Whidden Gunworks makes great sizing and seating dies. The Whidden full-length sizing die with neck bushing is very popular because it allows you to “tune” the neck tension by using different bushings, with larger or smaller inside diameters. In this video, John Whidden explains how to choose a the right bushing size for use with your neck-sizing and full-length sizing bushing dies.
For most applications, John suggest starting with the caliper-measured outside diameter of a loaded cartridge (with your choice of bullet), and then SUBTRACT about three thousandths. For example, if your loaded round mics at .333, then you would want to start with a 0.330 neck bushing. John notes, however, that you may want to experiment with bushings, going down a thousandth and up a thousandth. With thin In addition, as your brass ages and the necks harden, you may want to change your bushing size.
Quick Tip: Try Flipping Your Bushings
You may also want to experiment with “flipping” your neck bushings to alternate the side that first contacts the neck of the case. (One side of the bushing is usually marked with the size, while the other side is unmarked.) So try “number side up” as well as “number side down”.
Some folks believe that one side of the bushing may allow a smoother entry, and that this can enhance concentricity. Other people think they can get very slightly more or less neck tension depending on how the bushing is oriented. This is a subtle effect, but it costs nothing to experiment.
If one bushing orientation proves better you can mark the “up” side with nail polish so that you can always orient the bushing optimally. NOTE: We have confirmed that some bushings are actually made with a slight taper. In addition, bushings may get distorted slightly when the brand name and size is stamped. Therefore there IS a reason to try both orientations.
Share the post "Choosing the Best Neck Bushing Size — Tips from John Whidden"
by James Mock
After owning three different rifles with BAT actions, I have become a loyal fan of BAT Machine quality and customer service. Back in 2009, I traded my BAT/Scoville for the BAT/Leonard that I currently shoot. This rifle has a long history and Terry Leonard told me that “Old 87″ (as I have named it) was one of the earlier BATs that he stocked. He wrapped the stock in fiberglass and used 2-part epoxy back then. I must say that this rifle has held up remarkably well since it dates back to the 1990s. The action is a RB/LP/RE octagon Model B with .308 bolt-face.
Rifle Has Multiple Barrels for Multiple Disciplines
With this gun, I have shot several barrels of different calibers (.22 PPC, .22 PPC-short .095, 6mm PPC, 6XC, 6mm Dasher, .30BR, and will soon have a 6 BR-AI). It has been an exceptionally accurate rifle in several disciplines. In the hands of previous owners, it earned several Hall-of-Fame (HOF) points, and a “middle-of-the-pack” shooter (me) even received a HOF point with this rifle.
For most of its life, Old 87 served as a short range benchrest rifle, but I have used it for the last few years as a 600-yard rifle with the 6mm Dasher barrel. I was lucky enough to earn the Shooter of the Year award at the Prince Memorial Range in Louisiana for 2016.
After shooting my two Dasher barrels for last eight years, I have noticed a drop-off in accuracy at 600 yards. A decision had to be made — get a new barrel or sell the rifle and retire from competition. I am in my late 70s and my competition days are limited due mainly to a chronic neck problem. After mulling over the decision to retire or not, I decided to give Old 87 one more year. Here is the story of how we upgraded the old war-horse.
Old 87 REBORN — Upgrading with New Components
I prefer cut-rifled barrels with four lands and grooves and have had success with .236 bore diameters and 1:8″ twist in long range rifles. I searched for barrels meeting those parameters and found a suitable BRUX at Bugholes.com (Southern Precision Rifles).
The 6BR-AI Option — Easy Fire Forming
I thought about having Billy Stevens chamber it for the Dasher, but decided to try something new. There seems to be a lot of interest in the 6BR-AI and I said, “Why not?” Well, I bought a shortened Dasher die from Harrell’s and will use my Wilson Dasher seating die. Bart Sauter was kind enough to let me use his reamer for chambering.
Fitting a New Roller-Type Cocking Piece on Older BAT Action
Since I was into the project this deep, I called Mike Ezell and ordered one of his Tungsten powder-dampened tuners. Since Old 87 had thousands of rounds since the firing pin spring has been replaced, I decided that it was probably needed. Well, I got to thinking (very dangerous) and asked Daryle Thom if it would be feasible to put a roller-type cocking piece and a new firing pin spring on such an old action.
The folks at BAT are very accommodating and they said that it would be no problem with such a conversion. While my bolt was in Idaho, the barrel with Ezell tuner arrived and I could not shoot it. However, my friend Jeff Turner loaned me his BAT bolt to see if it would work. Although the rifles differ in age by 15 or more years, the borrowed bolt worked perfectly in my rifle. This is a testimony to the great machine work performed at BAT Machine.
New Bolt Roller Tail-Piece Makes a Big Difference in Cocking Effort
With the borrowed bolt I managed to fire-form 50 rounds and get them ready for our 600-yard match on September 16. The folks at BAT quickly fixed my bolt by replacing the mainspring and ejector spring, polishing the ejector, and replacing the tail-piece with their roller type. Pictured below is this tail piece that makes a remarkable difference in the force needed to cock the action. It is amazing what this little wheel can do… even when placed in a 25+ year old action.
Working with the Ezell Barrel Tuner — Small Increments Work Best
Also, I would like to congratulate Mike Ezell on his new tuner which contains powdered Tungsten. It is easy to set up and Mike will help a buyer get maximum effectiveness from the unit. Just give him a call. Below is a picture of the tuner. I was lucky enough to have some time to “play” with it before the match.
Talking about the tuner, Mike writes: “Our new barrel tuners… PDT stands for particle dampening technology. The science is there, we just applied it to a barrel tuner. The advantages are a wider tune window and more efficient control of barrel harmonics…in a tuner design that actually looks good.”
Mike advised me to set the tuner by turning it all the way into the shoulder and then come out to zero or the second time zero comes up if there is not at least half of a turn between the shoulder and the first zero. It is best to start with a proven load and adjust the tuner from that load. As unlikely as it seems, a rifle can go from a good tune to a very poor tune with only 5 marks (.005”) and vice versa.
Mike cautions those who use his tuner to NOT make adjustments which are too large. As a matter of fact, he recommends adjustments of .001 inch at a time. Ezell’s tuners are screwed onto the barrel with .900” by 32 threads per inch and has 32 marks on the circumference of the tuner. Therefore, each mark moves the tuner in or out by .001 inch. There are three set screws with Teflon tips which provide friction for the tuner on the threads. Do not tighten the screws so tight as they damage the fine threads.
If you want the smoothest bolt possible for your BAT, call or e-mail Daryle or Bruce Thom at BAT Machine and discuss your needs with them. I am sure glad that I did. If you want a state-of-the-Art tuner for your barrel, give Mike Ezell a call or visit his Ezell Custom Rifles Facebook Page.
— Good shooting, James Mock
Share the post "6BR Ackley Revival for Benchrest Rifle from 1990s"
Marksmanship competition is back! Slowly but surely, shooting sports are returning to normal, after many major events were cancelled due to the COVID pandemic. We were pleased to see the CMP Eastern Games were held this year, after being cancelled in 2020. The revived 2021 Eastern Games, held April 22 through May 2, 2021, were a huge success.
There were over 420 competitors at the 2021 Eastern CMP Games and High Power Rifle Matches held at Camp Butner in North Carolina. With more than 1,500 event entries, the Eastern Games featured a full schedule of rifle and pistol matches, including many new competitions added to the lineup. In addition to the matches, there were a variety of training programs such as an M1 Garand Clinic and Rifle Marksmanship 101 with live-fire training.
Along with Rifle Marksmanship 101, the CMP offered a Pistol Marksmanship 101 Course and accompanying M9 EIC Match was held for the first time at Camp Butner. Similar to Rifle Marksmanship 101, participants in the Pistol Course were instructed in the classroom and on the range on firearm and competition fundamentals, including proper firing practices and safety guidelines. Other pistol additions to the schedule in 2021 were .22 Rimfire Pistol, Center Fire and .45 Pistol 900 Aggregates.
Brian Williams Wins 3-Gun and 4-Gun Aggregates plus Rimfire Sporter
The star of the 2021 Eastern Games was Brian Williams of Granby, Massachusetts. Williams earned several top finishes in rifle matches, with Garand, Springfield, M1 Carbine, and Modern Military competition victories. His consistent performances earned him both the Three Gun and Four Gun Aggregate titles. Brian even won the Rimfire Sporter Match! Williams was only eight Xs from the current Four Gun Aggregate Eastern Games record score of 1152-35X, which he personally set in 2019. He also holds Eastern Games records in the Modern Military and Carbine events.
Another top 2021 Eastern Games performer was SFC Brandon Green, a 3-time National High Power Champion. Green won the CMP 2400 Overall Aggregate at the 2021 Eastern Games with an impressive 2379-97X score. Along the way Brandon won the EIC Service Rifle Match setting a new Eastern Games record with a 497-26X tally.
We were pleased to see the 2021 CMP Eastern Games included participation by disabled shooters:
There were many M1 Garand shooters at Camp Butner this year. Training included a special clinic focused on the Garand.
Share the post "The Games Are Back! 2021 CMP Eastern Games Are a Success"
SFC Brandon Green is a shooting superstar. Green won his third NRA National High Power Rifle Championship in 2018 at Camp Atterbury. He dominated the HP Championship cycle, finishing eight points and ten Xs ahead of his nearest competitor. Brandon also won High Power National Championships in 2015 and 2013. And in 2017 he set all-time Service Rifle Records at the CMP’s National Trophy Matches at Camp Perry. Just two weeks ago, he won the CMP 2400 Overall Aggregate at the 2021 CMP Eastern Games, (2379-97X), setting a new record 497-26X in the EIC Service Rifle match. When he’s “on his game”, SFC Green is very hard to beat. He has no weaknesses, excelling at all positions, both rapid-fire and slow-fire.
Wicked Fast and Smooth…
Brandon Shoots Bolt Gun, Rapid-Fire
In this remarkable video, Brandon shows why he is tough to beat in rapid-fire. Using a Tubb 2000 bolt-action target rifle, Green displays amazing speed working the bolt and then immediately recapturing a rock-steady hold. Our reaction when viewing this video was: “Wow… this guy is beyond good.” We think you’ll agree. Anyone who has shot prone with sling should appreciate the remarkable skills which make Brandon one of the USAMU’s top shooters. Watching this man in action is like watching Michael Jordan in his prime. You’re seeing one of the very best ever…
SFC Brandon Green — 300m Rapid Fire Prone Training with Tubb 2000:
Share the post "3-Time Nat’l HP Champ SFC Brandon Green — Fast with Bolt Gun"
The Henry AR-7 Survival rifle is a unique rifle. Weighing just 3.5 pounds, this little semi-auto rimfire can perform pest-control duties for a farmer or rancher, or serve as a utility rifle carried in a truck or ATV. The cleverly-designed AR-7 is affordably priced, just $269.99 at Sportsman’s Warehouse.
We think most gun-owners would enjoy adding an AR-7 to their collection. The Henry AR-7 breaks down for easy carry in a backpack or a vehicle. The barrel, receiver, and magazines all fit INSIDE the buttstock. That’s handy. And this little 3.5-pound rifle offers surprisingly good accuracy.
If you don’t like basic black, Henry offers two camo versions from the factory: True-Timber Kanati Camo, and Viper Western Camo. Click the photo below for full-screen (2048 pixel wide) image:
Or, if you have artistic skills (and confidence with spray cans), you can paint your AR-7 yourself, as this owner did. The talented gun-painter reports: “[This is a] great little gun that is accurate and I love how it packs away. I paint all my black guns. Already took a grouse at 16 yards.”
History of the Henry AR-7 Rifle
Starting in 1959 the AR-7 was provided to U.S. Air Force fliers as a survival rifle to use if they were stranded in a remote area. Today the AR-7 is a favorite of bush pilots, backpackers, and backcountry adventurers who, like their Air Force counterparts, need a rifle that’s easy to carry yet can take down small game. Like the original Henry U.S. Survival Rifle, this innovative, semi-automatic rimfire rig is lightweight (3.5 lbs.) and highly portable. At just 16.5″ long, with all components stowed, it easily fits into a backpack, or the cargo area of an ATV, truck, boat. or plane. The AR-7 is chambered in .22 LR so you can carry plenty of ammo without adding much weight to your gear. When disassembled, all the pieces fit inside the impact-resistant, water-resistant stock.
Assembly is as easy as attaching the receiver to the stock, inserting the barrel, and screwing on the barrel nut. In a few seconds, without any tools, the Henry U.S. Survival AR-7 is ready for action. It now comes standard with a steel barrel covered in tough ABS plastic with a protective coating for corrosion resistance. The Henry U.S. Survival AR-7 is available in three finishes; Black, True Timber Kanati Camo Pattern, and True Timber Viper Western Camo Pattern. All models are equipped with an adjustable rear sight and a blade front sight. As you can see below, the built-in storage can be used to hold magazines and ammunition as well as the rifle components.
Another AR-7 owner posted this review:
Simple Goodness: Henry AR-7 — Fun Modern Version of a Classic
Henry got this modern take of the AR-7 right. Gentle finger-tighten is all it takes to assemble. The funky orange plastic sight on the end of the barrel is kind of loud, but was also easy to target with. Brand spanking new, I was getting grapefruit-sized patterns out of each 8-round mag at 50 feet. For a compact take-down, was surprised that length-of-pull was satisfactory for a six-foot guy. It didn’t feel cramped.
For realistic backpack, bail-out, or bug-out situations this would be a smart choice. It was fussy with a single Rem Golden in the first mag… but after that no problems, and no issues at all with Federal and CCI. The safety is right-handed but large and easy to get used to. The charge handle retracts so [you must] pull it up before pulling back, but that motion seemed to become reflexive pretty quickly. The mag eject is in front of the trigger and pushes forward. All in all, [the AR-7 offers a] really nice, compact form factor. [It is] light, perfect for backpack plinking and … low-rent varmint sniping.
Precision Rifle Challenge on Shooting USA This Week
This week, Shooting USA TV features a show that should interest PRS/NRL fans, tactical marksmen, and long range hunters. Run in Utah’s backcountry, the Hornady Precision Rifle Challenge is a unique long range competition with serious wind and elevation changes. The show airs Wednesday, 5/12/21 at 9:00 PM Eastern on the Outdoor Channel, and then again Thursday at 3:00 PM.
This wasn’t a typical PRS Pro Series match by any means. Participants in this challenging Precision Rifle match encounter tough conditions not typically seen in other tactical matches.
This video is great — lots of equipment closeups, stage set-ups, plus drone footage of range.
This Shooting USA episode airs Wednesday, May 12, 2021, at 9:00 PM Eastern (8:00 PM Central) on the Outdoor Channel. If you miss that, it runs again on Thursday afternoon at 3:00 PM. In addition, you can watch all episodes of Shooting USA on the VIMEO channel by subscription. Each episode is just $0.99.
Share the post "Precision Rifle Challenge Featured on Shooting USA TV"
Power Trimming Technology Saves Time
Trimming and chamfering brass are tasks hand-loaders grow to hate. Those chores are time-consuming and tiresome. Thankfully there are faster, better alternatives to manual trimming/chamfering. In this article, Forum member Erik Cortina shows how to use the Giraud tool which trims and chamfers in one operation. Erik has his own YouTube Channel dedicated to precision reloading and accurizing. Here we feature Erik’s video about the “mother of all brass trimmers”, the Giraud powered case trimmer. Erik says: “If you do volume reloading… this is the only trimmer to get. It not only trims to length but it also chamfers your case mouth inside and out.” In his video, Erik offers some very clever and useful tips that will help you get the most from your Giraud.
This is a manufacturer’s photo showing an older model.
The Giraud trimmer is very precise. When set up correctly, it can trim brass with amazing consistency. In the video, Erik trims five pieces of brass in 15 seconds (6:32 mark). He then measures all five with precision calipers (7:00-8:08). All lengths are exact within .0005 (half a thousandth). Erik notes that the Giraud trimmer indexes off the case shoulder. As long as you have fire-formed brass with consistent base-to-shoulder dimensions, you should get very consistent trim lengths.
The secret to the system is a 3-way cutting head. This cutter can be swapped in and out in a couple minutes with wrenches provided with the kit. Erik has three different heads; one each for 6.5mm, 7mm, and .30 caliber. The video shows how to adjust the cutting heads to match caliber diameter (and to get the desired amount of inside/outside chamfer).
To trim and chamfer cases, you simply insert them nose-first into the cartridge-specific case-holder. Erik offers a smart tip — He uses a die locking ring to position the cartridge holder (3:15). This can be locked in place. Erik says die locking rings work much better than the hex-nuts provided by Giraud (with the hex-nut, one must re-set cut length each time you change case-holders.)
The Giraud can be used in either horizontal or vertical modes. Erik prefers to have the trimmer aligned vertically, allowing him to push cases down on the trimmer head. But the trimming unit has twin sets of rubber feet, allowing horizontal or vertical orientation.
Improved Case-Holder Made with Chamber Reamer:
For his .284 Shehane, Erik had to create his own case-holder (Giraud does not make one for that wildcat cartridge). Erik used his chamber reamer. To his surprise, Erik found that the brass was easier to trim in the custom case holder (compared to the Giraud-made spring-loaded holders). With a perfect fit, trimming and case extraction went more smoothly and the process was easier on his hands. (See 9:00-10:00). Based on Erik’s experience, you may want to create your own custom case-holder.
Trim Bullet Meplats Also
With a special bullet-holder fitting and meplat cutter head, the Giraud power trimmer can be used to trim bullet meplats. Trimming meplats can help make the Ballistic Coefficents of a batch of bullets more consistent. Uniforming meplats is also often done as a first step in the process of “tipping” bullets to improve BC.
Share the post "Power to the People — Cortina Reviews Giraud Power Trimmer"
Meet the new T-Rex front rest from Rodzilla. In the world of front rests there have been many innovations over the past decade, but this new front rest from Rodzilla really represents significant innovation. The new T-Rex offers impressive capabilities that can truly take your shooting experience to the next level.
At first glance the new T-Rex may resemble some other coaxial front rests. The T-Rex has a joystick, three points of ground contact, and a platform for the rifle. But look closer and you’ll see this isn’t your typical rest. Designer/builder Rod Brakhage (the Rod in Rodzilla) has started from the ground up to create the most user-friendly, match-ready, modular front rest on the market. The new T-Rex is already in high demand, but currently Rodzilla has been fulfilling orders in about 8 weeks. T-Rex MSRP ranges from $1895.00 to $2305.00 depending on options.
The T-Rex weighs just over 21 pounds — about the same as many mid-sized rests. However the T-Rex has a large footprint, rivaling the largest rests on the market. Rod tells us: “The T-Rex has a similar footprint to the SEB MAX… 12.5″ wide X 11.25″ front to back. However, at just over 21 lbs. my rest weighs less than a SEB NEO.” This combination (wide base with moderate weight) allows for an incredibly stable platform that is still quite portable.
Rugged Carry Case Makes Transport Easy
Rodzilla delivers the T-Rex in a custom-designed hard carry case that fits it perfectly and still has room for additional feet and accessories. This sturdy case makes taking the T-Rex to matches easy. The case is strong enough that I can stack things on top of it in my truck. One side note, if you plan on storing your rest in the case between matches, it’s wise to put a desiccant pack in the case to absorb moisture.
The T-Rex boasts an adjustable joystick that extends from 15.5″ to 21″ in length. With this adjustability, no matter what your stock length or design, you can find a comfortable position without having to stretch uncomfortably. And you won’t have to shop for a joystick extension.
Using the T-Rex is a pure pleasure when shooting prone F-Class or from the bench. That’s because of its revolutionary ability to make large vertical adjustments without getting out of position. This is accomplished with a detachable arm/handle you can actuate while behind the gun. (This is the long T-handle on the right side of the rest).
The simplest way to show why this is a game changer is to consider when you’ve just left the 800-yard line during a match. You head up to the 900-yard line, get all set up, the range officer calls a hot line and suddenly realize you didn’t adjust your elevation for the new yardage. Normally you’d have to turn your scope dials then get up from your position to adjust your front rest, or at best stretch uncomfortably in hopes of reaching your rest adjustments. With the T-Rex, you simply turn the right-side gross elevation handle while still in position, move to your new hold point, and begin firing.
This same principal applies to other situations that require adjusting vertical without breaking your shooting position. All of this is accomplished in conjunction with an incredibly sensitive, yet easy-to-adjust counterbalance system. Once set, the counterbalance ensures that smooth and fluid motion occurs in any direction without any resistance or fear of backlash that might affect your shots.
Very Wide Horizontal Range is Useful in Matches
When it comes to looking downrange, the T-Rex can deliver nearly twice the range of horizontal motion as that of some other rests. (In high ratio mode, there is about 70 MOA of horizontal travel.) This means you can quickly scan a wide expanse of targets/flags without having to change magnification or go to your spotting scope. The huge field of view is a great help when shooting in a condition that is switching and you want to view targets on either side.
Rodzilla offers a number of options for the T-Rex. The first choice is the top. Select the Rodzilla 5-Axis roller top or the new 5-Axis IBS-legal sandbag top. Or, if your budget permits, you can order both — they are easily interchangeable in minutes. The video below shows the easy top-swap procedure:
This video explains how to exchange tops on the Rodzilla T-Rex
5-Axis Top Advantages
Rod Brakhage tells us: “This innovative new 5-Axis top rotates independently of the base plate so no matter how the rest is set on the line you only need to move your rear bag to pan across the row of targets with no binding of the rifle. Also, the sides of the rifle run against vertical Delrin rollers.”
Color Choices for Rodzilla T-Rex Base
In addition to the choice of tops, there are four (4) standard colors on the website, but for an additional fee you can have it made in just about any color you want, which is pretty cool.
Choose Standard Feet, Sand Feet, or Both
When you order a T-Rex, you can choose standard bench feet or large, gorgeous sand/dirt feet. Or order them both, as I did. I use the bench feet at my regular club where I shoot from wood and concrete platforms, but the sand feet are great for matches held on dirt, gravel, sand, or grass. These sand feet provide an incredibly stable platform on the ground.
Linear Bearings Allow Ultra-Smooth and Precise Adjustments
Rodzilla’s Rod Brakhage is a smart, innovative designer committed to improving the shooter’s experience. One of Rod’s key innovations in the T-Rex is the use of linear ball bearings for both X and Y axis: “The horizontal/vertical assembly, or X-Y block, moves on 6 double-sealed ball bearings that travel on hardened shafts for effortless movement”.* This system delivers a smooth, fluidity of movement that lets you aim quickly and efficiently. Gone are the days of having to move PAST your aim point and then come back (to get the aim right), or resetting your joystick position after every shot. With the T-Rex, you make one smooth, precise move and your aim is set. And it stays set after the shot.
The T-Rex allows you to position your crosshairs with pinpoint precision every time and if you need to move them just a hair, you can do it with ease. In F-Class, we often hold between the target’s scoring lines to correct for wind variations (without touching the scope’s windage knob). With the T-Rex, I could make those holds quickly and precisely without wasting time bouncing back and forth.
Overall, I’ve come to really enjoy the repeatable confidence the T-Rex has given me whether I’m doing load development, practicing at the range, or shooting a match. So, if you’re in the market for a superb front rest that just might give you an edge or, at minimum, make your life easier, head over to TheRodzilla.com and learn all about the impressive, new T-Rex Front Rest.
* Rod Brakhage explains: “The bridge travels up and down on double-sealed ball bearings on 1” hardened shafts. My design utilizes a rack and pinion with an 18″-long drive shaft for adjusting the height of the bridge. This system allows you to stay in shooting position and looking through the scope while adjusting the vertical placement of your crosshairs. Precisely dial your vertical to the center of your target with the joy stick at the exact height you prefer. A 1/4 MOA movement is very easy to accomplish with this design. Also, there is no need to lock the bridge as there is an adjustable clutch to hold the vertical position. The long drive shaft utilizes a scalloped hand wheel on the shooters side and a quick coupling adapter on the rest side. Once adjusted you merely pull back on the drive shaft and remove it or just set it on your shooting mat out of the way. The geared rack and pinion can be placed on the right for right-handed shooters or on the left.”
Share the post "Rodzilla’s Impressive New T-Rex Front Rest — Product Review"
At the request of our readers, we provide select “Deals of the Week”. Every Sunday afternoon or Monday morning we offer our Best Bargain selections. Here are some of the best deals on firearms, hardware, reloading components, optics, and shooting accessories. Be aware that sale prices are subject to change, and once clearance inventory is sold, it’s gone for good. You snooze you lose.
1. Graf & Sons — Lapua Brass in Stock
⏺ Best brass for centerfire disciplines; get it before it sells out
More quantities of quality cartridge brass are becoming available. Grafs.com now has a large supply of Lapua brass in stock. With many of the top cartridge types available this is a great time to stock up on Lapua brass. For those who haven’t tried Lapua brass yet, it may cost a bit more, but Lapua brass can deliver multiples of useful life compared to lesser brands. With reasonable loads (and some annealing), Lapua brass can deliver 20+ load cycles for most popular cartridge types.
2. Sportsman’s WHSE — Tikka T3x Lite/Superlite Rifles on Sale
⏺ Save big on excellent hunting rifle, smooth action, nice trigger
Looking for a great hunting rifle that is reliable, accurate, and relatively lightweight? If so, check out the Tikka T3x Lite and Superlite rifles. These rifles combines high performance with light weight. They feature synthetic stocks and new modular features. Tikkas boast smooth-running actions and very good factory triggers. The T3x series features weather-resistant stocks with good grip feel even in wet conditions. The metallic bolt shroud covers and shields the firing pin and rear of the bolt body. This is a good price.
⏺ Outstanding deal on quality muffs — many color options
Every shooter should have quality ear muffs, both for yourself and any friends/family members you bring to the range. For those on a tight budget, we recommend the Walker’s Razor Slim Passive Earmuffs. These are comfortable and have a good 28dB Noise Reduction rating — very high for slim muffs. These Walker’s Razor Slims are available in a wide variety of colors, starting at just $18.38 on Amazon — a great deal. These muffs fold compactly, making them easy to stow.
4. Bruno’s Shooters Supply — BAT Actions, $100 OFF
⏺ Get a great BAT action without the wait at good price
Why wait months or years for a custom action when Bruno’s has BAT Actions in stock at attractive, $100 Off prices. Available in several finish types and multiple configurations, these ready-to-ship actions will meet the needs of any serious or casual shooter.
5. Palmetto SA — Smith & Wesson M&P Shield EZ 9mm, $449.99
⏺ Excellent CCW pistol with handy grip safety at good price
Given the high demand, it has been tough to find quality handguns for sale at a fair price. If you’re looking for a 9mm carry gun, Palmetto SA has the excellent Smith & Wesson M&P Shield EZ 9MM for just $449.99, including two 8-rd magazines. This gun is easy to rack. We like the integral grip safety. The trigger is crisp, and the pistol features an 18-degree grip angle for a natural point of aim. The Shield EZ is fitted with white-dot front and adjustable white-dot rear sights.
6. Creedmoor Sports — American Practice Bullets on SALE
⏺ Amazing deal on factory second bullets, save 50% or more
Here’s a truly great deal on quality .22 cal and .30 cal bullets. These American Practice Bullets are made by major manufacturer, but may have slight cosmetic defects — mostly visual, such as minor scratch marks on the jackets. If you can live with the slight visual defects or very slight weight variances, you can enjoy huge savings. Get 500 bullets for what you might pay for just 250 first-run projectiles. For example, 500 69gr HPBT .22-caliber bullets are only $104.95. That’s just $20.99 per hundred! And for you .308 Win/.30-06 shooters — get 500 175gr HPBT bullets for just $165.96, just $33.95 per hundred.
⏺ Excellent choice for varmint rifle at super-low price
Need a scope for your varmint rifle? Here’s a killer deal on a 5-20x44mm Bushnell Nitro. This second focal plane (SFP) scope boasts a nice reticle with MOA-based hashmarks. With this deal you can save 54% off the regular $499.99 price. For varmint hunting we think the 5-20X magnification range is just about ideal, and we prefer SFP as the reticle thickness doesn’t change as you zoom in and out, something you’ll do often on a prairie dog hunt. If you are looking for a lower-magnification scope, consider the 2.5-10x44mm Nitro for just $174.49 a $175 savings.
8. Amazon — Highwild Adjustable Target Stand Base, $32.99
⏺ Smart product with adjustable widths
The steel Highwild Adjustable Target Stand Base provides a stable base for your target frame. The base has three steel receivers for standard 1×2 wood stakes (actual size .75″x 1.5″). Base span quickly adjusts from 8″ to 24″ and width markers are stamped on the cross-beam. No tools are required to change width. With this base you can set up your own target anywhere. The entire base is powder-coated to stand up to the elements. Bonus — the 13″ X 16″ cardboard shipping box is printed with Silhouette Targets.
9. Creedmoor Sports — Cleaning Rod Guide, $24.95 – $29.95
⏺ Always use a rod guide — these are caliber-specific for best fit
Without a good bore guide, you can damage your rifle during cleaning. Bore guides keep solvents and fouling out of your action and trigger group. They also center up your rod and jags, protecting your chamber. Creedmoor Sports Cleaning Rod Guides have earned high marks. These are available in a variety of calibers/sizes to fit various actions. Use the drop-down menu on Creedmoor Sports product page to select the right size for your gun. NOTE: These Cleaning Rod Guides may be black or red, depending on current inventory.
Share the post "BargainFinder 294: AccurateShooter’s Deals of the Week"
On 5/7/21, the U.S. Attorney General signed ATF proposed rule 2021R-05, Definition of “Frame or Receiver” and Identification of Firearms. The goal of the proposed rule is to ensure the proper marking, recordkeeping, and traceability of all firearms manufactured, imported, acquired and disposed by federal firearms licensees. This proposed rule would among others, provide new or amend previous definitions of terms related to or about “firearm frame or receivers” and “frame or receivers.” SEE ATF website.
ATF requests comments on the proposed rule, Definition of “Frame or Receiver” and Identification of Firearms, from all interested persons. ATF specifically requests comments on the feasibility of implementing the new definition of firearm “frame or receiver” in 27 CFR 478.11 and 27 CFR 479.11, and related definitions and amendments that ensure the proper marking, recordkeeping, and traceability of all firearms manufactured, imported, acquired and disposed by federal firearms licensees.
ATF also requests comments on the costs or benefits of the proposed rule and on the appropriate methodology and data for calculating those costs and benefits. To submit comments CLICK HERE: Frame or Receiver Submit Comment Page
Official Summary of New Fiream Frame or Receiver Rule
You May Submit a Comment
ATF is receiving comments on the proposed rule for 90 days from the date the proposed rule is posted in the Federal Register. You may submit comments by mail, fax or the Federal eRulemaking Portal at www.regulations.gov.
Share the post "ATF Proposed Rule Will Redefine Firearm “Frame or Receiver”"
What does a three-time High Power National Champion choose for PRS comps? A set of twins. Twin rifles that is. SFC Brandon Green of the USAMU is one of America’s best marksmen. He’s excelled in Service Rifle and High Power disciplines, and now he’s getting very serious about the Precision Rifle Series (PRS). Brandon recently took delivery of “Twins” — two impressive rifles optimized for PRS competition. Green told us: “The Twins are ready for business! The silver one is a 6XC and the black one is a 6.5×47 Lapua”. Both rifles feature Impact Precision actions (with AICS-type mags), 24″ Proof stainless barrels, and Fat Bastard muzzle brakes. Rifle work was done by Stuteville Precision (Wade Stuteville) and Exodus Rifles (Joe Walls).
In the 6XC, Brandon runs Berger 105gr VLDs in Norma 6XC brass. For the 6.5×47 Lapua he shoots 140gr Berger Hybrids or 143gr Hornady ELD-Xs in Lapua brass. Both rifles have stainless steel Proof barrels, but the 6.5x47L has a matte black Cerakote finish.
Brandon loves his new Twins. He said he likes the “feel” of the guns with the Foundation stocks: “These rifles weigh around 17 pounds with optics. They feel very solid under recoil — without the ‘tuning fork’ vibration you can get with a metal-chassis gun. They feel like a good wood-stocked gun, but the material is stronger and more rigid than wood. I’ve heard that guys are having success with these Foundation stocks with the actions installed without pillars or conventional bedding.” Currently Brandon is running both guns without action-screw pillars. He did have one skim-bedded, but he doesn’t think that was really needed. “Both rifles hammer now”, Brandon tells us.
Green Runs Vortex Razor HD Gen II 4.5-27x56mm FFP scopes on both rifles:
High-Tech Micarta Stock Material
At first glance, those stocks may look like wood, but they are actually a special “Micarta” material that is strong, durable, and stable. Micarta, often used for knife handles, is a “a brand name for composites of fiberglass, carbon fiber, or other fabric in a thermosetting plastic.” The stock-maker, Foundation Stocks, says Micarta offers some distinct advantages over laminated wood or conventional fiberglass: “The solid block of material gives us a dense, homogenous material that is absent of any voids or air pockets commonly found in composite stocks. The high compression strength of the material allows us to build an action/DBM specific stock that requires no bedding or pillars. The material is very durable and stable in extreme environments. We use advanced CAD software to design and model our stocks, working in conjunction with action manufacturers and rifle builders to provide exact fitment.”
Here is a close-up of a Foundation Stock showing the distinctive Micarta texture:
Tactical Competition vs. NRA High Power Competition
Brandon says PRS competition is tough: “PRS can be pretty humbling, but it’s been a lot of fun and a great challenge. For a shooter (like me) with a Service Rifle/High Power background, the variations in stages combined with the time limits can be very challenging. And the unusual shooting positions put a new spin on things. PRS is definitely a different ball game, but I really enjoy it.”
SFC Brandon Green honored as the 2015 High Power National Champion. Brandon also won the HP Championship in 2013, and in 2018.
Life before the Twins… Here is Brandon, with his previous PRS rig, at the MasterPiece Arms Precision Rifle Shootout, a PRS event at the CORE Shooting Solutions Range in Florida:
Three-time National High Power Champion SFC Brandon Green (left above) set four new National Records at Camp Perry in 2017, when he won the Service Rifle Championship.
When He’s not Competing in PRS, Brandon Excels with his Service Rifle
This video shows SFC Brandon Green shooting his modern AR Service Rifle in the off-hand (standing), prone (2:20 time), and sitting (3:25 time) positions in competition.
SFC Brandon Green is a shooting superstar. Green won his third NRA National High Power Rifle Championship in 2018 at Camp Atterbury, Indiana. He dominated the High Power Championship cycle, finishing eight points and ten Xs ahead of his nearest competitor. Brandon also won High Power National Championships in 2015 and 2013. And in 2017 he set new records at the CMP’s National Trophy Matches at Camp Perry, winning the Service Rifle title. One of the greatest marksmen in the nation’s history, SFC Green excels at all positions, both rapid-fire and slow-fire.
Share the post "Sunday GunDay: Tactical Twins – SFC Brandon Green’s PRS Rigs"
As today is Mother’s Day 2021, here’s a story about one very special mother, Polly Tubb. Now 93 years old, Polly is notable as a very talented lady shooter who reared one of the greatest marksmen in history, David Tubb.
We expect you’ve heard of David Tubb, 11-time NRA National High Power Champion, and 6-time NRA Long Range Champion. Without question, David is one of the greatest rifle shooters who ever lived. What you may not know is that David came from a family of shooters. David’s father, George Tubb, was a nationally-ranked High Power competitor. What’s more (now this may surprise you), David’s mother “Polly” was was a great shooter in her own right. When she wasn’t rearing a future Champion, Polly was hitting the X-Ring at rifle matches.
Pauline (“Polly”) S. Tubb of Canadian, Texas, earned several rifle championships during the course of her shooting career. In this photo, Polly took a moment to appear for a photo after winning the 1962 National Woman’s Bolt Rifle championship at Camp Perry. One shooter who competed against Polly observed: “I was there as a 1962 Pennsylvania State Team junior! I remember Polly. She beat some of the best Army and Marine shooters and always did it with style and good humor.”
We spoke to David Tubb this morning. He is spending the day with his mother Polly, who remains happy and vibrant at age 93. David says Polly is still enjoying life, she still plays the piano, and she remains an inspiration to him and to all her family.
Quick Tip: Try Flipping Your Bushings
We expect you’ve heard of David Tubb, 11-time NRA National High Power Champion, and 6-time NRA Long Range Champion. Without question, David is one of the greatest rifle shooters who ever lived. What you may not know is that David came from a family of shooters. David’s father, George Tubb, was a nationally-ranked High Power competitor. What’s more (now this may surprise you), David’s mother “Polly” was was a great shooter in her own right. When she wasn’t rearing a future Champion, Polly was hitting the X-Ring at rifle matches.
ATF Proposed Rule Will Redefine Firearm “Frame or Receiver”
On 5/7/21, the U.S. Attorney General signed ATF proposed rule 2021R-05, Definition of “Frame or Receiver” and Identification of Firearms. The goal of the proposed rule is to ensure the proper marking, recordkeeping, and traceability of all firearms manufactured, imported, acquired and disposed by federal firearms licensees. This proposed rule would among others, provide new or amend previous definitions of terms related to or about “firearm frame or receivers” and “frame or receivers.” SEE ATF website.
» Download the Proposed New ATF Rule (PDF)
ATF requests comments on the proposed rule, Definition of “Frame or Receiver” and Identification of Firearms, from all interested persons. ATF specifically requests comments on the feasibility of implementing the new definition of firearm “frame or receiver” in 27 CFR 478.11 and 27 CFR 479.11, and related definitions and amendments that ensure the proper marking, recordkeeping, and traceability of all firearms manufactured, imported, acquired and disposed by federal firearms licensees.
ATF also requests comments on the costs or benefits of the proposed rule and on the appropriate methodology and data for calculating those costs and benefits. To submit comments CLICK HERE: Frame or Receiver Submit Comment Page
Official Summary of New Fiream Frame or Receiver Rule
You May Submit a Comment
ATF is receiving comments on the proposed rule for 90 days from the date the proposed rule is posted in the Federal Register. You may submit comments by mail, fax or the Federal eRulemaking Portal at www.regulations.gov.
Share the post "ATF Proposed Rule Will Redefine Firearm “Frame or Receiver”"