Tech Tip: Measuring Shoulder Bump with Harrell’s Collar
Harrell’s Precision sells “semi-custom” full-length bushing dies for the PPC and 6BR chamberings. While the Harrell brothers do not cut the die to spec, they carry a large selection of dies made with slightly different internal dimensions. When you send in your fired brass, the Harrells choose a die from inventory with just the right amount of sizing (diameter reduction) at the top and bottom of the case. Given the quality, and precise fit, Harrell’s full-length dies are a good value at $75.00 plus shipping.
Bump Measuring Collar
The Harrell brothers provide a nice bonus item with each full-length die — a neat, little shoulder bump measuring device as shown in the photo at right. Hornady/Stoney Point sells a stand-alone tool that does the same job, but the Harrell’s bump collar is simpler and faster. To measure your shoulder bump, simply place the Harrell’s bump collar over the upper section of your deprimed case (before sizing) and measure the OAL with your calipers. The collar should seat on the shoulder without any wobble. After taking the measurement, then size the case in your full-length die, replace the collar and repeat the measurement. You want to set your die so the shoulder moves back about .001″ to .0015″ for most applications. (With semi-auto guns you may want more bump — .003″ or more.)
When measuring for shoulder bump, you need to remove the primers first. Our friend Boyd Allen explains: “Use a decapping tool or die to remove the fired primer before taking the initial measurement. When working to thousandths, even the raised edge of a crater or a slightly raised primer can throw you off by a significant amount.”
Similar Posts:
- How to "Bump" Your Cases the Right Amount when Sizing
- Measuring Shoulder "Bump" with Harrell’s Case Collar
- Measure Shoulder Bump Precisely with Harrell’s Bump Collar
- Tech Tip: Measuring Shoulder “Bump” with Harrell’s Bump Collar
- Bedeviled by Bump — When Full-Length Dies Don’t Work
Share the post "Tech Tip: Measuring Shoulder Bump with Harrell’s Collar"
Tags: Bushing, Collar, Comparator, Die, Harrell's, Shoulder Bump
When will they be available,that is the measuring collars?
Jon,
Mine came with one of their excellent dies (dasher).
I have one of their full length dies for my 6br and have had it for over a year and a bump gauge came with it.
By the way I love anything that comes from the harrel brothers.I also have their custom 90 powder throw and have had it for several years and it is as accurate as it ever was and that is very accurate and consistant.