There is a new player in the field of elite die-makers: Whidden Gunworks. John Whidden’s Georgia-based company is producing outstanding full-length sizing dies and micrometer-top seater dies for 7/8-14 thread presses. The dies look great, work great, and produce very straight and accurate ammo. The Whidden dies are finished beautifully inside and out. They are priced competitively and they are available for popular “extreme accuracy” cartridges such as the 6PPC, 6mmBR, 6mmBRX, 6 Dasher, 6XC, 6.5×47, .260 Rem, .284 Win, and .308 Win (and more). If you are looking for a die set for your new precision rifle, you should definitely check out the Whidden dies. Two-die set, FL Sizer and Micrometer-top Seater, costs $184.99. Sizer die alone is $74.99, while Seater die alone is $109.99.
Many of our Forum members have started using Whidden dies — and they are reporting very positive results. I personally own and use a set of Whidden dies, and I am very, very impressed with them. Here’s my report:
Editor’s Report on Whidden Dies I have a set of Whidden Gunworks dies for my personal 6BRDX (a chambering similar to 6 Dasher but with longer neck). The dies are excellent and they produce very straight ammo. My loaded rounds (made with a Whidden bushing-type FL sizer and Whidden micrometer-top seater) are showing less than .0015″ run-out measured on the bullet, with the majority closer to .001″ run-out. (This is with Lapua Scenar L bullets, which have great jacket uniformity and concentricity.)
One thing I immediately noticed about the Whidden seater die is that there is a very close correspondence between the seater “hash marks” and true changes in seating depth. By this I mean when you dial a value change of 10 on the micrometer scale, you get very close to a .010″ change in seating depth. It is not perfect, but it is definitely more precise than most other micrometer-top seater dies I’ve used (both hand dies and 7/8-14 thread screw-in types).
Cartridges loaded with my Whidden sizer and seater dies have proved very accurate. My 6BRDX is shooting in the mid-ones for five shots at 100 yards. I also have a micrometer-top Wilson inline seater die that was custom-bored with my chamber reamer. As far as I can tell, the ammo loaded with the screw-in Whidden seater is every bit as accurate as rounds loaded with the Wilson die using an arbor press. Additionally, with the Whidden micrometer die, I can hold extremely tight tolerances on base-to-bullet-ogive lengths.
In the past, with my 6mmBR, I favored an inline die because I thought it offered better control over seating depth. But given how well the Whidden seater works, I’m not sure I’d gain anything with my Wilson hand die. At least when used with a quality Harrell’s benchrest press, the Whidden seater gives up little or nothing to the hand die, and that’s big news in my experience.
You will like the look and feel of these Whidden dies. The finish inside and out is very, very good — the dies have a quality feel and run very smoothly. Both the sizer and seater have a fluted section — this offers a better “grip” when you’re screwing in the dies. The outside of the seater has a smooth, gloss-anodized finish — it exudes quality. The markings on the seater’s micrometer ring are crisp and very legible, with large, high-contrast white-on-black lines and numbers.
One other very cool feature of the Whidden sizing dies is that custom-sized tapered expanders will soon be offered. Whidden plans to offer expanders in .0005″ (one-half thousandth) increments. This is great if you have, say, a .265 bushing and a .266 bushing but you want just a little less neck tension than the .265 offers. With the tapered expander, I can use a 0.265 bushing followed by an 0.2655 expander — allowing more precise control of neck “grip”.
Whidden Die Features
Die Dimensions well-matched to PT&G reamers used for match chambers.
Sizing dies spec’d for easy chambering and extraction without overworking brass.
All sizers include shoulder datum collar to measure shoulder “bump” and headspace.
Neck bushing or no-neck bushing configurations.
Bushing dies use standard Redding/Wilson type bushings.
Neck diameter of non-bushing FL sizers can be set to customer specification.
Extended threads on short cartridge sizer dies such as BRs.
Coming soon: custom expander balls (in half-thousandth increments) to adjust neck tension and provide minimum working of the case neck.
Seater: Floating sleeve on micrometer seater enhances concentricity of loaded rounds.
Seater: Large, high-contrast markings for easy adjustment.
Custom Dies for Wildcats or Your Cartridge
Custom-made for your wildcat or standard cartridge.
Can work from fired brass or a chamber drawing to match your chamber exactly.
Neck-bushing die, or no-bushing die with neck diameter bored to customer specification.
Available Die Sets
Here is the current caliber list. Micrometer seaters are available in all calibers listed below except 22BR and 22 BRX.
John Whidden Talks about Sizers, Seaters, and Expanders
There are two sides to our die business. First we are stocking dies in many calibers that are of interest to those who visit this website (such as the 6PPC, 6mm Dasher, 6.5×47 Lapua, .260 Rem, 7mm Shehane, .308 Winchester). These dies are a good fit to the “match chamber” reamers and very few people with these calibers should have to have “Pure Custom” dies made. We have both sizers and micrometer-top seaters ready to go for the many cartridge types listed above. The sizer dies will include a shoulder datum collar that makes it easy to measure shoulder “bump” during the full-length sizing process. This is important to control headspace precisely.
On the “Pure Custom” side, we have a huge amount of flexibility. We can make one-of-a-kind sizers and seaters for wildcats in a short period of time and at an excellent price. We can work with the customer to make full-length sizers, neck sizers, shoulder bump dies, small base dies, or most anything else they can need. We can of course provide micrometer-top seaters for these cartridges as well. We can make non-bushing sizers with specific neck inside diameters tailored to customer specifications.
We will also be offering custom-sized expanders. These expanders will fit our dies as well as Redding dies. Our tapered expanders will be available in .0005” (one-half thousandth) increments for the common calibers. In our shop we have had excellent results using expanders in the dies as long as the expanders provided the correct amount of neck tension and didn’t overwork the brass. Expanders have gotten a bad reputation in recent years but we find them to be excellent tools when the same precision is applied to their use that careful handloaders apply to the rest of their process. Expanders can be most valuable for those who choose not to neck-turn their brass (because the expander pushes neckwall variations to the outside).
One last thing — many gunsmiths with their own wildcats (or “specialty” chambers) have asked us to provide dies for their customers. We gladly do batches of custom dies and encourage gunsmiths to contact us. — John Whidden
John Whidden, multi-time NRA Long-Range Champion, runs a stock-building enterprise, Whidden Composite Works. This is a sister operation to Whidden Gunworks, which crafts V-Blocks and other specialized gun components and reloading tools. John Whidden’s stock-making business, the Composite Works, is producing a series of high-quality, V-Block-equipped stocks using state-of-the-art composite construction. The first two stock designs, the models 105 and 140, are general-purpose stocks that will work for everything from Elk hunting to tactical comps. Both models are currently available in multiple color choices: Desert Sand, Forest Green, Flecked Black, Silver, and Custom Mix. Other colors may be offered in the future.
The Whidden Composites model 105 has a familiar hunting rifle profile. The model 140 is designed as a hunting stock incorporating tactical features for shooters who prefer a more vertical strong-hand grip. Both include the Whidden V-Block (in configurations for right-handed short and long actions based on the Rem 700 bolt pattern), three installed sling studs, and a Pachmayr® Decelerator pad.
Model 105 Offers Hunters a Familiar Design with Enhanced Rigidity and V-Block
The Whidden 105, priced at $360.00, is shaped along the lines of a classic North American hunting rifle. But under the skin it is a greatly enhanced platform. Solid-core construction gives a solid feel that is often absent on lesser synthetic/plastic stocks. The V-Block system is integrated, the composites used increase stiffness, and the material is impervious to weather. The V-Block system allows the owner to easily use multiple barreled actions in the same stock.
Model 140 Provides Improved Ergonomics for Prone and Tactical Shooters
The Whidden 140 offers the ergonomic advantages of a vertical grip and raised comb for eye-scope-target (EST) alignment. For many shooters, the vertical grip feels more natural in prone position, and allows a very solid “hard hold” for a heavier-recoiling caliber. The semi-beavertail fore-end will rest solidly on sandbags, while the radiused edges still allow for comfortable grip and carrying. Whidden model 140 stocks are available for $400 in Desert Sand, Forest Green, and Flecked Black.
Model 175 Whidden Stock Design
In addition to the models 105 and 140, John produces a model 175 stock featuring an (optional) adjustable cheekpiece and other enhancements favored by tactical, prone, and F-Class competitors. The basic model 175 stock includes the V-Block, three sling studs, and a Pachmayr® Decelerator pad. Options include Foreend Rail, Adjustable Cheek Piece, and Butt Spacers. Model 175 stocks start at $549.00 plus shipping. For more information on the Whidden models 105, 140, and 175, visit Whidden Composite Works or call (229) 686-1860.
Share the post "V-Block, Composite Rifle Stocks from John Whidden"
Moving into the second day of the Long-Range National Championships, five shooters are clustered at the front with equal scores of 598 points. Leading the way, based on X-count, is our friend and Forum member John Whidden (598-36X). Just three Xs back with 598-33X is Bryan Litz, Berger’s Chief Bullet Designer and Ballistician. We’re pleased to see Forum member John Friguglietti, aka Mudcat, ranked fourth. Among the top ten, in the preliminary standings, are shooters from international squads. It’s good to see foreign competitors on the firing line at Perry this year.
It’s no surprise that John Whidden is leading the way. He’s won the Long Range Championship before, and he finished in second place last year. In the past John has campaigned a .243 Winchester in the Long-Range Nationals. This chambering has a reputation for short barrel life, but as John explained: “When the National Championship’s at stake, I can afford to use a fresh barrel for the match. If the .243 offers the right combination of accuracy, low recoil, and performance in the wind, I’m not that concerned about barrel life.”
Watch Slide Show from Long Range Championship
Share the post "Five Shooters in Long-Range Championship Tied on Points"
Highs in the low 60s and puddles from yesterday’s rain created a chilly, muddy atmosphere for the start of the Long Range Championships. The Band of Brothers Trophy Match was the first match fired. The early scores show that the elite shooters, such as past Long-Range Champion John Whidden, brought their ‘A’ game, and are able to handle the cooler weather and cloudy skies. There were a number of 200s shot on the range this morning at the Band of Brothers match.
Band of Brothers Trophy Match
1. John Whidden, 200-15x
2. Shane Barnhart, 200-15x
3. Serge Bissonnette, 200-11x
4. Robert Steketee, 200-11x
5. David Calvert, 200-11x
Watch Slide Show from Long Range Championships, Day One
Share the post "Long Range Championships Start in Soggy Conditions at Perry"
You may not know it, but Whidden Composites, run by two-time National Long-Range Champion John Whidden, produces a nice series of hunting, F-TR, match, tactical, and general purpose gunstocks. These high-grade stocks all feature advanced composite construction, Whidden Gunwork’s signature V-blocks, three installed sling swivels, and a Pachmayr® Decelerator pad. Epoxy construction ensures that these stocks are stiff AND light. John explains: “All of our stocks are crafted with epoxy from core to finish. The core is an expanded epoxy blended to a density that perfectly balances weight, strength, and rigidity. The outer shell is an epoxy coating that is incredibly durable — but light enough to carry all day. The textured epoxy external coating forms a handsome, tactile finish that is great to hold.”
Built-in V-Block Standard, with Many Options Available
The latest stock design from Whidden Composite Works is the model 175 Tactical/F-TR stock. This unit offers a long, rigid fore-end, with a straight comb and straight buttstock toe. This makes it very well-suited for prone shooting with a rear sand-bag and front bipod. The design is ambidextrous so it can be used by either right- or left-handed shooters (with appropriate inlet). Five color choices are offered: black, silver, reddish brown, tan, and green. Base price, inletted for Rem 700 long- or short-action, is a reasonable $549.00 — remember that includes deluxe buttpad and the versatile V-block which allows one stock to be used with multiple barreled actions.
For the model 175, Whidden offers a number of options: $100 Fore-end Rail, $125 Adjustable Cheek piece, $135 Rear Monopod, and $75 Picatinny Bipod Rail. The sling attachments can also be flush-mounted for $10.00 per slot. For just $30.00 over the base price, Southpaws can order a left-hand version of the model 175 stock. Whidden Composites can also inlet for detachable bottom metal and for non-Rem actions (Tikka, Winchester, Sako, etc.), but it does cost more for these non-standard inlets.
Product Tip by EdLongrange. We welcome reader submissions.
Share the post "Whidden Composite Works $549.00 F-TR and Tactical Stock"
At the 2010 SHOT Show, we had the unique opportunity to corner three “superstars” of High Power shooting, and solicit their wind-reading secrets. In the three videos below (in alphabetical order), Carl Bernosky (9-Time Nat’l High Power Champion), David Tubb (11-time Nat’l High Power Champion and 7-time Nat’l Long -Range Champion), and John Whidden (2-Time Nat’l High Power Long-Range Champion) shared some of the wind-doping strategies that have carried them to victory in the nation’s most competitive shooting matches. This is GOLD folks… no matter what your discipline — be it short-range Benchrest or Long-Range High Power — watch these videos for valuable insights that can help you shoot more accurately, and post higher scores, in all wind conditions.
We were very fortunate to have these three extraordinarily gifted champions reveal their “winning ways”. These guys REALLY know their stuff. I thought to myself: “Wow, this is how a baseball fan might feel if he could assemble Babe Ruth, Hank Aaron, and Ted Williams in the same room, and have them each reveal their hitting secrets.” Editor’s Note: These interviews were conducted before Bernosky and Tubb won their most recent National Championships so the introductions may list a lower number of titles won.
Share the post "Bernosky, Tubb, and Whidden Explain How to Read the Wind"
Our friend John Whidden accomplished another milestone in his storied shooting career. This time John topped an extremely competitive field of Palma shooters at the World Rifle Championships in Australia. Earlier today Whidden nailed a 100-13V on the final day of the Queen’s Prize Match to win the three-day event with a 399-46V Aggregate. (A “V” is equivalent to the “X” in American matches). John’s Day 1 score of 150-012V and Day 2 tally of 149-21V were enough to overtake early Palma Teammate Norman Anderson, and hold off the strong-finishing SGT Sherri Gallagher on Day 3.
When the dust had settled, John took the Queen’s Prize Match by a single point over runner-up Sherri Gallagher. In fact, Sherri and the 3rd, 4th, 5th and 6th-place finishers all had identical 398 scores, so V-counts were used as tie-breakers. Yes this match was that close.
By tradition, fellow competitors carried Whidden and his green John Deere-sashed rifle to the awards in a ceremonial sedan-chair. John seems to be enjoying the ride. The above photo was taken by fellow Palma Teammate Dave Cloft. Overall, Americans did very well in the Queen’s Prize Match, taking four of the Top 10 places. South Africa, a strong force at the last World Championship, had three shooters in the Top 10. Here’s how the Top 10 finished in the Queens Match:
1. John Whidden, USA: 399-046V
2. Sherri Gallagher, USA: 398-054V
3. Jim Bailey, Australia: 398-044V
4. Petrus Haasbroek, South Africa: 398-043V
5. Norm Anderson, USA: 398-043V
6. Colin Cole, North Arm: 398-039V
7. Andre Du Toit, South Africa: 397-048V
8. Johannes Du Toit, South Africa: 397-048V
9. Geoffrey Grenfell, Bendigo: 397-048V
10. Tom Whitaker, USA: 397-047V
It looks like the Yanks are picking up steam in the World Rifle Championships, which continue with both individual and team events through October 22nd. (We’ll have a report on the hot-shooting USA Young Eagles team tomorrow.)
The NRA National Long Range Championship commenced Saturday, August 13 with the Band of Brothers Trophy Match followed by the Mustin Trophy Match. All Long Range matches are shot from the prone position from ranges between 800 and 1,000 yards. The Band of Brothers Match course of fire was twenty shots at 1,000 yards. Saturday’s second event, the Mustin Match, was also shot slow fire in the prone position from 1,000 yards. Mustin competitors have more time than during the High Power Championships, being allotted 30 minutes to get off their 20 shots for record on the Long Range targets.
Whidden Leads LR Championship, Not Dropping a Point So Far
Last year John Whidden won the Mustin Match with a 198-11X and a shoot off score of 100-8X. Whidden won again this year, shooting 200-9X to edge David Tubb by two Xs. With his Mustin win, and his second-place showing in this year’s Band of Brothers Match, Whidden is leading the 2011 Long Range Championship so far, not dropping a point in either event. Listed below are initial results:
Band of Brothers Trophy Match
1. Lance Dement, 200-14X
2. John Whidden, 200-14X
3. Tyrel Cooper, 200-13X
4. Phillip Crowe, 200-12X
5. Justin Skaret, 200-12X
Mustin Trophy Match
1. John Whidden, 200-9X
2. David Tubb, 200-7X
3. Norman Houle, 199-12X
4. Rodrigo Rosa, 199-11X
5. Sherri Gallagher, 199-11X
While visiting the Forster Products booth at SHOT Show yesterday, we had a chance to chat with three-time National High Power Long Range Champion John Whidden. John was his amiable self as usual, sharing his match-winning experience with Kelly Bachand, a young .308 Palma shooter. John and Kelly are squadded together on the U.S. National Team that will be going to Australia for the World Full-bore Championship later this year.
John shared his thoughts on shooting the .243 Win in competition and he also discussed the advantages of a V-Block system in a prone rifle. With a good V-Block you can use the same stock with different barreled action. You can even change between centerfire and rimfire in the same gun. John uses V-Blocks in his own rifles, and Whidden Gunworks makes V-Blocks for Remington, Rem Clone, and Savage Actions.
Share the post "SHOT Show Report: Long-Range Champ John Whidden"
John Whidden of Whidden Gunworks used a collection of .243 Winchester and .308 Win rifles to win his third NRA National Long-Range Championship this week at Camp Perry. We had a chance to discuss Whidden’s winning guns during a long telephone conversation with John yesterday, as he motored back to Nashville, Georgia. John revealed some interesting facts about his long-range arsenal.
For the “Any sights, Any Rifle” and “Iron Sights, Any Rifle” stages of the Long-Range Championship, John used three different .243 Win rifles. He shoots the same load in all his .243s: Berger 105gr VLD bullets (moly-coated) with N160 powder and PMC (Russian) primers. The bullets are seated very long, with about .001″ neck tension, so the bullets “soft-seat” themselves into the rifling as he closes the bolt. This way he can use the same ammo in different guns and the bullets always find the same seating depth relative to the rifling. John uses a very stout load of N160 that drives his Berger 105s at about 3,300 fps. No that is not a misprint. John launches thin-jacket 105s at 3,300 fps and he doesn’t have an issue with bullet blow-ups. Moly helps keep the heat down, but John’s Broughton 5C (canted land) barrels are key. These are gentler on the jackets than barrels which have very tall or sharp lands.
John shoots the Berger 6mm 105gr VLDs because they are a proven commodity that seem to work in a variety of barrels and cartridges: “We need something that is very reliable from an accuracy standpoint, match in and match out. The 105s are more reliably accurate over a range of different cartridges, barrels, and conditions. I’ve considered using the 115s, but I’ve heard mixed results. Across the whole range of variables, the 105s and 107s always seem to work for people but I’ve heard a lot of mixed results with the 115s.”
At 3,300 fps, the 105s deliver ballistics that are hard to beat, according to John: “My .243 shoots inside a 6.5-284 with 142s. Nothing out there is really ahead of [the .243], in 1000-yard ballistics unless you get into the short magnums or .284s and those carry a very significant recoil penalty. In the past I did shoot the 6.5-284. I went to the .243 because it had similar ballistics but had much less recoil. It doesn’t beat me up as much and is not as fatiguing.
With the .243… there’s no tensing-up, no anticipating. With the reduced recoil, I can break and shoot very good quality shots. I find I just shoot better shots with the .243 than I ever did with the 6.5-284.”
John’s primary “Any Sights” .243 is built on a Winchester m70 action, it has a Broughton 32″, 1:8″ twist 5C (canted land) barrel. This gun shot very well, but he did have a firing pin issue during the Remington Band of Brothers match on Day 1 of the Long-Range competition, so he was forced to bring out his back-up “Any Sights” gun. This features a Stolle Panda action, and Broughton 30″, 1:8″ twist 5C barrel. Both guns employ a Nightforce 8-32x56mm Benchrest Scope. John joked: “I’ve done a lot of hauling back-up guns across the country for no reason in the past, but this time it mattered a lot.”
For the “Iron Sights, Any Rifle” stages Whidden uses a .243 Win with a Gilkes-Ross action, Warner Rear Sight, and CG front sight with +0.5 diopter. As with John’s scoped .243s, this gun has an 8-twist, light Palma contour, Broughton 5C barrel. This is the same gun and 32″ barrel John used to set the Leech Cup record in 2008. It has about 650 rounds through the barrel. The chambering, as with his other “Any Rifle” guns, is a “plain vanilla .243 Win”.
.308 Palma Rifle Shooting 185gr VLDs with N140
Whidden’s .308 Winchester Palma Rifle is the same rifle we featured as our Gun of the Week Number 59 (photo below). It’s the same gun with the same barrel, a 32″ Broughton 10-twist with 5C rifling, light Palma contour. Round-count on this barrel is over 3000! John’s current .308 Win load is a very stout charge of N140 power, PMC primers, and 185gr Berger moly-coated VLDs. The brass is Lapua .308 Win with the standard large primer pocket/large flash holes. He turns his case-necks for a .333″ loaded round in a .343″-necked chamber, which was cut with the popular “95 Palma” reamer. As with his .243s, John loads his .308 ammo long and “soft-seats” his bullets with bolt closure.
Barrel Selection is Key to Running 6mm VLDs at Very High Velocities
Given John’s success with the .243 Winchester at Camp Perry, we asked him why more competitors weren’t using this cartridge at Perry. The combination of great ballistics and moderate recoil seems hard to beat. John explained: “There were several other .243s on the line. Lamar Jones, my travel partner, shot a .243, and there were a couple other guys out there. But there are more 6.5s I think. If there were an equipment list, I would be pretty certain that the 6.5-284 would be the majority in the ‘Any Rifle’ category.”
Importantly, John explained that it takes the right hardware to run the heavy 6mm bullets at high velocities. Bullet blow-up is a risk. John told us: “At the velocities I’m running the 105gr VLDs in the 243s, barrel brand selection is really important. You absolutely have to shoot a barrel that is easy on bullets to run these velocities. To avoid bullet blow-ups at these speeds, you can’t shoot barrels that have the tallest and sharpest rifling, such as you find with some cut-rifled barrels. I’m still shooting the thin-jacket Berger VLDs. I haven’t even switched to the thick-jacket bullets. To do this you need a rifling solution that is kinder to the bullet. The point I’m trying to drive home is that barrel selection is a very important factor. If my barrels didn’t work we would have smoked a lot of bullets. But that’s not the case with the Broughtons. I haven’t blown up a .243 bullet through a Broughton barrel.”
Share the post "Whidden Shares Secrets of Championship Long-Range Rifles"
The 2010 NRA National Long Range Rifle Champion is John Whidden of Whidden Gunworks. Whidden, a soft-spoken shooter from Georgia, amassed an overall score of 1243-75x, topping the USAMU’s Brandon Green (1240-60X) by three points. John was way ahead of Green in X-Count. We’re proud to see John, who provided match reports for AccurateShooter.com, back on top of the podium. As great a shooter as he is, John is one of the most humble champions you’ll ever meet. Bravo John!
This is Whidden’s third NRA Long-Range National Championship, following his Long-Range Championship wins in 2007 and 2008. Sherri Gallagher took the Long-Range Championship in 2009, but this year she must content herself with a record-breaking performance in the High Power Championship. After notching an impressive third Long-Range victory, John no doubt has his sights set on #4 and #5 in the years ahead. John would need five (5) long-range titles to tie the legendary David Tubb.
See John Whidden in action over the past four days at Camp Perry in this slide-show from the NRA:
Share the post "Whidden Wins! John Whidden Re-Captures NRA Long-Range Title"
In Saturday’s Remington Band of Brothers (BOB) match and Mustin Trophy match, class winners from each relay go into a shoot-off. Each relay’s top shooter from the Any Sight, Palma Rifle, and Service Rifle categories then lines up against the other relay winners in their class. The course of fire for the shoot-off was ten shots in thirteen minutes.
Gallagher vs. Whidden in “Sudden-Death” Shoot-out
A major drama unfolded at the end of the regular shoot-off in the Remington BOB match, as “Any Sights” competitors Michelle Gallagher and John Whidden were locked in a tie. Michelle and John had both shot 100-8x. Now, to decide the winner, a “sudden death” shot-for-shot rifle duel took place to determine the class winner. The crowd tensed as both shooters went to the line.
Both Michelle and John proceeded to hit 10s (or Xs) for the first twelve (12) shots. Then it was unlucky #13 for John. Whidden’s 13th shot was a nine, against Michelle’s ten. That gave Michelle the Remington Band of Brothers match Any Sight Class victory, but onlookers congratulated both shooters.
John Whidden redeemed himself later in the day, winning his “Any Sight” Class in the Mustin Trophy shoot-off. John posted a “best-in-class” 100-8x, making him the “Any Sight” winner. We talked to John after the match and he told us: “That was an exhausting day. Rain was forecast for the afternoon and some of the relays got heavy rain which increased the difficulty. Michelle shot great in the Band of Brothers Match, but I was pleased to come back and shoot steady for a Class win in the Mustin Match. Now we’ve got a lot of shooting ahead of us and I’ll try to stay up near the top.” John is shooting a .243 Winchester with moly 105gr Berger bullets.
In related news from Camp Perry, here are the preliminary scores for the three long range matches shot Sunday morning (August 15th). The course of fire was 20 shots, slow-fire prone at 1000 yards. The high-scoring competitor from each relay of each match will compete in the shoot-off held immediately after the the completion of the Herrick Trophy Team Match.
I have a set of Whidden Gunworks dies for my personal 6BRDX (a chambering similar to 6 Dasher but with longer neck). The dies are excellent and they produce very straight ammo. My loaded rounds (made with a Whidden bushing-type FL sizer and Whidden micrometer-top seater) are showing less than .0015″ run-out measured on the bullet, with the majority closer to .001″ run-out. (This is with Lapua Scenar L bullets, which have great jacket uniformity and concentricity.)
Cartridges loaded with my Whidden sizer and seater dies have proved very accurate. My 6BRDX is shooting in the mid-ones for five shots at 100 yards. I also have a micrometer-top Wilson inline seater die that was custom-bored with my chamber reamer. As far as I can tell, the ammo loaded with the screw-in Whidden seater is every bit as accurate as rounds loaded with the Wilson die using an arbor press. Additionally, with the Whidden micrometer die, I can hold extremely tight tolerances on base-to-bullet-ogive lengths.
Available Die Sets
There are two sides to our die business. First we are stocking dies in many calibers that are of interest to those who visit this website (such as the 6PPC, 6mm Dasher, 6.5×47 Lapua, .260 Rem, 7mm Shehane, .308 Winchester). These dies are a good fit to the “match chamber” reamers and very few people with these calibers should have to have “Pure Custom” dies made. We have both sizers and micrometer-top seaters ready to go for the many cartridge types listed above. The sizer dies will include a shoulder datum collar that makes it easy to measure shoulder “bump” during the full-length sizing process. This is important to control headspace precisely.
John Whidden, multi-time NRA Long-Range Champion, runs a stock-building enterprise, 
Model 175 Whidden Stock Design
Moving into the second day of the Long-Range National Championships, five shooters are clustered at the front with equal scores of 598 points. Leading the way, based on X-count, is our friend and Forum member John Whidden (598-36X). Just three Xs back with 598-33X is Bryan Litz, Berger’s Chief Bullet Designer and Ballistician. We’re pleased to see Forum member John Friguglietti, aka Mudcat, ranked fourth. Among the top ten, in the preliminary standings, are shooters from international squads. It’s good to see foreign competitors on the firing line at Perry this year.
Highs in the low 60s and puddles from yesterday’s rain created a chilly, muddy atmosphere for the start of the Long Range Championships. The Band of Brothers Trophy Match was the first match fired. The early scores show that the elite shooters, such as past Long-Range Champion John Whidden, brought their ‘A’ game, and are able to handle the cooler weather and cloudy skies. There were a number of 200s shot on the range this morning at the Band of Brothers match.
1. John Whidden, USA: 399-046V
John Whidden of 
John shoots the Berger 6mm 105gr VLDs because they are a proven commodity that seem to work in a variety of barrels and cartridges: “We need something that is very reliable from an accuracy standpoint, match in and match out. The 105s are more reliably accurate over a range of different cartridges, barrels, and conditions. I’ve considered using the 115s, but I’ve heard mixed results. Across the whole range of variables, the 105s and 107s always seem to work for people but I’ve heard a lot of mixed results with the 115s.”
In Saturday’s Remington Band of Brothers (BOB) match and Mustin Trophy match, class winners from each relay go into a shoot-off. Each relay’s top shooter from the Any Sight, Palma Rifle, and Service Rifle categories then lines up against the other relay winners in their class. The course of fire for the shoot-off was ten shots in thirteen minutes.
