Is factory 6.5 Creedmoor ammunition good enough to win a PRS or NRL competition? The answer is a resounding “YES” if we’re talking about Berger ammunition. Produced with Berger match bullets and premium Lapua brass, this Berger 6.5 ammunition demonstrated excellent accuracy, impressive velocity, and very good ES/SD numbers. When tested at 1000 yards with an MPA-stocked PRS rig with Rem 700 action, this ammo showed just half-MOA of vertical, and produced a group that would have been a 50-1X in F-Class competition. That’s quite impressive for a PRS rig.
This ammo test was performed by our friend Erik Cortina from Texas. Erik is a top F-Class competitor who also shoots tactical matches (for fun and glory). Erik recently built a new 6.5 Creedmoor with a Remington 700 action. Though this rifle sports a top-shelf MPA chassis and premium Kahles scope, Erik calls this his “budget build” because it has a plain Rem 700 factory action rather than the elite Borden actions he normally runs. Erik’s actions of choice are the Borden Mountaineer for PRS and Borden BRM-XD for F-Class.
Erik posted: “Shot my budget 6.5 Creedmoor today with Berger Bullets factory ammo. I shot five rounds over the chrono to get speed. I used BC info from the box and it all lined up properly. I adjusted my ECTuner to tune load and it took just 15 shots to get it shooting well. It’s simple with good components.”
This Berger factory ammo features Berger 130gr Hybrid OTM Tactical bullets. The Lapua 6.5 Creedmoor cases have a large rifle primer. You can see this ammo displays good velocity with Extreme Spread and Standard Deviation rivaling good hand-loads.
Cortina says the very accurate Brux barrel and razor-sharp 6-24x56mm Kahles scope help achieve this kind of outstanding performance at 1000 yards. Here are the key components for Erik’s latest PRS rig:
Barrel Tuner by Erik Cortina — Fits Behind Muzzle Brake
This rifle features a barrel tuner designed and crafted by Erik Cortina. You can the ECTuner alone, or, as you can see, the ECTuner can be fitted BEHIND a muzzle brake. Erik tells us: “The ECTuner allowed me to tune the barrel to my ammo rather than tuning the ammo for barrel as is done when reloading. With the tuner, there is no need to try different brands of ammo as they can all be tuned to shoot as good as possible in my rifle.”
MPA Chassis Configuration Guide
Erik’s “budget” PRS rifle employs a MasterPiece Arms (MPA) BA Competition Chassis with Rapid Adjustment Technology (RAT). This MPA Arms Video shows how to set up an MPA Chassis to suit the owner:
Story by Paula Crenshaw
We like air rifles both for fun shooting and for competition. However, so many options are now available that is easy to get overwhelmed with the choices. Thankfully, there is a good book that helps air rifle shooters make informed decisions about air guns and accessories. Steve Markwith’s comprehensive resource, Air Rifles: A Buyer’s and Shooter’s Guide offers a wealth of useful information. This 154-page book is now available for $12.95 (paperback) or $9.95 (Kindle).
“This is a very informative book explaining the ins and outs of air rifles, their capabilities and limitations. I highly recommend this book to anyone considering purchasing an air rifle for marksmanship practice or small game hunting.” – L. Stanek, Verified Amazon Reviewer
Read Free Sample Chapters Online
If you go to Amazon.com and click on the cover of this book, you can view a FREE preview with extensive samples from many chapters. The book covers all the most important types of air rifle systems, both pre-charged pneumatics and other self-charging guns. Markwith reviews the wide variety of pellets available, offering suggestions for particular applications. You’ll also find a useful discussion of Airgun Power, Range, and Accuracy. This will help you pick the right air rifle.
Markwith explains the many attractions of airguns. They are not considered firearms (in most jurisdictions) so they can be purchased at local shops or mail-order outlets without FFL fees or background checks. You’ll find a huge online selection of airguns at PyramydAir.com that can ship direct to you — no FFL required. Air rifles are also quiet and very inexpensive to shoot. While .177 and .22 caliber air rifles are most common, there are also larger-caliber airguns offered for hunting or special applications.
Pyramyd Air has dozens of helpful videos about air rifles and air pistols.
Capstone is a respected company that represents world-class ammunition, powder, and component manufacturers Berger, Lapua, Vihtavuori, and SK. At SHOT Show 2022, Capstone showcased new products from all these brands. Here are summaries of the new-for-2022 products from Lapua and SK.
New Lapua Cartridge Brass:
6.5 PRC, .284 Win, .300 PRC, .300 Win Mag
Lapua cartridge brass sets the standard by which quality brass is measured. You will see Lapua brass used by top competitors for all accuracy-oriented disciplines: Benchrest for Score, Benchrest for Group, 1000-Yard Benchrest, F-Class (Open and F-TR), Palma, Service Rifle, Silhouette. And Lapua brass is also favored by varmint hunters who load their own ammo. In 2021 and 2022 Lapua has rolled out new types of top-grade cartrige barss. New offerings available now for 6.5 PRC, .284 Winchester, .300 PRC, and .300 Winchester Magnum. All are available and shipping now.
New Lapua Centerfire Match Ammunition
Lapua produces some of the finest, most accurate factory-loaded centerfire ammunition in the world. We have shot Lapua 90gr 6mmBR ammo that produced verified groups well under quarter-MOA. that’s remarkable for factory-loaded ammo that has not been tuned for a particular rifle. For 2022, Lapua has added three new match loads that promise great consistency and accuracy. For 2022, Lapua has added 6.5 Creedmoor 136 Grain Scenar-L, .260 Remington 136 Grain Scenar-L, and .300 Winchester Magnum 185 Grain Scenar OTM, to Lapua’s highly successful Scenar Match Target ammunition line.
SK High-Velocity Match Rimfire Ammunitions
SK is owned by the same parent company as Lapua. SK now offers an extremely accurate, High-Velocity round. For 2022 SK will offer High-Velocity Match .22 LR ammunition. This new SK ammo pushes a 40gr round-nose projectile at a very fast 1,263 FPS muzzle velocity. This high-velocity SK ammunition should work well for PRS/NRL22 matches and long-range rimfire events, some of which have targets out to 300 meters. The new SK High-Velocity Match ammo employs a proprietary clean-burning and high-energy propellant for reliable function in all platforms — shot after shot.
In the video below, Forum member (and F-Class ace) Erik Cortina shows how to install a Jewell Benchrest trigger into a Kelbly F-Class Panda action. You could follow the same simple procedure to install a Jewell in a standard Panda action. Kelbly’s sells both standard and long versions of the F-Class Panda action. Both versions feature integral recoil lugs in the front.
To see more detail in this “how-to” video, you can zoom it to full-screen size. Simply click the full-screen icon (4-cornered frame) just to the right of the YouTube logo in the lower right.
Rimfire Varmint Adventure
Can you shoot prairie dogs with a .22 LR Rifle? The answer is yes, if you have an accurate rifle, know your drops, and keep your targets within a reasonable distance (inside 240 yards). While the .17 HMR and .17 WSM are much more potent, flat-shooting, and effective P-dog slayers, a talented marksman CAN get good results with a .22 LR rimfire rifle, as ace PRS shooter and gunsmith Jim See recently proved.
Posting on his Facebook Page on 7/9/2020, Jim wrote: “Took out the .22 LR for some LR prairie poodles, there were not many in this town, but it gave me a chance to get some impressive hits. Norma TAC-22 ammo put the smack down on a first-round hit, called head shots at 189 yards. The body-shot dog was a first-round kill at 240 yards. I had one more head shot with a second round hit at 163. The nice part about using the .22 Long Rifle ammo is the [critters] don’t spook too bad, so a follow-up shot with a correction is usually available to get a better wind hold.” Even unsuppressed, a .22 LR rimfire shot makes much less noise than a centerfire round.
NOTE: The Norma TAC-22 .22 LR ammo used by Jim See offers great bang for the buck. It is quite affordable — a 50rd box is just $4.50 at Palmetto State Armory. Some lots have show outstanding accuracy. These target photos (below) come from Champion Shooters Supply which may have gotten an exceptional lot. This vendor tells us: “We have found this to run very well in Ruger rifles, handguns, and target pistols. These are 5-shot groups at 50 yards with an Anschutz 1913 rifle. This is an incredible value.” Jim says the TAC-22 ammo delivers 1″ groups at 100 yards in his rifle.
Sierra Bullets has introduced a new line of loaded centerfire varmint ammunition, the Prairie Enemy series of cartridges. Sierra currently offers Prairie Enemy ammo for six cartridge types: .204 Ruger, .223 Rem, .224 Valkyrie, .22-250 Rem, .243 Win, and 6.5 Creedmoor. To celebrate this new ammo line, Sierra created a colorful Prairie Enemy P-Dog target. Click the image below to download the PDF target.
Want to shoot better scores at your next match? Here’s a smart, inexpensive do-it-yourself project from the good folks at Criterion Barrels. For less than a dollar or two in materials, in just a few minutes you can create a handy, effective mirage shield, custom-fitted to your favorite rifle.
All precision shooters should be familiar with mirage, a form of optical distortion caused primarily by variations in air temperature. Savvy shooters will use mirage as a valuable tool when gauging wind speed and direction. Natural mirage is unavoidable, but there are many techniques designed to limit its influence in long-range marksmanship.
A form of mirage can be produced by the barrel itself. Heat rising from the barrel may distort sight picture through your optics, leading to erratic results. Mirage caused by barrel heat can be reduced dramatically by a simple, light-weight mirage shield.
How to Make a Mirage Shield
A mirage shield is an extremely cost-effective way to eliminate a commonly-encountered problem. Making your own mirage shield is easy. Using old venetian blind strips and common household materials and tools, you can construct your own mirage shield for under one dollar.
Materials Required:
1. Vertical PVC Venetian blind panel
2. Three 1”x1” pieces adhesive-backed Velcro
3. Ruler or tape measure
4. Scissors or box cutter
5. Pencil or marker
1. Measure the distance from the end of the receiver or rail to the crown of the barrel.
2. Using a pencil and ruler, measure the same distance and mark an even line across the blind.
3. Cut across the line using scissors or a box cutter, shortening the blind to the required length. (Remember, measure twice, cut once!)
4. Expose the adhesive backing on the loop side of the Velcro. Center and apply the Velcro strips on the barrel at regular intervals.
5. Expose the adhesive backing of the fuzzy side of the Velcro.
6. Place the blind on the upper side of the barrel. Apply downward pressure. Once the Velcro has secured itself to the barrel, separate the two sides. Proceed to mold both sides of the Velcro to fit the contour of their respective surfaces.
7. Reaffix the blind. Barrel related mirage is now a thing of the past!
NOTE: You can attach the Velcro on the opposite side of the blind if you want the blind to curve upwards. Some folks thinks that aids barrel cooling — it’s worth a try.
How to Remove and Re-Attach the Mirage Shield
Removal of your mirage shield is accomplished by simply removing the blind. You can un-install the Velcro by pulling off the strips and then gently removing any adhesive residue left behind using an appropriate solvent. (Simple cooking oil may do the job.) Caution: With fine, high-polish blued barrels, test any solvent on a non-visible section of the barrel. Before storing the gun, re-oil the barrel to remove active solvents and residual fingerprints.
We are coming into peak Prairie Dog season. For long shots you’ll definitely want a centerfire. We like the 20 Practical in an AR and a 22 BR/BRA in a bolt-action. That will have you covered out to 700 yards. But for shorter shots on small critters — say inside 150 yards — it makes sense to have an accurate 17 HMR rimfire rig. Today’s 17 HMRs are capable of surprising accuracy, rivaling a good centerfire rig, but with way less recoil and much lower cost per shot. And the 17 HMR offers more than double the velocity of a .22 LR — up to 2650 fps with a 17-grain bullet.
Top Shot former Champion Dustin Ellerman likes his Volquartsens, and we can see why. With one of his favorite 17 HMR rimfire varmint rigs, he’s seen some outstanding accuracy with CCI ammo. A few seasons back, on his Facebook page, Dustin reported: “Prepping for prairie dogs and I’m floored by this cold, sub-half-inch group shot with the Volquartsen Custom 17 HMR at 100 yards.” This thumbhole-stock rifle features a Bowers Group USS suppressor, and 3-12x56mm Meopta Scope. Dustin tried different types of CCI 17 HMR ammo. This small group was shot with CCI A17 ammo.
What’s the effective range of a 17 HMR on prairie dogs? You might be surprised. in 2015, Dustin took another Volquartsen 17 HMR on a Prairie Dog hunt in Wyoming. He was impressed with the rifle (shown below) and the little rimfire cartridge. Dustin says the effective range of the 17 HMR is farther than one might expect: “I made hits out to 300 yards. 200 yards was easy as long as the wind wasn’t too bad.”
Here’s the Volquartsen 17 HMR Dustin used in Wyoming in 2015:
After that 2015 P-Dog expedition, Dustin became a fan of the 17 HMR cartridge: “Never paid it much attention before now because the ammo is five times more expensive than .22 LR and I mostly target shoot. However, for prairie dogs, the 17 HMR is amazing!” Consider this — Hornady’s 17 HMR ammo pushes a 17gr V-Max bullet at 2550 fps, twice as fast as typical .22 LR rounds.
Prairie Dog Adventure with Savage A17
This video shows a successful Prairie Dog hunt. Watch and you’ll see hits out to 160 yards (00:50), proving the effective range of the 17 HMR cartridge. The host is shooting a Savage A17 semi-auto 17 HMR rifle in a Boyds laminated stock.
Sightron is now offering big discounts on popular scopes with its Summer Instant Savings Promotion. You can save up to $200.00 on select premium riflescopes: the S-TAC, SIII PLR, and S30 RDS. With Father’s Day and graduation just around the corner, now is a great time to save hundreds on some of Sightron’s most popular models. This instant rebate promotion kicked off May 1st and runs through June 30, 2022.
You can get these Sightron deals through an an authorized Sightron retailer, such as Creedmoor Sports, or you can order direct from Sightron, via the Summer Instant Savings Page.
SIGHTRON is offering up to $200 in savings on select premium riflescopes:
Save $200 on SIII PLR (Precision Long Range) — Designed for long-range target and competition shooting, the PLR series offers 6-24x50mm, 8-32x56mm, and 10-50x60mm models (shown below). All models employ a new optical design, Zact-7 Plus Revcoat multicoating technology, internal zero-stop, and illuminated reticles. Sightron SIII PLR scopes offer premium performance at an unbeatable price.
Save up to $120 on S-TAC — Excellent choice for hunting or competitive shooting, the S-TAC 3-16×42 and 4-12×50 riflescopes have the features you need to get on target and stay there. Available in SFP and FFP models, the S-TAC series features Zact-7 Revcoat multicoating technology applied to high-quality Japanese precision-ground glass for excellent, crisp, and clear color-corrected images.
Lifetime Warranty on All Sightron Scopes
All Sightron riflescopes are backed by a Lifetime Performance Guarantee that protects buyers. If you ever have an issue, Sightron’s skilled technicians will fix your scope or Sightron will replace it.
We have all been there — you place a piece of tumbled brass in the shell-holder of your press, raise it into the die, and suddenly it is like somebody hit the brakes. The case is stuck in the die. Your first instinct is to reverse it out. You crank on the handle, and BANG! The rim rips off the case head and you are looking at a piece of brass stuck in the die.
A stuck case is one of the boo-boos that all of us reloaders have faced from time to time. If proper lubrication is applied, then it should not be a problem. No matter if you are a seasoned reloader or new to it, this situation can happen. Take your time, use the proper procedures, and you will be back in business in no time! This article explains how to avoid stuck cases (through proper lubrication) and how to use a stuck case removal system.
What Causes Stuck Cases
One of the first common mistakes reloaders face is the stuck case. It can be caused by too much or too little lube. Too much and a vacuum can be formed causing the case to become suctioned into the die. Too little lube and friction is the culprit. So what is the cure? There is no exact cure, but the best lube that we have found so far is just a dab of Imperial Sizing Die Wax on your fingers and applied in a thin coat on the body of the case, not the shoulder or neck. Too much of this wax can cause the vacuum effect, or can eventually load your die up with gobs of residue. If it is applied to the shoulder area, or the leftover wax moves up into the shoulder region of the die, you will see dents or dimples in the shoulder. [AccurateShooter.com Editor’s Note: For normal full-length sizing of small cases such as 220 Russian/PPC, 6mmBR, 6.5 Grendel, or 6.5×47 Lapua we recommend Ballistol (aerosol) lube. It is very slippery, goes on very thin, and does not gum up the die.]
A great way to ensure that your dies are clean is to use a simple chamber mop with a dab of your favorite solvent on it and clean out the die. Be sure all of the solvent is out after cleaning by spraying the die out with Quickscrub III or use a clean chamber mop. If you are storing your dies, you can apply a thin coat of a good oil to protect the steel such as TM oil or Starrett M1 Spray.
This video shows how to use an RCBS Stuck Case Removal Kit:
Using a Stuck Case Removal Kit
If you do stick a case in your die there are a few good stuck case removal kits available. Each one works in a similar fashion. I have found the Hornady kit very effective and easy to use. [Editor: Forster, Lyman, and RCBS also make good kits for removing a case stuck in a die.]
Basically what you do is remove the die from the press. Unscrew the decapping assembly and pull it out as far as you can. You then need to drill/tap threads into the stuck case head (this is why it is suggested to unscrew the decapping assembly as far as you can to get it clear of the drill bits). Once this is done screw the die back into the press. You then install the included shellholder attachment on the shellholder ram, and thread it into the case via a small wrench. With some elbow grease you can reverse the stuck case out of the die with the leverage of the press, and not damage the die.
However if the case is stuck… REALLY stuck, you may pull out the threads on the case and you are still left with a stuck case in the die without any way to pull it out. If the case is really difficult to remove even with the use of a stuck case removal kit, do not try to be Hercules with the press ram. Here is a trick that may work. Take the die with the stuck case and place it in your freezer for a couple of hours. Then repeat the removal with the cold die. The freezing temperatures may cause the brass to contract, and make removal easier. If this does not work it is recommended to send it to the die manufacturer. They will be able to remove the case without damaging the die.
Another fix if you can remove the decapping assembly completely is to use a tap hammer and a punch or small wooden dowel to knock the stuck case out. This isn’t the best way since it is very possible that you will damage the die internally or externally on the threads, or both. Send the die to the manufacturer to have this done properly. You will be happier in the long run.
This article appears courtesy Sinclair International. It first appeared in Sinclair’s Reloading Press Blog.
At the request of our readers, we provide select “Deals of the Week”. Every Sunday afternoon or Monday morning we offer our Best Bargain selections. Here are some of the best deals on firearms, hardware, reloading components, optics, and shooting accessories. Be aware that sale prices are subject to change, and once clearance inventory is sold, it’s gone for good. You snooze you lose.
1. Bullet Central — Krieger and Bartlein Pre-Fit Barrels
⏺ Great quality pre-fit barrels, ready to mount to your rifle
Do you own a Kelbly, BAT, or Impact action and need a new barrel but don’t want the hassle (and cost) of having a smith chamber and headspace the barrel? Consider a Krieger or Bartlein Pre-Fit Barrel from Bullet Central. On BulletCentral.com you’ll find a wide range of barrels in various calibers for multiple action types. Place your order for professionally-chambered, custom-grade barrels that you can install yourself.
2. Precision Reloading — All L.E. Wilson Products SALE
⏺ Very good prices on L.E. Wilson dies, case trimmers, and tools
Right now, Precision Reloading is running a good promotion with all in-stock L.E. Wilson products on SALE. This sale currently includes the popular Wilson inline seating dies, FL sizing dies, case trimmers, expanding die (with mandrel), bushings, case gages, deburrers, and other tools.
⏺ Great starting choice for tactical and PRS/NRL disciplines
Interested in PRS/NRL and other tactical disciplines, but don’t want to spend a fortune on optics? The Vortex Venom 5-25x56mm FFP (First Focal Plane) optic is a smart choice. Offered in both MOA and MIL versions, the Vortex Venom ($699.99 MSRP) can be purchased right now for $499.99 from EuroOptic.com. Choose either the MOA model or MRAD version. Vortex claims the new Venom allows new tactical shooters to “get into the game at an affordable price without compromising optical quality”. The Venom boasts a 34mm main tube with 85 MOA elevation for the MOA version, or 25 MRAD elevation for the MIL version.
4. CDNN/LNL — EAA Girsan 9mm Pistols, $429.99 or $485.26
⏺ Choose 4.2″ bbl MC9BX or 4.6″ bbl ported slide MC9 model
CDNN Sports has a great deal on the EAA Girsan MC9BX pistol — just $429.99 complete with installed Red Dot optic and threaded muzzle (for a suppressor). This is a good 9mm defensive pistol with 4.2″ barrel and 17-round magazine. If you compete in IDPA or action pistol matches, you may prefer the deluxe EAA Girsan MC9 Model. This features a longer, ported slide, 4.6″ barrel, and flared mag well. The makes the MC9 better for competition. It is offered for $485.26 at Locked & Loaded, a $195+ savings over the regular $681.00 pistol price.
⏺ Get ready for varmint season with 500-count packs of V-Max bullets
Do you have a favorite varmint rifle chambered in .223 Rem, 22 BR, or 22-250? If you’re planning to load hundreds of rounds for an upcoming varmint safari, you can save big right now at Midsouth. Buy in bulk for super savings. Get 500 50gr .224 V-Max bullets for just $102.99 — that works out to just $21.60 per hundred. Or if you want a little higher BC, order 500 60gr .224 V-Max for $105.49. Both are great deals. These V-Max bullets are ideal for varmint work. Midsouth also has 110gr .270 Caliber V-Maxs on sale.
⏺ Sturdy bench has large top, comfy seat, and swivels 360 degrees.
Here’s a great portable bench you can use in the field while shooting prairie dogs or other varmints. Or use this when practicing on a undeveloped shooting range. Now $160.99 on Amazon, Birchwood Casey Xtreme Shooting bench swivels 360 degrees and has a large, comfortable seat with removeable backrest. Weighing a moderate 46 pounds, this shooting bench boasts a large, 29″ square top with a removable rifle support. This bench, which sells for $180 elsewhere, has earned many positive reviews: “Hands down and far away the sturdiest portable shooting bench I have ever used. It is portable but not exactly light but that is why I bought it. The light benches feel cheap and are not sturdy…”, “It doesn’t feel flimsy or wobble like similarly-priced benches. Overall it’s a great bench!”. The bench includes cup-holder and gear basket.
7. Palmetto State Armory — Norma TAC-22 Ammo, $4.50/box
⏺ Excellent rimfire ammo at a GREAT price — .22 LR Deal of the Year
We are repeating this deal from last week because it’s quality .22 LR ammo at a GREAT price, and it could sell out soon. If you shoot NRL22 or just practice for fun, grab some Norma TAC22 .22 LR ammo at Palmetto State Armory. On sale at just $4.50 per 50-round box (just $0.09/rd), this TAC-22 ammo is a truly spectacular bargain.
Norma TAC-22 accuracy with an older lot from 2017. Photo from Champion Shooters Supply.
Norma TAC-22 is good quality ammo that has shown excellent accuracy in tests (see photo). You’ll have to pay twice as much (or more) to get more accurate rimfire ammo.
8. Amazon — Frankford Arsenal Quick-N-EZ Tumbler Kit, $75.53
⏺ Great price on complete kit with tumbler, separator, and media
This Quick-N-EZ Master Tumbler Kit contains everything you need to tumble rifle or pistol brass. Now on sale for $75.53, this Kit contains: Vibratory Tumbler, Rotary Media Separator, Plastic Bucket, 3 lbs. Cleaning Media, and 4 oz. Brass Polish. At $75.53 this is a fine deal — you could easily pay more than that for a decent vibratory tumbler alone. Other vendors are charging $100 (or more) for this full kit.
9. Amazon — Smart Weigh Gem20 Digital Scale, $21.99
⏺ Great little accurate, repeatable scale at amazing price — Watch the VIDEO!
The Smart Weigh Gem20 scale is an excellent option for those looking to reduce velocity Extreme Spread by weighing powder precisely to the kernel, without having to spend $1000 on a laboratory grade scale. At this low price (under $22 currently), this is also great option as a back-up or travel scale used at the range. Verified purchasers, including the maker of the video above, have praised the scale. Watch the video to see how precise it is — the scale can measure kernel by kernel. Use the “mode” button to select grains. The scale can also weight in grams, ounces, and other modes. Use the tare function to zero with powder pan. This scale ships with two 10g calibration weights.
10. Midsouth — Forster Accu-Ring, $14.99
⏺ Unique precision-marked lock ring helps quickly set shoulder “bump”.
The new Forster Accu-Ring has precise markings so you can set your sizing dies with extreme precision. The Accu-Ring makes setting up your sizing die easier by providing laser-etched precision markings in one-thousandth of an inch increments (.001″). This allows you to more easily set the amount of sizing and shoulder “bump” you get when you move a die up or down in your press. In addition, if you have a conventional seating die without a micrometer adjustment, this new Forster Accu-Ring can help you achieve more precise bullet seating. SEE Ultimate Reloader Review.
Cortina says the very accurate Brux barrel and razor-sharp 6-24x56mm Kahles scope help achieve this kind of outstanding performance at 1000 yards. Here are the key components for Erik’s latest PRS rig:
New Lapua Cartridge Brass:
Rimfire Varmint Adventure
A stuck case is one of the boo-boos that all of us reloaders have faced from time to time. If proper lubrication is applied, then it should not be a problem. No matter if you are a seasoned reloader or new to it, this situation can happen. Take your time, use the proper procedures, and you will be back in business in no time! This article explains how to avoid stuck cases (through proper lubrication) and how to use a stuck case removal system.
