Eurooptic vortex burris nightforce sale




teslong borescope digital camera barrel monitor


As an Amazon Associate, this site earns a commission from Amazon sales.









March 3rd, 2021

Reloading Can Be Fun … and a Stress-Reliever

Sierra Bullets Blog handloading stress relief

by Sierra Bullets Ballistic Technician Philip Mahin for Sierra Bullets Blog
A lot of calls that come into the Sierra Customer Service Center are made by shooters [of retirement age]. Most of the time the shooter used to reload back when they were [younger] and stopped in order to raise a family, pursue a career, or both. Maybe their father or grandfather taught them back in the day and they are looking for an answer to the new whatchamacallit they found on the internet. The point is they are coming back to it because it was fun.

Reloading Can Provide Stress Relief
As a father of three, a husband, a brother, a son and son-in-law, and a friend and neighbor, I get pulled in a lot of directions. In all honesty, reloading and shooting has become a stress relief for me even though I work in the shooting industry.

Sometimes, the shooting gets put on hold for other more important things but there will always be another project or repair to accomplish. There are a lot out there that have found a way to balance the work life, the family life, and the play life. I would like to applaud you on your efforts because it is a hard thing to accomplish.

Remember to take time and relieve that stress. Do something fun, especially if it is shooting that special hand-load you just made.

AccurateShooter Comment — Hand-Loading and the Creative Process
Reloading your own precise ammo can be rewarding in many ways. First it allows you a temporary escape from work pressures, “Honey-Dos”, filing your taxes — whatever. It’s just you and Mr. Rockchucker spending quality time in the loading room. Second, hand-loading is a creative process that engages the mind. During load development, you are like an inventor, selecting a powder charge, choosing the bushing size, experimenting with seating depths, working to perfect your load.

Lastly, the process of hand-loading is rewarding because you are building something start to finish. You begin with components — bullets, brass, and powder, and end up with a finished product that (hopefully) is better than the best factory ammo you could buy. It is enormously satisfying to start with piles of bullets and brass and end up with beautiful hand-loads that can deliver great accuracy.

This post originally appeared in the Sierra Bullets Blog.

Permalink Bullets, Brass, Ammo, Reloading 1 Comment »
March 3rd, 2021

Forster Co-Ax Press Features Showcased in Video

Forster Co-Ax Coax Reloading Press Grafs Grafs.com Sale Co-Axial rockchucker

In recent months, Forster Co-Ax® presses have been somewhat hard to find, as demand has out-stripped supply. But they are still worth looking for. The Co-Ax Single Stage Press accepts any standard 7/8″ X 14 reloading die, but Forster suggests using Forster Cross Bolt Lock Rings for best results. As the Co-Ax is currently back-ordered at most vendors, but you can try multiple sources.

If you are not yet familiar with the many unique features of the Forster Co-Ax, we recommend you watch the video embedded below. This shows how the press operates and highlights the design elements which set the Co-Ax apart from every other reloading press on the market.

Video Shows Special Features of Forster Co-Ax Reloading Press

Forster Co-Ax Press Video Review
This is a very thorough review of the Forster Co-Ax done by Rex Roach. This 14-minute video shows the key Co-Ax features, explaining how the floating case-holder jaws work (3:30 time-mark), how the dies are held in place (4:40 time-mark), how spent primers are captured (6:10 time-mark), and how to set the primer seating depth (10:00 time-mark). We’ve used a Co-Ax for years and we still learned a few new things by watching this detailed video. If you are considering purchasing a Co-Ax, definitely watch this video start to finish.

Forster Co-Ax Coax Reloading Press Grafs Grafs.com Sale Co-Axial rockchucker

The Co-Ax case-holder features spring-loaded, floating jaws. These jaws have two sets of openings, small and large. This allows the system to adapt to various rim diameters. The jaw plates can simply be reversed to switch from small jaw to large jaw. In the photo above, the Co-Ax is configured with the large jaw openings in the center.

Photos are screen shots from Forster Co-Ax Review by Rex Roach on YouTube.

Permalink - Videos, Gear Review, Reloading 5 Comments »
March 3rd, 2021

Marksmanship Training — PRO Tips from the USAMU

USAMU Shooting USA Pro tips

The U.S. Army Marksmanship Unit (USAMU), in cooperation with Shooting USA TV, has created a series of instructional Pro Tip pages covering a wide range of shooting disciplines. All totaled, there are more than 50 USAMU Pro Tips. Most relate to rifle marksmanship but there are also numerous tips for shotgunners and pistol shooters. Each Pro Tip entry includes multiple photos and 6-15 paragraphs, in an easy-to-follow format. Many Pro Tips also include an instructional video produced by Shooting USA. Here are three Pro Tip videos, and links to seven more Pro Tip web pages.

USAMU TOP TEN PRO TIPS

1. Reading the Wind with SGT Sherri Gallagher.
Apart from gravity, wind has the most pull on the bullet as it travels down range. Being able to accurately read the wind and mirage will greatly enhance your performance on the rifle range. National Champion, SGT Gallagher gives you some of her tips.

2. Angle Shooting with SFC (Ret.) Emil Praslick.
SFC Praslick shows you how to determine the angle to your target, and then how to include that to change your data necessary to hit your target on the first shot.

3. Rifle Grip, Stance and Body Position for 3-Gun with SFC Daniel Horner.
Professional 3-gun marksman SFC Daniel Horner, U.S. Army Marksmanship Unit (USAMU), give tips on how to properly handle a semi-automatic rifle, including grip, stance and body position.

4. Service Rifle Positions (with SFC Brandon Green)

5. Rifling and Twist Rate (with SFC Ret. Emil Praslick)

6. Setting the Right Zero (with SPC Ty Cooper)

7. Practice Drills (with SFC Lance Dement)

8. Using the Sling

9. Getting Your AR Zeroed

10. 3-Gun Rifles By Division (with SFC Daniel Horner)

USAMU Pro Tips Sherri Gallagher Emil Praslick Daniel Horner

Permalink - Videos, Competition, Shooting Skills No Comments »