What kind of accuracy do you think is possible from a rimfire benchrest rifle? If we said 0.44 MOA you might not be surprised, thinking this was at 50 yards. But how about 0.44 MOA accuracy at TWO HUNDRED yards. Now that’s impressive. Consider this — at 200 yards, a 10 mph crosswind will push that little 40gr bullet 15.3 inches. Here’s the story, which comes from the Land Down-Under, Australia.
A couple seasons back, Australian John Lavaring shot a group at 200 yards that would make most centerfire shooters proud. The five-shot group, with all shots in the center 10-ring, measured just 0.93 inches. That works out to 0.44 MOA at 200 — mighty impressive for a .22 LR. Recorded at a Rimfire Fly Shoot benchrest event in Canberra, Australia, this 200-yard target set two new Australian SSAA National records! John was using ELEY Tenex ammunition.
Congratulations to John Lavaring for a spectacular demonstration of how well a rimfire rig can shoot — even at 200 yards. We rarely shoot our .22 LR rifles past 50 meters. Maybe it’s time to start a Rimfire ELR series, with targets at 200 or even 300 yards. What do you think of the Rimfire ELR idea? Leave comments below.
Anschutz 54 Benchrest Rig
The rifle was a Anschutz model 54 Match in a custom benchrest stock. John’s record-setting rig features a barrel block, which you can see forward of the action. Scope is a Bausch & Lomb BR model. We don’t have the round count on Lavaring’s barrel, but good rimfire benchrest rifles can often get 10,000 rounds (or more) of accurate life.
Rimfire Ballistics at 200 Yards
Some folks may be wondering about .22 LR ballistics at 200 yards. Well, with a 25-yard zero, the 200-yard drop for John’s 40gr Tenex ammo is 54 inches, assuming 0.145 G1 BC and 1085 fps muzzle velocity per ELEY website. And at 200 yards, a 10 mph crosswind will push that little bullet 15.3 inches! We’re told the winds were pretty tricky when Lavary shot his record group. This makes his achievement all the more impressive — we have to admire John’s wind-reading ability.
This ELEY ammo has proven to be exceptionally accurate. Here is a short video showing TEN rounds of Tenex shot from a machine rest with target at 50 meters.
Ten Rounds ELEY Tenex at 50 meters:
Share the post "Amazing Accuracy from Australian .22 LR Rifle at 200 Yards"
You can spend thousands on a rifle, but that expensive hardware won’t perform at its best if you have poor trigger technique. One key element of precision shooting is trigger control. Our friend Kirsten Joy Weiss has produced a good video that shows how to refine your trigger technique for better accuracy. In this video, Kirsten talks about the actual placement of a shooter’s index finger on the trigger. It is important to have the finger positioned optimally. Otherwise you can pull the shot slightly left or slightly right.
Kirsten tells us: “Finger placement on the trigger might not seem like a big deal, but it actually is. The reason for this is because, depending on where your index finger is placed on the trigger, [this] translates to different muscle interactions with the gun.” Watch this video to see Kirsten demonstrate proper finger placement (and explain problems caused by improper finger positioning).
When you pull the trigger, you only want to engage the last section of your finger, in order to avoid unwanted muscle engagement and to achieve a smooth shot. Remember there is a “sweet spot” between the crease (first joint) and the tip of the finger. If you position the trigger in that “sweet spot”, you should see an increase in your accuracy. Don’t make the mistake of putting the trigger in the crease of your finger, as shown below.
Effects of Incorrect Finger Placements
You want to place the trigger shoe between the end of your finger and the first joint. If you place the trigger on the very tip of you finger you’ll tend to push the rear of the rifle to the left when engaging the trigger, causing shots to go right (for a right-handed shooter). On the other hand, if you put the trigger in the crease (first joint), you’ll tend to bring the rear of the rifle to the right, causing shots to fall left. This is illustrated below for a right-handed shooter.
Share the post "Marksmanship 101: Optimal Finger Placement on Trigger"
High-Tech Rimfire Rigs
If you watched the smallbore position and prone shooters at the 2016 Brazil Olympic Games, you couldn’t help but notice the exotic rifles competitors were shooting. There were wood stocks, metal stocks, factory-built rifles, and customized specials. One of the more popular smallbore rifles used at the Olympics and World Cup competition has been the Anschütz model 1913 “Super Match”, fitted with the 1918 “Precise” Alumnium stock. Anschutz does have a newer 2013 model, but this 1913 remains quite popular. The Anschütz model 1913 rifle boasts remarkable adjustability to suit the 3-Position game. The wide range of adjustments allow the the rifle to be customized for the shooter, and modified to best suit each position: prone, kneeling/sitting, and standing.
Customizable rifles like this Anschütz 1913 Super Match “can make a real difference in a shooter’s performance,” explained Jessie McClain of the NRA Competitive Shooting Division. “I went from a decent shooter to making the varsity shooting team my freshman year because of the rifle.” A key feature is the fully adjustable stock, which she called the Porsche of the shooting world. Fully adjustable from the butt plate to the check piece to the hand stop and risers and bolt knobs, the aluminum stock is fully customizable to the athlete … which can be a huge advantage. “Every person is different … a customizable rifle fits anyone. A rifle team can purchase four of these and field a shooting team for years.”
The Modern Anschütz Position Rifle
Smallbore match rifle makers are using modern materials in response to the need for greater adjustability (and enhanced accuracy). One of the most popular designs is the Anschütz model 1913 position rifle with a “1918 ALU Precise” brushed aluminum stock. This looks like it has been crafted in an aircraft plant.
The Anschütz 1913 Precise — Prone Shooting with Ace Marksman
In this 7-minute video, you can see details of an Anschütz 1913 Super Match Rifle (ALU Precise 1918 stock) for the first two minutes. Then the video shows the rifle being shot from prone, viewed from multiple angles (right, left, overhead, front). Watch at the 5:15 time-mark to see how the marksman steadies his rifle for the shot. This video offers good details of feeding and prone holding.
NEXT Generation — the Anschütz Model 2013
This video shows the latest-generation Anschütz model 2013 match rifle with aluminum 2018 stock being used in a benchrest match with riflescope. Note that the 2013 action is slab-sided and silver, rather than cylindrical and blued like the older model 1913. You’ll see good close-ups of the shooter working the action and feeding rounds. Watch closely and you can see the take-up, trigger pull and firing at 00:32 and 00:57 time-marks.
Here is an interesting project by one of our Forum members. Martin C. (aka “Killick”) modified an Anschutz 1411 Match 54 rimfire prone stock to become a comfortable, great-tracking F-Class Open Division Stock. No Killick didn’t sacrifice a perfectly good rimfire rifle for this project — he bought the Anschutz stock by itself on eBay, then transformed it…
Killick explains: “This project started about seven years ago. I bought the Anschutz prone stock on eBay and whittled it a bit into a Palma rifle with a Barnard action and block and a Doan Trevor cheek piece and scope rail. Then about two years ago I decided to re-task the stock/action assembly into an F-Open rig. With more whittling, gluing, sanding, body fillering, sanding, filling, sanding, more sanding…and sanding, forming, priming, sanding, painting, waiting, painting, painting…painting and before you know it, Bob’s your uncle.”
Here is the eBay-sourced Anschutz 1411 stock, with new high-gloss blue finish, as initially modified for use in Killick’s centerfire Palma rifle. Looks nice!
Next step was the addition of a 3″-wide wood fore-end for F-Open duties with front rest:
Almost done here… just needs priming and final painting:
Here is Killick’s completed F-Open rifle with its much-modified Anschutz stock now finished in fire-engine red lacquer. This image shows the detail of the grip and customized cheekpiece.
Gunsmith/stockmaker Doan Trevor created a lovely, one-of-a-kind silhouette stock for an Anschutz rimfire action. Built as a true custom design, this stock combines ideal standing position ergonomics with light weight — the entire stock weighs a mere two pounds. This project really showcases Doan’s remarkable skills with wood. Read the full story about this project (with more photos) at DoanTrever.com.
Doan explains his design process: “A customer came to me wanting to know if I could build a silhouette stock that was 2 pounds or less. I used the Koa wood because it is a lower specific gravity than Walnut (which makes it lighter) and stronger. I was still able to use pillar bedding and keep the weight down. The fore-end could be shortened to reduce the weight even more.
Since the drops on a silhouette rifle are different than a prone rifle, I kept the pistol grip from the prone rifle which is comfortable and tried to come up with a higher cheek piece and more drop to the buttplate. All of this required lots of hand carving.”
Share the post "Doan Trevor Creates a Lightweight Wonder from Koa Wood"
“The National Smallbore Outdoor Rifle Championships, born in the aftermath of World War I, celebrates its Centennial this year. Since 1919, smallbore competitors have gathered 94 times at seven locations to contest for the champion’s laurels.” (Hap Rocketto for Shooting Sports USA). 2019 marks the 100-year anniversary of the NRA Smallbore Championships — the Centennial of this historic rifle competition.
Over the past 100 years many things have changed including the course of fire. In the 1920s, “The shooting program would have modern-day competitors scratching their heads. There was an à la carte menu of matches, which were shot at 50 and 100 yards and with re-entry matches a regular feature. There was a good deal of long-range shooting at 150, 175 and 200 yards. On occasion there was a position match but, by and large, the courses-of-fire were all prone.” READ History of Smallbore Championships.
The Championships are limited to 200 competitors per Championship (Metric 3-P, Conventional 3-P and Conventional Prone). Competitors MUST have a current NRA Classification Card. Competitors will receive squadding after registration and payment of entry fee; a confirmation will be sent confirming registration and squadding. Shooters who wish to shoot near each other must register together.
Situated just 10 miles away from Elkhart, Indiana, the Wa-Ke’-De Rifle Range is located on Highway 120 just a mile and a half east of Bristol. Nestled among pine trees, the range boasts 100 covered firing points laid out on an asphalt firing line.
The 2019 Smallbore Rifle Championship will be held at the Wa-Ke’-De Range in Bristol, Indiana.
Recent Move from Camp Perry to Indiana
After many years at Camp Perry, Ohio, the Smallbore Championships event was relocated to Indiana to accommodate the World Long Range Shooting Championships at Perry. The move was made in 2014 to the St. Joseph Valley Rifle and Pistol Association’s Wa-Ke’-De Range, Bristol, Indiana. There will be yet another move in 2020 — the NRA smallbore championship will be held in Camp Atterbury Indiana. So, in 2020 the Smallbore Championship will once again be held alongside the High Power Rifle and Pistol National Championships, with three events at Camp Atterbury.
Share the post "Smallbore Centennial — The 100th Nat’l Smallbore Championships"
SHOT Show 2019 kicked off Tuesday, with tens of thousands of exhibitors, media members, and invitees streaming into the Sands EXPO Center in Las Vegas. This firearms industry trade show just gets bigger every year. We visited many of our favorite vendors including Capstone Precision Group (Berger, Lapua, SK, Vihtavuori), McMillan Fiberglass Stocks, Zeiss Optics, Redding Reloading, SIG Sauer, Smith & Wesson, Anschutz, and Target Vision/Longshot.
Here are some quick highlights from Day One of SHOT Show, a little bit of everything: Rifles, pistols, ammo, reloading gear, and some notable shooters.
Capstone Precision Group: Berger, Lapua, SK and Vihtavuori
Capstone Precision Group showcased new products from its four companies: Berger Bullets, Lapua, SK, and Vihtavuori. Lapua showcases cartridge brass and loaded ammo, including new 6.5 Creedmoor ammo with the ultra-consistent Scenar-L bullets. Capstone also told us to expect large quantities of brass to be arriving in the USA soon, including the high-demand 6mmBR brass.
Berger will release new loaded ammo in Lapua brass. Options will include 6mm Creedmoor, which should be popular with the PRS crowd. In addition, Berger will offer an impressive new line of solid projectiles. These ultra-high-BC ELF Match Solids have optimal shapes to stay supersonic at longer ranges. They are an impressive option for the Extreme Long Range game.
McMillan — 6012-Yard Shot with ELR Rifle
At the McMillan booth, members of the Global Precision Group (GPG) Team showcased an impressive .416 Barrett ELR rifle. Team leader Paul Phillips explained how the team managed (on the 22nd shot) to hit a 48″x32″ target at the incredible distance of 6012 yards. Our friend Derek Rodgers, reigning F-TR World Champion, told us that this shows how the ELR sport has evolved. The rifle features a McMillan ELR Beast stock with a Bartlein Barrel on a massive BAT 50 action.The .416 Barrett rounds were loaded with 550 grain Cutting Edge bullets.
A Tacom Charlie/Delta TARAC prism system was fitted in front of the Nightforce scope, allowing the team to put over 625 MOA of elevation on the shot while still being able to see the target. The ballistics numbers for this 6012-yard shot are pretty mind-boggling: 625 MOA of elevation was required, and the bullet was in the air for 17.1 seconds!
New Products from LongShot Target Cameras (aka TargetVision)
Our first stop at the show was at the LongShot Target Cameras booth. Here we met with company founder, Clay Rhoden, the bright young man who has created the best-performing wireless target cameras on the market. Most folks know Rhoden’s company as TargetVision, but Clay said they are re-branding as LONGSHOT Target Cameras, to help emphasize the extreme range capabilities of his latest systems (the top tier Longshot cameras can operate out to one mile and beyond). Clay showed us two new products, the latest target camera (with easy-to remove battery pack), and a special camera that will transmit video from a spotting scope to your mobile devices. See the latest products at www.longshotcameras.com.
Light-Weight Camo Hunting Rifles from Weatherby
Hunters can spend hundreds of dollars on the latest camouflaged clothing in order to blend in to their environment, so why do gun makers continue to produce shiny hunting rifles? Well, this is one thing Weatherby has gotten right with the latest Weatherby Mark V ultra lightweight rifles. The rifle has the option of a rugged, matte Cerakote finish on action, bolt, and barrel, effectively eliminating glare. And did I mention it’s light weight? The full rifle weights a mere 5.75 pounds for non-magnum calibers. Weatherby guarantees sub-MOA accuracy with factory ammunition out of the box. Add a decent lightweight scope and this rifle is ready for a long backcountry hunt.
Hot New Sub-Compacts from SIG Sauer, Kimber, Walther
For shooters who carry concealed or simply prefer a more compact pistol, three new handguns really stood out at shot show 2019: the SIG Sauer P365, Walther CCP M2, and the Kimber EVO. All three guns had a similar weight and feel at roughly 1” width, 6” length, and 1 lb when empty. The P365 has an advantage with a 10 + 1 round capacity, compared to the 7/8 of the EVO and CCP M2, but the CCP M2 is more competitively priced with an MSRP starting at $469. Retail for the P365 starts at $599 and the Kimber a surprising $925. Expect to see these guns in stores between spring and summer of 2019.
Smith & Wesson — Handguns Galore and New T/C Performance Center LRR
Smith & Wesson is not just a handgun company. It markets rifles under its own brand name as well as via its Thompson Center Arms (T/C) division. At SHOT Show 2019 we saw the T/C Performance Center LRR (Long Range Rifle). With a $1211.00 MSRP, this offers great “bang for the buck” for shooters competing in PRS production division. These rigs feature a modular aluminum chassis, 24″ barrel, and adjustable cheekpiece. Available chamberings include .243 Win, 6.5 Creedmoor, and .308 Win. And of course S&W continues to make great wheelguns, include some very BIG magnum revolvers:
At the Anschutz Booth with Company President, Jochen Anschutz
The German company Anschutz remains a world leader in rimfire rifles. The company’s match rifles have captured countless Gold Medals in Olympic target shooting and biathlong competition. Here company President Jochen Anschutz (left) shows the latest Biathlon rifle, featuring the impressive Fornter straight-pull action. With Jochen is Steven Bolter, North America Custom Shop Director. We were pleased to hear that Anschutz will be offering a new line of 17 HM2 (Mach2) rifles soon. That is an effective varmint round that’s considerable less expensive than 17 HMR.
In another month or two many Eastern and snow-belt shooting ranges halt operations for the winter. If you’re an avid rifleman who enjoys shooting regularly, the dark days of winter can bring withdrawal pains. The closure of outdoor ranges can mean months of forced inactivity… unless you have an all-weather indoor shooting solution.
Some clubs maintain their own indoor air rifle ranges where you can continue to shoot and train throughout the winter. If there are no such facilities nearby, Creedmoor Sports now offers a great solution for those who want to shoot indoors — even in your own basement or garage.
Creedmoor’s patented 10m Air Gun Range provides a target holder and a curtain-type backstop capable of stopping pellets with a muzzle velocity up to 600 fps. The target boxes can be positioned at various heights for prone, kneeling, and standing. Creedmoor says the hardened steel target boxes provide 100% containment for any pellet passing through the target.
The 10M Air Gun Range is sold as a 3-station configuration for $1514.00 (item 3AGR), or as a one-station (single-point) range for $325.00 (item AGR-SINGLE). Creedmoor’s Air Gun Range is a proven, heavy duty product — the only Air Rifle target system ever tested and approved by the U.S. Military. This system is now being used in more than 800 schools nationwide, as well as the CMP shooting facility in Alabama. The 3-station range easily dis-assembles for transport and storage, fitting inside a 34″ x 10″ x 8″ carry duffle. The one-station range measures 84″ high x 30″ wide when assembled.
The Portable Air Gun Range comes with a durable curtain/ backstop that sets up quickly and easily. Velcro edging allows multiple curtains to be joined together. The curtain provides ample stopping power for air pellets. However, this is NOT to be used with high-energy pneumatic hunting rifles (such as the .357 Benjamin Rogue) or rimfire or centerfire rounds. This is for standard airguns only. That could be a $100 Crosman, or a $3600.00 Model 9003 S2 Anschutz:
Share the post "Train Indoors with Portable Air Gun Range from Creedmoor Sports"
High-Tech Rimfire Rigs
If you watched the smallbore position and prone shooters at the 2016 Brazil Olympic Games, you couldn’t help but notice the exotic rifles competitors were shooting. There were wood stocks, metal stocks, factory-built rifles and customized specials. Why are there are so many different design features and stock types? To answer this question, the NRAblog’s editors called on Jessie McClain of the NRA Competitive Shooting Division.
“The customized rifles, like the Anschütz you showed me, can make a real difference in a shooter’s performance,” explained McClain. “I went from a decent shooter to making the varsity shooting team my freshman year because of the rifle.” As Jessie explained, one new feature out there is the adjustable stock, which she called the Porsche of the shooting world. Fully adjustable from the butt plate to the check piece to the hand stop and risers and bolt knobs, this component is fully customizable to the athlete … which can be a huge advantage. “Every person is different … a customizable rifle fits anyone. A rifle team can purchase four of these and field a shooting team for years.”
The Modern Anschütz Position Rifle
Smallbore match rifle makers are using modern materials in response to the need for greater adjustability (and enhanced accuracy). One of the popular new designs is the Anschütz model 1913 position rifle with a “1918 ALU Precise” brushed aluminum stock. This looks like it has been crafted in an aircraft plant.
Great News — There will be serious smallbore rifle competition at Camp Perry this year (though the NRA National Smallbore Championships will still be held at Camp Wa-Ke-De in Indiana). The CMP will host a new series of smallbore events in July at Camp Perry, the Mecca of competitive shooting in the USA. This way smallbore competitors can enjoy the experience of shooting on the famed Camp Perry ranges. Smallbore competitions have been slotted into the Camp Perry National Match schedule July 16-22, 2018. These smallbore events include: 3×40 two-day event; 3P Team Match; Two-Day Prone event; Elimination Prone event; Prone Team Match; USAMU Training Clinic.
The smallbore matches will be fired on Rodriguez Range at Camp Perry under a covered firing line. Shooters Technology will provide a scoring App that allows instant scoring for quick results. Finals will be conducted on the CMP’s Electronic Targets installed on the Camp Perry Petrarca Range.
Learn more about the CMP’s smallbore rifle events at the 2018 National Matches on the CMP website. In addition to an event schedule, the 2018 CMP Smallbore Rifle Competition Rules is also available online. To register for the Camp Perry smallbore events, or to review the 2018 Rulebook, visit http://thecmp.org/competitions/cmp-national-matches/smallbore-matches/.
NATIONAL MATCHES at CAMP PERRY
The National Trophy Pistol and Rifle Matches have been a continued tradition of marksmanship excellence every summer since 1903. Moved to Camp Perry, Ohio, in 1907, the event now draws well over 6,000 annual visitors. For any serious marksman, competing at the National Matches at Camp Perry if a definite “bucket list” item, an experience that creates life-long memories. Participants range from novices to the world’s top smallbore and high power shooters.
Here’s a video from 2011 when the NRA Smallbore Championships were held at Camp Perry. It is great to see smallbore events return to Camp Perry in 2018.
Share the post "CMP Adds Smallbore Events to National Matches at Camp Perry"
You can spend thousands on a fancy new rifle, but all that expensive hardware won’t perform at its best if you have poor trigger technique. One key element of precision shooting is trigger control. Our friend Kirsten Joy Weiss has produced a good video that shows how to refine your trigger technique for better accuracy. In this video, Kirsten talks about the actual placement of a shooter’s index finger on the trigger. It is important to have the finger positioned optimally. Otherwise you can pull the shot slightly left or slightly right.
Kirsten tells us: “Finger placement on the trigger might not seem like a big deal, but it actually is. The reason for this is because, depending on where your index finger is placed on the trigger, [this] translates to different muscle interactions with the gun.” Watch this video to see Kirsten demonstrate proper finger placement (and explain problems caused by improper finger positioning).
When you pull the trigger, you only want to engage the last section of your finger, in order to avoid unwanted muscle engagement and to achieve a smooth shot. Remember there is a “sweet spot” between the crease (first joint) and the tip of the finger. If you position the trigger in that “sweet spot”, you should see an increase in your accuracy. Don’t make the mistake of putting the trigger in the crease of your finger, as shown below.
Effects of Incorrect Finger Placements
You want to place the trigger shoe between the end of your finger and the first joint. If you place the trigger on the very tip of you finger you’ll tend to push the rear of the rifle to the left when engaging the trigger, causing shots to go right (for a right-handed shooter). On the other hand, if you put the trigger in the crease (first joint), you’ll tend to bring the rear of the rifle to the right, causing shots to fall left. This is illustrated below for a right-handed shooter.
Share the post "Marksmanship Fundamentals: Finger Placement on Trigger"
Here is an interesting project by one of our Forum members. Martin C. (aka “Killick”) modified an Anschutz 1411 Match 54 rimfire prone stock to become a comfortable, great-tracking F-Class Open Division Stock. No Killick didn’t sacrifice a perfectly good rimfire rifle for this project — he bought the Anschutz stock by itself on eBay, then transformed it…
Killick explains: “This project started about seven years ago. I bought the Anschutz prone stock on eBay and whittled it a bit into a Palma rifle with a Barnard action and block and a Doan Trevor cheek piece and scope rail. Then about two years ago I decided to re-task the stock/action assembly into an F-Open rig. With more whittling, gluing, sanding, body fillering, sanding, filling, sanding, more sanding…and sanding, forming, priming, sanding, painting, waiting, painting, painting…painting and before you know it, Bob’s your uncle.”
Here is the eBay-sourced Anschutz 1411 stock, with new high-gloss blue finish, as initially modified for use in Killick’s centerfire Palma rifle. Looks nice!
Next step was the addition of a 3″-wide wood fore-end for F-Open duties with front rest:
Almost done here… just needs priming and final painting:
Here is Killick’s completed F-Open rifle with its much-modified Anschutz stock now finished in fire-engine red lacquer. This image shows the detail of the grip and customized cheekpiece.
Anschutz 54 Benchrest Rig
High-Tech Rimfire Rigs
In another month or two many Eastern and snow-belt shooting ranges halt operations for the winter. If you’re an avid rifleman who enjoys shooting regularly, the dark days of winter can bring withdrawal pains. The closure of outdoor ranges can mean months of forced inactivity… unless you have an all-weather indoor shooting solution.
