Eurooptic vortex burris nightforce sale




teslong borescope digital camera barrel monitor


As an Amazon Associate, this site earns a commission from Amazon sales.









February 28th, 2023

How to Use a Kestrel with Applied Ballistics Software

Kestrel Wind Meter F-Class John Applied Ballistics

Kestrel wind and weather meters are often regarded as the best on the market — for good reason. Here are a series of three videos by F-Class John that show how the Kestrel 5700 with Elite Ballistics works. This article reviews the advanced Kestrel 5700 Elite Wind Meter with sophisticated ballistics capabilities. Our review features three videos by F-Class John that show how the Kestrel 5700 Elite functions with Applied Ballistics APP software and LiNK connection.

Kestrel Wind Meter F-Class John Applied Ballistics

This Part I Video starts with a basic Kestrel Anemometer (blue case, 00:00-00:40) wind meter. Then reviewer F-Class John looks at the “smart” Kestrel 5700 with Elite Ballistics. John explains the many features of the Kestrel 5700 and how it holds a powerful ballistics calculator in the convenient, easy-to-tote Kestrel package. With Elite Ballistics, once you enter data about your bullets, velocity, zero, and rifle, the Kestrel can calculate come-ups and wind corrections. If you don’t yet own a Kestrel, we highly recommend you watch this series of videos that explains advanced Kestrel features in detail.

This Part II Video shows the key features of the advanced software APP used by the Kestrel 5700 unit with Elite Ballistics. The Kestrel 5700 can “talk” to a mobile device that runs the Applied Ballistics software APP that contains bullet databases and allows you to enter key information such as muzzle velocity, bullet BC, zero distance, velocity, wind, and environmental factors (altitude, temperature etc.). There are also gun-specific factors such as scope height over bore and barrel twist rate. The video also explains how “range cards” are created and how to view them with your Elite Ballistics-enabled Kestrel. John notes: “The APP is great because you don’t have to fiddle with the Kestrel’s buttons. It’s much easier to enter data and change settings with the APP.”

This Part III video shows how to determine true wind direction by aligning the SIDE of the unit into the wind. You essentially want to set the unit 90 degrees to the wind direction so the impeller runs as slowly as possible. Then, after you set your target distance (See 3:03), the unit can give you precise come-ups for your intended target (10.28 MOA for 559 yards here). The Kestrel then calculates the cross-wind correction as well (See 3:12).

DISCLAIMER: This video and description contains affiliate links, which means that if you click on one of the product links, the video author may receive a small commission. This helps support F-Class John’s YouTube channel and allows him to continue to make videos like this.

Permalink - Videos, Bullets, Brass, Ammo, Gear Review, Tech Tip No Comments »
February 28th, 2023

Great American Outdoor Show Draws Over 200,000 Attendees

great american outdoor shot pennsylvania 2023

It’s good to see we are moving back to normalcy in the post-pandemic era. Witness the Great American Outdoor Show (GAOS). This big NRA event in Pennsylvania drew over 200,000 attendees, an increase of over 35,000 from last year.

great american outdoor shot pennsylvania 2023

NRA publication Shooting Sports USA reports: “More than 200,000 people packed the exhibit halls at this year’s NRA Great American Outdoor Show, held at the Pennsylvania Farm Show Complex and Expo Center in Harrisburg, PA, from February 4-12. Our nation’s hunting and outdoor heritage was on full display, as more than 1,000 exhibitors covered 650,000 square-feet to present the latest and greatest in products, gear and technologies, as well as booking once-in-a-lifetime hunts and fishing trips in America and abroad.

The 200,000 attendees at GAOS in 2023 mark a 35,000 improvement over last year’s total. Throughout the nine-day show, leading outdoors experts conducted more than 200 educational seminars and demonstrations on a variety of topics including hunting, fishing, trapping, self-defense tactics, and wild game cooking.”

great american outdoor shot pennsylvania 2023

First-Hand Detailed Report of GAOS on American Hunter

Want to know what it’s really like to visit the Great American Outdoor Show? David Herman posted a detailed 1360-word report on the American Hunter website. With many photos and a full event time-line, this report covers all aspects of the event — from new gun displays, to hunting seminars, to a meat butchering and cooking exhibition. CLICK HERE to read full story on AmericanHunter.org.

“Overwhelmed. This was the first word that came to mind as I trundled down the long hallway connecting the Shooting Sports Exhibit Hall to the rest of the sprawling show. Before grabbing a map, I had foolishly thought the Shooting Sports hall was all there was; I had never been more wrong. There were still eight halls to go, not counting arenas and packed hallways. As I wound my way through the labyrinthine tangle of vendors, outfitters, boats, campers, spreadable bacon, and everything in between, the constant appearance of friendly faces … beckoned ever deeper into the event, until eventually I understood exactly what makes this place an outdoorsman’s Mecca year after year.” — David Herman

great american outdoor shot pennsylvania 2023

Permalink Hunting/Varminting, News, Shooting Skills 1 Comment »
February 27th, 2023

BargainFinder 388: AccurateShooter’s Deals of the Week

AccurateShooter Deals of the Week Weekly Bargain Finder Sale Discount Savings

At the request of our readers, we provide select “Deals of the Week”. Every Sunday afternoon or Monday morning we offer our Best Bargain selections. Here are some of the best deals on firearms, hardware, reloading components, optics, and shooting accessories. Be aware that sale prices are subject to change, and once clearance inventory is sold, it’s gone for good. You snooze you lose.

NOTE: All listed products are for sale to persons 18 years of age or older. No products are intended for use by minors.

1. Palmetto SA — S&W M&P 9mm Shield Bundle, $374.99

sw pistol sale
Great value Bundle PLUS $75 S&W Factory Rebate

S&W makes some great firearms and one of their best values is the M&P 9mm M2.0 pistol. With this multi-item BUNDLE you get the M&P Shield M2.0 9mm plus a cleaning kit, range bag, and tactical knife — all for $374.99. On top of that, S&W offers a $75 Rebate on this pistol. That lowers your net cost to just $299.99!

2. MidwayUSA — Vortex 20-60x60mm Spotting Scope, $249.99

vortex scope sale
Great spotting scope for the price with rock-solid warranty

Having a quality spotting scope can help when in the field, at matches, or just having fun at the range. We found a great deal on the Vortex Diamondback 20-60x60mm spotting scope, now just $249.99 at MidwayUSA. This spotting scope has good light transmission throughout the magnification range. Sharpness is good, and the spotting scope’s construction stands up to rough use in the field. This spotter is protected by Vortex’s VIP Unlimited Lifetime Warranty. If you need a bigger objective, MidwayUSA also has the 20-60x80mm version for $324.99.

3. Brownell’s — LEE Breechlock Kit, $157.50 with Discount Code

lee press sale
Get a complete reloading kit for less than the cost of a single-stage press

Would you like to grab a complete reloading setup for under $200? Brownells offers the Lee Breechlock Press Package for a low $174.99 price. But it gets better — enter Brownells 10% Off codes TA10 or WLS10 at checkout to bring the price down to a crazy low $157.50 (before tax/shipping). This is a great deal on a complete reloading package with all the essentials — Press, Powder Measure, Scale, Priming Tool, Chamfer Tool, Shellholders, and more.

4. Amazon — HQA TSA-Approved Rifle Case, $109.99

rifle case sale
Very rugged, full-featured TSA-approved roller case

Whether flying or just transporting your rifles to the range it’s important to protect them with a rugged, quality gun case. The solidly-built HQ ISSUE 41″ Tactical Rifle Case meets all the TSA requirements and can withstand tough treatment. Offered in two colors — Flat Dark Earth and Gray — this case has rollers to ease movement through the airport. Handy pick-n-pluck foam allows a secure custom fit for your firearms. NOTE: This case is 41″ overall so it will NOT fit long-barrel competition rifles unless the action is separated from the stock/chassis. For larger rifles, one good option is the Eylar 53″ Protective Roller Rifle Hard Case priced at $199.99.

5. Graf’s — Frankford Arsenal Trimmer, $69.99

frankford arsenal sale
Adjustable collet for all case sizes — strong user reviews

The nicely-crafted Frankford Arsenal Universal Precision Trimmer is a versatile tool that can work with most popular cartridge types. This case-trimming system indexes on case shoulders for precise trimming every time. The adjustable collet system works with shouldered cases from .17 Remington to .460 Weatherby and fits just about any drill or drill press.

6. Graf’s — Federal .22 LR Hi-Vel ammo, 525 Rounds $36.99

federal 22 ammo sale
Quality USA-made ammo, just $0.07 (seven cents) per round

With the high cost of primers, powder, and bullets these days, more gun guys/gals are shooting rimfire rifles. If you need good .22 LR ammo at a very attractive price, check out Federal .22 LR Hi-Vel ammo at Graf’s. Get a bulk pack with 525 rounds for just $36.99. That works out to $3.52 for 50 rounds — a great price for good-quality major USA brand ammo.

7. Natchez — Pistol and Rifle Magazines on Sale

pistol magazine sale
Huge selection of pistol and rifle magazines deeply discounted

Have you been waiting for the right time to pick up more magazines for your favorite pistol or rifle? Right now Natchez is running a big Multi-Brand Magazine SALE. You’ll find mags for Glock, Ruger, SIG Sauer, Smith & Wesson, Taurus, and Kimber at big savings. For example, a Glock G17 Gen5 17rd magazine is just $19.99. That’s 17% off the regular $23.99 price.

8. Amazon — RCBS Automatic Priming Tool, $115.99

rcbs priming sale
Popular and efficient bench-top priming unit

If you’re looking to prime your cases fast and consistently then check out the RCBS Auto Priming Tool. This tool mounts securely to a bench top. It is simple to use but reliable and very consistent thanks to its single-stage lever system. You can load up to 100 primers in the two provided vertical primer-holder tubes. This system is very efficient — you can insert a case and prime it in just a few seconds. Here are verified owner comments: “Fast with very consistent sitting depth”; “Works fantastic, netting me over 500 cases an hour easily — my hand-priming days are over”; “Loading the primers into the feeding tube is easier than handling individual primers [with] traditional tools.”

9. Amazon — Hunpal Compact Tripod, $19.99

tripod rest sale
Handy tripod for hunters and varminters — low-cost and compact

For plinking fun days or a varmint trip, sometimes a simple, small-format front rest may be all you need. This HUNTPAL Portable Tripod offers versatility, low cost, and a compact footprint. With aluminum construction, non-slip rubber feet, and the ability to work as either a tripod or monopod, this HUNTPAL unit can be helpful for varminters and hunters in the field. It can also work as a front rest for sighting in a hunting rig.

Permalink Bullets, Brass, Ammo, Gear Review, Hot Deals No Comments »
February 27th, 2023

Democrats Introduce Legislation to Ban Online Ammo Sales

online ammunition sales ban act legislation

“Second Amendment? — We don’t give a damn.” That could be the mantra of many Democratic Party members of Congress. Now a radical anti-gunner from New Jersey has introduced new Federal legislation, H.R. 584, that would prevent all Americans from purchasing ANY quantity of ammunition online. All ammo sales would have to be in person with photo ID.

Congresswoman Bonnie Watson Coleman (D-NJ) (“Watson Coleman”) has revived legislation that would prohibit the sale of ammunition online. Last month, Watson Coleman introduced the Stop Online Ammunition Sales Act of 2023, a new version of restrictive legislation she authored in the past. The bill has been listed as H.R. 584 and referred to the House Committee on the Judiciary. As of February 24, 2023, H.R. 584 had 23 co-sponsors*, all woke Democrats, including the radical Rashida Tlaib, noted for her calls to defund the police (which shows how little she actually cares about reducing crime).

CLICK HERE to READ H.R. 584 »

This unconstitutional bill, according to the NRA-ILA, would implement all of the following:

1. FORCE purchasers to submit a photo ID in person every time one buys ANY ammunition.
2. REPORT the identity of ammo purchasers to the U.S. Attorney General if the ammo buyers purchase more than 1,000 rounds within a 5-day period.
3. REGISTER ammunition buyers in a database maintained by the U.S. Department of Justice.

You know what the DOJ would do with the database of ammo buyers. It would be used to identify gun owners, creating a de facto registry of gun owners. That’s in direct violation of Federal law which forbids such a registry.

Guns.com reports: “The proposal [H.R. 584] would establish the licensing of ammunition dealers who then would be required to confirm the identity of customers seeking to purchase ammo by verifying a valid photo I.D. in person. As such, it would place a prohibition on the current widespread practice of buying ammo online and having it shipped directly to the customer’s door. The measure would also require these vendors to report all purchases of more than 1,000 rounds within a five-day period by the same person to the U.S. Attorney General as well as local and state law enforcement.”

online ammunition sales ban act legislation

Effects If ‘Stop Online Ammunition Sales Act’ Becomes Law

From a practical standpoint, this legislation would make ammunition much more difficult to buy in large quantities. And specialized ammo, for less popular chamberings, could be almost impossible to get, if people could only shop at local retail outlets. Being able to shop a dozen or more online vendors allows shooting enthusiasts to get a wide variety of ammo types at competitive prices. For example, with AmmoSeek.com, you can see the best rimfire and centerfire ammo deals from dozens of vendors.

Watson Coleman and her anti-Second Amendment co-sponsors want to make it MUCH more difficult to obtain ammunition, and she would be delighted if the cost of ammo doubled or even tripled. She hates firearms and hates gun owners.

Regarding H.R. 584, GunsAmerica contacted Alan Gottlieb, founder of the Second Amendment Foundation. Gottlieb was critical of the one-sidedness of legislation in that it presupposes all ammunition sold online ends up in the hands of criminals. Gottlieb noted: “Day in and day out men and women save their lives with ammunition they have bought online and the only response from Democrats is to call for bans on the sale of ammunition.”

online ammunition sales ban act legislation


Additional cosponsors of the bill include:
Jake Auchincloss [D-MA-4]
Joyce Beatty [D-OH-3]
Earl Blumenauer [D-OR-3]
Andre Carson [D-IN-7]
Joe Courtney [D-CT-2]
Jason Crow [D-CO-6]
Danny Davis [D-IL-7]
Madeleine Dean [D-PA-4]
Diana DeGette [D-CO-1]
Susan DelBene [D-WA-1]
Mark DeSaulnier [D-CA-10]
Glenn Ivey [D-MD-4]
Sydney Kamlager-Dove [D-CA-37]
Barbara Lee [D-CA-12]
Zoe Lofgren, Zoe [D-CA-18]
Betty McCollum [D-MN-4]
Kweisi Mfume [D-MD-7]
Seth Moulton, Seth [D-MA-6]
Eleanor Holmes Norton [D-DC-At Large]
Donald M. Payne, Jr. [D-NJ-10]
Mike Quigley [D-IL-5]
Rashida Tlaib [D-MI-12]
Jill Tokuda [D-HI-2]

Permalink - Articles, Bullets, Brass, Ammo, News No Comments »
February 26th, 2023

Sunday GunDay: Transformer — F-TR Rifle Built from Varmint Rig

Brandon .223 Rem F-TR Pac-Nor PacNor Varmint Remington VSSF John Pierce Hydro-dip Hydrographics

We’re having a wicked winter in some parts of the nation. California is experiencing blizzards and snow-bound highway closures. In the middle of the nation, major snowstorms hit many states, and 470,000 customers lost electrical power after an ice storm in Michigan.

Rifle Transformed from Ordinary Varmint Rig to a Stunning F-TR Machine
As an antidote to these weather-related worries, for this Sunday GunDay we’re offering a bit of beauty amidst snow — a handsome rifle showcased in a white winter wonderland. This handsome rifle started life as a rather ordinary .204 Ruger Rem VSSF varmint rig. With a new barrel, a new stock, and a stunning flame-pattern hydro-dip coating, this is now an ultra-accurate .223 Rem F-TR competition rifle.

Flames in the Snow…

Forum Member Brandon Schlund (aka “Bois Blanc Boy”), photographed this handsome flame-themed F-TR rifle against the snowy background of Michigan’s Bois Blanc Island. Brandon posted this to our long-running Pride and Joy Rifle Forum thread. He notes: “This is my first F-TR build, which started out as a stock Remington .204 Ruger. I had the action blue-printed, firing pin was bushed by Speedy, and I had a new bolt handle and knob installed by John Pierce.” This rifle is now fitted with a 3-groove Pac-Nor 1:6.5″-twist barrel chambered in .223 Remington to shoot the 90gr Bergers. Other components are: Kelbly KTS stock, Phoenix bipod, and Sightron 8-32x56mm SIII scope. Brandon says: “It took a long time to get this gun where it is now but I’m truly happy with it!” Here’s the “before” photo:

Brandon .223 Rem F-TR Pac-Nor PacNor Varmint Remington VSSF John Pierce Hydro-dip Hydrographics

The Transformation — F-TR Comp Rig Made from Rem .204 Ruger Varminter
Report by Brandon Schlund
This rifle started out as a “plain Jane”, factory Remington VSSF II. I shot it on varmint hunts in factory configuration. Then I decided to transform the rifle into a .223 Rem F-TR gun. As the .204 has the same bolt face as a .223 made sense to go in that direction since I would be able to use the gun for varmint hunting as well as F-TR.

While I had shot some F-Class matches with my dad (Joe Schlund aka Bench on AccurateShooter) it wasnt much. When we did a PD hunt in Wyoming I primarily shot my .204 but I decided I wanted a cartridge that could reach out a little further and also do double duty — competition and varminting.

Brandon .223 Rem F-TR Pac-Nor PacNor Varmint Remington VSSF John Pierce Hydro-dip Hydrographics
CLICK HERE for full-screen photo.

The first step in transforming this rifle was selecting a barrel. We ordered a Pac-Nor, 1:6.5″-twist, 3 groove, 30.5″ heavy Palma contour. This was then chambered with a PTG .223 ISSF reamer with 0.169″ freebore to run the .224 caliber heavies. I went with Pac-Nor because both my father and my brother Mark (aka Labrador2 on AccurateShooter) owned Kelbly-built F-TR rifles with the same barrels. Mark and my father couldn’t be happier with the results. Pac-Nor has great customer service along with a short wait time.

I sent the barrel and the factory Remington 700 action down to Kelbly’s where they did the chambering and cut the threads. While Kelbly’s had my action I had them blueprint it. A Kelbly KTS stock with the three-way buttplate and adjustable cheek piece came next. After getting behind Dad’s rifle and Mark’s gun there was no reason to look any further. With all its adjustments, the KTS stock fits very comfortably.

Loading for the .223 Rem with H4895 and 90gr Bergers
As a .223 Rem, this rifle has proven very accurate — it’s a bullet-hole cutter at 100 yards (low twos easy). Our best load is with Hodgdon H4895, 90gr Berger VLDs, CCI BR4 primers. This load is running at about 2835 FPS but YMMV (remember this is a LONG 30.5″ barrel). The Bergers are loaded .008″ into the lands with base-to-ogive of 2.035″.

Our loading technique may be tedious — with lots of sorting and measuring. But brother Mark, father Joe, and I all enjoy the steps. Our three .223 Rem match guns all love the same load which makes loading much easier. Believe it or not we use a Hornady Lock-N-Load progressive ammo plant, which is great when loading for three guns. Our consistency is fantastic with run-out a mere .001-.0015.

We also turn necks and weigh our primers. Does neck-turning and primer weighing really make a difference? Who knows but we try to eliminate more variables since we have to the time to do it, and we actually enjoy the procedures.

Pierce Engineering Installed Action and Modified Bolt
Being from Michigan, Pierce Engineering has done a lot of work for my family’s guns. For this project the Pierce team bedded the action and glued in a single-shot follower. The stock bolt handle/knob was too short for comfort in the KTS stock. Pierce added a longer handle and tactical knob to the bolt. I then installed a .223 Rem Lapua case base into the knob.

Brandon .223 Rem F-TR Pac-Nor PacNor Varmint Remington VSSF John Pierce Hydro-dip Hydrographics
The complete .223 Rem rifle ready to shoot F-TR, as fitted with 8-32X56mm Sightron and Phoenix Bipod, weighs 17 pounds, 15 ounces.

Brandon .223 Rem F-TR Pac-Nor PacNor Varmint Remington VSSF John Pierce Hydro-dip HydrographicsFlame Graphics by Camo Creek Hydrographics
After the action was bedded by Pierce, the stock was sent to Camo Creek Hydrographics in Fenton, Michigan. I selected a flame-style design which Camo Creek applied through hydro-dipping. The stock went back to Pierce’s shop, which applied three coats of clear over the entire stock. The clear-coating really enhanced the flame graphics.

Firing Pin Bushed by Speedy
I sent the bolt to Thomas “Speedy” Gonzalez to have the firing pin hole bushed as otherwise the load could crater the primers pretty bad. Knowing I’d be shooting heavy-weight .22-Cal bullets with a stout load this was a good idea. Speedy also cut his trademark grooves into the bolt shroud which looks amazing. His work is top notch! There is zero cratering now, even with the hottest of loads.

Competition Components — 8-32x56mm Sightron and Phoenix Bipod
For an F-TR rig you need a quality high-magnification optic and a premium, wide-base bipod. I installed a 8-32x56mm SIII Sightron. This was another easy choice because of the attractive price and because my family has four other Sightrons that work great.

I installed a fore-end Picatinny rail to attach a Phoenix Bipod. I extended the Mariners wheel handles by adding short sections from an aluminum arrow shaft. This lets me adjust elevation without stretching forward. I also installed a Calvin Elite Timney Trigger set at 6 ounces.

$2500.00 Invested in Rifle Transformation and Upgrade
How much did this all cost? Brandon tells us “I have roughly $2500 into the rebuild of the gun from a .204 Ruger to the .223 Rem.”

Bois Blanc Island in Michigan
Here on Bois Blanc Island we don’t have many amenities, but we do have the ability to shoot 550 yards at our local gravel pit on state land. It’s snow-bound right now as you can see. But later in the year this will be our close-to-home training center.

Brandon .223 Rem F-TR Pac-Nor PacNor Varmint Remington VSSF John Pierce Hydro-dip Hydrographics

Winter at Bois Blanc Island, Michigan — Here’s the gravel pit where we can load test during
warmer weather. When I took this photo, it was a “balmy” 10-degree day.

Permalink - Articles, Competition, Gear Review, Gunsmithing No Comments »
February 26th, 2023

Best of Both Worlds — SEB’s One-of-a-Kind Hybrid F-Open Stock

Accurateshooter.com Seb Lambang F-Class wood aluminum stock bag rider

NOTE: This is an older article, but with the SW Nationals taking place last week, we thought our readers might enjoy a repeat view of a very rare and unique F-Class rig. This hybrid wood and aluminum stock is a “one-of-kind” custom, crafted by Sebastian (“Seb”) Lambang, creator of the SEB Coaxial Rests and Coaxial Joystick Bipod.

Back in 2013, our friend Sebastian (“Seb”) Lambang engineered an impressive wood and aluminum F-Class stock. The stock features a long, box-section aluminum fore-end with a wood rear section and wood-trimmed “wings” on the front bag-rider. The aluminum fore-arm has “buick vents” for weight reduction. From the end of the action rearward, the stock is mostly wood, with light and dark fancy wood laminates on opposite sides (left and right).

Accurateshooter.com Seb Lambang F-Class wood aluminum stock bag rider

Accurateshooter.com Seb Lambang F-Class wood aluminum stock bag rider

The foot of the buttstock has a very wide aluminum rear bag-rider with rails. The rear wood section appears to be two solid pieces of wood — but that is deceiving. Seb explains: “To save weight, the buttstock is hollow (using thin-walled wood)”. To strengthen the construction, Seb added carbon fiber inside the buttstock. So what you see is a wood outer shell with carbon fiber layers on the inside. The stock sports vertically-adjustable cheek-piece and buttplate. The thick, rubber buttpad should diminish felt recoil even when shooting big cartridges with heavy bullets.

Accurateshooter.com Seb Lambang F-Class wood aluminum stock bag rider

Accurateshooter.com Seb Lambang F-Class wood aluminum stock bag rider

This is an interesting, innovative stock design. And as with everything Seb produces, the craftsmanship, fit and finish are superb.

To go with this gun, Seb also crafted a handsome set of angled scope rails with beautifully-machined scope rings. Imagine being able to custom-make one-off products of this quality in your own machine shop!

Accurateshooter.com Seb Lambang F-Class wood aluminum stock bag rider

Permalink Gear Review, Gunsmithing No Comments »
February 25th, 2023

Saturday Movies: Best Brownells Videos — Tools, Tips, and More

Brownells video archive youtube channel scope mounting air travel AR15 reloading .22 LR cleaning

Brownells is a well-known retailer of guns, gun parts, tools, accessories, ammo, and pretty much everything gun-related. What you may not know is that Brownells has a very active video production department that releases new “how-to” and product information videos every week. These videos offer helpful advice on gun cleaning/maintenance, reloading, as well as selecting/assembling components for various kinds of rifles. And every week Brownells serves up a new products video. There now over 1000 videos on the Brownells YouTube Channel, which is truly a remarkable resource.

Here are six of our favorite videos from Brownells. There’s a helpful guide to scope installation, AR owners will find some good advice on spare parts, new reloaders can learn how to use the OAL tool, and all gun owners should watch the video on ammunition storage.

Scope-Mounting — Common Mistakes to Avoid

Always be careful when mounting a rifle scope. This isn’t a super-complex or highly technical task, but there are ways you can mess it up. This video explains common pitfalls to avoid when mounting a scope.

1. Make sure the rings don’t touch ANY part of the turret housing, objective bell, or eyepiece.

2. Be certain the scope rings are tightly clamped to the scope base. Grasp the scope with one hand and the rifle with the other, then ensure there is no play.

3. Make sure there’s clearance between the objective bell and the rifle. No part of the scope should touch the rifle itself.

4. NEVER over-tighten the scope rings. You can actually crush the scope tube and damage the optic beyond repair. Stick to the torque specs!

How to Use Hornady OAL Tool and Hornady Bullet Comparator

Gun Tech Steve Ostrem explains how to properly use Hornady’s Overall Length Gauge to determine length-to-land precisely. The OAL Gauge uses a “Modified Case” that threads onto the tool and holds a bullet. Push on the back of the gauge until you feel the bullet just touch the rifling. (We do this gently at first, tapping the rod a couple time to ensure the bullet is aligned correctly). Once you’ve got the length, then use the tool with a comparator on your calipers to get the length-to-lands. NOTE: We recommend taking the measurement 3-4 times in a row to get a reliable number. With a little practice your should be able to get repeatable measurements within .0015″.

Air Travel with Firearms — Key Regulations You Must Follow

You can travel on commercial airlines with firearms. But you must follow the TSA regulations, and your particular airline’s rules. First, make sure your guns are UNLOADED before your leave home. Guns need to be carried in proper hard-sided cases that cannot be pried open. Be prepared to unlock the case if the TSA wants to inspect what’s inside. TSA agents can cut the locks if they need to open the case but can’t locate you. If you use special TSA-approved locks, TSA agents have master keys that let them open the case without destroying your locks. You CAN transport up to 11 pounds of ammunition — with restrictions explained in the video.

How to Store Ammunition Safely and Securely

This has been one of the most popular Brownells videos — with over 1.7 million views. Here’s the deal — ammunition WILL keep for a long time if you store it properly. DO store ammunition in a cool, dry place that doesn’t have wide temperature swings. Temperature cycling will also degrade primers and powder. Put it in airtight ammo cans to keep out the moisture. Tupperware containers will work too. Brownells also recommends putting moisture-absorbing silica packs in your ammo containers. DON’T just keep ammo in factory cardboard factory boxes stacked in the basement, attic, or garage (especially on the floor). Factory ammo boxes can absorb moisture which can degrade primers and corrode the brass cases. Yes, sealed military ammo will usually handle this kind of storage for quite a while, but it’s still not wise.

Must-Have Spare Parts for AR-Platform Rifles

In this video, two knowledgeable gun techs answer the question: “What spare parts should I keep on hand for my AR-15?” On the list are: Gas Rings, Buffer Spring, Extractor Spring and Pin. NOTE: You may want to try the one-piece spiral gas ring rather than the standard rings which require alignment. The cotter pin and cam pin can also easily get lost when the Bolt Carrier Group is disassembled for cleaning. On the lower receiver you’ll want spare springs and detents for the pivot/takedown pins. If you’re using lighter-power springs, keep standard-power spares on hand. If your rifle stops working, swap in the factory-spec springs to find out if the problem is the gun or your ammo. Also, if you have upgraded your trigger, always keep the original trigger as a backup.

Cleaning Advice for .22 LR Rimfire Rifles

Gun Techs Steve Ostrem and Caleb Savant debunk some myths about cleaning .22 LR barrels. One myth is that cleaning will harm the accuracy of a .22 LR barrel. Caleb thinks this myth is the result of people cleaning a barrel from the muzzle and damaging the muzzle crown, which CAN diminish accuracy. If it’s done right, cleaning won’t damage the bore. However, you certainly do NOT have to clean your 22 LR’s bore every time you go to the range. But DO clean the action every time you shoot the rifle, especially on a semi-auto. What about shooting a lot of lead bullets? Won’t that lead up the bore? The guys give us the straight skinny on lead fouling, too. When you see your .22 LR rifle’s groups opening up, you may want to consider cleaning.
This article is Copyright 2023 AccurateShooter.com. Reproduction on any other website gives rise to monetary damages.

Permalink - Videos, Gear Review, Optics, Tech Tip No Comments »
February 25th, 2023

NRA Annual Meetings & Exhibits in Indianapolis April 14-16, 2023

NRA National Rifle association annual meetings exhibits convention indianapolis convention center april 2023 indiana

The 2023 NRA Annual Meetings & Exhibits will take place at the Indiana Convention Center on April 14-16, 2023 in Indianapolis, Indiana. The Exhibit Hall is open all three days and will showcase over 14 acres of guns and gear from hundreds of manufacturers and retailers.

A bigger-than-ever Exhibit Hall will host approximately 800 exhibitors, events, receptions and demonstrations. Attendees can see the latest guns, knives, optics, ammo and accessories available on the market today. Organized events include the NRA Foundation Banquet and Auction, the NRA-ILA Leadership Forum, plus multiple seminars. There will be appearances from notable celebrities, and a major Saturday concert with leading musical artists.

At this 152nd Annual NRA Convention you can also book the hunt of a lifetime, purchase shooting and hunting accessories, view impressive gun collections, and hear influential, pro-2A experts.

NRA National Rifle association annual meetings exhibits convention indianapolis convention center april 2023 indiana

The big event is just six weeks away. If you plan to attend the 152nd NRA Annual Meetings & Exhibits we recommend you register soon and get your hotel booked well ahead of time. With the current policies coming from the White House, there has been no more important time to support gun rights and the Second Amendment.

Permalink New Product, News, Shooting Skills No Comments »
February 24th, 2023

GeoBallistics Software Acquired by Vortex

Vortex geoballistics software ballistics rangefinder atmospherics long range ballistic table windage elevation

Vortex geoballistics software ballistics rangefinder atmospherics long range ballistic table windage elevationVortex, the large American optics company, has acquired GeoBallistics, a Texas-based business that sells mobile platform ballistics software. The GeoBallistics software is offered for both iOS (Apple) and Android platforms. This software features an advanced 3DOF solver and continuously updated bullet library. GeoBallistics software has other very sophisticated features:

1. Four Operating Modes (HUD, Map, Chart, and Comp).
2. Atmospherics Bluetooth Connectivity with Kestrel and Weatherflow.
3. Map Mode with GPS Rangefinder (use to range targets, create range cards).
4. Rifle Data and Range Cards available and synched via internet cloud servers.

Vortex Will Support Current GeoBallistics Users
For shooters already utilizing the GeoBallistics software, nothing in the software and App experience will change. And Vortex will now provide customer service and support. To learn more about GeoBallistics Apps, visit GeoBallistics.com.

Vortex plans to add GeoBallistics products to the Vortex portfolio to continue “to enhance and simplify hunting and shooting while providing critical information quickly and accurately.”

“We’re always looking for new ways to help Vortex Nation enjoy unforgettable experiences in the field”, said Joe Hamilton, Vortex CEO. “Acquiring GeoBallistics means we can offer both consistency in our product line and make long-range ballistics simpler and more accessible for everyone.”

Vortex geoballistics software ballistics rangefinder atmospherics long range ballistic table windage elevation
Vortex geoballistics software ballistics rangefinder atmospherics long range ballistic table windage elevation

How to Use GeoBallistics App — Informative Video

In this video, Clay Hergert, owner of ATX Precision (and former SEAL Team Sniper) demonstrates the GeoBallistics App with BallisticsARC capabilities. Clay shows how to use BallisticsARC to create rifle profiles.


This article Copyright 2023 AccurateShooter.com. No reproduction on any other website is authorized.

Permalink - Videos, News, Optics, Tech Tip No Comments »
February 24th, 2023

Dad Develops .223 Rem F-TR Load for his Daughter

F-TR load development .223 Rem Remington Sierra TMK

Just last week hundreds of F-Class shooters competed at the Southwest Nationals in Phoenix, Arizona. The vast majority of F-TR shooters had rifles chambered for the .308 Winchester cartridge (7.62×51), but F-TR rules also allow the .223 Rem (5.56×45). There are some advantages to the smaller .223 Rem round — there’s notably less recoil, bullets and brass are significantly cheaper, and a lot less powder is required. For those who are considering campaigning a .223 Rem F-TR rifle, this story explains how an accurate .223 Rem load was developed. This load development was done by a father for his daughter who was getting started in F-Class competition.

Dad builds an F-TR Rifle for his Daughter and Develops Load

Jeremy Rowland decided to put together an F-TR rifle for his eldest daughter, who enjoys competitive shooting. For his daughter, Rowland chose the .223 Rem option because it has less recoil and components are less costly than the .308 Win. Here is Rowland’s account of how he developed a .223 Rem load. For more details (with data charts), read Jeremy’s FULL STORY on Sierra Bullets Blog.

Journey to Find a .223 Rem F-Class Load

by Jeremy Rowland, Reloading Podcast
My oldest daughter has been to several matches with me, and has even competed in several, using her .243. [A few seasons back] I decided, she would compete with a .223 Rem in F-TR. Looking for a good starter rifle, I settled on the Savage Axis Heavy Barrel since it has a 1:9″ twist. This would be a great little rifle for her to learn on. The rifle was shot unmodified, as it came from the factory. A Sinclair F-Class Bipod w/micro elevation adjustment was fitted to the front.

Next came finding the components I wanted to use for her match loads. After spending hours and hours running numbers on JBM stability calculator as well as in my iPhone Ballistic AE app, the 69 gr Sierra Tipped MatchKing® (TMK) looked really good. So that’s what I decided to go with. I jumped in head first and ordered a bulk pack of the Sierra 69 gr TMKs. I had settled on Hodgdon CFE 223 powder since it shows good velocity. I decided to go with once-fired Lake City brass with CCI BR4 primers.

Next came the testing. I decided to run a ladder test (one shot per charge from min to max looking for the accuracy node). The ladder test ranged from 23.5 grains to 25.6 grains, in 0.3 grain increments.

F-TR load development .223 Rem Remington Sierra TMK

Ladder Test Conditions: Temp: 59.4° | Humidity: 63% | Elevation: 486 | Wind: 5-12 mph

F-TR load development .223 Rem Remington Sierra TMK

Bullet: 69 gr Sierra Tipped MatchKing®
Case: Lake City (mixed years, sorted by case capacity)
Primer:CCI BR4
Powder: Hodgdon CFE 223 (one round each from 23.5 to 25.6 grains)
Cartridge OAL: 2.378″
Base to Ogive: 1.933″ (.020″ off lands)

After his ladder test, Rowland settled on a load of 25.2 grains of Hodgdon CFE 223. He then fine-tuned his load with different seating depths: “I loaded up 5 rounds each at .020″ off lands, .015″ off lands, .010″ off lands, and .005″ off the lands. Here are the results from the best group for OAL/Ogive fine tuning. As you can see, I think I’ve found a winner in these 69 gr Sierra Tipped MatchKings.”

F-TR load development .223 Rem Remington Sierra TMK

Seating Depth Test Conditions: Temp: 36.3° | Humidity: 73.8% | Elevation: 486 | Wind: 5-7 mph

This article originally appeared in the Sierra Bullets Blog.

Permalink Bullets, Brass, Ammo, Competition, Reloading, Tech Tip No Comments »
February 23rd, 2023

Control Rifle Canting to Improve Long-Range Accuracy

rifle level canting shooting rifle Ryan Cleckner

In a helpful NSSF video, Ryan Cleckner explains why you normally should avoid canting your rifle — rotating it clockwise or counter-clockwise. Cleckner explains that canting the rifle in one direction or another will change the point of impact: “When you rotate the rifle, not only does the [POI move] in the direction that you’re rotated, [but] it also loses some of its elevation as it rolls down.” This, Cleckner explains, can make you miss on one side or the other:

Cant to the Left — You’re going to miss low and left.
Cant to the Right — You’re going to miss low and right.

rifle level canting shooting rifle Ryan Cleckner

In this video, starting at the one-minute mark, Cleckner shows the effect of rifle canting when engaging a 600-yard target. A few degrees of cant (either to the left or to the right), moves the shot POI completely off the steel silhouette target. The POI change occurs mainly because you are lowering (and laterally shifting) the scope sight-line relative to the bore axis, effectively changing your zero.

David Tubb has explained: “Every 1 degree you are off on a cant, is about six inches of difference laterally at 1000 yards”.

Position Shooting with Sling — Rifle Cant Considerations
Cleckner’s discussion assumes that the scope or sights are set to hit center with the rifle level and plumb. That works for most situations when shooting prone off bipod, front mechanical rest, or front sandbag. However, many sling shooters, including David Tubb and John Whidden, do tilt or cant their rifles slightly inward because this allows a more comfortable hold with sling, or allows better eye-to-sight alignment. Holding the rifle at an angle can work — but the angle of cant must be consistent for every shot. Canting the rifle is not a sin by itself. However, after you confirm your zero on your target, the degree of cant must be the same for EVERY shot. You must maintain that exact same degree of rotation on each shot or you will experience the shot POI movement Cleckner illustrates. Consistency is the key.

John Whidden
John Whidden, 5-time Nat’l Long Range Champion, holds a Palma rifle. John now shoots a match rifle with an Anschutz stock which he holds more upright, but still with some counter-clockwise cant. John also installed his iron sights at an angle so that the adjustments are correct (and plumb) even with his canted hold: “While it may not be obvious in the picture, the sights on my rifle are set up so that they’re straight vertical and horizontal while I hold the rifle canted. Making sure your adjustments (scope or sights) are vertical and horizontal is a critical piece of the pie.”

Inexpensive Dual-Diameter Scope-Mounted Bubble Level
The best way to avoid inconsistent rifle canting is to use a bubble level fitted to rail or scope. One very affordable and versatile product is the Jialitte Scope Bubble Level. This features a 30mm milled inside diameter, plus an inner insert ring so it will also fit 1″-diameter main tubes. The Jialitte unit is nicely radiused, and has a low profile in the middle. User reviews have been very positive. You could easily pay $35.00 or more for a 30mm scope level. This costs just $10.99 on Amazon.

Scope Optic bubble level 30mm 1

Permalink - Articles, - Videos, Shooting Skills No Comments »
February 23rd, 2023

Oven Drying of Wet Brass — How NOT to Over-Cook Your Cases

Oven anneal annealing Alpha Munitions Craig Arnzen Area419.com
NOTE: If you prefer drying your brass in an oven we recommend a temp setting no higher than 200° F. Better yet, use a dedicated case dryer that cannot possibly over-cook your cases.

Tech Tip by Craig Arnzen of Area419.com
As wet-tumbling brass has become more popular in recent years, guys have tried a LOT of ways to get their brass dry — towels, hair dryers, and even food dehydrators. (See Top Ten Brass Drying Methods). Another common method — albeit with some potential issues — is putting your wet brass in the oven to dry. Provided you monitor TEMP and TIME, this method is fast, effective, and easy (as long don’t use the wife’s favorite cooking pans — that’ll get you in trouble.)

With oven-drying, however, unexpected issues can arise, as illustrated by this worrisome story: “I put my brass in for an hour at 200° F and turned it off. Next thing I know I realize my wife has the oven pre-heating to 350° F. Is my brass ruined?”

Oven anneal annealing Alpha Munitions Craig Arnzen Area419.comIf you search the AccurateShooter.com Shooters’ Forum, you’ll find at least three threads with stories like that (i.e. higher-than-expected oven temps when drying brass), and answers on both sides of the line. I know this, because it happened to me — I had some 6XC brass drying and the wife pre-heated the oven. Concerned about my cases, I consulted a genuine annealing expert, Andrew Rixon.

Andrew is the Director of Engineering and Manufacturing at Alpha Munitions, makers of premium-grade rifle brass. I had baked a batch of Alpha’s new 6XC brass, which is exceptionally consistent and well-made.

Before Andrew would answer my question though, he gave me a little lesson on what really happens during annealing:

“Annealing is performed by heating the brass to specific temperatures. There are three phases of annealing: recovery, recrystallization, and grain growth. All of which have specific temperatures and or exposure times related to them. It is key for cartridge brass annealing processes to hit the recrystallization phase which allows for strain-free grains to grow. The growth of strain-free grains eliminate dislocations, drastically decreasing hardness and increasing ductility. For recrystallization to occur the material temperature must be within 600-1000 degrees Fahrenheit (F).”

Oven anneal annealing Alpha Munitions Craig Arnzen Area419.com

He then got into really answering the question, and was (fortunately) definitive in his answer: “If the temps do not exceed 450 degrees F then there is nothing to worry about as it did not exceed the critical temperature for annealing to occur.” Editor: Caution — do NOT assume that the temperature marked on the oven knob is the actual temperature INSIDE the oven, particularly near the back. Some older ovens can be off as much as 75 degrees F. Be conservative!

Well, there you have it. If you’ve baked your brass, you’re probably OK. If you got it hotter than 450° F then there can start to be some changes to the metal.

This TECH TIP brought to you by Area 419
Oven anneal annealing Alpha Munitions Craig Arnzen Area419.com

Want to learn more about Alpha Munitions? Visit AlphaMunitions.com.

Permalink Reloading, Tech Tip No Comments »