stock

Here is another Anschutz model 2013, but in a completely different configuration. This is a rimfire prone match rifle upgraded with a Bartlein gain-twist barrel and an M. Werks tuner stock. Note how the barreled action is secured. This handsome rig belongs to Forum member Jeffrey.

Anschutz 2013 .22 LR M. Werks rimfire prone rifle

Factory-Class Ruger with Big Bipod

Forum member DavidJoe from Texas put together this rig for a local factory-class rimfire series. He reports: “There’s a discipline where a factory rifle under $1000.00 gets to shoot at a bigger-ringed target. I’m going to try out this new Ruger combination in those limited matches, weighed down with an enormous Valdada scope on a Sinclair bipod.”

ruger rimfire smallbore .22 LR Sinclair bipod DavidJoe

Wood-Stocked Trio — Two Remingtons and a Kimber

Here are three .22 LR rigs belonging to member Alamo308. Note the competition iron sights on the middle rifle, a Remington M37 which features a Custom Birdseye Maple stock. The Kimber 82G was sold directly by the CMP as a training rifle. These CMP Kimbers were often extremely accurate.

Remington 513T M37 82G CMP Kimber .22 LR rimfire prone rifleCZ 455 McCrees Precision tactical rimfire

Marlin 980S Custom with Owner-Crafted Stock

The rifle is based off a Marlin 980S action with a Green Mountain 20″ fluted barrel. The action was bedded with a one-piece aluminum bedding block and Devcon 10110. Owner Kakotoch tells us: “Trigger is a Rifle Basix I took down to just over 16 oz. by using a different pull weight screw. The scope is a Japanese-made Tasco 36x that I picked up NIB for $100 and is surprisingly clear. The stock was my winter project — it’s laminated carbon fiber and walnut, finished with Tru-Oil. I cut, shaped, and polished the buttplate by hand.”

Marlin 980S Green Mountain .22 LR rimfire prone rifle

Permalink Gear Review, Gunsmithing, Handguns 2 Comments »
January 24th, 2021

FREE Targets for Rimfire Games and Tactical Cross-Training

Dots Target
AIM SMALL, MISS SMALL: At 25 yards, this is a fun rimfire plinking target. At longer distances it can be a great training target for precision centerfire shooters.

We’re seeing great interest in .22 LR rimfire tactical cross-training. With a rimfire rig, you can practice regularly for a fraction of the cost of centerfire training. That way you can build your skill set without breaking the bank. Decent rimfire ammo can be had for five cents a round. Compare that to fifty cents (or more) for handloads and maybe $1.20 per round for factory ammo.

To help with rimfire cross-training, here are some of our favorite rimfire tactical targets, all in easy-to-print PDF format. Click each target image to download the FREE target. You’ll find more free targets for load development, precision practice, and fun shooting on our AccurateShooter FREE Targets Page

Targets for Rimfire Training and Fun Matches

Here’s a rimfire training target with “big to small” target circles. Start with the largest circles, then move to the smaller ones in sequence. This systematic drill provides increasing challenge shot-by-shot. Novices often are quite surprised to see their accuracy improve as they move from bigger to smaller aiming points. That provides positive feedback — always a good thing.

Right Click and “Save as” to download printable PDF versions of target.

Rimfire Practice Targets

SPECIAL BONUS–Rimfire Tactical Precision Targets

These FREE targets by DesertFrog are offered in Adobe Acrobat format for easy printing.
CLICK HERE to download all six targets as a .ZIP archive.

tactical target cross-training

More Free Targets…

These and many other free targets are available at MyTargets.com.

free targets grid red circles small circle targets Grid dot target
Permalink - Articles, Shooting Skills No Comments »