How well do you know the key provisions of Federal firearms regulations? If you want to play the game, you better know the rules. Thankfully, you can access most important Federal firearms laws in one convenient PDF document, the Federal Firearms Regulations Reference Guide. The Bureau of Alcohol, Tobacco, Firearms and Explosives (ATF) has collected and published key federal firearms statutes in this 242-page, downloadable Reference Guide. The actual statutes and rulings are collected in the front of the document. There is an index on page 169 that will help you get answers to specific questions. NOTE: this Reference Guide came out in 2005. If you have serious concerns about compliance with Federal law you should check with the ATF directly to obtain the latest versions of federal statutes.
Important Topics in the Q&A Section include:
Building of Firearm for personal use
Transfers of firearms
Out of state purchases of firearms
Rules for Shipment of firearms
Mailing firearms via U.S. Postal Service
Residency Rules
Curio and Relic Firearms
NFA Firearms Rules
FFL Sales at Gunshows
Special Rules for Gunsmiths, Pawn-brokers, and Auctioneers
Ammunition Manufacturing Rules
NICS Procedures
ATF Guide to State Gun Laws
Along with the Guide to Federal Regulations, the ATF offers a free downloadable guide to State Laws and Published Ordinances. The latest version we found online was the 30th Edition, drafted in 2009 and revised in 2010. This 526-page PDF guide covers all 50 states, and provides a “Ready Reference Table” to assist gun dealers and FFLs comply with all state laws when selling or transferring arms.
This is a very useful resource, but we remind all readers that they should check for updates or changes in state laws since this document was published four years ago. To aid in that task, the ATF’s State Law Guide has a complete list of state Attorneys General Offices with contact information. The ATF also provides answers to Frequently Asked Questions on its website. CLICK HERE for ATF FAQ. Other ATF Publications are available at http://www.atf.gov/publications/firearms/.
Remington once again showcased a “civilian” production version of the Remington Arms Chassis System (RACS), first shown at the 2011 SHOT Show. The full-adjustable, modular RACS are designed as drop-in upgrades for any Rem 700 action. A Rem 700 action is clamped directly (metal on metal) to the center section of the RACS, which has a V-block type profile and central magazine well. There are both short-action and long-action versions of RACS. These look nearly identical in design, other than the length of the action section (see photos below by EdLongrange.)
The RACS features a folding stock, with adjustable cheekpiece, LOP, and buttplate height/cant/cast-off. This stock will accept AI magazines which also come with the kit.
No Release Date or Price Yet
What we still don’t have is a firm price and a date when RACS will actually be released to vendors. This system attracted much attention when first introduced, and it appears Remington has made evolutionary upgrades, but right now Remington is still not disclosing a final prices or a reliable delivery date. So keep your figures crossed, but don’t get too excited. Rem’s RACS may remain “vaporware” for an extended time.
Many readers will be driving across multiple states this spring and summer to attend competitions. Other shooters will be heading out of state for a game hunt or to spend a week in the prairie dog fields. For $13.95 you can purchase a state-by-state Traveler’s Guide to firearms laws. Written by a lawyer, this 68-page guide covers all firearms types and all 50 states. It even has info for Canada and Mexico. The latest edition of the Traveler’s guide, updated with 85 changes for 2012, has just been released.
The Traveler’s Guide to the Firearm Laws of the Fifty States has sold more than 900,000 copies since it was first released in 1996. The book’s author, Attorney J. Scott Kappas, has written numerous magazine articles and has appeared on television, explaining the unexpected pitfalls that shooters may encounter when traveling with firearms. Along with being an attorney, Mr. Kappas serves as a director on the Board of the Kentucky Firearms Foundation, and Kappas is a Class III firearms dealer.
The Traveler’s Guide is especially useful for shooters traveling in RVs and motorhomes. The American Rifleman Magazine declared: “This book is a must-have for truck drivers, motor home enthusiasts, campers and other travelers…easy to read and understand, well-organized and concise….” One reader from Texas adds: “I used to think that my RV was the same as my home when it came to gun carry….the Traveler’s Guide set me straight. Now I know my motorhome is subject to the same laws as any vehicle when it comes to guns.”
Noted gunsmith Dave Tooley saw our coverage of Accuracy International (AI) “Skins” in the Daily Bulletin, and he wanted to inform our readers about updates to AI’s AX line of rifles.
Updated 2012 AI AX Rifle for PSRII
Dave wrote: “As you know I do AI’s smithing in this country. Attached is a picture of the latest version of the AX rifle. This is what was submitted to SOCOM for PSRII the first of January. AI has incorporated a right-hand hinge to make the rifle more compact when folded. There are some other major improvements. First, the way the rails lock up on the tube now completely eliminates any chance of movement (that’s important for lasers and other things). The buttstock is now considerably lighter than the older version, and it now uses simple knobs on the cheekpiece, the LOP adjustment, and the adjustable recoil pad. I think the knobs are more user-friendly than push-buttons.”
CLICK for FULL-SCREEN Photo
New Barrel Swap Kit
The most significant improvement to the AX, according to Tooley, is the ability for the operator to change barrels with minimal tools. Tooley explains: “The complete barrel change tool-kit is one 4mm Allen wrench stored in the cheek piece. If you look at the picture you will see a screw about midway under the receiver. Loosen two captured screws under the forearm and the tube comes off. Then loosen the screw under the receiver and unscrew the barrel. This is dead simple and it works. I’ve tested six rifles with a total of 10 barrels and there were no issues. This is a great precision sniper rifle.”
Editor’s NOTE: Though the product has some shortcomings, we wanted to show you guys the Hyskore Bench Beast Coaxial Competition Rest because it has some interesting engineering features (such as the scissors-jack primary elevator). The front bag holder won’t accept very wide fore-ends, and the high sides of the rear rest compromise your ability to get in close to the gun and work the rear controls while aiming. Still, there are few integrated front/rear rests on the market, so we thought you’d want to see this new offering from Hyskore.
At SHOT Show 2012, Hyskore unveiled an combined front/rear mechanical rest system appropriately named the Bench Beast. The front rest has a coaxial-type control activated by a long, angled joystick. Hyskore claims the joystick control provides 110 MOA adjustment for both windage and elevation.
For gross elevation changes, this contraption uses a scissors-jack type lift in the front that is definitely industrial in origin. In fact, the Bench Beast looks like something made in a Latvian tractor factory. But this may be useful for someone who wants a linked front and rear mechanical rest that can support a very heavy rifle (50 lbs. or more). It looks like the max width in the front is limited to 3″ so this would not work with a super-wide stock without modification. Too bad. Moreover, the front bag supplied with the Bench Beast is designed for narrow, hunter-style fore-ends. Even to run a 3″-wide gun, you’ll need to purchase an aftermarket bag. While Hyskore calls this a “competition rest”, the Bench Beast is not really set up for competition rifles.
About $500.00 for Combined Front and Rear Rests
The front and rear units can be purchased separately. Exact pricing is not yet set, but the front section should cost about $300, with the rear priced about $200.00. People should note, however, that, if you have full windage and elevation adjustment in the rear, you really only need gross height control in the front (to get on target). With a good rear rest, all the fine windage and elevation adjustment can be done from the rear, and, because of the geometry, a little bit goes a long way. It would be interesting to combine the Bench Beast’s rear unit with a simple (non-joystick) front pedestal rest.
Design Concerns
We’re intrigued with the Bench Beast’s rear unit, since there are few mass-produced, mechanical rear rests on the market. However, we have some concerns about the footprint, height, and overall size of the rear unit (SEE video 1:00-1:10). Ideally, a rear mechanical rest should allow the shooter to tuck in comfortably beside the gun. The Bench Beast has fat control knobs and tall support shafts placed far out from the centerline, on the extreme edges of the rear base.
While the wide rear base provides a solid platform, the outboard support columns and control knobs, we believe, make it difficult for the shooter to position his upper body close to the gun.
The main rear rest control knobs are also not conveniently placed. Look at the video carefully. Better rear rests have the controls further forward and closer to the centerline where they can be easily reached by the shooter’s non-trigger-pulling hand, in a comfortable shooting position. That way a right-handed shooter can easily use his left hand to work the controls while viewing the target through the scope, and holding the rifle grip with his right hand. We like the idea of an affordable rear mechanical rest, but we think the rear section of the Bench Beast would benefit from a major redesign.
MidwayUSA’s Master Catalog has been the “magnum opus” of gun gear catalogs. Over 1,000 pages long, the Master Catalog includes more than 100,000 products. This year, the 35th Annual MidwayUSA Master Catalog is available is a convenient PDF Digital Edition. There are over 1,040 pages in this new digital edition, complete with color photographs, firearm schematics, reference charts, detailed product information, and an extensive index to help you find exactly what you need. You can even download these files to your tablet, laptop, or smartphone.
Download the 200mb digital edition by visiting MidwayUSA’s Catalog Center. Scroll down the page until you see Click to Download the Entire Catalog in the lower left. We’ve tried out the 35th Annual Master Catalog loaded on an iPad and it’s very handy. It’s nice to have it on the iPad drive, so you can access the complete inventory of gear and reloading components even without an active web connection.
Background: Last year, when Leupold introduced its 1.1-8x24mm FFP Mark 8 CQBSS scope at a whopping $3,999.00 price, jaws dropped in the shooting world. Folks rightly wondered whether anyone (other than Uncle Sam) would pay four grand for a small, compact scope, even if it did offer a broad magnification range and other innovative features.
U.S. Optics SN-8 Is Thousands Cheaper than Mark 8
Well U.S. Optics has just undercut Leupold by a couple thousand dollars, providing a much more affordable 1-8X option for tactical shooters and 3-gunners. If you were thinking about the Mark 8, you better take a close look at the new 1-8x28mm SN-8 from U.S. Optics. From what we can see, the SN-8 performs on a par with the Mark 8, plus it features a true 1X magnification on the low end — which is best for fast, both-eyes-open target engagement. The new SN-8 is offered in two models. The 1-8x28mm SN-8 Standard version retails for $1945.00, while the higher-end version with Red Dot-equipped eyepiece runs $2445.00, still substantially under the cost of Leupold’s Mark 8. These new SN-8s should start shipping in June, 2012.
New “Slim-Line” Hunting Scopes from U.S. Optics
For 2012, U.S. Optics is bringing out a series of compact, light-weight “Slim-Line” hunting optics: 1.5-6X, 1-4X, and 3.2-17X. Though they offer a significant weight-savings over typical hunting scopes, these new Slim-Line hunting scopes are built for hard use, and U.S. Optics backs them with an impressive, transferrable, “full lifetime” warranty. Prices start at $1100.00 and the Slim-Line Hunting scopes should hit the market in late March or April, 2012. We like what U.S. Optics is doing with this “Slim-Line” scope series. For daylight deer and varmint hunting, many hunters are better served with a compact 1.5-6X variable, than with a large, bulky high-power scope with a relatively small field of view.
At SHOT Show, in addition to its all-new SN-8, U.S. Optics also showcased its innovative dual-focal-plane tactical scopes. Offered in 1-4X and 1.5-6X, these offer the best of both worlds. The FFP reticle allows consistent ranging at all magnifications, while the Second Focal Plane functionality allows more precise aiming, since reticle line thickness does not increase as the magnification goes up.
If you weren’t able to attend SHOT Show last week, you can still read the Digital editions of all four issues of SHOT Daily, the magazine printed each day of the SHOT Show. You’ll find some interesting product announcements in the SHOT Dailies, plus late-breaking gun industry news.
The DAY 1 edition features the annual round-up of new firearms, while the DAY 2 edition highlights new-for-2012 optics. On Pages 20-23 of the Day 3 edition, you’ll find an interesting article by John Snow on a 6mm Creedmoor wildcat (6.5 Creedmoor necked down — see below). The final Day 4 edition includes a guide to .375-Caliber big game cartridges, along with coverage of the latest Air Gun technologies.
The 2012 SHOT Show Dailies are available online at Shotbusiness.com and the SHOT Show Blog, or just click the links below. You can read the Digital Editions online, or download PDF versions to your computer. NOTE: The PDFs are very large files, slow to download.
Correspondent Kelly Bachand visited the Savage booth at SHOT Show 2012. As always we were impressed with the wide range of affordable, rimfire rifles marketed by Savage. The popular Mark II BTVS is a good choice for rimifire tactical games, and it is also a nice carry-around varminter for squirrels and other small critters. The model 93 ‘Package Series’ rifles are real bargains. MSRP on the model 93R17 XP Camo package (which includes 3-9x40mm scope) is $456.00, while the “street price” is around $385.00.
What really caught Kelly’s eye was the impressive Model 110 FCP chambered in .338 Lapua Magnum. This rifle features a stiff, high-quality HS Precision fiberglass tactical stock with V-block insert. New for 2012 is the .300 Win Mag chambering. (Other chamberings are .338 LM and .308 Win, both introduced last year). The Model 110 FCP HS Precision features a 5-round detachable box magazine, 26″ heavy fluted barrel, muzzle brake, and AccuTrigger. It even comes with scope rail.
In .338 Lapua Magnum, the m110 FCP weighs 10.7 lbs. The .300 WM and .300 Win are somewhat lighter, tipping the scales at 9 lbs. without optics. MSRP for the .300 WM version is $1192.00 — a good value, considering what the stock would cost by itself. The big .338 Lapua Magnum version has a $1549.00 MSRP on Savage’s website.
If you’re on a tight budget, Savage also offers a long-range big-caliber rifle in a polyethylene (tupperware) Accustock. The Model 11/111 Long Range Hunter is a lighter hunting variant that features a composite AccuStock with 3D bedding and a Karsten adjustable cheekpiece. It also has a 5-round detachable magazine, heavy fluted barrel, muzzle brake and AccuTrigger. MSRP for a Long Range Hunter in .300 Win Magnum, is $989.00.
Robert Whitley of AR-X Enterprises visited the JGS booth to review the Oregon-based tool-maker’s offerings for 2012. In the video below, Cary Pugh of JGS Precision Mfg., spotlights some popular JGS products including chamber reamers, headspace gauges, core drills, counter-bores, and more….
ATF Guide to State Gun Laws
The Traveler’s Guide to the Firearm Laws of the Fifty States has sold more than 900,000 copies since it was first released in 1996. The book’s author, Attorney J. Scott Kappas, has written numerous magazine articles and has appeared on television, explaining the unexpected pitfalls that shooters may encounter when traveling with firearms. Along with being an attorney, Mr. Kappas serves as a director on the Board of the Kentucky Firearms Foundation, and Kappas is a Class III firearms dealer.
Design Concerns
MidwayUSA’s Master Catalog has been the “magnum opus” of gun gear catalogs. Over 1,000 pages long, the Master Catalog includes more than 100,000 products. This year, the 35th Annual MidwayUSA Master Catalog is available is a convenient 
If you weren’t able to attend SHOT Show last week, you can still read the Digital editions of all four issues of SHOT Daily, the magazine printed each day of the SHOT Show. You’ll find some interesting product announcements in the SHOT Dailies, plus late-breaking gun industry news.
