Weakside Bolt Placement — When and Why It Works
Most bolt-action rifle shooters work the bolt with their trigger-pulling hand. This is because most rifles sold to right-handed shooters come with right-side bolts, while “lefty” rifles come with left-side bolts. This “standard” configuration requires the shooter to take his dominant, trigger-pulling hand off the stock to cycle the bolt, then re-position his hand on the stock, and “re-claim” the trigger. Often the shooter must lift or move his head to work the bolt, and that also requires him to re-establish his cheek weld after each and every shot. Not good.
This really doesn’t make much sense for precision shooting with fore-end support*. There is a better way. If you leave your trigger hand in position and work the bolt (and feed rounds) with the opposite hand, then you don’t need to shift grip and head position with each shot. All this requires is a weakside-placed bolt, i.e. a left bolt for a right-handed shooter or a right bolt for a left-handed shooter. The video below shows a “Lefty” working a right bolt. Note how efficient this is:
As our friend Boyd Allen explains: “If you think about it, if you are going to work with a factory action where your options are left bolt and left port or right bolt and right port, and you are building a rifle that will only be shot from a rest, using the left/left for a RH shooter or using a right/right for a LH shooter works better than the conventional configuration”.
Shoot Like a Champ and Work the Bolt with Your Weakside Hand
Derek Rodgers, the reigning F-TR World Champion and the only person to have won BOTH F-Open and F-TR U.S. National Championships plus the King of 2 Miles Match, runs this kind of “opposite” bolt set-up. Yep, Derek shoots right-handed with a left bolt. Though Derek is a right-hander, he shoots with a Left Bolt/Left Port (LBLP) action. He pulls the trigger with his right index finger, while working the left-side bolt with his left (weakside) hand. This allows him to stay in position, and maintain his cheekweld. He places his right hand on the grip, while manipulating the bolt (and feeding rounds) with his non-trigger-pulling hand.
Recent F-TR World Champion and King of 2 Miles Derek Rodgers
This is the rifle with which Derek won the 2013 F-TR National Championship.
*For true standing, off-hand shooting (whether in competition or on a hunt), a conventional strongside bolt placement makes sense, since the non-dominant arm must support the front of the rifle all the time. When shooting from bipod or rest, it’s a different story.
Similar Posts:
- Benefits of Weakside Bolt Placement — For F-Class and Benchrest
- Weakside Bolt Placement Benefits for Benchrest and F-Class
- Weakside Bolt Placement — The Competitive Advantages
- Bolt Configuration: The Benefits of Weakside Bolt Placement
- Switch Your Bolt Side and Shoot Better from Prone and Bench
Tags: Derek Rodgers, F-Open, F-TR, Offside Shooting, Opposite Hand, Weakside Bolt
>> Using the left/left for a RH shooter or using a right/right for a LH shooter works better than the conventional configuration.
That sounds “right” to me.
Lefty
It does work as claimed . I have a Kelby Panda action TR in Left / Left set-up , and as they said in the article , I’m a right-handed shooter & virtually never take my right hand off after taking initial “hold” .For those who have never tried this set-up , once you get comfortable with it , you will not want to go back .
Saint Happening without forearm support.
Mike v