Great Results with New Carb-Out Solvent
Our friend Boyd Allen recently tested the new Carb-Out™ product from SharpShoot-R Precision Products on a rifle that had stubborn carbon fouling. Boyd had previously applied conventional solvents which did a good job of removing copper and conventional powder fouling. However, when examining the barrel with a borescope, Boyd saw heavy “burned-in” deposits of carbon. In this situation, Boyd observed, scrubbing with an abrasive such as Iosso or JB would normally be required. But Boyd had recently received a sample of Carb-Out™ from Terry Paul, owner of SharpShoot-R. Boyd decided to give it a try: “After working with a nylon brush and patches, getting all that I could out, I was able to see heavy carbon next to the lands, extending forward. This I removed by wetting the bore with the nylon brush, letting it soak for 20 minutes, and brushing with a bronze brush. I did this twice. Previously I would have expected to have done a lot of strokes with an abrasive to get the same result, since this was a worst case situation. Being able to to remove hard carbon without the use of abrasives is a ‘great leap forward’ to steal a phrase”.
Using this regimen, Boyd was able to remove the stubborn carbon. “Carb-Out™ really works”, Boyd told us. “This was that baked-on black stuff that normal solvents won’t touch. After a good soak, the Carb-Out™ on a wet brush knocked it out.” Boyd observed, “Others may differ, but after using this stuff, I think abrasives may be a thing of the past.” Boyd also observed that a very prominent Hall of Fame Benchrest shooter recently retired his Iosso Paste and bought a carton of Carb-Out (which he uses with a brush): “If this guy, who has been at the top of the BR heap for years, believes in the stuff… that’s significant.”
While Boyd used Carb-Out™ with a bronze brush, Terry Paul says the product is designed to work well without brushing. For the typical type of carbon fouling seen in barrels, Terry says: “You simply put it on a patch or a mop and swab it thru the barrel. Carb-Out also leaves behind a protective coating that prevents future carbon adherance. This coating is less than 100th of a micron in thickness, so it will not affect first shot accuracy.” For more info, visit SharpShootR.com, or call (785) 883-4444.
What does the MSDS sheet have to say?
How safe is it. On the website they say that the product is “Relatively Safe”. Exactly what does that mean.
Finding a carbon remover is a neverending quest(I am about to try Subaru Upper Engine Cleaner). I will try Carb-Out if I can get it.
But I have a question. Is it necessary to remove ALL the carbon? Proponents of moly say to shoot 100 molys to “cure” the first 10″ of the barrel with a buildup of MDS. Why does a buildup of MDS enhance accuracy but carbon detracts? Could polishing with,say, Flitz be sufficient?