Ballistol Introduces Suppressor Cleaner — Keep Your Cans Clean
Suppressors are increasing in popularity year-by-year in the USA both among hunters and tactical shooters. Suppressors (aka “silencers” or “cans”) dramatically reduce sound volume by 25-35 decibels. However, over time, suppressors can get fouled with propellant residues and hard carbon. Accordingly, on a regular basis, you’ll want to clean your suppressor.
Ballistol USA recently introduced a new Suppressor Cleaner which has proven quite effective. This acid-free cleaner also works very well to remove fouling and hard carbon on muzzle brakes. Shown above is a Cleaning Pack with two, 16.9 oz. bottles of Ballistol Suppressor Cleaner, and one pack of rubber corks which are used when filling a suppressor with the liquid cleaner.
With this Ballistol Suppressor Cleaner, it is relatively easy to clean the inside of a suppressor with a simple process. After removing the suppressor, plug one end with a rubber cork, fill with fluid, plug the other end, then wait 2-4 hours. Then drain and rinse. Ballistol states this “solves the common problems inherent with cleaning suppressors.” Ballistol USA president Patrick Palumbo explains: “Not only is it an excellent suppressor cleaner, but it does a great job at removing any stubborn fouling. I really like using this to clean AR bolts and muzzle brakes as well.”
The Suppressor Cleaner product description states: “The Suppressor Cleaner dissolves and neutralizes combustion residues. Suppressors are particularly difficult to clean if they cannot be dismantled. Although carbon suppressors with narrow sections on fins and small holes improve the performance of the suppressors, the suppressor cleaning is much more difficult. With the Ballistol Suppressor Cleaner, the residues in the dirty suppressor can be easily cleaned out. Suitable also for use in a sonic cleaner.”
Instructions: “Close suppressor on one side with rubber corks and fill completely. Leave the cleaner in the suppressor for at least 2 hours. All combustion residues will be dissolved automatically. In the case of suppressors with particularly high firing loads, heat the cleaner to approx. 40 °C and extend the exposure time to at least 4 hours. Then remove the cleaner. To dissolve remaining dirt, fill half of the damper with clear water. Close the second opening and shake vigorously. If necessary, repeat this rinsing process until the water no longer contains soot particles. If the suppressor cannot be closed (due to its design), it can be completely immersed in the cleaner. Also suitable for dismountable silencers. Insert dirty parts and clean with a brush and water after the reaction time.”
Similar Posts:
- Non-Toxic Ballistol Lube Works Great for Case Sizing
- Yes You Need to Clean Muzzle Brakes — Here’s How to Do It
- New Tactical Advantage Cleaner from the Makers of Wipe-Out
- Muzzle Brakes Do Need Regular Cleaning — Here’s How to Do It
- Yes Muzzle Brakes Need Regular Cleaning!
Share the post "Ballistol Introduces Suppressor Cleaner — Keep Your Cans Clean"
Tags: Ballistol, Can Cleaner, Combustion Residue, Silencer Maintenance, SilencerCo, Silencers, Suppressor Cleaner
