Budget Co-Axial Rest — The $220.99 Caldwell (Plus Upgrade)
Available for under $230.00 including front bag, the Caldwell Fire Control front rest is a very good value. It makes the co-axial, joystick design more affordable than ever. We used the Fire Control front rest when testing our Ultimate Varminter 20 Practical AR. Once we removed some sand from the tri-lobe front bag, the rest worked quite well.
| Get a Fire Control Rest for $220.99
Right now you can get the Caldwell Fire Control Front Rest for just $220.99, an 18% savings off the regular price. The $220.99 Amazon price is a great deal for guys on a tight budget who want a modern joystick-style front rest (this same Caldwell rest sells for up to $269.99 elsewhere). With the conversion described in this article, you can put together a system that works pretty darn well, and is more than adequate for many applications, including prairie-dog hunting (from a bench). Put the money saved into a nice custom, hand-lapped barrel or some bullets for your varminter. |
Upgrading Fire Control Front Rest with Sinclair Top
While most Fire Control owners are happy with the product, many have wanted to replace the tri-lobe front bag with a more conventional front bag from Protektor or Edgewood. This isn’t as easy as it looks because the width of the Fire Control top is too narrow for most standard 3″-wide front bags. On a “special order” basis, Protektor has crafted some narrower leather front bags that fit pretty well, but some shooters have decided to “upgrade” the entire front assembly.
Forum member Doug M. (aka DrJeckyl), has come up with an elegant solution that allows a Sinclair Int’l Benchrest Rest Top to be fitted to the Fire Control Rest. Doug notes: “The Caldwell Fire Control is a nice rest for the money, but it comes up short in the rest top department. The Sinclair RT-3 [or its replacement, the Gen II B/R top] fits perfect with minor modifications.” Shown below are the main components:
To adapt the Sinclair RT-3 or Gen II B/R top, Doug merely had to drill a couple holes in the RT-3 baseplate, and adapt a spacer to get the height correct: “The Caldwell factory top has a raised mounting portion so a 1/8″ piece of stock will be needed as a spacer to the flat-bottom RT-3. The spacer needs to be cut to the same length as the movable portion on the rest. And you should plan the mounting accordingly so the left thumbscrew clears the vertical height column at full left position (there is a cutaway in the rest under the thumbscrew that allows for easy access to the screw).” We labeled the photo with dimensions, but Doug cautions you should measure your own original plate to insure the drill locations are correct for your unit.
The completed installation, with the RT-3 installed on the Fire Control rest, is shown at the top of this article. Doug says it works very well. To learn more about this conversion, with Doug’s measurements for the hole-spacing and his specs on the fasteners, go to the original thread in our Shooter’s Forum. NOTE: Sinclair no longer sells the RT-3 top, but Sinclair’s $89.99 Gen II B/R top can be converted just as easily. LINK to Fire Control Rest Top Conversion Forum Thread.
Similar Posts:
- Budget Co-Axial Rest — The $200 Caldwell (Plus Upgrade)
- Upgrade for Caldwell Fire Control Joystick Front Rest
- Top Conversion for Caldwell 'Fire Control' Joystick Front Rest
- Caldwell 'Fire Control' Joystick Rest on Sale
- Heavy Caldwell Pedestal Rest on Sale at Cabela’s for $129.99
Share the post "Budget Co-Axial Rest — The $220.99 Caldwell (Plus Upgrade)"
Tags: Benchrest, Caldwell Rest, Co-Axial Rest, Fire Control, Front Bag, Joystick Rest, Sinclair Int'l
I and my Aussy friend both have these rests. We modified them with a cabinet scraper bearing surface and replaced adj. screws with drilled Allen screws with sprung bronze mushrooms.
I later bought a Sinclair but the green-meanie still works as well!