Ransom Rifle Master ‘SL Mega Rest’ — Review Part One

Ransom recently introduced the Ransom Rifle Master ‘SL Mega Rest’, a large, modular rest system for FSCA, NBRSA, and IBS shooters and other shooting disciplines that allow a rest system. We persuaded accomplished NBRSA point blank and long range shooter John Crawford to check out this system and share his experiences. This article is Part One of a two-part series.

Ransom’s SL Mega Rest: Part One (First Impressions) by John Crawford

Upon receiving the Ransom SL Mega Rest, the first thing I noticed was how well the rest was packaged. There were two boxes, a large box holding the two base plates and a small box holding all of the small parts for the rest. The large box is double-walled, cardboard construction. It held up well to the rigors of shipping, keeping the two rest halves, each in their own inner box, in perfect shape.

Unpacking the Ransom SL Mega Rest one could not help but notice the weight of each half and their very attractive, black, Rhino coating. [Rhino coating is a heavy, extremely durable and tough, textured polyurethane coating commonly sprayed in the bed area of pickup trucks to protect the bed from damage.] Unpacking the small parts, which were all packaged separately for protection, gave me a good chance to note their excellent fit and finish. The small parts are made of steel and have a black oxide finish, including the ½:20-threaded legs which have nicely knurled knobs and lock rings. The black oxide finish compliments the bases.

Front Section
The front base and post, used exclusively for elevation adjustment, are well built and have some very nice features. The post, which is 1.25″ in diameter, has a keyway and key in the front to keep it from turning, and the lockdown bolt has a carbide ball in the end to lock the post in place. The mariner’s wheel has a cogged rubber belt on the outside (fits into a groove) and makes adjusting height easy and comfortable without hand slippage. The post assembly can be located, front-to-rear, in one inch increments, to provide a center-of-front-rest-base-to-center-of-rear-rest-base distance of from 24″ to 32″, thus accommodating an 8″ difference in stock length.

The Ransom SL Mega Rest’s elevation rest top is a modular system. The base for the rest top broke tradition and has two bolts, side by side, to hold it to the post, a welcome change from having a single bolt to hold the top on. With two bolts you reduce the stress when putting a heavy rifle on the rest. The front post is mounted to a plate that bolts down to the rest base. The rest base has a series of tapped holes that allows one to adjust the front rest location, front-to-rear, to fit different stock lengths.

Rear Section
The rear rest, used exclusively for windage adjustment, has the rest top holder bolted in place. As a modular system, you can put the elevation rest top bag holder or windage top bag holder in either the front or rear rest as needed. You could also have a few different elevation rest tops or windage tops for different rifles. Both front and rear rests have a bubble level.

The Ransom SL Mega Rest’s windage top and bag holder are also modular. You can put the windage top and bag holder, or just the bag holder, in either the front or rear rest by removing four thumb screws and changing the tops. You can buy different width rest tops and swap them out in a few minutes, a nice feature for different stock length and width configurations. The windage top has a dovetail fit with a center bolt to hold the top in place and has no perceivable side play or movement, nice and tight and the windage adjusts easily.

The forearm stop is well thought out and fully adjustable for height and length to accommodate different front bag heights and stock lengths/positions. It can be adjusted forward about 4″ and, in height, from 1-1/2″ to 3-1/2″. It easily adjusts with two thumb screws.

83 pounds of Steel Solidity
The bridge plate between the front and rear rests is also black Rhino-coated, matching the bases. There are four dowel pins in the bridge plate for alignment and six 5/16-18 bolts that securely hold the bridge plate in place. The rest can be shot with the bridge plate in place, as a one-piece rest system, or the bridge plate can be removed, making it a two-piece rest system.

The rear rest with windage top weighs 38 pounds and the front rest weighs 45 pounds, for a total weight of 83 pounds. This is without sand bags or sand. Overall the all-steel-construction, Ransom SL Mega Rest is well thought out, nicely finished, and made to the standards and quality you would expect from the Ransom Company. The MSRP for the whole unit (everything except sand bags) is $1,330.00. This includes front heavy bag plate, and rear windage-adjustable bag plate. Additional plates (for different sized bags) start at about $90.00. Next step is to fill my sand bags and do some field testing. We’ll cover that in Part Two of this review, later this spring.

Similar Posts:

• Sinclair Int’l Introduces New Competition Front Rest
• Lenzi Rear Bag — Great Product from Italy, Offered by PMA Tool
• Lenzi Rear Bag — Premium Italian Leather That Works Great!
• New Protektor Model Aluminum Front Rest — Made in USA
• Lenzi Rear Bag — Premium Italian Leather, Great Functionality

Tags: 50 BMG, Heavy Gun, One-Piece Rest, Ransom Rest, Rhino Coat